table of contents
other versions
- wheezy 20120510dfsg0-1
foo2slx(1) | General Commands Manual | foo2slx(1) |
rr_n {.nr rr_n 0 1 foo2slx - Convert Ghostscript pbmraw
or bitcmyk format into a SLX printer stream foo2slx [options]
<pbmraw-file >slx-file
foo2slx [options] <bitcmyk-file >slx-file
foo2slx [options] <pksmraw-file >slx-file
foo2slx converts Ghostscript pbmraw, bitcmyk, or pksmraw output formats
to monochrome or color SLX streams, for driving the Lexmark C500 network color
laser printer and other SLZ-based printers. The SLX stream is a variant of
ZjStream produced by Software Imaging K.K.
These are the options used to select the parameters of a print job that are
usually controlled on a per job basis.
Create a color SLX stream:
/usr/bin/foo2slx foo2slx-wrapper(1), slxdecode(1) Rick
Richardson <rick.richardson@comcast.net>
http://foo2slx.rkkda.com/
- -c
- Force color mode if autodetect doesn't work.
- -g xpixxypix
- Set page dimensions in pixels [10200x6600].
- -m media
- Media code to send to printer [0].
Media SLX plain 0 transparency 1 labels 2 thick1 3 envelope1 4 thin 5 thick2 6 envelope2 7 middle 8 special 9
- -p paper
- Paper code to send to printer [6].
6 letter 2 A4 9 legal 4 B5 8 executive 5 B5iso 10 env #10 11 env DL
- -n copies
- Number of copies [1].
- -r xresxyres
- Set device resolution in pixels/inch [1200x600].
- -s source
- Source (InputSlot) code to send to printer [0].
0 auto 1 cassette1
- -u xoffxyoff
- Set the offset of the start of the printable region from the upper left corner, in pixels [0x0].
- -l xoffxyoff
- Set the offset of the end of the printable region from the lower right corner, in pixels [0x0].
- -L mask
- Send logical clipping amounts implied by -u/-l in the
ZjStream [3].
0 don't send any logical clipping amounts 1 only send Y clipping amount 2 only send X clipping amount 3 send both X and Y clipping amounts
- -A
- AllIsBlack: convert C=1,M=1,Y=1 to just K=1. Works with bitcmyk input only.
- -B
- BlackClears: K=1 forces C,M,Y to 0. Works with bitcmyk input only.
- These options are used for debugging foo2slx.
- -S plane
- Output just a single color plane from a color print and
print it on the black plane. The default is to output all color planes.
1 Cyan 2 Magenta 3 Yellow 4 Black
- -D level
- Set Debug level [0].
gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE -sPAPERSIZE=letter -r1200x600 -sDEVICE=pbmraw -sOutputFile=- - < testpage.ps | foo2slx -r1200x600 -g10200x6600 -p1 >testpage.zm
gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE -sPAPERSIZE=letter -g10200x6600 -r1200x600 -sDEVICE=bitcmyk -sOutputFile=- - < testpage.ps | foo2slx -r1200x600 -g10200x6600 -p1 >testpage.zc
Wed May 23 16:07:49 2012 | foo2slx 0.0 |