NAME¶
cupsaddsmb - export printers to samba for windows clients
SYNOPSIS¶
cupsaddsmb [ -H
samba-server ] [ -U
samba-user[%samba-password] ] [ -h
cups-server[:port] ] [ -v ]
-a
cupsaddsmb [ -H
samba-server ] [ -U
samba-user[%samba-password] ] [ -h
cups-server[:port] ] [ -v ]
printer [ ... printer ]
DESCRIPTION¶
cupsaddsmb exports printers to the SAMBA software (version 2.2.0 or
higher) for use with Windows clients. Depending on the SAMBA configuration,
you may need to provide a password to export the printers. This program
requires the Windows printer driver files described below.
OPTIONS¶
cupsaddsmb supports the following options:
- -H samba-server
-
Specifies the SAMBA server which defaults to the CUPS server.
- -U samba-user[%samba-password]
-
Specifies the SAMBA print admin username which defaults to your current
username. If the username contains a percent (%) character, then the text
following the percent is treated as the SAMBA password to use.
- -a
-
Exports all known printers. Otherwise only the named printers are
exported.
- -h cups-server[:port]
-
Specifies a different CUPS server to use.
- -v
-
Specifies that verbose information should be shown. This is useful for
debugging SAMBA configuration problems.
SAMBA CONFIGURATION¶
cupsaddsmb uses the new RPC-based printing support in SAMBA 2.2.x to
provide printer drivers and PPD files to Windows client machines. In order to
use this functionality, you must first configure the SAMBA
smb.conf(5)
file to support printing through CUPS and provide a printer driver download
share, as follows:
[global]
load printers = yes
printing = cups
printcap name = cups
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
public = yes
guest ok = yes
writable = no
printable = yes
[print$]
comment = Printer Drivers
path = /etc/samba/drivers
browseable = yes
guest ok = no
read only = yes
write list = root
This configuration assumes a FHS-compliant installation of SAMBA; adjust the
[printers] and [print$] share paths accordingly on your system as needed.
MICROSOFT POSTSCRIPT DRIVERS FOR WINDOWS¶
The base driver for Windows 2000 and higher is the Microsoft PostScript driver,
which is available on any system running Windows 2000 or higher in the
%WINDIR%\SYSTEM32\SPOOL\DRIVERS\W32X86\3 folder for 32-bit drivers and
%WINDIR%\SYSTEM32\SPOOL\DRIVERS\X64\3 folder for 64-bit drivers.
The CUPS printer driver is preferred over the Microsoft driver since it supports
the page-label, job-billing, and job-hold-until options fully on all printers.
However, currently only Windows 2000 and higher is supported by the Microsoft
driver, so you will also need to get the Adobe driver to support Windows 95,
98, and Me clients. The Adobe and Microsoft drivers for Windows 2000 are
identical.
Once you have extracted the driver files, copy the 32-bit drivers to the
/usr/share/cups/drivers directory and the 64-bit drivers to the
/usr/share/cups/drivers/x64 directory exactly as named below:
[Windows 2000 and higher]
ps5ui.dll
pscript.hlp
pscript.ntf
pscript5.dll
Note: Unlike Windows, case is significant - make sure that you use the
lowercase filenames shown above, otherwise
cupsaddsmb will fail to
export the drivers.
CUPS POSTSCRIPT DRIVERS FOR WINDOWS¶
cupsaddsmb can use the CUPS v6 PostScript printer driver for Windows,
which is available for download from the CUPS web site.
The CUPS printer driver is preferred over the Adobe and Microsoft drivers since
it supports the page-label, job-billing, and job-hold-until options fully on
all printers. However, currently only Windows 2000 and higher is supported by
the CUPS driver, so you will also need to get the Adobe driver to support
Windows 95, 98, and Me clients.
Once you have extracted the driver files, copy the 32-bit drivers to the
/usr/share/cups/drivers directory and the 64-bit drivers to the
/usr/share/cups/drivers/x64 directory exactly as named below:
[Windows 2000 and higher]
cups6.inf (from www.cups.org)
cups6.ini (from www.cups.org)
cupsps6.dll (from www.cups.org)
cupsui6.dll (from www.cups.org)
ps5ui.dll (from your Windows system)
pscript.hlp (from your Windows system)
pscript.ntf (from your Windows system)
pscript5.dll (from your Windows system)
Note: Unlike Windows, case is significant - make sure that you use the
lowercase filenames shown above, otherwise
cupsaddsmb will fail to
export the drivers.
ADOBE POSTSCRIPT DRIVERS FOR WINDOWS 95, 98, AND ME¶
cupsaddsmb can use the Adobe PostScript printer driver for Windows 95,
98, and ME, which are available for download from the Adobe web site
(
http://www.adobe.com).
The Adobe driver does not support the page-label, job-billing, or job-hold-until
options.
Once you have installed the driver on a Windows system, copy the following files
to the
/usr/share/cups/drivers directory exactly as named below:
[Windows 95, 98, and Me]
ADFONTS.MFM
ADOBEPS4.DRV
ADOBEPS4.HLP
ICONLIB.DLL
PSMON.DLL
Note: Unlike Windows, case is significant - make sure that you use the
UPPERCASE filenames shown above, otherwise
cupsaddsmb will fail to
export the drivers.
KNOWN ISSUES¶
Getting the full set of Windows driver files should be easier.
SEE ALSO¶
smbd(8),
smb.conf(5),
http://localhost:631/help
http://www.cups.org/windows/
COPYRIGHT¶
Copyright 2007-2011 by Apple Inc.