table of contents
other versions
- wheezy 20120510dfsg0-1
foo2lava-wrapper(1) | General Commands Manual | foo2lava-wrapper(1) |
rr_n {.nr rr_n 0 1 foo2lava-wrapper - Convert
Postscript into a LAVAFLOW or OPL printer stream foo2lava-wrapper
[options] [ps-file] foo2lava-wrapper is a Foomatic
compatible printer wrapper for the foo2lava printer driver. This script
reads a Postscript ps-file or standard input and converts it to
Zenographics LAVAFLOW printer format for driving the Konica Minolta magicolor
1600W color laser printer, the Konica Minolta magicolor 1680MF/1690MF AIO
printer, the Konica Minolta magicolor 2480/2490 MF AIO printer, the Konica
Minolta magicolor 2530 DL network color laser printer, and other
Zenographics-based LAVAFLOW printers.
This script can be used in a standalone fashion, but is intended to be called
from a printer spooler system which uses the Foomatic printer database.
These are the options used to select the parameters of a print job that are
usually controlled on a per job basis.
Create a color LAVAFLOW stream from a Postscript document:
/usr/bin/foo2lava-wrapper foo2lava(1), lavadecode(1)
opldecode(1) Rick Richardson <rick.richardson@comcast.net>
http://foo2zjs.rkkda.com/
- -c
- Print in color (else monochrome).
- -C colormode
- Color correction mode [0].
1 Photos (using m2300w CRDs) 2 Photos and text (using m2300w CRDs) 3 Graphics and text (using m2300w CRDs) 10 ICM color profile (using -G *.icm file)
- -d duplex
- Duplex code to send to printer [1].
1 off 2 long edge 3 short edge
- -m media
- Media code to send to printer [0].
Media 2530DL plain 0 transparency 4 thick stock 20 envelope 22 letterhead 23 postcard 25 labels 26 recycled 27
- -p paper
- Paper size code to send to printer [2].
1 executive 25 A5 2 letter 26 A4 3 legal 45 B5jis 80 env Monarch 65 B5iso 81 env #10 90 env DL 91 env C5 92 env B5 835 4x6" photo 837 10x15cm photo
- -n copies
- Number of copies [1].
- -r xresxyres
- Set device resolution in pixels/inch [1200x600].
- -s source
- Source (Input Slot) code to send to printer [255].
1 Tray 1 255 auto 4 Tray 2
- -t
- Draft mode. Every other pixel is white.
- -2 -3 -4 -5 -6 -8 -9 -10 -12 -14 -15 -16 -18
- Print in N-up. Requires the psutils package.
- -o orient
- Orientation used for N-up.
Portrait -op (normal) Landscape -ol (rotated 90 degrees anticlockwise) Seascape -os (rotated 90 degrees clockwise)
- -u xoffxyoff
- Set the offset of the start of the printable region from the upper left corner, in pixels [varies with paper size]. The defaults should work on the 2200DL and 2300DL, and have not been tested on any other printers.
- -l xoffxyoff
- Set the offset of the end of the printable region from the lower right corner, in pixels [varies with paper size]. The defaults should work on the 2200DL and 2300DL, and have not been tested on any other printers.
- -L mask
- Send the logical clipping values from -u/-l in the LAVAFLOW
stream. foo2lava-wrapper always runs Ghostscript with the ideal
page dimensions, so that the scale of the image is correct, regardless
whether or not the printer has unprintable regions. This option is used to
move the position of the clipped image back to where it belongs on the
page. The default is to send the amount which was clipped by -u and -l,
and should be good in most cases.
0 don't send any logical clipping amounts 1 only send Y clipping amount 2 only send X clipping amount 3 send both X and Y clipping amounts
- -z model
- Model. The default is [0].
model protocol Description 0 LAVAFLOW magicolor 2490 MF 0 LAVAFLOW magicolor 2530 DL 1 OPL magicolor 2480 MF 2 LAVAFLOW magicolor 1600W 2 LAVAFLOW magicolor 1680MF 2 LAVAFLOW magicolor 1690MF
- -g gsopts
- Additional options to pass to Ghostscript, such as -g“-dDITHERPPI=nnn”, etc. This option may appear more than once.
- -G profile.icm
- Convert profile.icm to a Postscript color rendering dictionary (CRD) using foo2zjs-icc2ps and adjust the printer colors by using the Postscript setcolorrendering operator. (WORK IN PROGRESS).
- -G gamma-file.ps
- Prepend gamma-file.ps to the Postscript input to
perform color correction using the setcolortransfer Postscript
operator. For example, the file might contain:
- -I intent
- Select profile intent from the ICM file. 0=Perceptual, 1=Colorimetric, 2=Saturation, 3=Absolute. Default is 0 (perceptual). These options are used for debugging foo2lava and its wrapper.
- -S plane
- Output just a single color plane from a color print and
print it on the black plane. The default is to output all color planes.
1 Cyan 2 Magenta 3 Yellow 4 Black
- -D level
- Set Debug level [0].
foo2lava-wrapper testpage.ps > testpage.zm lavadecode < testpage.zm lpr -P raw testpage.zm
foo2lava-wrapper -c testpage.ps > testpage.zc
Wed May 23 16:07:49 2012 | foo2lava-wrapper 0.0 |