NAME¶
tripplitesu - Driver for Tripp-Lite SmartOnline (SU) UPS equipment
NOTE¶
This man page only documents the hardware-specific features of the tripplitesu
driver. For information about the core driver, see
nutupsdrv(8).
SUPPORTED HARDWARE¶
This driver supports the Tripp Lite SmartOnline family (via the serial port).
This driver supports the following optional settings in the
ups.conf(5):
lowbatt=
num
Set the low battery warning threshold in percent at which
shutdown is initiated by
upsmon(8). By default, the UPS may not report
low battery until there are only a few seconds left. Common values are around
25—30.
AUTHOR¶
Allan N. Hessenflow <allanh@kallisti.com>
SEE ALSO¶
The core driver:¶
nutupsdrv(8)
Other drivers for Tripp-Lite hardware:¶
tripplite(8),
tripplite_usb(8),
usbhid-ups(8)
Internet resources:¶
The NUT (Network UPS Tools) home page:
http://www.networkupstools.org/