table of contents
other versions
- wheezy 1:1.7.10.4-1+wheezy3
- wheezy-backports 1:1.9.1-1~bpo70+2
- jessie 1:2.1.4-2.1+deb8u2
- jessie-backports 1:2.11.0-3~bpo8+1
- testing 1:2.11.0-3
- unstable 1:2.11.0-4
- experimental 1:2.13.1+next.20170610-1
GIT-ADD(1) | Git Manual | GIT-ADD(1) |
NAME¶
git-add - Add file contents to the indexSYNOPSIS¶
git add [-n] [-v] [--force | -f] [--interactive | -i] [--patch | -p] [--edit | -e] [--all | [--update | -u]] [--intent-to-add | -N] [--refresh] [--ignore-errors] [--ignore-missing] [--] [<filepattern>...]
DESCRIPTION¶
This command updates the index using the current content found in the working tree, to prepare the content staged for the next commit. It typically adds the current content of existing paths as a whole, but with some options it can also be used to add content with only part of the changes made to the working tree files applied, or remove paths that do not exist in the working tree anymore.OPTIONS¶
<filepattern>...Files to add content from. Fileglobs (e.g.
*.c) can be given to add all matching files. Also a leading directory name
(e.g. dir to add dir/file1 and dir/file2) can be given to add all files in the
directory, recursively.
-n, --dry-run
Don’t actually add the file(s), just
show if they exist and/or will be ignored.
-v, --verbose
Be verbose.
-f, --force
Allow adding otherwise ignored files.
-i, --interactive
Add modified contents in the working tree
interactively to the index. Optional path arguments may be supplied to limit
operation to a subset of the working tree. See “Interactive mode”
for details.
-p, --patch
Interactively choose hunks of patch between
the index and the work tree and add them to the index. This gives the user a
chance to review the difference before adding modified contents to the index.
This effectively runs add --interactive, but bypasses the initial command menu
and directly jumps to the patch subcommand. See “Interactive mode”
for details.
-e, --edit
Open the diff vs. the index in an editor and
let the user edit it. After the editor was closed, adjust the hunk headers and
apply the patch to the index.
The intent of this option is to pick and choose lines of the patch to apply, or
even to modify the contents of lines to be staged. This can be quicker and
more flexible than using the interactive hunk selector. However, it is easy to
confuse oneself and create a patch that does not apply to the index. See
EDITING PATCHES below.
-u, --update
Only match <filepattern> against already
tracked files in the index rather than the working tree. That means that it
will never stage new files, but that it will stage modified new contents of
tracked files and that it will remove files from the index if the
corresponding files in the working tree have been removed.
If no <filepattern> is given, default to "."; in other words,
update all tracked files in the current directory and its
subdirectories.
-A, --all
Like -u, but match <filepattern> against
files in the working tree in addition to the index. That means that it will
find new files as well as staging modified content and removing files that are
no longer in the working tree.
-N, --intent-to-add
Record only the fact that the path will be
added later. An entry for the path is placed in the index with no content.
This is useful for, among other things, showing the unstaged content of such
files with git diff and committing them with git commit -a.
--refresh
Don’t add the file(s), but only refresh
their stat() information in the index.
--ignore-errors
If some files could not be added because of
errors indexing them, do not abort the operation, but continue adding the
others. The command shall still exit with non-zero status. The configuration
variable add.ignoreErrors can be set to true to make this the default
behaviour.
--ignore-missing
This option can only be used together with
--dry-run. By using this option the user can check if any of the given files
would be ignored, no matter if they are already present in the work tree or
not.
--
This option can be used to separate
command-line options from the list of files, (useful when filenames might be
mistaken for command-line options).
CONFIGURATION¶
The optional configuration variable core.excludesfile indicates a path to a file containing patterns of file names to exclude from git-add, similar to $GIT_DIR/info/exclude. Patterns in the exclude file are used in addition to those in info/exclude. See gitrepository-layout(5).EXAMPLES¶
•Adds content from all *.txt files under
Documentation directory and its subdirectories:
Note that the asterisk * is quoted from the shell in this example; this lets the
command include the files from subdirectories of Documentation/
directory.
$ git add Documentation/\*.txt
•Considers adding content from all
git-*.sh scripts:
Because this example lets the shell expand the asterisk (i.e. you are listing
the files explicitly), it does not consider subdir/git-foo.sh.
$ git add git-*.sh
INTERACTIVE MODE¶
When the command enters the interactive mode, it shows the output of the status subcommand, and then goes into its interactive command loop.*** Commands *** 1: status 2: update 3: revert 4: add untracked 5: patch 6: diff 7: quit 8: help What now> 1
This shows the change between HEAD and index
(i.e. what will be committed if you say git commit), and between index and
working tree files (i.e. what you could stage further before git commit using
git add) for each path. A sample output looks like this:
It shows that foo.png has differences from HEAD (but that is binary so line
count cannot be shown) and there is no difference between indexed copy and the
working tree version (if the working tree version were also different,
binary would have been shown in place of nothing). The other
file, git-add--interactive.perl, has 403 lines added and 35 lines deleted if
you commit what is in the index, but working tree file has further
modifications (one addition and one deletion).
update
staged unstaged path 1: binary nothing foo.png 2: +403/-35 +1/-1 git-add--interactive.perl
This shows the status information and issues
an "Update>>" prompt. When the prompt ends with double
>>, you can make more than one selection, concatenated with
whitespace or comma. Also you can say ranges. E.g. "2-5 7,9" to
choose 2,3,4,5,7,9 from the list. If the second number in a range is omitted,
all remaining patches are taken. E.g. "7-" to choose 7,8,9 from the
list. You can say * to choose everything.
What you chose are then highlighted with *, like this:
To remove selection, prefix the input with - like this:
After making the selection, answer with an empty line to stage the contents of
working tree files for selected paths in the index.
revert
staged unstaged path 1: binary nothing foo.png * 2: +403/-35 +1/-1 git-add--interactive.perl
Update>> -2
This has a very similar UI to update,
and the staged information for selected paths are reverted to that of the HEAD
version. Reverting new paths makes them untracked.
add untracked
This has a very similar UI to update
and revert, and lets you add untracked paths to the index.
patch
This lets you choose one path out of a
status like selection. After choosing the path, it presents the diff
between the index and the working tree file and asks you if you want to stage
the change of each hunk. You can select one of the following options and type
return:
After deciding the fate for all hunks, if there is any hunk that was chosen, the
index is updated with the selected hunks.
You can omit having to type return here, by setting the configuration variable
interactive.singlekey to true.
diff
y - stage this hunk n - do not stage this hunk q - quit; do not stage this hunk nor any of the remaining ones a - stage this hunk and all later hunks in the file d - do not stage this hunk nor any of the later hunks in the file g - select a hunk to go to / - search for a hunk matching the given regex j - leave this hunk undecided, see next undecided hunk J - leave this hunk undecided, see next hunk k - leave this hunk undecided, see previous undecided hunk K - leave this hunk undecided, see previous hunk s - split the current hunk into smaller hunks e - manually edit the current hunk ? - print help
This lets you review what will be committed
(i.e. between HEAD and index).
EDITING PATCHES¶
Invoking git add -e or selecting e from the interactive hunk selector will open a patch in your editor; after the editor exits, the result is applied to the index. You are free to make arbitrary changes to the patch, but note that some changes may have confusing results, or even result in a patch that cannot be applied. If you want to abort the operation entirely (i.e., stage nothing new in the index), simply delete all lines of the patch. The list below describes some common things you may see in a patch, and which editing operations make sense on them. added contentAdded content is represented by lines
beginning with "+". You can prevent staging any addition lines by
deleting them.
removed content
Removed content is represented by lines
beginning with "-". You can prevent staging their removal by
converting the "-" to a " " (space).
modified content
Modified content is represented by
"-" lines (removing the old content) followed by "+" lines
(adding the replacement content). You can prevent staging the modification by
converting "-" lines to " ", and removing "+"
lines. Beware that modifying only half of the pair is likely to introduce
confusing changes to the index.
Content which does not differ between the
index and working tree may be shown on context lines, beginning with a "
" (space). You can stage context lines for removal by converting the
space to a "-". The resulting working tree file will appear to
re-add the content.
modifying existing content
One can also modify context lines by staging
them for removal (by converting " " to "-") and adding a
"+" line with the new content. Similarly, one can modify
"+" lines for existing additions or modifications. In all cases, the
new modification will appear reverted in the working tree.
new content
You may also add new content that does not
exist in the patch; simply add new lines, each starting with "+".
The addition will appear reverted in the working tree.
•adding context (" ") or
removal ("-") lines
•deleting context or removal lines
•modifying the contents of context or
removal lines
SEE ALSO¶
git-status(1) git-rm(1) git-reset(1) git-mv(1) git-commit(1) git-update-index(1)GIT¶
Part of the git(1) suite03/19/2016 | Git 1.7.10.4 |