NAME¶
vde_l3 - Virtual Distributed Ethernet 'Layer 3' Switch.
SYNOPSIS¶
vde_l3 -v vde_plug:ipaddress/netmask [
-v...]
[-r target_network/netmask:gateway] [
-G
default_gw] [
-M mgmt_socket]
DESCRIPTION¶
A
vde_l3 connects to one or more vde_switches, performing ip forwarding
among its virtual interfaces. A new interface is created at startup for each
-v option given at command line. Static routes to target networks can
be defined using the
-r option.
vde_l3 -v /var/run/s1.ctl:192.168.0.1/24
connects to the vde sock at /var/run/s1.ctl with its virtual interface ve0,
having the address 192.168.0.1 and netmask 255.255.255.0.
vde_l3 \
-v /var/run/s1.ctl:192.168.0.1/24 \
-v /var/run/s2.ctl:10.0.0.254/255.255.0.0
connects to the two vde socks, with its virtual interfaces ve0 and ve1, having
addressess 192.168.1.0 and 10.0.0.254 respectively. Hosts in each network can
specify the
vde_l3 as their gateway to reach the other one.
OPTIONS¶
- -v vde_plug:ipaddress/netmask
- Creates a virtual network interfaces on the vde_l3
box, with address ipaddress and netmask netmask. Please note
that the netmask can be specified either in the 'classic' A.B.C.D mode, or
just by giving the number of leading bits (f.e., /17 for 255.255.128.0).
One can define as many interfaces as she wants.
- -r target_network/netmask:gateway
- Specify a static route through gateway to reach
hosts in target_network with netmask netmask. One can define
as many routes as she wants.
- -G default_gw
- Specify a default gateway, to be used whenever no static
route is defined for a target host.
- -M mgmt_socket
- the unix socket where the parameters (interfaces addresses,
routes, etc.) can be checked and changed runtime. unixterm(1) can
be used as a remote terminal for wirefilter.
NOTICE¶
Virtual Distributed Ethernet is not related in any way with www.vde.com
("Verband der Elektrotechnik, Elektronik und Informationstechnik"
i.e. the German "Association for Electrical, Electronic & Information
Technologies").
SEE ALSO¶
vde_switch(1),
vdeq(1),
unixterm(1),
vde_cryptcab(1),
wirefilter(1).
AUTHORS¶
VDE_L3 is a tool by Daniele Lacamera <root@danielinux.net>
VDE is a project by Renzo Davoli <renzo@cs.unibo.it>