NAME¶
uhd_cal_tx_iq_balance - Generate TX IQ Balance Calibration Table
DESCRIPTION¶
The Universal Software Radio Peripheral Hardware Drivers handle calibration
information. This application sets up Transmitter calibration for a
daughterboard installed on the USRP. Because it also uses the receive side of
the daughterboard, this application only handles transceiver daughterboards.
USRP Generate TX IQ Balance Calibration Table Allowed
options:¶
- --help
- help message
- --verbose
- enable some verbose
- --args arg
- device address args [default = ""]
- --tx_wave_freq arg (=507123)
- Transmit wave frequency in Hz
- --tx_wave_ampl arg (=0.69999999999999996)
- Transmit wave amplitude in counts
- --rx_offset arg (=934400)
- RX LO offset from the TX LO in Hz
- --freq_start arg
- Frequency start in Hz (do not specify for default)
- --freq_stop arg
- Frequency stop in Hz (do not specify for default)
- --freq_step arg (=7300000)
- Step size for LO sweep in Hz
- --nsamps arg (=10000)
- Samples per data capture
This application measures leakage between RX and TX on an XCVR daughterboard to
self-calibrate.
SEE ALSO¶
uhd_cal_rx_iq_balance(1) uhd_cal_tx_dc_offset(1)