table of contents
APTITUDE(8) | Command-line reference | APTITUDE(8) |
NAME¶
aptitude - Benutzerschnittstelle für den PaketmanagerSYNOPSIS¶
aptitude
[< Optionen>...] {autoclean | clean | forget-new | keep-all |
update}
aptitude
[< Optionen>...] {full-upgrade | safe-upgrade}
[<Pakete>...]
aptitude
[< Optionen>...] {changelog | download | forbid-version | hold |
install | markauto | purge | reinstall | remove | show | unhold | unmarkauto |
versions>} < Pakete>...
aptitude
extract-cache-subset < output-directory>
<packages>...
aptitude
[< Optionen>...] search <Suchmuster>...
aptitude
[< options>...] {add-user-tag | remove-user-tag}
<tag> < packages>...
aptitude
[< options>...] {why | why-not} [<patterns>...]
<package>
aptitude
[-S < Dateiname>] [--autoclean-on-startup |
--clean-on-startup | -i | -u]
aptitude
help
BESCHREIBUNG¶
COMMAND-LINE ACTIONS¶
Das erste Argument, das nicht mit einem Minus (“ -”) beginnt, wird als Befehl an das Programm angesehen. Wenn kein Befehl übergeben wird, startet aptitude im visuellen Modus. Die folgenden Befehle sind verfügbar: installInstall one or more packages. The packages
should be listed after the “install” command; if a package name
contains a tilde character (“ ~”) or a question mark
(“ ?”), it will be treated as a search pattern and every
package matching the pattern will be installed (see the section “Search
Patterns” in the aptitude reference manual).
To select a particular version of the package, append “
=< version>” to the package name: for
instance, “ aptitude install apt=0.3.1”. Similarly, to
select a package from a particular archive, append “
/<archive>” to the package name: for
instance, “ aptitude install apt/experimental”. You cannot
specify both an archive and a version for a package.
Not every package listed on the command line has to be installed; you can tell
aptitude to do something different with a package by appending an
“override specifier” to the name of the package. For example,
aptitude remove wesnoth+ will install wesnoth, not remove it.
The following override specifiers are available:
< package>+
“ install” ohne weitere Argumente wird eventuelle
gespeicherten anstehenden Befehle ausführen.
Note
Once you enter Y at the final confirmation prompt, the “
install” command will modify aptitude's stored information
about what actions to perform. Therefore, if you issue (e.g.) the command
“ aptitude install foo bar” and then abort the installation
once aptitude has started downloading and installing packages, you will
need to run “ aptitude remove foo bar” to cancel that
order.
remove, purge, hold, unhold, keep,
reinstall
Install < package>.
< package>+M
Install < package> and
immediately mark it as automatically installed (note that if nothing depends
on < package>, this will cause it to be immediately
removed).
< package>-
Remove < package>.
< package>_
Purge < package>: remove it and
all its associated configuration and data files.
< package>=
Place < package> on hold: cancel
any active installation, upgrade, or removal, and prevent this package from
being automatically upgraded in the future.
< package>:
Keep < package> at its current
version: cancel any installation, removal, or upgrade. Unlike
“hold” (above) this does not prevent automatic upgrades in the
future.
< package>&M
Mark < package> as having been
automatically installed.
< package>&m
Mark < package> as having been
manually installed.
These commands are the same as “
install”, but apply the named action to all packages given on the
command line for which it is not overridden. The difference between
hold and keep is that hold will cause a package to be
ignored by future safe-upgrade or full-upgrade commands, while
keep merely cancels any scheduled actions on the package. unhold
will allow a package to be upgraded by future safe-upgrade or
full-upgrade commands, without otherwise altering its state.
Zum Beispiel löscht “ aptitude remove '~ndeity'” alle
Pakete, deren Name “deity” enthält.
markauto, unmarkauto
Pakete als automatisch bzw. manuell
installiert markieren. Sie können Pakete mit derselben Syntax angeben wie
oben bei “ install” beschrieben. Beispielsweise wird
“ aptitude markauto '~slibs'” alle Pakete im Bereich (
s wie “section”) “libs” als automatisch
installiert markieren.
Weitere Informationen zu automatisch installierten Paketen finden Sie unter
“Managing Automatically Installed Packages” in der
aptitude-Benutzeranleitung.
build-depends, build-dep
Satisfy the build-dependencies of a package.
Each package name may be a source package, in which case the build
dependencies of that source package are installed; otherwise, binary packages
are found in the same way as for the “ install” command,
and the build-dependencies of the source packages that build those binary
packages are satisfied.
If the command-line parameter --arch-only is present, only
architecture-dependent build dependencies (i.e., not
Build-Depends-Indep or Build-Conflicts-Indep) will be
obeyed.
forbid-version
Verbieten, ein Paket auf eine bestimmte
Version zu aktualisieren. Dies wird aptitude daran hindern, das Paket
automatisch auf die angegebene Version zu aktualisieren, jedoch Upgrades auf
spätere Versionen zulassen. Standardmäßig wird aptitude
die Version verbieten, auf die normalerweise aktualisiert werden würde;
Sie können aber durch Anhängen von “
=<version>” eine bestimmte Version angeben.
Beispiel: “ aptitude forbid-version vim=1.2.3.broken-4”.
This command is useful for avoiding broken versions of packages without having
to set and clear manual holds. If you decide you really want the forbidden
version after all, “ aptitude install
<package>” will remove the ban.
update
Die Liste der verfügbaren Pakete von den
apt-Quellen erneuern. (Dies ist äquivalent zu “ apt-get
update”.)
safe-upgrade
Upgrades installed packages to their most
recent version. Installed packages will not be removed unless they are unused
(see the section “Managing Automatically Installed Packages” in
the aptitude reference manual). Packages which are not currently
installed may be installed to resolve dependencies unless the
--no-new-installs command-line option is supplied.
If no < package>s are listed on the command line, aptitude
will attempt to upgrade every package that can be upgraded. Otherwise,
aptitude will attempt to upgrade only the packages which it is
instructed to upgrade. The < package>s can be extended with
suffixes in the same manner as arguments to aptitude install, so you
can also give additional instructions to aptitude here; for instance,
aptitude safe-upgrade bash dash- will attempt to upgrade the bash
package and remove the dash package.
It is sometimes necessary to remove one package in order to upgrade another;
this command is not able to upgrade packages in such situations. Use the
full-upgrade command to upgrade as many packages as possible.
full-upgrade
Upgrades installed packages to their most
recent version, removing or installing packages as necessary. This command is
less conservative than safe-upgrade and thus more likely to perform
unwanted actions. However, it is capable of upgrading packages that
safe-upgrade cannot upgrade.
If no < package>s are listed on the command line, aptitude
will attempt to upgrade every package that can be upgraded. Otherwise,
aptitude will attempt to upgrade only the packages which it is
instructed to upgrade. The < package>s can be extended with
suffixes in the same manner as arguments to aptitude install, so you
can also give additional instructions to aptitude here; for instance,
aptitude full-upgrade bash dash- will attempt to upgrade the bash
package and remove the dash package.
Note
This command was originally named dist-upgrade for historical reasons,
and aptitude still recognizes dist-upgrade as a synonym for
full-upgrade.
keep-all
Cancels all scheduled actions on all packages;
any packages whose sticky state indicates an installation, removal, or upgrade
will have this sticky state cleared.
forget-new
Vergisst die Liste der “neuen”
Pakete (äquivalent zur Taste “f” im visuellen Modus).
search
Searches for packages matching one of the
patterns supplied on the command line. All packages which match any of the
given patterns will be displayed; for instance, “ aptitude search
'~N' edit” will list all “new” packages and all packages
whose name contains “edit”. For more information on search
patterns, see the section “Search Patterns” in the aptitude
reference manual.
Note
In the example above, “ aptitude search '~N' edit” has two
arguments after search and thus is searching for two patterns:
“ ~N” and “ edit”. As described in the
search pattern reference, a single pattern composed of two sub-patterns
separated by a space (such as “ ~N edit”) matches only if
both patterns match. Thus, the command “ aptitude search '~N
edit'” will only show “new” packages whose name contains
“edit”.
Unless you pass the -F option, the output of aptitude search will
look something like this:
Each search result is listed on a separate line. The first character of each
line indicates the current state of the package: the most common states are
p, meaning that no trace of the package exists on the system, c,
meaning that the package was deleted but its configuration files remain on the
system, i, meaning that the package is installed, and v, meaning
that the package is virtual. The second character indicates the stored action
(if any; otherwise a blank space is displayed) to be performed on the package,
with the most common actions being i, meaning that the package will be
installed, d, meaning that the package will be deleted, and p,
meaning that the package and its configuration files will be removed. If the
third character is A, the package was automatically installed.
For a complete list of the possible state and action flags, see the section
“Accessing Package Information” in the aptitude reference
guide. To customize the output of search, see the command-line options
-F and --sort.
show
i apt - Advanced front-end for dpkg pi apt-build - frontend to apt to build, optimize and in cp apt-file - APT package searching utility -- command- ihA raptor-utils - Raptor RDF Parser utilities
Displays detailed information about one or
more packages, listed following the search command. If a package name contains
a tilde character (“ ~”) or a question mark
(“?”), it will be treated as a search pattern and all
matching packages will be displayed (see the section “Search
Patterns” in the aptitude reference manual).
If the verbosity level is 1 or greater (i.e., at least one -v is present
on the command-line), information about all versions of the package is
displayed. Otherwise, information about the “candidate version”
(the version that “ aptitude install” would download) is
displayed.
You can display information about a different version of the package by
appending =<version> to the package name; you can
display the version from a particular archive or release by appending
/<archive> or /<release>
to the package name: for instance, /unstable or /sid. If either
of these is present, then only the version you request will be displayed,
regardless of the verbosity level.
If the verbosity level is 1 or greater, the package's architecture, compressed
size, filename, and md5sum fields will be displayed. If the verbosity level is
2 or greater, the select version or versions will be displayed once for each
archive in which they are found.
versions
Displays the versions of the packages listed
on the command-line.
Each version is listed on a separate line. The leftmost three characters
indicate the current state, planned state (if any), and whether the package
was automatically installed; for more information on their meanings, see the
documentation of aptitude search. To the right of the version number
you can find the releases from which the version is available, and the pin
priority of the version.
If a package name contains a tilde character (“ ~”) or a
question mark (“ ?”), it will be treated as a search
pattern and all matching versions will be displayed (see the section
“Search Patterns” in the aptitude reference manual). This
means that, for instance, aptitude versions '~i' will display all the
versions that are currently installed on the system and nothing else, not even
other versions of the same packages.
If the input is a search pattern, or if more than one package's versions are to
be displayed, aptitude will automatically group the output by package,
as shown above. You can disable this via --group-by=none, in
which case aptitude will display a single list of all the versions that
were found and automatically include the package name in each output line:
To disable the package name, pass --show-package-names=never:
In addition to the above options, the information printed for each version can
be controlled by the command-line option -F. The order in which
versions are displayed can be controlled by the command-line option
--sort. To prevent aptitude from formatting the output into
columns, use --disable-columns.
add-user-tag, remove-user-tag
$ aptitude versions wesnoth p 1:1.4.5-1 100 p 1:1.6.5-1 unstable 500 p 1:1.7.14-1 experimental 1
$ aptitude versions '~nexim4-daemon-light' Package exim4-daemon-light: i 4.71-3 100 p 4.71-4 unstable 500 Package exim4-daemon-light-dbg: p 4.71-4 unstable 500
$ aptitude versions --group-by=none '~nexim4-daemon-light' i exim4-daemon-light 4.71-3 100 p exim4-daemon-light 4.71-4 unstable 500 p exim4-daemon-light-dbg 4.71-4 unstable 500
$ aptitude versions --show-package-names=never --group-by=none '~nexim4-daemon-light' i 4.71-3 100 p 4.71-4 unstable 500 p 4.71-4 unstable 500
Adds a user tag to or removes a user tag from
the selected group of packages. If a package name contains a tilde (“
~”) or question mark (“?”), it is treated as a
search pattern and the tag is added to or removed from all the packages that
match the pattern (see the section “Search Patterns” in the
aptitude reference manual).
User tags are arbitrary strings associated with a package. They can be used with
the ?user-tag(<tag>) search term, which will
select all the packages that have a user tag matching <
tag>.
why, why-not
Explains the reason that a particular package
should or cannot be installed on the system.
This command searches for packages that require or conflict with the given
package. It displays a sequence of dependencies leading to the target package,
along with a note indicating the installed state of each package in the
dependency chain:
The command why finds a dependency chain that installs the package named
on the command line, as above. Note that the dependency that aptitude
produced in this case is only a suggestion. This is because no package
currently installed on this computer depends on or recommends the kdepim
package; if a stronger dependency were available, aptitude would have
displayed it.
In contrast, why-not finds a dependency chain leading to a conflict with
the target package:
If one or more < pattern>s are present, then aptitude will
begin its search at these patterns; that is, the first package in the chain it
prints will be a package matching the pattern in question. The patterns are
considered to be package names unless they contain a tilde character (“
~”) or a question mark (“?”), in which case
they are treated as search patterns (see the section “Search
Patterns” in the aptitude reference manual).
If no patterns are present, then aptitude will search for dependency
chains beginning at manually installed packages. This effectively shows the
packages that have caused or would cause a given package to be installed.
Note
aptitude why does not perform full dependency resolution; it only
displays direct relationships between packages. For instance, if A requires B,
C requires D, and B and C conflict, “ aptitude why-not D”
will not produce the answer “A depends on B, B conflicts with C, and D
depends on C”.
By default aptitude outputs only the “most installed, strongest,
tightest, shortest” dependency chain. That is, it looks for a chain that
only contains packages which are installed or will be installed; it looks for
the strongest possible dependencies under that restriction; it looks for
chains that avoid ORed dependencies and Provides; and it looks for the
shortest dependency chain meeting those criteria. These rules are
progressively weakened until a match is found.
If the verbosity level is 1 or more, then all the explanations
aptitude can find will be displayed, in inverse order of relevance. If
the verbosity level is 2 or more, a truly excessive amount of debugging
information will be printed to standard output.
This command returns 0 if successful, 1 if no explanation could be constructed,
and -1 if an error occurred.
clean
$ aptitude why kdepim i nautilus-data Recommends nautilus i A nautilus Recommends desktop-base (>= 0.2) i A desktop-base Suggests gnome | kde | xfce4 | wmaker p kde Depends kdepim (>= 4:3.4.3)
$ aptitude why-not textopo i ocaml-core Depends ocamlweb i A ocamlweb Depends tetex-extra | texlive-latex-extra i A texlive-latex-extra Conflicts textopo
Alle heruntergeladenen und
zwischengespeicherten .deb-Dateien aus dem Paketcache löschen. Der
Paketcache liegt normalerweise unter /var/cache/apt/archives.
autoclean
Löscht alle zwischengespeicherten
Paketdateien, die nicht mehr heruntergeladen werden können. Dies
verhindert das grenzenlose Wachstum des Cacheverzeichnisses, ohne es
vollständig zu leeren.
changelog
Downloads and displays the Debian changelog
for each of the given source or binary packages.
By default, the changelog for the version which would be installed with “
aptitude install” is downloaded. You can select a particular
version of a package by appending =<version> to the
package name; you can select the version from a particular archive or release
by appending /<archive> or
/<release> to the package name (for instance,
/unstable or /sid).
download
Downloads the .deb file for the given
package to the current directory. If a package name contains a tilde character
(“ ~”) or a question mark (“?”), it will
be treated as a search pattern and all the matching packages will be
downloaded (see the section “Search Patterns” in the
aptitude reference manual).
By default, the version which would be installed with “ aptitude
install” is downloaded. You can select a particular version of a
package by appending =<version> to the package
name; you can select the version from a particular archive or release by
appending /<archive> or
/<release> to the package name (for instance:
/unstable or /sid).
extract-cache-subset
Copy the apt configuration directory (
/etc/apt) and a subset of the package database to the specified
directory. If no packages are listed, the entire package database is copied;
otherwise only the entries corresponding to the named packages are copied.
Each package name may be a search pattern, and all the packages matching that
pattern will be selected (see the section “Search Patterns” in the
aptitude reference manual). Any existing package database files in the
output directory will be overwritten.
Dependencies in binary package stanzas will be rewritten to remove references to
packages not in the selected set.
help
Zeigt eine kurze Zusammenfassung der
verfübaren Befehle und Optionen an.
OPTIONEN¶
Die folgenden Optionen können angegeben werden, um das Verhalten der obigen Befehle zu verändern. Nicht jeder Befehl wird jede Option beachten; manche Optionen ergeben für einige Befehle keinen Sinn. --add-user-tag <tag>For full-upgrade, safe-upgrade,
forbid-version, hold, install, keep-all,
markauto, unmarkauto, purge, reinstall,
remove, unhold, and unmarkauto: add the user tag <
tag> to all packages that are installed, removed, or upgraded by
this command as if with the add-user-tag command.
--add-user-tag-to
<tag>,<pattern>
For full-upgrade, safe-upgrade
forbid-version, hold, install, keep-all,
markauto, unmarkauto, purge, reinstall,
remove, unhold, and unmarkauto: add the user tag <
tag> to all packages that match < pattern> as if with
the add-user-tag command. The pattern is a search pattern as described
in the section “Search Patterns” in the aptitude reference
manual.
For instance, aptitude safe-upgrade --add-user-tag-to
"new-installs,?action(install)" will add the tag
new-installs to all the packages installed by the safe-upgrade
command.
--allow-new-upgrades
When the safe resolver is being used (i.e.,
--safe-resolver was passed, the action is safe-upgrade, or
Aptitude::Always-Use-Safe-Resolver is set to true), allow the
dependency resolver to install upgrades for packages regardless of the value
of Aptitude::Safe-Resolver::No-New-Upgrades.
--allow-new-installs
Allow the safe-upgrade command to
install new packages; when the safe resolver is being used (i.e.,
--safe-resolver was passed, the action is safe-upgrade, or
Aptitude::Always-Use-Safe-Resolver is set to true), allow the
dependency resolver to install new packages. This option takes effect
regardless of the value of
Aptitude::Safe-Resolver::No-New-Installs.
--allow-untrusted
Install packages from untrusted sources
without prompting. You should only use this if you know what you are doing, as
it could easily compromise your system's security.
--disable-columns
This option causes aptitude search and
aptitude versions to output their results without any special
formatting. In particular: normally aptitude will add whitespace or
truncate search results in an attempt to fit its results into vertical
“columns”. With this flag, each line will be formed by replacing
any format escapes in the format string with the corresponding text; column
widths will be ignored.
For instance, the first few lines of output from “ aptitude search -F
'%p %V' --disable-columns libedataserver” might be:
As in the above example, --disable-columns is often useful in combination
with a custom display format set using the command-line option -F.
This corresponds to the configuration option
Aptitude::CmdLine::Disable-Columns.
-D, --show-deps
disksearch 1.2.1-3 hp-search-mac 0.1.3 libbsearch-ruby 1.5-5 libbsearch-ruby1.8 1.5-5 libclass-dbi-abstractsearch-perl 0.07-2 libdbix-fulltextsearch-perl 0.73-10
For commands that will install or remove
packages ( install, full-upgrade, etc), show brief explanations
of automatic installations and removals.
Dies entspricht der Einstellung Aptitude::CmdLine::Show-Deps.
-d, --download-only
Download packages to the package cache as
necessary, but do not install or remove anything. By default, the package
cache is stored in /var/cache/apt/archives.
Dies entspricht der Einstellung Aptitude::CmdLine::Download-Only.
-F <format>, --display-format <format>
Specify the format which should be used to
display output from the search and versions commands. For
instance, passing “ %p %V %v” for < format>
will display a package's name, followed by its currently installed version and
its available version (see the section “Customizing how packages are
displayed” in the aptitude reference manual for more
information).
The command-line option --disable-columns is often useful in combination
with -F.
For search, this corresponds to the configuration option
Aptitude::CmdLine::Package-Display-Format; for versions, this
corresponds to the configuration option
Aptitude::CmdLine::Version-Display-Format.
-f
Try hard to fix the dependencies of broken
packages, even if it means ignoring the actions requested on the command line.
Dies entspricht der Einstellung Aptitude::CmdLine::Fix-Broken.
--full-resolver
When package dependency problems are
encountered, use the default “full” resolver to solve them. Unlike
the “safe” resolver activated by --safe-resolver, the full
resolver will happily remove packages to fulfill dependencies. It can resolve
more situations than the safe algorithm, but its solutions are more likely to
be undesirable.
This option can be used to force the use of the full resolver even when
Aptitude::Always-Use-Safe-Resolver is true. The safe-upgrade
command never uses the full resolver and does not accept the
--full-resolver option.
--group-by <grouping-mode>
Control how the versions command groups
its output. The following values are recognized:
This corresponds to the configuration option
Aptitude::CmdLine::Versions-Group-By.
-h, --help
•
archive to group packages by the archive they occur in (“
stable”, “ unstable”, etc). If a package
occurs in several archives, it will be displayed in each of them.
•
auto to group versions by their package unless there is exactly one
argument and it is not a search pattern.
•
none to display all the versions in a single list without any
grouping.
•
package to group versions by their package.
•
source-package to group versions by their source package.
•
source-version to group versions by their source package and source
version.
Display a brief help message. Identical to the
help action.
--log-file=<file>
If < file> is a nonempty string,
log messages will be written to it, except that if < file> is
“ -”, the messages will be written to standard output
instead. If this option appears multiple times, the last occurrence is the one
that will take effect.
This does not affect the log of installations that aptitude has performed
(/var/log/aptitude); the log messages written using this configuration include
internal program events, errors, and debugging messages. See the command-line
option --log-level to get more control over what gets logged.
This corresponds to the configuration option
Aptitude::Logging::File.
--log-level=<level>,
--log-level=<category>:<level>
Set some standard log levels related to the
resolver, to produce logging output suitable for processing with automated
tools. This is equivalent to the command-line options
--log-level=aptitude.resolver.search:trace
--log-level=aptitude.resolver.search.tiers:info.
--no-new-installs
Prevent safe-upgrade from installing
any new packages; when the safe resolver is being used (i.e.,
--safe-resolver was passed or Aptitude::Always-Use-Safe-Resolver
is set to true), forbid the dependency resolver from installing new
packages. This option takes effect regardless of the value of
Aptitude::Safe-Resolver::No-New-Installs.
This mimics the historical behavior of apt-get upgrade.
--no-new-upgrades
When the safe resolver is being used (i.e.,
--safe-resolver was passed or Aptitude::Always-Use-Safe-Resolver
is set to true), forbid the dependency resolver from installing
upgrades for packages regardless of the value of
Aptitude::Safe-Resolver::No-New-Upgrades.
--no-show-resolver-actions
Do not display the actions performed by the
“safe” resolver, overriding any configuration option or earlier
--show-resolver-actions.
-O <reihenfolge>, --sort <reihenfolge>
Specify the order in which output from the
search and versions commands should be displayed. For instance,
passing “ installsize” for < order> will list
packages in order according to their size when installed (see the section
“Customizing how packages are sorted” in the aptitude
reference manual for more information).
The default sort order is name,version.
-o <schl>=<wert>
Eine Einstellung direkt setzen; zum Beispiel
können Sie -o Aptitude::Log=/tmp/my-log verwenden, um
aptitudes Handeln nach /tmp/my-log zu loggen. Weitere Informationen zu
den Einstellungen in den Konfigurationsdateien finden Sie in
“Configuration file reference” in der
aptitude-Benutzeranleitung.
-P, --prompt
Always display a prompt before downloading,
installing or removing packages, even when no actions other than those
explicitly requested will be performed.
Dies entspricht der Einstellung Aptitude::CmdLine::Always-Prompt.
--purge-unused
If Aptitude::Delete-Unused is set to
“ true” (its default), then in addition to removing each
package that is no longer required by any installed package, aptitude
will also purge them, removing their configuration files and perhaps other
important data. For more information about which packages are considered to be
“unused”, see the section “Managing Automatically Installed
Packages” in the aptitude reference manual. THIS OPTION CAN
CAUSE DATA LOSS! DO NOT USE IT UNLESS YOU KNOW WHAT YOU ARE DOING!
This corresponds to the configuration option
Aptitude::Purge-Unused.
-q[=<n>], --quiet[=<n>]
Suppress all incremental progress indicators,
thus making the output loggable. This may be supplied multiple times to make
the program quieter, but unlike apt-get, aptitude does not
enable -y when -q is supplied more than once.
The optional =<n> may be used to directly set the
amount of quietness (for instance, to override a setting in
/etc/apt/apt.conf); it causes the program to behave as if -q had been
passed exactly < n> times.
-R, --without-recommends
Do not treat recommendations as
dependencies when installing new packages (this overrides settings in
/etc/apt/apt.conf and ~/.aptitude/config). Packages previously installed due
to recommendations will not be removed.
This corresponds to the pair of configuration options
Apt::Install-Recommends and
Apt::AutoRemove::InstallRecommends.
-r, --with-recommends
Empfehlungen als Abhängigkeiten
behandeln, wenn neue Pakete installiert werden (dies überschreibt
Einstellungen in /etc/apt/apt.conf und ~/.aptitude/config).
This corresponds to the configuration option
Apt::Install-Recommends
--remove-user-tag <tag>
For full-upgrade, safe-upgrade
forbid-version, hold, install, keep-all,
markauto, unmarkauto, purge, reinstall,
remove, unhold, and unmarkauto: remove the user tag <
tag> from all packages that are installed, removed, or upgraded by
this command as if with the add-user-tag command.
--remove-user-tag-from
<tag>,<pattern>
For full-upgrade, safe-upgrade
forbid-version, hold, install, keep-all,
markauto, unmarkauto, purge, reinstall,
remove, unhold, and unmarkauto: remove the user tag <
tag> from all packages that match < pattern> as if with
the remove-user-tag command. The pattern is a search pattern as
described in the section “Search Patterns” in the aptitude
reference manual.
For instance, aptitude safe-upgrade --remove-user-tag-from
"not-upgraded,?action(upgrade)" will remove the
not-upgraded tag from all packages that the safe-upgrade command
is able to upgrade.
-s, --simulate
In command-line mode, print the actions that
would normally be performed, but don't actually perform them. This does not
require root privileges. In the visual interface, always open the cache in
read-only mode regardless of whether you are root.
This corresponds to the configuration option Aptitude::Simulate.
--safe-resolver
When package dependency problems are
encountered, use a “safe” algorithm to solve them. This resolver
attempts to preserve as many of your choices as possible; it will never remove
a package or install a version of a package other than the package's default
candidate version. It is the same algorithm used in safe-upgrade;
indeed, aptitude --safe-resolver full-upgrade is equivalent to
aptitude safe-upgrade. Because safe-upgrade always uses the safe
resolver, it does not accept the --safe-resolver flag.
This option is equivalent to setting the configuration variable
Aptitude::Always-Use-Safe-Resolver to true.
--schedule-only
For commands that modify package states,
schedule operations to be performed in the future, but don't perform them. You
can execute scheduled actions by running aptitude install with no
arguments. This is equivalent to making the corresponding selections in visual
mode, then exiting the program normally.
For instance, aptitude --schedule-only install evolution will schedule
the evolution package for later installation.
--show-package-names <when>
Controls when the versions command
shows package names. The following settings are allowed:
This option corresponds to the configuration item
Aptitude::CmdLine::Versions-Show-Package-Names.
--show-resolver-actions
•
always: display package names every time that aptitude versions
runs.
•
auto: display package names when aptitude versions runs if the
output is not grouped by package, and either there is a pattern-matching
argument or there is more than one argument.
•
never: never display package names in the output of aptitude
versions.
Display the actions performed by the
“safe” resolver and by safe-upgrade.
When executing the command safe-upgrade or when the option
--safe-resolver is present, aptitude will display a summary of the
actions performed by the resolver before printing the installation preview.
This is equivalent to the configuration option
Aptitude::Safe-Resolver::Show-Resolver-Actions.
--show-summary[=<MODE>]
Changes the behavior of “ aptitude
why” to summarize each dependency chain that it outputs, rather than
displaying it in long form. If this option is present and < MODE>
is not “ no-summary”, chains that contain Suggests
dependencies will not be displayed: combine --show-summary with
-v to see a summary of all the reasons for the target package to be
installed.
< MODE> can be any one of the following:
This option corresponds to the configuration item
Aptitude::CmdLine::Show-Summary; if --show-summary is present on
the command-line, it will override Aptitude::CmdLine::Show-Summary.
Example 10. Usage of --show-summary
--show-summary used with -v to display all the reasons a package
is installed:
--show-summary used to list a chain on one line:
-t <release>, --target-release <release>
1.
no-summary: don't show a summary (the default behavior if
--show-summary is not present).
2.
first-package: display the first package in each chain. This is the
default value of < MODE> if it is not present.
3.
first-package-and-type: display the first package in each chain, along
with the strength of the weakest dependency in the chain.
4.
all-packages: briefly display each chain of dependencies leading to the
target package.
5.
all-packages-with-dep-versions: briefly display each chain of
dependencies leading to the target package, including the target version of
each dependency.
$ aptitude -v --show-summary why foomatic-db Packages requiring foomatic-db: cupsys-driver-gutenprint foomatic-db-engine foomatic-db-gutenprint foomatic-db-hpijs foomatic-filters-ppds foomatic-gui kde printconf wine $ aptitude -v --show-summary=first-package-and-type why foomatic-db Packages requiring foomatic-db: [Depends] cupsys-driver-gutenprint [Depends] foomatic-db-engine [Depends] foomatic-db-gutenprint [Depends] foomatic-db-hpijs [Depends] foomatic-filters-ppds [Depends] foomatic-gui [Depends] kde [Depends] printconf [Depends] wine $ aptitude -v --show-summary=all-packages why foomatic-db Packages requiring foomatic-db: cupsys-driver-gutenprint D: cups-driver-gutenprint D: cups R: foomatic-filters R: foomatic-db-engine D: foomatic-db foomatic-filters-ppds D: foomatic-filters R: foomatic-db-engine D: foomatic-db kde D: kdeadmin R: system-config-printer-kde D: system-config-printer R: hal-cups-utils D: cups R: foomatic-filters R: foomatic-db-engine D: foomatic-db wine D: libwine-print D: cups-bsd R: cups R: foomatic-filters R: foomatic-db-engine D: foomatic-db foomatic-db-engine D: foomatic-db foomatic-db-gutenprint D: foomatic-db foomatic-db-hpijs D: foomatic-db foomatic-gui D: python-foomatic D: foomatic-db-engine D: foomatic-db printconf D: foomatic-db $ aptitude -v --show-summary=all-packages-with-dep-versions why foomatic-db Packages requiring foomatic-db: cupsys-driver-gutenprint D: cups-driver-gutenprint (>= 5.0.2-4) D: cups (>= 1.3.0) R: foomatic-filters (>= 4.0) R: foomatic-db-engine (>= 4.0) D: foomatic-db (>= 20090301) foomatic-filters-ppds D: foomatic-filters R: foomatic-db-engine (>= 4.0) D: foomatic-db (>= 20090301) kde D: kdeadmin (>= 4:3.5.5) R: system-config-printer-kde (>= 4:4.2.2-1) D: system-config-printer (>= 1.0.0) R: hal-cups-utils D: cups R: foomatic-filters (>= 4.0) R: foomatic-db-engine (>= 4.0) D: foomatic-db (>= 20090301) wine D: libwine-print (= 1.1.15-1) D: cups-bsd R: cups R: foomatic-filters (>= 4.0) R: foomatic-db-engine (>= 4.0) D: foomatic-db (>= 20090301) foomatic-db-engine D: foomatic-db foomatic-db-gutenprint D: foomatic-db foomatic-db-hpijs D: foomatic-db foomatic-gui D: python-foomatic (>= 0.7.9.2) D: foomatic-db-engine D: foomatic-db (>= 20090301) printconf D: foomatic-db
$ aptitude --show-summary=all-packages why aptitude-gtk libglib2.0-data Packages requiring libglib2.0-data: aptitude-gtk D: libglib2.0-0 R: libglib2.0-data
Set the release from which packages should be
installed. For instance, “ aptitude -t experimental ...”
will install packages from the experimental distribution unless you specify
otherwise. For the command-line actions “changelog”,
“download”, and “show”, this is equivalent to
appending /<release> to each package named on the
command-line; for other commands, this will affect the default candidate
version of packages according to the rules described in
apt_preferences(5).
Dies entspricht der Einstellung APT::Default-Release.
-V, --show-versions
Anzeigen, welche Versionen installiert werden.
Dies entspricht der Einstellung Aptitude::CmdLine::Show-Versions.
-v, --verbose
Veranlasst einige Befehle (z.B. show),
mehr Informationen anzuzeigen. Diese Option kann mehrfach angegeben werden um
noch mehr Informationen anzuzeigen.
Dies entspricht der Einstellung Aptitude::CmdLine::Verbose.
--version
Display the version of aptitude and
some information about how it was compiled.
--visual-preview
When installing or removing packages from the
command line, instead of displaying the usual prompt, start up the visual
interface and display its preview screen.
-W, --show-why
In the preview displayed before packages are
installed or removed, show which manually installed package requires each
automatically installed package. For instance:
When combined with -v or a non-zero value for
Aptitude::CmdLine::Verbose, this displays the entire chain of
dependencies that lead each package to be installed. For instance:
This option will also describe why packages are being removed, as shown above.
In this example, libdb4.2-dev conflicts with libdb-dev, which is provided by
libdb-dev.
This argument corresponds to the configuration option
Aptitude::CmdLine::Show-Why and displays the same information that is
computed by aptitude why and aptitude why-not.
-w <breite>, --width <breite>
$ aptitude --show-why install mediawiki ... The following NEW packages will be installed: libapache2-mod-php5{a} (for mediawiki) mediawiki php5{a} (for mediawiki) php5-cli{a} (for mediawiki) php5-common{a} (for mediawiki) php5-mysql{a} (for mediawiki)
$ aptitude -v --show-why install libdb4.2-dev The following NEW packages will be installed: libdb4.2{a} (libdb4.2-dev D: libdb4.2) libdb4.2-dev The following packages will be REMOVED: libdb4.4-dev{a} (libdb4.2-dev C: libdb-dev P<- libdb-dev)
Die Anzeigebreite, die für die Ausgabe
des search-Befehls verwendet wird, einstellen. (Per Vorgabe wird die
Breite des Terminals verwendet.)
Dies entspricht der Einstellung
Aptitude::CmdLine::Package-Display-Width
-y, --assume-yes
When a yes/no prompt would be presented,
assume that the user entered “yes”. In particular, suppresses the
prompt that appears when installing, upgrading, or removing packages. Prompts
for “dangerous” actions, such as removing essential packages, will
still be displayed. This option overrides -P.
Dies entspricht der Einstellung Aptitude::CmdLine::Assume-Yes.
-Z
Anzeigen, wieviel Plattenspeicher durch die
Installation / das Upgrade / das Löschen der einzelnen Pakete belegt oder
freigegeben wird.
Dies entspricht der Einstellung
Aptitude::CmdLine::Show-Size-Changes.
Die folgenden Optionen sind Befehle für den visuellen Modus von
aptitude. Sie werden intern verwendet und Sie sollten sie nicht selbst
verwenden müssen.
--autoclean-on-startup
Deletes old downloaded files when the program
starts (equivalent to starting the program and immediately selecting Actions
→ Clean obsolete files). You cannot use this option and “
--autoclean-on-startup”, “ -i”, or “
-u” at the same time.
--clean-on-startup
Cleans the package cache when the program
starts (equivalent to starting the program and immediately selecting Actions
→ Clean package cache). You cannot use this option and “
--autoclean-on-startup”, “ -i”, or “
-u” at the same time.
-i
Displays a download preview when the program
starts (equivalent to starting the program and immediately pressing
“g”). You cannot use this option and “
--autoclean-on-startup”, “
--clean-on-startup”, or “ -u” at the same
time.
-S <dateiname>
Die erweiterten Statusinformationen aus <
dateiname> laden, nicht aus der Standarddatei.
-u
Begins updating the package lists as soon as
the program starts. You cannot use this option and “
--autoclean-on-startup”, “
--clean-on-startup”, or “ -i” at the same
time.
ENVIRONMENT¶
HOMEIf $HOME/.aptitude exists, aptitude
will store its configuration file in $HOME/.aptitude/config. Otherwise, it
will look up the current user's home directory using getpwuid(2) and
place its configuration file there.
PAGER
If this environment variable is set,
aptitude will use it to display changelogs when “ aptitude
changelog” is invoked. If not set, it defaults to more.
TMP
If TMPDIR is unset, aptitude
will store its temporary files in TMP if that variable is set.
Otherwise, it will store them in /tmp.
TMPDIR
FILES¶
/var/lib/aptitude/pkgstatesThe file in which stored package states and
some package flags are stored.
/etc/apt/apt.conf, /etc/apt/apt.conf.d/*, ~/.aptitude/config
The configuration files for aptitude.
~/.aptitude/config overrides /etc/apt/apt.conf. See apt.conf(5) for
documentation of the format and contents of these files.
SEE ALSO¶
AUTHOR¶
Daniel Burrows <dburrows@debian.org>Author.
COPYRIGHT¶
Copyright 2004-2011 Daniel Burrows. This manual page is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This manual page is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.11/07/2012 | aptitude 0.6.8.2 |