table of contents
other versions
- wheezy 20120510dfsg0-1
foo2oak(1) | General Commands Manual | foo2oak(1) |
rr_n {.nr rr_n 0 1 foo2oak - Convert Ghostscript
pbmraw, pgmraw or bitcmyk format into an OAKT printer stream foo2oak
[options] <pbmraw-file >OAKT-file
foo2oak [options] <pgmraw-file >OAKT-file
foo2oak [options] <bitcmyk-file >OAKT-file
foo2oak converts Ghostscript pbmraw or bitcmyk output formats to
monochrome or color OAKT streams, for driving the HP Color LaserJet 1500 laser
printer, Kyocera KM-1636/KM-2035 copiers, and other OAKT-based printers.
These are the options used to select the parameters of a print job that are
usually controlled on a per job basis.
Create a color OAKT stream:
/usr/bin/foo2oak foo2oak-wrapper(1), oakdecode(1) Rick
Richardson <rick.richardson@comcast.net>
http://foo2oak.rkkda.com/
- -c
- Force color mode if autodetect doesn't work.
- -d duplex
- Duplex code to send to printer [1].
1 off 2 long edge 3 short edge
- -g xpixxypix
- Set page dimensions in pixels [10200x6600].
- -m media
- Media code to send to printer [1].
Media Code autoselect 0 plain 1 preprinted 2 letterhead 3 transparency 4 prepunched 5 labels 6 bond 7 recycled 8 color 9 cardstock 10 envelope 11 light 13 tough 14 vellum 15 rough 16 thick 19 highqual 20
- -p paper
- Paper code to send to printer [1].
1 letter 3 ledger 5 legal 6 statement 7 executive 8 A3 9 A4 11 A5 12 B4 13 B5jis 14 folio 19 env9 20 env10 27 envDL 28 envC5 30 envC4 37 envMonarch 257 A6 258 B6 259 B5iso 260 env6
- -n copies
- Number of copies [1].
- -r xresxyres
- Set device resolution in pixels/inch [600x600].
- -s source
- Source (InputSlot) code to send to printer [7].
1 tray1 2 tray2 4 manual 7 auto
- -J filename
- Filename string to send to printer.
- -U username
- Username string to send to printer. These are the options used to customize the operation of foo2oak for a particular printer.
- -u xoffxyoff
- Set the offset of the start of the printable region from the upper left corner, in pixels [0x0].
- -l xoffxyoff
- Set the offset of the end of the printable region from the lower right corner, in pixels [0x0].
- -L mask
- Send logical clipping amounts implied by -u/-l in the OAKT
stream [3].
0 don't send any logical clipping amounts 1 only send Y clipping amount 2 only send X clipping amount 3 send both X and Y clipping amounts
- -A
- AllIsBlack: convert C=1,M=1,Y=1 to just K=1. Works with bitcmyk input only.
- -B
- BlackClears: K=1 forces C,M,Y to 0. Works with bitcmyk input only.
- -M mirror
- Mirror bytes. Mirror is 0 for Kyocera KM-1635/KM-2035 and 1 for the HP Color LaserJet 1500. The default is 1.
- -z model
- Model is 0 for the HP Color LaserJet 1500, and 1 for the Kyocera KM-1635/KM-2035 copiers. The default is 0. These options are used for debugging foo2oak.
- -S plane
- Output just a single color plane from a color print and
print it on the black plane. The default is to output all color planes.
1 Cyan 2 Magenta 3 Yellow 4 Black
- -D level
- Set Debug level [0].
gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE -sPAPERSIZE=letter -r600x600 -sDEVICE=pbmraw -sOutputFile=- - < testpage.ps | foo2oak -r600x600 -g5100x6600 -p1 >testpage.oak
gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE -sPAPERSIZE=letter -g5100x6600 -r600x600 -sDEVICE=bitcmyk -sOutputFile=- - < testpage.ps | foo2oak -r600x600 -g5100x6600 -p1 >testpage.oak
Wed May 23 16:07:49 2012 | foo2oak 0.0 |