table of contents
other versions
- wheezy 20120510dfsg0-1
foo2zjs(1) | General Commands Manual | foo2zjs(1) |
rr_n {.nr rr_n 0 1 foo2zjs - Convert Ghostscript pbmraw
or bitcmyk format into a ZJS printer stream foo2zjs [options]
<pbmraw-file >zjs-file
foo2zjs [options] <bitcmyk-file >zjs-file
foo2zjs [options] <pksmraw-file >zjs-file
foo2zjs converts Ghostscript pbmraw, bitcmyk, or pksmraw output formats
to monochrome or color ZJS streams, for driving the Minolta/QMS 2300 DL
network color laser printer and other Zenographics-based printers.
These are the options used to select the parameters of a print job that are
usually controlled on a per job basis.
Create a color ZJS stream:
/usr/bin/foo2zjs foo2zjs-wrapper(1), zjsdecode(1) Rick
Richardson <rick.richardson@comcast.net>
http://foo2zjs.rkkda.com/
- -c
- Force color mode if autodetect doesn't work.
- -d duplex
- Duplex code to send to printer [1].
1 off 2 long edge 3 short edge
- -g xpixxypix
- Set page dimensions in pixels [10200x6600].
- -m media
- Media code to send to printer [1].
Media 2300DL 2200DL HP 1018 HP P1102 HP HP 1005 HP 1020 HP P1606 CP1025 -z0 -z0 -z1 -z2 -z3 standard 1 1 1 1 1 transparency 2 2 2 2 2 envelope 257 na 267 267 267 letterhead 259 na 513 513 513 bond na na 260 260 260 thick 261 4 261 na na postcard 262 na na na na rough na na 263 263 263 heavy na na 262 262 262 labels 263 3 263 265 265 vellum na na 273 273 273 medium na na na 282 282 extraheavy na na na 283 283 color na na 512 512 512 light na na 258 258 258 preprinted na na 514 514 514 prepunched na na 515 515 515 recycled na na 516 516 516
- -p paper
- Paper code to send to printer [1].
Paper MC 2300DL HP 1018 HP P1102 HP HP 1005 HP 1020 HP P1606 CP1025 -z0 -z1 -z2 -z3 letter 1 1 1 1 legal 5 5 5 5 executive 7 7 7 7 A4 9 9 9 9 A5 11 11 11 11 B5jis 13 13 13 13 env #10 20 20 20 20 env DL 27 27 27 27 env CL 28 28 28 28 env B5 34 34 34 34 env Monarch 37 37 37 37 postcard (japan) na 260 43 43 B5iso na 259 na na A6 na 262 70 70 double postcard rotated na 261 82 82 16k 197x273 na 257 257 257 fanfold german legal na 258 258 258 16k 184x260 na na 263 263 16k 195x270 na na 264 264 photo 4x6 na na na 268 photo 5x8 na na na 269 photo 10x15 na na na 270
- -n copies
- Number of copies [1].
- -r xresxyres
- Set device resolution in pixels/inch [1200x600].
- -s source
- Source (InputSlot) code to send to printer [7].
1 upper 4 manual 2 lower 7 auto
- -t
- Draft mode. Every other pixel is white.
- -T density
- Print density (1-5). The default is 3 (medium).
- -J filename
- Filename string to send to printer.
- -U username
- Username string to send to printer. These are the options used to customize the operation of foo2zjs for a particular printer.
- -u xoffxyoff
- Set the offset of the start of the printable region from the upper left corner, in pixels [0x0].
- -l xoffxyoff
- Set the offset of the end of the printable region from the lower right corner, in pixels [0x0].
- -L mask
- Send logical clipping amounts implied by -u/-l in the
ZjStream [3].
0 don't send any logical clipping amounts 1 only send Y clipping amount 2 only send X clipping amount 3 send both X and Y clipping amounts
- -P
- Do not send START_PLANE codes on monochrome output. May be needed by some black and white only printers, such as the HP LaserJet 1000.
- -A
- AllIsBlack: convert C=1,M=1,Y=1 to just K=1. Works with bitcmyk input only.
- -B
- BlackClears: K=1 forces C,M,Y to 0. Works with bitcmyk input only.
- -X padlen
- Add extra zero padding to the end of BID segments. The default is 16 bytes. Padding 16 bytes of zeroes is needed for older ZjStream printers, such as the Minolta 2200DL and HP LaserJet 1000, and seems harmless to newer ones, such as the Minolta 2300DL. So the default should be good for all cases.
- -z model
- Model. Default is 0.
0 KM 2300DL / HP 1000 / HP 1005 1 HP 1018 / HP 1020 / HP 1022 2 HP Pro P1102 / P1566 / P1606dn 3 HP Pro CP1025
- -S plane
- Output just a single color plane from a color print and
print it on the black plane. The default is to output all color planes.
1 Cyan 2 Magenta 3 Yellow 4 Black
- -D level
- Set Debug level [0].
gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE -sPAPERSIZE=letter -r1200x600 -sDEVICE=pbmraw -sOutputFile=- - < testpage.ps | foo2zjs -r1200x600 -g10200x6600 -p1 >testpage.zm
gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE -sPAPERSIZE=letter -g10200x6600 -r1200x600 -sDEVICE=bitcmyk -sOutputFile=- - < testpage.ps | foo2zjs -r1200x600 -g10200x6600 -p1 >testpage.zc
Wed May 23 16:07:49 2012 | foo2zjs 0.0 |