table of contents
other versions
- wheezy 20120510dfsg0-1
foo2lava(1) | General Commands Manual | foo2lava(1) |
rr_n {.nr rr_n 0 1 foo2lava - Convert Ghostscript
pbmraw or bitcmyk format into a LAVAFLOW or a OPL printer stream
foo2lava [options] <pbmraw-file >lava-file
foo2lava [options] <bitcmyk-file >lava-file
foo2lava [options] <pksmraw-file >lava-file
foo2lava converts Ghostscript pbmraw, bitcmyk, or pksmraw output
formats to monochrome or color LAVAFLOW or OPL streams, for driving the Konica
Minolta magicolor 2530 DL network color laser printer, the Konica Minolta
magicolor 2480/2480 MF AIO printer, and other Zenographics-based LAVAFLOW
printers.
These are the options used to select the parameters of a print job that are
usually controlled on a per job basis.
Create a color LAVAFLOW stream:
/usr/bin/foo2lava foo2lava-wrapper(1), lavadecode(1) Rick
Richardson <rick.richardson@comcast.com>
http://foo2zjs.rkkda.com/
- -c
- Force color mode if autodetect doesn't work.
- -d duplex
- Duplex code to send to printer [1].
1 off 2 long edge 3 short edge
- -g xpixxypix
- Set page dimensions in pixels [10200x6600].
- -m media
- Media code to send to printer [0].
Media 2530DL plain 0 transparency 4 thick stock 20 envelope 22 letterhead 23 postcard 25 labels 26 recycled 27
- -p paper
- Paper code to send to printer [2].
1 executive 25 A5 2 letter 26 A4 3 legal 45 B5jis 80 env Monarch 65 B5iso 81 env #10 90 env DL 91 env C5 92 env C6 835 4x6" photo 837 10x15cm photo
- -n copies
- Number of copies [1].
- -r xresxyres
- Set device resolution in pixels/inch [1200x600].
- -s source
- Source (InputSlot) code to send to printer [255].
1 Tray 1 255 auto 4 Tray 2
- -t
- Draft mode. Every other pixel is white.
- -J filename
- Filename string to send to printer.
- -U username
- Username string to send to printer. These are the options used to customize the operation of foo2lava for a particular printer.
- -u xoffxyoff
- Set the offset of the start of the printable region from the upper left corner, in pixels [0x0].
- -l xoffxyoff
- Set the offset of the end of the printable region from the lower right corner, in pixels [0x0].
- -L mask
- Send logical clipping amounts implied by -u/-l in the
LAVAFLOW stream [3].
0 don't send any logical clipping amounts 1 only send Y clipping amount 2 only send X clipping amount 3 send both X and Y clipping amounts
- -A
- AllIsBlack: convert C=1,M=1,Y=1 to just K=1. Works with bitcmyk input only.
- -B
- BlackClears: K=1 forces C,M,Y to 0. Works with bitcmyk input only.
- -z model
- Model. The default is [0].
model protocol Description 0 LAVAFLOW magicolor 2490 MF 0 LAVAFLOW magicolor 2530 DL 1 OPL magicolor 2480 MF 2 LAVAFLOW magicolor 1600W 2 LAVAFLOW magicolor 1680MF 2 LAVAFLOW magicolor 1690MF
- -S plane
- Output just a single color plane from a color print and
print it on the black plane. The default is to output all color planes.
1 Cyan 2 Magenta 3 Yellow 4 Black
- -D level
- Set Debug level [0].
gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE -sPAPERSIZE=letter -r1200x600 -sDEVICE=pbmraw -sOutputFile=- - < testpage.ps | foo2lava -r1200x600 -g10200x6600 -p1 >testpage.zm
gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE -sPAPERSIZE=letter -g10200x6600 -r1200x600 -sDEVICE=bitcmyk -sOutputFile=- - < testpage.ps | foo2lava -r1200x600 -g10200x6600 -p1 >testpage.zc
Wed May 23 16:07:49 2012 | foo2lava 0.0 |