POWERMAN-PDU(8) | NUT Manual | POWERMAN-PDU(8) |
NAME¶
powerman-pdu - Driver for Powerman PDUSYNOPSIS¶
powerman-pdu -hSUPPORTED HARDWARE¶
This driver supports a wide range of PDUs through the Powerman project.EXTRA ARGUMENTS¶
This driver doesn’t support any optional settings.INSTALLATION¶
This driver is not built by default. You can build it by using "configure --with-powerman=yes".UPS COMMANDS¶
The following instant commands (see upscmd(8)) are available for each outlet of the PDU, with X standing for the outlet number: outlet.X.load.onPower on the outlet.
outlet.X.load.off
Power off the outlet.
outlet.X.load.cycle
Cycle the outlet (power off then power on,
possibly with a delay).
IMPLEMENTATION¶
The hostname of the Powerman server is specified using the "port" value in ups.conf, i.e.:[pdu] driver = powerman-pdu port = host.example.com:port
KNOWN ISSUES¶
In the current NUT version (2.4.1), ups.status is still exposed, with the value "WAIT". Some other values from the ups collection are also exposed.AUTHOR¶
Arnaud Quette <arnaud.quette@gmail.com>SEE ALSO¶
The core driver:¶
nutupsdrv(8)Internet resources:¶
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/05/21/2012 | Network UPS Tools |