table of contents
other versions
- wheezy 20120510dfsg0-1
foo2xqx-wrapper(1) | General Commands Manual | foo2xqx-wrapper(1) |
rr_n {.nr rr_n 0 1 foo2xqx-wrapper - Convert Postscript
into a XQX printer stream foo2xqx-wrapper [options]
[ps-file] foo2xqx-wrapper is a Foomatic compatible printer
wrapper for the foo2xqx printer driver. This script reads a Postscript
ps-file or standard input and converts it to XQX printer format for
driving the HP LaserJet P1005/P1006/P1007/P1008, the HP LaserJet P1505, the HP
LaserJet P2014, the HP LaserJet M1005 MFP, the HP LaserJet M1120 MFP, and
other XQX-based printers.
This script can be used in a standalone fashion, but is intended to be called
from a printer spooler system which uses the Foomatic printer database.
These are the options used to select the parameters of a print job that are
usually controlled on a per job basis.
/usr/bin/foo2xqx-wrapper foo2xqx(1), xqxdecode(1) Rick
Richardson <rick.richardson@comcast.net>
http://foo2xqx.rkkda.com/
- -d duplex
- Duplex code to send to printer [1].
1 off 2 long edge 3 short edge
- -m media
- Media code to send to printer [1].
Media M1005 standard 1 transparency 2 envelope 257 letterhead 259 thick 261 postcard 262 labels 263
- -p paper
- Paper size code to send to printer [1].
1 letter 9 A4 5 legal 11 A5 7 executive 13 B5 20 env #10 27 env DL 28 env C5 34 env B5 37 env Monarch 257 16k 197x273 263 16k 184x260 263 16k 195x270
- -n copies
- Number of copies [1].
- -r xresxyres
- Set device resolution in pixels/inch [1200x600].
- -s source
- Source (Input Slot) code to send to printer [7].
1 upper 4 manual 2 lower 7 auto
- -t
- Draft mode. Every other pixel is white.
- -T density
- Print density (1-5). The default is 3 (medium).
- -2 -3 -4 -5 -6 -8 -9 -10 -12 -14 -15 -16 -18
- Print in N-up. Requires the psutils package.
- -o orient
- Orientation used for N-up.
Portrait -op (normal) Landscape -ol (rotated 90 degrees anticlockwise) Seascape -os (rotated 90 degrees clockwise)
- -u xoffxyoff
- Set the offset of the start of the printable region from the upper left corner, in pixels [varies with paper size]. The defaults should work on the 2200DL and 2300DL, and have not been tested on any other printers.
- -l xoffxyoff
- Set the offset of the end of the printable region from the lower right corner, in pixels [varies with paper size]. The defaults should work on the 2200DL and 2300DL, and have not been tested on any other printers.
- -L mask
- Send the logical clipping values from -u/-l in the
ZjStream. foo2xqx-wrapper always runs Ghostscript with the ideal
page dimensions, so that the scale of the image is correct, regardless
whether or not the printer has unprintable regions. This option is used to
move the position of the clipped image back to where it belongs on the
page. The default is to send the amount which was clipped by -u and -l,
and should be good in most cases.
0 don't send any logical clipping amounts 1 only send Y clipping amount 2 only send X clipping amount 3 send both X and Y clipping amounts
- -D level
- Set Debug level [0].
foo2xqx-wrapper testpage.ps > testpage.xqx xqxdecode < testpage.xqx lpr -P raw testpage.xqx
Wed May 23 16:07:49 2012 | foo2xqx-wrapper 0.0 |