NAME¶
tripplitesu - Driver for Tripp-Lite SmartOnline (SU) UPS equipment
NOTE¶
This man page only documents the hardware-specific features of the tripplitesu
driver. For information about the core driver, see
nutupsdrv(8).
SUPPORTED HARDWARE¶
This driver supports the Tripp Lite SmartOnline family (via the serial port).
This driver supports the following optional settings in the
ups.conf(5):
lowbatt=
num
Set the low battery warning threshold in
percent at which shutdown is initiated by
upsmon(8). By default, the
UPS may not report low battery until there are only a few seconds left. Common
values are around 25—30.
AUTHOR¶
Allan N. Hessenflow <allanh@kallisti.com>
SEE ALSO¶
The core driver:¶
nutupsdrv(8)
Other drivers for Tripp-Lite hardware:¶
tripplite(8),
tripplite_usb(8),
usbhid-ups(8)
Internet resources:¶
The NUT (Network UPS Tools) home page:
http://www.networkupstools.org/