NAME¶
srec_emon52 - Elektor Monitor (EMON52) file format
DESCRIPTION¶
This format is used by the monitor EMON52, developed by the European electronics
magazine Elektor (Elektuur in Holland). Elektor wouldn't be Elektor if they
didn't try to reinvent the wheel. It's a mystery why they didn't use an
existing format for the project. Only the Elektor Assembler will produce this
file format, reducing the choice of development tools dramatically.
Records¶
All data lines are called records, and each record contains the following four
fields:
The field are defined as follows:
- cc
- The byte count. A two digit hex value (1 byte), counting
the actual data bytes in the record. The byte count is separated from the
next field by a space.
- aaaa
- The address field. A four hex digit (2 byte) number
representing the first address to be used by this record.
- :
- The address field and the data field are separated by a
colon.
- dd
- The actual data of this record. There can be 1 to 255 data
bytes per record (see cc) All bytes in the record are separated from each
other (and the checksum) by a space.
- ssss
- Data Checksum, adding all bytes of the data line together,
forming a 16 bit checksum. Covers only all the data bytes of this
record.
Please note that there is no End Of File record defined.
Byte Count¶
The byte count cc counts the actual data bytes in the current record. Usually
records have 16 data bytes. I don't know what the maximum number of data bytes
is. It depends on the size of the data buffer in the EMON52.
Address Field¶
This is the address where the first data byte of the record should be stored.
After storing that data byte, the address is incremented by 1 to point to the
address for the next data byte of the record. And so on, until all data bytes
are stored.
The address is represented by a 4 digit hex number (2 bytes), with the MSD
first.
Data Field¶
The payload of the record is formed by the Data field. The number of data bytes
expected is given by the Byte Count field.
Checksum¶
The checksum is a 16 bit result from adding all data bytes of the record
together.
Size Multiplier¶
In general, binary data will expand in sized by approximately 3.8 times when
represented with this format.
EXAMPLE¶
Here is an example of an EMON52 file:
10 0000:57 6F 77 21 20 44 69 64 20 79 6F 75 20 72 65 61 0564
10 0010:6C 6C 79 20 67 6F 20 74 68 72 6F 75 67 68 20 61 05E9
10 0020:6C 6C 20 74 68 69 73 20 74 72 6F 75 62 6C 65 20 05ED
10 0030:74 6F 20 72 65 61 64 20 74 68 69 73 20 73 74 72 05F0
04 0040:69 6E 67 21 015F
SEE ALSO¶
http://sbprojects.fol.nl/knowledge/fileformats/emon52.htm
AUTHOR¶
This man page was taken from the above Web page. It was written by San Bergmans
<sanmail@bigfoot.com>