NAME¶
mrtg-mibhelp - A Table of some interesting OIDs
OVERVIEW¶
This File Contains a collection of interesting MIB Entries ... mrtg knows about
their names ... depending on the ASN.1 Syntax you may have to put
gauge
into the
Options[]: parameter.
For information about how to create a
Target[]: parameter which
references these MIB entries, please consult mrtg-reference.
MIB LIST¶
ifOperStatus¶
Descriptor: ifOperStatus
Identifier: 1.3.6.1.2.1.2.2.1.8
ASN.1 Syntax: INTEGER
Enumeration: up 1, down 2, testing 3
The current operational state of the interface. The
testing(3) state
indicates that no operational packets can be passed.
ifAdminStatus¶
Descriptor: ifAdminStatus
Identifier: 1.3.6.1.2.1.2.2.1.7
ASN.1 Syntax: INTEGER
Enumeration: up 1, down 2, testing 3
The current administrative state of the interface. The
testing(3) state
indicates that no operational packets can be passed.
ifInOctets¶
Descriptor: ifInOctets
Identifier: 1.3.6.1.2.1.2.2.1.10
ASN.1 Syntax: Counter32
The total number of octets received on the interface, including framing
characters.
ifInUcastPkts¶
Descriptor: ifInUcastPkts
Identifier: 1.3.6.1.2.1.2.2.1.11
ASN.1 Syntax: Counter32
The number of subnetwork-unicast packets delivered to a higher-layer protocol.
ifInNUcastPkts¶
Descriptor: ifInNUcastPkts
Identifier: 1.3.6.1.2.1.2.2.1.12
ASN.1 Syntax: Counter32
The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast)
packets delivered to a higher-layer protocol.
ifInDiscards¶
Descriptor: ifInDiscards
Identifier: 1.3.6.1.2.1.2.2.1.13
ASN.1 Syntax: Counter32
The number of inbound packets which were chosen to be discarded even though no
errors had been detected to prevent their being deliverable to a higher-layer
protocol. One possible reason for discarding such a packet could be to free up
buffer space.
ifInErrors¶
Descriptor: ifInErrors
Identifier: 1.3.6.1.2.1.2.2.1.14
ASN.1 Syntax: Counter32
The number of inbound packets that contained errors preventing them from being
deliverable to a higher-layer protocol.
ifInUnknownProtos¶
Descriptor: ifInUnknownProtos
Identifier: 1.3.6.1.2.1.2.2.1.15
ASN.1 Syntax: Counter32
The number of packets received via the interface which were discarded because of
an unknown or unsupported protocol.
ifOutOctets¶
Descriptor: ifOutOctets
Identifier: 1.3.6.1.2.1.2.2.1.16
ASN.1 Syntax: Counter32
The total number of octets transmitted out of the interface, including framing
characters.
ifOutUcastPkts¶
Descriptor: ifOutUcastPkts
Identifier: 1.3.6.1.2.1.2.2.1.17
ASN.1 Syntax: Counter32
The total number of packets that higher-level protocols requested be transmitted
to a subnetwork-unicast address, including those that were discarded or not
sent.
ifOutNUcastPkts¶
Descriptor: ifOutNUcastPkts
Identifier: 1.3.6.1.2.1.2.2.1.18
ASN.1 Syntax: Counter32
The total number of packets that higher-level protocols requested be transmitted
to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast)
address, including those that were discarded or not sent.
ifOutDiscards¶
Descriptor: ifOutDiscards
Identifier: 1.3.6.1.2.1.2.2.1.19
ASN.1 Syntax: Counter32
The number of outbound packets which were chosen to be discarded even though no
errors had been detected to prevent their being transmitted. One possible
reason for discarding such a packet could be to free up buffer space.
ifOutErrors¶
Descriptor: ifOutErrors
Identifier: 1.3.6.1.2.1.2.2.1.20
ASN.1 Syntax: Counter32
The number of outbound packets that could not be transmitted because of errors.
ifOutQLen¶
Descriptor: ifOutQLen
Identifier: 1.3.6.1.2.1.2.2.1.21
ASN.1 Syntax: Unsigned32
The length of the output packet queue (in packets).
frInOctets¶
From: Simon Ferrett <simonf@world.net>
'frInOctets' => '1.3.6.1.2.1.10.32.2.1.9'
'frOutOctets' => '1.3.6.1.2.1.10.32.2.1.7'
which when used in the form:
frInOctets.pp.dd&frOutOctets.pp.dd:community@cisco.router
where pp is the physical port that the frame relay pvc is defined on and dd is
the DLCI of the pvc gets you the in and out octets for just that pvc.
ifAdminHack and ifOperHack¶
The return values of ifAdminStatus and ifOperStatus are not very useful for
graphing. Use ifOperHack and ifAdminHack instead. They return 1 for UP and 0
otherwise.
Note these are not real MIB entities but mrtg hacks
PseudoZero and PseudoOne¶
will return 0 and 1 respectively
Note these are not real MIB entities but mrtg hacks
AUTHOR¶
Tobias Oetiker <tobi@oetiker.ch>