table of contents
other versions
- wheezy 1.8.4-2
- wheezy-backports 1.11.7.3-3~bpo70+1
- jessie 1.11.7-3
- testing 1.15.0-3
- unstable 1.15.2-1
SSS_DEBUGLEVEL(8) | SSSD Manual pages | SSS_DEBUGLEVEL(8) |
NAME¶
sss_debuglevel - change debug level while SSSD is runningSYNOPSIS¶
sss_debuglevel
[ options] NEW_DEBUG_LEVEL
DESCRIPTION¶
OPTIONS¶
-c,--configSpecify a non-default config file. The default
is /etc/sssd/sssd.conf. For reference on the config file syntax and options,
consult the sssd.conf(5) manual page.
NEW_DEBUG_LEVEL
Bit mask that indicates which debug levels
will be visible. 0x0010 is the default value as well as the lowest allowed
value, 0xFFF0 is the most verbose mode. This setting overrides the settings
from config file.
Currently supported debug levels:
0x0010: Fatal failures. Anything that would prevent SSSD from starting up
or causes it to cease running.
0x0020: Critical failures. An error that doesn't kill the SSSD, but one
that indicates that at least one major feature is not going to work properly.
0x0040: Serious failures. An error announcing that a particular request
or operation has failed.
0x0080: Minor failures. These are the errors that would percolate down to
cause the operation failure of 2.
0x0100: Configuration settings.
0x0200: Function data.
0x0400: Trace messages for operation functions.
0x1000: Trace messages for internal control functions.
0x2000: Contents of function-internal variables that may be interesting.
0x4000: Extremely low-level tracing information.
To log required debug levels, simply add their numbers together as shown in
following examples:
Example: To log fatal failures, critical failures, serious failures and
function data use 0x0270.
Example: To log fatal failures, configuration settings, function data,
trace messages for internal control functions use 0x1310.
Note: This is new format of debug levels introduced in 1.7.0. Older
format (numbers from 0-10) is compatible but deprecated.
AUTHORS¶
The SSSD upstream - http://fedorahosted.org/sssd03/04/2013 | SSSD |