table of contents
SHOREWALL6-EXCLUSIO(5) | [FIXME: manual] | SHOREWALL6-EXCLUSIO(5) |
NAME¶
exclusion - Exclude a set of hosts from a definition in a shorewall6 configuration file.SYNOPSIS¶
!address-or-range[,address-or-range]...
!zone-name[,zone-name]...
DESCRIPTION¶
Exclusion is used when you wish to exclude one or more addresses from a definition. An exclaimation point is followed by a comma-separated list of addresses. The addresses may be single host addresses (e.g., fe80::2a0:ccff:fedb:31c4) or they may be network addresses in CIDR format (e.g., fe80::2a0:ccff:fedb:31c4/64). If your kernel and ip6tables include iprange support, you may also specify ranges of ip addresses of the form lowaddress- highaddress No embedded whitespace is allowed. Exclusion can appear after a list of addresses and/or address ranges. In that case, the final list of address is formed by taking the first list and then removing the addresses defined in the exclusion. Beginning in Shorewall 4.4.13, the second form of exclusion is allowed after all and any in the SOURCE and DEST columns of /etc/shorewall/rules. It allows you to omit arbitrary zones from the list generated by those key words.#ZONE TYPE z1 ip z2:z1 ip ...
#SOURCE DEST POLICY z1 net CONTINUE z2 net REJECT
#ACTION SOURCE DEST PROTO DEST # PORT(S) ACCEPT all!z2 net tcp 22
FILES¶
/etc/shorewall6/hosts /etc/shorewall6/masq /etc/shorewall6/rules /etc/shorewall6/tcrulesSEE ALSO¶
shorewall6(8), shorewall6-accounting(5), shorewall6-actions(5), shorewall6-blacklist(5), shorewall6-hosts(5), shorewall6-interfaces(5), shorewall6-maclist(5), shoewall6-netmap(5),shorewall6-params(5), shorewall6-policy(5), shorewall6-providers(5), shorewall6-rtrules(5), shorewall6-routestopped(5), shorewall6-rules(5), shorewall6.conf(5), shorewall6-secmarks(5), shorewall6-tcclasses(5), shorewall6-tcdevices(5), shorewall6-tcrules(5), shorewall6-tos(5), shorewall6-tunnels(5), shorewall-zones(5)06/28/2012 | [FIXME: source] |