table of contents
- NAME
- SYNOPSIS
- DESCRIPTION
- INTERACTIVE CONTROL
- USAGE
- CONFIGURATION FILES
- PROFILES
- GENERAL OPTIONS
- PLAYER OPTIONS
- DEMUXER/STREAM OPTIONS
- OSD/SUBTITLE OPTIONS
- AUDIO OUTPUT OPTIONS
- AUDIO OUTPUT DRIVERS
- VIDEO OUTPUT OPTIONS
- VIDEO OUTPUT DRIVERS
- DECODING/FILTERING OPTIONS
- AUDIO FILTERS
- VIDEO FILTERS
- ENVIRONMENT VARIABLES
- FILES
- EXAMPLES OF MPLAYER USAGE
- AUTHORS
other versions
MPlayer(1) | The Movie Player | MPlayer(1) |
NAME¶
mplayer - movie playerSYNOPSIS¶
mplayer [options] [file|URL|playlist|-]DESCRIPTION¶
mplayer is a movie player for Linux (runs on many other platforms and CPU architectures, see the documentation). It plays most MPEG/VOB, AVI, ASF/WMA/WMV, RM, QT/MOV/MP4, Ogg/OGM, MKV, VIVO, FLI, NuppelVideo, yuv4mpeg, FILM and RoQ files, supported by many native and binary codecs. You can watch VCD, SVCD, DVD, Blu-ray, 3ivx, DivX 3/4/5, WMV and even H.264 movies, too. MPlayer supports a wide range of video and audio output drivers. It works with X11, Xv, DGA, OpenGL, SVGAlib, fbdev, AAlib, libcaca, DirectFB, Quartz, Mac OS X CoreVideo, but you can also use GGI, SDL (and all their drivers), VESA (on every VESA-compatible card, even without X11), some low-level card-specific drivers (for Matrox, 3dfx and ATI) and some hardware MPEG decoder boards, such as the Siemens DVB, Hauppauge PVR (IVTV) and DXR3/Hollywood+. Most of them support software or hardware scaling, so you can enjoy movies in fullscreen mode. MPlayer has an onscreen display (OSD) for status information, nice big antialiased shaded subtitles and visual feedback for keyboard controls. European/ISO8859-1,2 (Hungarian, English, Czech, etc), Cyrillic and Korean fonts are supported along with 12 subtitle formats (MicroDVD, SubRip, OGM, SubViewer, Sami, VPlayer, RT, SSA, AQTitle, JACOsub, PJS and our own: MPsub) and DVD subtitles (SPU streams, VOBsub and Closed Captions). Usage examples to get you started quickly can be found at the end of this man page. Also see the HTML documentation!INTERACTIVE CONTROL¶
MPlayer has a fully configurable, command-driven control layer which allows you to control MPlayer using keyboard, mouse, joystick or remote control (with LIRC). See the -input option for ways to customize it.- keyboard control
- LEFT and RIGHT
- Seek backward/forward 10 seconds. Shift+arrow does a 1 second exact seek (see -hr-seek; currently modifier keys like shift only work if used in an X output window).
- UP and DOWN
- Seek forward/backward 1 minute. Shift+arrow does a 5 second exact seek (see -hr-seek; currently modifier keys like shift only work if used in an X output window).
- PGUP and PGDWN
- Seek forward/backward 10 minutes.
- [ and ]
- Decrease/increase current playback speed by 10%.
- { and }
- Halve/double current playback speed.
- BACKSPACE
- Reset playback speed to normal.
- < and >
- Go backward/forward in the playlist.
- ENTER
- Go forward in the playlist, even over the end.
- HOME and END
- next/previous playtree entry in the parent list
- INS and DEL (ASX playlist only)
- next/previous alternative source.
- p / SPACE
- Pause (pressing again unpauses).
- .
- Step forward. Pressing once will pause movie, every consecutive press will play one frame and then go into pause mode again.
- q / ESC
- Stop playing and quit.
- U
- Stop playing (and quit if -idle is not used).
- + and -
- Adjust audio delay by +/- 0.1 seconds.
- / and *
- Decrease/increase volume.
- 9 and 0
- Decrease/increase volume.
- ( and )
- Adjust audio balance in favor of left/right channel.
- m
- Mute sound.
- _ (MPEG-TS, AVI and libavformat only)
- Cycle through the available video tracks.
- # (DVD, Blu-ray, MPEG, Matroska, AVI and libavformat only)
- Cycle through the available audio tracks.
- TAB (MPEG-TS and libavformat only)
- Cycle through the available programs.
- f
- Toggle fullscreen (also see -fs).
- T
- Toggle stay-on-top (also see -ontop).
- w and e
- Decrease/increase pan-and-scan range.
- o
- Toggle OSD states: none / seek / seek + timer / seek + timer + total time.
- d
- Toggle frame dropping states: none / skip display / skip decoding (see -framedrop and -hardframedrop).
- v
- Toggle subtitle visibility.
- j and J
- Cycle through the available subtitles.
- y and g
- Step forward/backward in the subtitle list.
- F
- Toggle displaying "forced subtitles".
- a
- Toggle subtitle alignment: top / middle / bottom.
- x and z
- Adjust subtitle delay by +/- 0.1 seconds.
- V
- Toggle subtitle VSFilter aspect compatibility mode. See -ass-vsfilter-aspect-compat for more info.
- C (-capture only)
- Start/stop capturing the primary stream.
- r and t
- Move subtitles up/down.
- i (-edlout mode only)
- Set start or end of an EDL skip and write it out to the given file.
- s (-vf screenshot only)
- Take a screenshot.
- S (-vf screenshot only)
- Start/stop taking screenshots.
- I
- Show filename on the OSD.
- P
- Show progression bar, elapsed time and total duration on the OSD.
- ! and @
- Seek to the beginning of the previous/next chapter.
- D (-vo vdpau, -vf yadif, -vf kerndeint only)
- Activate/deactivate deinterlacer.
- A
- Cycle through the available DVD angles.
- c (currently -vo vdpau and -vo xv only)
- Change YUV colorspace.
(The following keys are valid only when using
a video output that supports the corresponding adjustment, the software
equalizer (-vf eq or -vf eq2) or hue filter (-vf hue).)
- 1 and 2
- Adjust contrast.
- 3 and 4
- Adjust brightness.
- 5 and 6
- Adjust hue.
- 7 and 8
- Adjust saturation.
(The following keys are valid only when using
the quartz or corevideo video output driver.)
- command + 0
- Resize movie window to half its original size.
- command + 1
- Resize movie window to its original size.
- command + 2
- Resize movie window to double its original size.
- command + f
- Toggle fullscreen (also see -fs).
- command + [ and command + ]
- Set movie window alpha.
(The following keys are valid only when using
the sdl video output driver.)
- c
- Cycle through available fullscreen modes.
- n
- Restore original mode.
(The following keys are valid if you have a
keyboard with multimedia keys.)
- PAUSE
- Pause.
- STOP
- Stop playing and quit.
- PREVIOUS and NEXT
- Seek backward/forward 1 minute.
(The following keys are only valid if you
compiled with TV or DVB input support and will take precedence over the keys
defined above.)
- h and k
- Select previous/next channel.
- n
- Change norm.
- u
- Change channel list.
(The following keys are only valid if you
compiled with dvdnav support: They are used to navigate the menus.)
- keypad 8
- Select button up.
- keypad 2
- Select button down.
- keypad 4
- Select button left.
- keypad 6
- Select button right.
- keypad 5
- Return to main menu.
- keypad 7
- Return to nearest menu (the order of preference is: chapter->title->root).
- keypad ENTER
- Confirm choice.
(The following keys are used for controlling
TV teletext. The data may come from either an analog TV source or an MPEG
transport stream.)
- X
- Switch teletext on/off.
- Q and W
- Go to next/prev teletext page.
- mouse control
- button 3 and button 4
- Seek backward/forward 1 minute.
- button 5 and button 6
- Decrease/increase volume.
- joystick control
- left and right
- Seek backward/forward 10 seconds.
- up and down
- Seek forward/backward 1 minute.
- button 1
- Pause.
- button 2
- Toggle OSD states: none / seek / seek + timer / seek + timer + total time.
- button 3 and button 4
- Decrease/increase volume.
USAGE¶
Every 'flag' option has a 'noflag' counterpart, e.g. the opposite of the -fs option is -nofs. If an option is marked as (XXX only), it will only work in combination with the XXX option or if XXX is compiled in. NOTE: The suboption parser (used for example for -ao pcm suboptions) supports a special kind of string-escaping intended for use with external GUIs.CONFIGURATION FILES¶
You can put all of the options in configuration files which will be read every time MPlayer is run. The system-wide configuration file 'mplayer.conf' is in your configuration directory (e.g. /etc/mplayer or /usr/local/etc/mplayer), the user specific one is '~/.mplayer/config'. User specific options override system-wide options and options given on the command line override either. The syntax of the configuration files is 'option=<value>', everything after a '#' is considered a comment. Options that work without values can be enabled by setting them to 'yes' or '1' or 'true' and disabled by setting them to 'no' or '0' or 'false'. Even suboptions can be specified in this way. You can also write file-specific configuration files. If you wish to have a configuration file for a file called 'movie.avi', create a file named 'movie.avi.conf' with the file-specific options in it and put it in ~/.mplayer/. You can also put the configuration file in the same directory as the file to be played, as long as you give the -use-filedir-conf option (either on the command line or in your global config file). If a file-specific configuration file is found in the same directory, no file-specific configuration is loaded from ~/.mplayer. In addition, the -use-filedir-conf option enables directory-specific configuration files. For this, MPlayer first tries to load a mplayer.conf from the same directory as the file played and then tries to load any file-specific configuration. EXAMPLE MPLAYER CONFIGURATION FILE:# Use Matrox driver by default. vo=xmga # I love practicing handstands while watching videos. flip=yes # Decode multiple files from PNG, # start with mf://filemask mf=type=png:fps=25 # Eerie negative images are cool. vf=eq2=1.0:-0.8
PROFILES¶
To ease working with different configurations profiles can be defined in the configuration files. A profile starts with its name between square brackets, e.g. '[my-profile]'. All following options will be part of the profile. A description (shown by -profile help) can be defined with the profile-desc option. To end the profile, start another one or use the profile name 'default' to continue with normal options.EXAMPLE MPLAYER PROFILE:
[protocol.dvd] profile-desc="profile for dvd:// streams" vf=pp=hb/vb/dr/al/fd alang=en [protocol.dvdnav] profile-desc="profile for dvdnav:// streams" profile=protocol.dvd mouse-movements=yes nocache=yes [extension.flv] profile-desc="profile for .flv files" flip=yes [vo.pnm] outdir=/tmp [ao.alsa] device=spdif
GENERAL OPTIONS¶
- -codecpath <dir>
- Specify a directory for binary codecs.
- -codecs-file <filename> (also see -afm, -ac, -vfm, -vc)
- Override the standard search path and use the specified file instead of the builtin codecs.conf.
- -include <configuration file>
- Specify configuration file to be parsed after the default ones.
- -list-options
- Prints all available options.
- -msgcharset <charset>
- Convert console messages to the specified character set
(default: autodetect). Text will be in the encoding specified with the
--charset configure option. Set this to "noconv" to disable
conversion (for e.g. iconv problems).
- -msgcolor
- Enable colorful console output on terminals that support ANSI color.
- -msglevel <all=<level>:<module>=<level>:...>
- Control verbosity directly for each module. The 'all'
module changes the verbosity of all the modules not explicitly specified
on the command line. See '-msglevel help' for a list of all modules.
- -1
- complete silence
- 0
- fatal messages only
- 1
- error messages
- 2
- warning messages
- 3
- short hints
- 4
- informational messages
- 5
- status messages (default)
- 6
- verbose messages
- 7
- debug level 2
- 8
- debug level 3
- 9
- debug level 4
- -msgmodule
- Prepend module name in front of each console message.
- -noconfig <options>
- Do not parse selected configuration files.
- all
- all configuration files
- system
- system configuration file
- user
- user configuration file
- -quiet
- Make console output less verbose; in particular, prevents the status line (i.e. A: 0.7 V: 0.6 A-V: 0.068 ...) from being displayed. Particularly useful on slow terminals or broken ones which do not properly handle carriage return (i.e. \r).
- -priority <prio> (Windows and OS/2 only)
- Set process priority for MPlayer according to the predefined priorities available under Windows and OS/2. Possible values of <prio>:
idle|belownormal|normal|abovenormal|high|realtime
WARNING: Using realtime priority can
cause system lockup.
- -profile <profile1,profile2,...>
- Use the given profile(s), -profile help displays a list of the defined profiles.
- -really-quiet (also see -quiet)
- Display even less output and status messages than with -quiet.
- -show-profile <profile>
- Show the description and content of a profile.
- -use-filedir-conf
- Look for a file-specific configuration file in the same
directory as the file that is being played.
- -v
- Increment verbosity level, one level for each -v found on the command line.
PLAYER OPTIONS¶
- -autoq <quality> (use with -vf [s]pp)
- Dynamically changes the level of postprocessing depending on the available spare CPU time. The number you specify will be the maximum level used. Usually you can use some big number. You have to use -vf [s]pp without parameters in order for this to work.
- -autosync <factor>
- Gradually adjusts the A/V sync based on audio delay measurements. Specifying -autosync 0, the default, will cause frame timing to be based entirely on audio delay measurements. Specifying -autosync 1 will do the same, but will subtly change the A/V correction algorithm. An uneven video framerate in a movie which plays fine with -nosound can often be helped by setting this to an integer value greater than 1. The higher the value, the closer the timing will be to -nosound. Try -autosync 30 to smooth out problems with sound drivers which do not implement a perfect audio delay measurement. With this value, if large A/V sync offsets occur, they will only take about 1 or 2 seconds to settle out. This delay in reaction time to sudden A/V offsets should be the only side-effect of turning this option on, for all sound drivers.
- -benchmark
- Prints some statistics on CPU usage and dropped frames at
the end of playback. Use in combination with -nosound and -vo null for
benchmarking only the video codec.
- -chapter-merge-threshold <number>
- Threshold for merging almost consecutive ordered chapter parts in milliseconds (default: 100). Some Matroska files with ordered chapters have inaccurate chapter end timestamps, causing a small gap between the end of one chapter and the start of the next one when they should match. If the end of one playback part is less than the given threshold away from the start of the next one then keep playing video normally over the chapter change instead of doing a seek.
- -colorkey <number>
- Changes the colorkey to an RGB value of your choice. 0x000000 is black and 0xffffff is white. Only supported by the fbdev, svga, vesa, xmga, xover, xv (see -vo xv:ck) and directx video output drivers.
- -nocolorkey
- Disables colorkeying. Only supported by the fbdev, svga, vesa, xmga, xover, xv (see -vo xv:ck) and directx video output drivers.
- -correct-pts, -nocorrect-pts
- Switches MPlayer to a mode where timestamps for video frames are calculated differently and video filters which add new frames or modify timestamps of existing ones are supported. Now enabled automatically for most common file formats. The more accurate timestamps can be visible for example when playing subtitles timed to scene changes with the -ass option. Without -correct-pts the subtitle timing will typically be off by some frames. This option does not work correctly with some demuxers and codecs.
- -crash-debug (DEBUG CODE)
- Automatically attaches gdb upon crash or SIGTRAP. Support must be compiled in by configuring with --enable-crash-debug.
- -doubleclick-time
- Time in milliseconds to recognize two consecutive button presses as a double-click (default: 300). Set to 0 to let your windowing system decide what a double-click is (-vo directx only).
- -edlout <filename>
- Creates a new file and writes edit decision list (EDL) records to it. During playback, the user hits 'i' to mark the start or end of a skip block. This provides a starting point from which the user can fine-tune EDL entries later. See http://www.mplayerhq.hu/DOCS/HTML/en/edl.html for details.
- -fixed-vo, -nofixed-vo
- -fixed-vo enforces a fixed video system for multiple files (one (un)initialization for all files). Therefore only one window will be opened for all files. Now enabled by default, use -nofixed-vo to disable and create a new window whenever the video stream changes. Some of the older drivers may not be fixed-vo compliant.
- -framedrop (also see -hardframedrop, experimental without -nocorrect-pts)
- Skip displaying some frames to maintain A/V sync on slow systems. Video filters are not applied to such frames. For B-frames even decoding is skipped completely.
- -h, -help, --help
- Show short summary of options.
- -hardframedrop (experimental without -nocorrect-pts)
- More intense frame dropping (breaks decoding). Leads to image distortion! Note that especially the libmpeg2 decoder may crash with this, so consider using "-vc ffmpeg12,".
- -heartbeat-cmd
- Command that is executed every 30 seconds during playback
via system() - i.e. using the shell.
- -hr-seek off|absolute|always
- Select when to use precise seeks that are not limited to keyframes. Such seeks require decoding video from the previous keyframe up to the target position and so can take some time depending on decoding performance. For some video formats precise seeks are disabled. This option selects the default choice to use for seeks; it's possible to explicitly override that default in the definition of key bindings and in slave mode commands.
- off
- Never use precise seeks.
- absolute
- Use precise seeks if the seek is to an absolute position in the file, such as a chapter seek, but not for relative seeks like the default behavior of arrow keys (default).
- always
- Use precise seeks whenever possible.
- -identify
- Shorthand for -msglevel identify=4. Show file parameters in an easily parseable format. Also prints more detailed information about subtitle and audio track languages and IDs. In some cases you can get more information by using -msglevel identify=6. For example, for a DVD or Blu-ray it will list the chapters and time length of each title, as well as a disk ID. Combine this with -frames 0 to suppress all video output. The wrapper script TOOLS/midentify.sh suppresses the other MPlayer output and (hopefully) shellescapes the filenames.
- -idle (also see -slave)
- Makes MPlayer wait idly instead of quitting when there is no file to play. Mostly useful in slave mode where MPlayer can be controlled through input commands.
- -input <commands>
- This option can be used to configure certain parts of the
input system. Paths are relative to ~/.mplayer/.
- conf=<filename>
- Specify input configuration file other than the default ~/.mplayer/input.conf. ~/.mplayer/<filename> is assumed if no full path is given.
- ar-dev=<device>
- Device to be used for Apple IR Remote (default is autodetected, Linux only).
- ar-delay
- Delay in milliseconds before we start to autorepeat a key (0 to disable).
- ar-rate
- Number of key presses to generate per second on autorepeat.
- (no)default-bindings
- Use the key bindings that MPlayer ships with by default.
- keylist
- Prints all keys that can be bound to commands.
- cmdlist
- Prints all commands that can be bound to keys.
- js-dev
- Specifies the joystick device to use (default: /dev/input/js0).
- file=<filename>
- Read commands from the given file. Mostly useful with a
FIFO.
- -key-fifo-size <2-65000>
- Specify the size of the FIFO that buffers key events (default: 7). If it is too small some events may be lost. The main disadvantage of setting it to a very large value is that if you hold down a key triggering some particularly slow command then the player may be unresponsive while it processes all the queued commands.
- -lircconf <filename> (LIRC only)
- Specifies a configuration file for LIRC (default: ~/.lircrc).
- -list-properties
- Print a list of the available properties.
- -loop <number>
- Loops movie playback <number> times. 0 means forever.
- -menu (OSD menu only)
- Turn on OSD menu support.
- -menu-cfg <filename> (OSD menu only)
- Use an alternative menu.conf.
- -menu-chroot <path> (OSD menu only)
- Chroot the file selection menu to a specific location.
- -menu-chroot /home
- Will restrict the file selection menu to /home and downward (i.e. no access to / will be possible, but /home/user_name will).
- -menu-keepdir (OSD menu only)
- File browser starts from the last known location instead of current directory.
- -menu-root <value> (OSD menu only)
- Specify the main menu.
- -menu-startup (OSD menu only)
- Display the main menu at MPlayer startup.
- -mouse-movements
- Permit MPlayer to receive pointer events reported by the video output driver. Necessary to select the buttons in DVD menus. Supported for X11-based VOs (x11, xv, etc) and the gl, gl2, direct3d and corevideo VOs.
- -noar
- Turns off AppleIR remote support.
- -noconsolecontrols
- Prevent MPlayer from reading key events from standard input. Useful when reading data from standard input. This is automatically enabled when - is found on the command line. There are situations where you have to set it manually, e.g. if you open /dev/stdin (or the equivalent on your system), use stdin in a playlist or intend to read from stdin later on via the loadfile or loadlist slave commands.
- -noinitial-audio-sync
- When starting a video file or after events such as seeking MPlayer will by default modify the audio stream to make it start from the same timestamp as video, by either inserting silence at the start or cutting away the first samples. This option disables that functionality and makes the player behave like older MPlayer versions did: video and audio are both started immediately even if their start timestamps differ, and then video timing is gradually adjusted if necessary to reach correct synchronization later.
- -nojoystick
- Turns off joystick support.
- -nolirc
- Turns off LIRC support.
- -nomouseinput
- Disable mouse button press/release input (mozplayerxp's context menu relies on this option).
- -noordered-chapters
- Disable support for Matroska ordered chapters. MPlayer will not load or search for video segments from other files, and will also ignore any chapter order specified for the main file.
- -pts-association-mode auto|decode|sort
- Select the method used to determine which container packet timestamp corresponds to a particular output frame from the video decoder. Normally you shouldn't need to change this option.
- auto
- Try to pick a working mode from the ones below automatically (default)
- decoder
- Use decoder reordering functionality.
- sort
- Maintain a buffer of unused pts values and use the lowest value for the frame.
- -rtc (RTC only)
- Turns on usage of the Linux RTC (realtime clock - /dev/rtc) as timing mechanism. This wakes up the process every 1/1024 seconds to check the current time. Useless with modern Linux kernels configured for desktop use as they already wake up the process with similar accuracy when using normal timed sleep.
- -playing-msg <string>
- Print out a string before starting playback. The following expansions are supported:
- ${NAME}
- Expand to the value of the property NAME.
- ?(NAME:TEXT)
- Expand TEXT only if the property NAME is available.
- ?(!NAME:TEXT)
- Expand TEXT only if the property NAME is not available.
- -playlist <filename>
- Play files according to a playlist file (ASX, Winamp, SMIL,
or one-file-per-line format).
- -rtc-device <device>
- Use the specified device for RTC timing.
- -shuffle
- Play files in random order.
- -slave (also see -input)
- Switches on slave mode, in which MPlayer works as a backend
for other programs. Instead of intercepting keyboard events, MPlayer will
read commands separated by a newline (\n) from stdin.
- -softsleep
- Time frames by repeatedly checking the current time instead of asking the kernel to wake up MPlayer at the correct time. Useful if your kernel timing is imprecise and you cannot use the RTC either. Comes at the price of higher CPU consumption.
- -sstep <sec>
- Skip <sec> seconds after every frame. The normal framerate of the movie is kept, so playback is accelerated. Since MPlayer can only seek to the next keyframe this may be inexact.
DEMUXER/STREAM OPTIONS¶
- -a52drc <level>
- Select the Dynamic Range Compression level for AC-3 audio streams. <level> is a float value ranging from 0 to 1, where 0 means no compression and 1 (which is the default) means full compression (make loud passages more silent and vice versa). Values up to 2 are also accepted, but are purely experimental. This option only shows an effect if the AC-3 stream contains the required range compression information.
- -aid <ID> (also see -alang)
- Select audio channel (MPEG: 0-31, AVI/OGM: 1-99, ASF/RM: 0-127, VOB(AC-3): 128-159, VOB(LPCM): 160-191, MPEG-TS 17-8190). MPlayer prints the available audio IDs when run in verbose (-v) mode. When playing an MPEG-TS stream, MPlayer will use the first program (if present) with the chosen audio stream.
- -ausid <ID> (also see -alang)
- Select audio substream channel. Currently the valid range is 0x55..0x75 and applies only to MPEG-TS when handled by the native demuxer (not by libavformat). The format type may not be correctly identified because of how this information (or lack thereof) is embedded in the stream, but it will demux correctly the audio streams when multiple substreams are present. MPlayer prints the available substream IDs when run with -identify.
- -alang <language code[,language code,...]> (also see -aid)
- Specify a priority list of audio languages to use.
Different container formats employ different language codes. DVDs use ISO
639-1 two letter language codes, Matroska, MPEG-TS and NUT use ISO 639-2
three letter language codes while OGM uses a free-form identifier. MPlayer
prints the available languages when run in verbose (-v) mode.
- mplayer dvd://1 -alang hu,en
- Chooses the Hungarian language track on a DVD and falls back on English if Hungarian is not available.
- mplayer -alang jpn example.mkv
- Plays a Matroska file in Japanese.
- -audio-demuxer <[+]name> (-audiofile only)
- Force audio demuxer type for -audiofile. Use a '+' before the name to force it, this will skip some checks! Give the demuxer name as printed by -audio-demuxer help. -audio-demuxer audio forces MP3.
- -audiofile <filename>
- Play audio from an external file (WAV, MP3 or Ogg Vorbis) while viewing a movie.
- -audiofile-cache <kBytes>
- Enables caching for the stream used by -audiofile, using the specified amount of memory.
- -reuse-socket (udp:// only)
- Allows a socket to be reused by other processes as soon as it is closed.
- -bandwidth <Bytes> (network only)
- Specify the maximum bandwidth for network streaming (for servers that are able to send content in different bitrates). Useful if you want to watch live streamed media behind a slow connection. With Real RTSP streaming, it is also used to set the maximum delivery bandwidth allowing faster cache filling and stream dumping.
- -bluray-angle <angle ID> (Blu-ray only)
- Some Blu-ray discs contain scenes that can be viewed from multiple angles. Here you can tell MPlayer which angles to use (default: 1).
- -bluray-chapter <chapter ID> (Blu-ray only)
- Tells MPlayer which Blu-ray chapter to start the current title from (default: 1).
- -bluray-device <path to disc> (Blu-ray only)
- Specify the Blu-ray disc location. Must be a directory with Blu-ray structure.
- -cache <kBytes>
- This option specifies how much memory (in kBytes) to use when precaching a file or URL. Especially useful on slow media.
- -nocache
- Turns off caching.
- -cache-min <percentage>
- Playback will start when the cache has been filled up to <percentage> of the total.
- -cache-seek-min <percentage>
- If a seek is to be made to a position within <percentage> of the cache size from the current position, MPlayer will wait for the cache to be filled to this position rather than performing a stream seek (default: 50).
- -capture
- Allows capturing the primary stream (not additional audio tracks or other kind of streams) into the file specified by -dumpfile or by default. If this option is given, capturing can be started and stopped by pressing the key bound to this function (see section INTERACTIVE CONTROL). Same as for -dumpstream, this will likely not produce usable results for anything else than MPEG streams. Note that, due to cache latencies, captured data may begin and end somewhat delayed compared to what you see displayed.
- -cdda <option1:option2> (CDDA only)
- This option can be used to tune the CD Audio reading
feature of MPlayer.
- speed=<value>
- Set CD spin speed.
- paranoia=<0-2>
- Set paranoia level. Values other than 0 seem to break playback of anything but the first track.
0: disable checking (default)
1: overlap checking only
2: full data correction and verification
- generic-dev=<value>
- Use specified generic SCSI device.
- sector-size=<value>
- Set atomic read size.
- overlap=<value>
- Force minimum overlap search during verification to <value> sectors.
- toc-bias
- Assume that the beginning offset of track 1 as reported in the TOC will be addressed as LBA 0. Some Toshiba drives need this for getting track boundaries correct.
- toc-offset=<value>
- Add <value> sectors to the values reported when addressing tracks. May be negative.
- (no)skip
- (Never) accept imperfect data reconstruction.
- -cdrom-device <path to device>
- Specify the CD-ROM device (default: /dev/cdrom).
- -channels <number> (also see -af channels)
- Request the number of playback channels (default: 2).
MPlayer asks the decoder to decode the audio into as many channels as
specified. Then it is up to the decoder to fulfill the requirement. This
is usually only important when playing videos with AC-3 audio (like DVDs).
In that case liba52 does the decoding by default and correctly downmixes
the audio into the requested number of channels. To directly control the
number of output channels independently of how many channels are decoded,
use the channels filter.
- 2
- stereo
- 4
- surround
- 6
- full 5.1
- 8
- full 7.1
- -chapter <chapter ID>[-<endchapter ID>] (dvd:// and dvdnav:// only)
- Specify which chapter to start playing at. Optionally specify which chapter to end playing at (default: 1).
- -edition <edition ID> (Matroska only)
- Specify the edition (set of chapters) to use, where 0 is the first. If set to -1 (the default), MPlayer will choose the first edition declared as a default, or if there is no default, the first edition defined.
- -cookies (network only)
- Send cookies when making HTTP requests.
- -cookies-file <filename> (network only)
- Read HTTP cookies from <filename> (default: ~/.mozilla/ and ~/.netscape/) and skip reading from default locations. The file is assumed to be in Netscape format.
- -delay <sec>
- audio delay in seconds (positive or negative float value)
- -ignore-start
- Ignore the specified starting time for streams in AVI files. This nullifies stream delays.
- -demuxer <[+]name>
- Force demuxer type. Use a '+' before the name to force it, this will skip some checks! Give the demuxer name as printed by -demuxer help.
- -dumpaudio
- Dumps raw compressed audio stream to ./stream.dump (useful with MPEG/AC-3, in most other cases the resulting file will not be playable). If you give more than one of -dumpaudio, -dumpvideo, -dumpstream on the command line only the last one will work.
- -dumpfile <filename>
- Specify which file MPlayer should dump to. Should be used together with -dumpaudio / -dumpvideo / -dumpstream / -capture.
- -dumpstream
- Dumps the raw stream to ./stream.dump. Useful when ripping from DVD or network. If you give more than one of -dumpaudio, -dumpvideo, -dumpstream on the command line only the last one will work.
- -dumpvideo
- Dump raw compressed video stream to ./stream.dump (not very usable). If you give more than one of -dumpaudio, -dumpvideo, -dumpstream on the command line only the last one will work.
- -dvbin <options> (DVB only)
- Pass the following parameters to the DVB input module, in
order to override the default ones:
- card=<1-4>
- Specifies using card number 1-4 (default: 1).
- file=<filename>
- Instructs MPlayer to read the channels list from <filename>. Default is ~/.mplayer/channels.conf.{sat,ter,cbl,atsc} (based on your card type) or ~/.mplayer/channels.conf as a last resort.
- timeout=<1-30>
- Maximum number of seconds to wait when trying to tune a frequency before giving up (default: 30).
- -dvd-device <path to device> (DVD only)
- Specify the DVD device or .iso filename (default: /dev/dvd). You can also specify a directory that contains files previously copied directly from a DVD (with e.g. vobcopy).
- -dvd-speed <factor or speed in KB/s> (DVD only)
- Try to limit DVD speed (default: 0, no change). DVD base
speed is about 1350KB/s, so a 8x drive can read at speeds up to 10800KB/s.
Slower speeds make the drive more quiet, for watching DVDs 2700KB/s should
be quiet and fast enough. MPlayer resets the speed to the drive default
value on close. Values less than 100 mean multiples of 1350KB/s, i.e.
-dvd-speed 8 selects 10800KB/s.
- -dvdangle <angle ID> (DVD only)
- Some DVD discs contain scenes that can be viewed from multiple angles. Here you can tell MPlayer which angles to use (default: 1).
- -edl <filename>
- Enables edit decision list (EDL) actions during playback. Video will be skipped over and audio will be muted and unmuted according to the entries in the given file. See http://www.mplayerhq.hu/DOCS/HTML/en/edl.html for details on how to use this.
- -endpos <[[hh:]mm:]ss[.ms]> (also see -ss and -sb)
- Stop at given time.
- -endpos 56
- Stop at 56 seconds.
- -endpos 01:10:00
- Stop at 1 hour 10 minutes.
- -ss 10 -endpos 56
- Stop at 1 minute 6 seconds.
- -forceidx
- Force index rebuilding. Useful for files with broken index
(A/V desync, etc). This will enable seeking in files where seeking was not
possible.
- -fps <float value>
- Override video framerate. Useful if the original value is wrong or missing.
- -frames <number>
- Play/convert only first <number> frames, then quit.
- -hr-mp3-seek (MP3 only)
- Hi-res MP3 seeking. Enabled when playing from an external MP3 file, as we need to seek to the very exact position to keep A/V sync. Can be slow especially when seeking backwards since it has to rewind to the beginning to find an exact frame position.
- -http-header-fields <field1,field2>
- Set custom HTTP fields when accessing HTTP stream.
- mplayer -http-header-fields 'Field1: value1','Field2:
value2' http://localhost:1234
- -idx (also see -forceidx)
- Rebuilds index of files if no index was found, allowing
seeking. Useful with broken/incomplete downloads, or badly created files.
- -noidx
- Skip rebuilding index file.
- -ipv4-only-proxy (network only)
- Skip the proxy for IPv6 addresses. It will still be used for IPv4 connections.
- -lavfdopts <option1:option2:...>
- Specify parameters for libavformat demuxers (-demuxer
lavf). Separate multiple options with a colon.
Available suboptions are:
- analyzeduration=<value>
- Maximum length in seconds to analyze the stream properties.
- format=<value>
- Force a specific libavformat demuxer.
- o=<key>=<value>[,<key>=<value>[,...]]
- Pass AVOptions to libavformat demuxer. Note, a patch to
make the o= unneeded and pass all unknown options through the AVOption
system is welcome. A full list of AVOptions can be found in the FFmpeg
manual. Note that some options may conflict with MPlayer options.
EXAMPLE:
- o=fflags=+ignidx
- probesize=<value>
- Maximum amount of data to probe during the detection phase. In the case of MPEG-TS this value identifies the maximum number of TS packets to scan.
- cryptokey=<hexstring>
- Encryption key the demuxer should use. This is the raw binary data of the key converted to a hexadecimal string.
- -loadidx <index file>
- The file from which to read the video index data saved by
-saveidx. This index will be used for seeking, overriding any index data
contained in the AVI itself. MPlayer will not prevent you from loading an
index file generated from a different AVI, but this is sure to cause
unfavorable results.
- -mc <seconds/frame>
- maximum A-V sync correction per frame (in seconds)
- -mf <option1:option2:...>
- Used when decoding from multiple PNG or JPEG files.
- w=<value>
- input file width (default: autodetect)
- h=<value>
- input file height (default: autodetect)
- fps=<value>
- output fps (default: 25)
- type=<value>
- input file type (available: jpeg, png, tga, sgi)
- -ni (AVI only)
- Force usage of non-interleaved AVI parser (fixes playback of some bad AVI files).
- -nobps (AVI only)
- Do not use average byte/second value for A-V sync. Helps with some AVI files with broken header.
- -noextbased
- Disables extension-based demuxer selection. By default, when the file type (demuxer) cannot be detected reliably (the file has no header or it is not reliable enough), the filename extension is used to select the demuxer. Always falls back on content-based demuxer selection.
- -passwd <password> (also see -user) (network only)
- Specify password for HTTP authentication.
- -prefer-ipv4 (network only)
- Use IPv4 on network connections. Falls back on IPv6 automatically.
- -prefer-ipv6 (IPv6 network only)
- Use IPv6 on network connections. Falls back on IPv4 automatically.
- -psprobe <byte position>
- When playing an MPEG-PS or MPEG-PES streams, this option lets you specify how many bytes in the stream you want MPlayer to scan in order to identify the video codec used. This option is needed to play EVO or VDR files containing H.264 streams.
- -pvr <option1:option2:...> (PVR only)
- This option tunes various encoding properties of the PVR
capture module. It has to be used with any hardware MPEG encoder based
card supported by the V4L2 driver. The Hauppauge WinTV PVR-150/250/350/500
and all IVTV based cards are known as PVR capture cards. Be aware that
only Linux 2.6.18 kernel and above is able to handle MPEG stream through
V4L2 layer. For hardware capture of an MPEG stream and watching it with
MPlayer, use 'pvr://' as a movie URL.
- aspect=<0-3>
- Specify input aspect ratio:
0: 1:1
1: 4:3 (default)
2: 16:9
3: 2.21:1
- arate=<32000-48000>
- Specify encoding audio rate (default: 48000 Hz, available: 32000, 44100 and 48000 Hz).
- alayer=<1-3>
- Specify MPEG audio layer encoding (default: 2).
- abitrate=<32-448>
- Specify audio encoding bitrate in kbps (default: 384).
- amode=<value>
- Specify audio encoding mode. Available preset values are 'stereo', 'joint_stereo', 'dual' and 'mono' (default: stereo).
- vbitrate=<value>
- Specify average video bitrate encoding in Mbps (default: 6).
- vmode=<value>
- Specify video encoding mode:
vbr: Variable BitRate (default)
cbr: Constant BitRate
- vpeak=<value>
- Specify peak video bitrate encoding in Mbps (only useful for VBR encoding, default: 9.6).
- fmt=<value>
- Choose an MPEG format for encoding:
ps: MPEG-2 Program Stream (default)
ts: MPEG-2 Transport Stream
mpeg1: MPEG-1 System Stream
vcd: Video CD compatible stream
svcd: Super Video CD compatible stream
dvd: DVD compatible stream
- -radio <option1:option2:...> (radio only)
- These options set various parameters of the radio capture
module. For listening to radio with MPlayer use
'radio://<frequency>' (if channels option is not given) or
'radio://<channel_number>' (if channels option is given) as a movie
URL. You can see allowed frequency range by running MPlayer with '-v'. To
start the grabbing subsystem, use 'radio://<frequency or
channel>/capture'. If the capture keyword is not given you can listen
to radio using the line-in cable only. Using capture to listen is not
recommended due to synchronization problems, which makes this process
uncomfortable.
- device=<value>
- Radio device to use (default: /dev/radio0 for Linux and /dev/tuner0 for *BSD).
- driver=<value>
- Radio driver to use (default: v4l2 if available, otherwise v4l). Currently, v4l and v4l2 drivers are supported.
- volume=<0..100>
- sound volume for radio device (default 100)
- freq_min=<value> (*BSD BT848 only)
- minimum allowed frequency (default: 87.50)
- freq_max=<value> (*BSD BT848 only)
- maximum allowed frequency (default: 108.00)
- channels=<frequency>-<name>,<frequency>-<name>,...
- Set channel list. Use _ for spaces in names (or play with
quoting ;-). The channel names will then be written using OSD and the
slave commands radio_step_channel and radio_set_channel will be usable for
a remote control (see LIRC). If given, number in movie URL will be treated
as channel position in channel list.
- adevice=<value> (radio capture only)
- Name of device to capture sound from. Without such a name capture will be disabled, even if the capture keyword appears in the URL. For ALSA devices use it in the form hw=<card>.<device>. If the device name contains a '=', the module will use ALSA to capture, otherwise OSS.
- arate=<value> (radio capture only)
- Rate in samples per second (default: 44100).
- achannels=<value> (radio capture only)
- Number of audio channels to capture.
- -rawaudio <option1:option2:...>
- This option lets you play raw audio files. You have to use
-demuxer rawaudio as well. It may also be used to play audio CDs which are
not 44kHz 16-bit stereo. For playing raw AC-3 streams use -rawaudio
format=0x2000 -demuxer rawaudio.
- channels=<value>
- number of channels
- rate=<value>
- rate in samples per second
- samplesize=<value>
- sample size in bytes
- bitrate=<value>
- bitrate for rawaudio files
- format=<value>
- fourcc in hex
- -rawvideo <option1:option2:...>
- This option lets you play raw video files. You have to use
-demuxer rawvideo as well.
- fps=<value>
- rate in frames per second (default: 25.0)
- sqcif|qcif|cif|4cif|pal|ntsc
- set standard image size
- w=<value>
- image width in pixels
- h=<value>
- image height in pixels
- i420|yv12|yuy2|y8
- set colorspace
- format=<value>
- colorspace (fourcc) in hex or string constant. Use -rawvideo format=help for a list of possible strings.
- size=<value>
- frame size in Bytes
EXAMPLE:
- mplayer foreman.qcif -demuxer rawvideo -rawvideo qcif
- Play the famous "foreman" sample video.
- mplayer sample-720x576.yuv -demuxer rawvideo -rawvideo w=720:h=576
- Play a raw YUV sample.
- -referrer <string> (network only)
- Specify a referrer path or URL for HTTP requests.
- -rtsp-port
- Used with 'rtsp://' URLs to force the client's port number. This option may be useful if you are behind a router and want to forward the RTSP stream from the server to a specific client.
- -rtsp-destination
- Used with 'rtsp://' URLs to force the destination IP address to be bound. This option may be useful with some RTSP server which do not send RTP packets to the right interface. If the connection to the RTSP server fails, use -v to see which IP address MPlayer tries to bind to and try to force it to one assigned to your computer instead.
- -rtsp-stream-over-tcp (LIVE555 and NEMESI only)
- Used with 'rtsp://' URLs to specify that the resulting incoming RTP and RTCP packets be streamed over TCP (using the same TCP connection as RTSP). This option may be useful if you have a broken internet connection that does not pass incoming UDP packets (see http://www.live555.com/mplayer/).
- -rtsp-stream-over-http (LIVE555 only)
- Used with 'http://' URLs to specify that the resulting incoming RTP and RTCP packets be streamed over HTTP.
- -saveidx <filename>
- Force index rebuilding and dump the index to
<filename>. Currently this only works with AVI files.
- -sb <byte position> (also see -ss)
- Seek to byte position. Useful for playback from CD-ROM images or VOB files with junk at the beginning.
- -speed <0.01-100>
- Slow down or speed up playback by the factor given as parameter.
- -srate <Hz>
- Select the output sample rate to be used (of course sound cards have limits on this). If the sample frequency selected is different from that of the current media, the resample or lavcresample audio filter will be inserted into the audio filter layer to compensate for the difference. The type of resampling can be controlled by the -af-adv option. The default is fast resampling that may cause distortion.
- -ss <time> (also see -sb)
- Seek to given time position.
- -ss 56
- Seeks to 56 seconds.
- -ss 01:10:00
- Seeks to 1 hour 10 min.
- -tskeepbroken
- Tells MPlayer not to discard TS packets reported as broken in the stream. Sometimes needed to play corrupted MPEG-TS files.
- -tsprobe <byte position>
- When playing an MPEG-TS stream, this option lets you specify how many bytes in the stream you want MPlayer to search for the desired audio and video IDs.
- -tsprog <1-65534>
- When playing an MPEG-TS stream, you can specify with this option which program (if present) you want to play. Can be used with -vid and -aid.
- -tv <option1:option2:...> (TV/PVR only)
- This option tunes various properties of the TV capture
module. For watching TV with MPlayer, use 'tv://' or
'tv://<channel_number>' or even 'tv://<channel_name> (see
option channels for channel_name below) as a movie URL. You can also use
'tv:///<input_id>' to start watching a movie from a composite or
S-Video input (see option input for details).
- noaudio
- no sound
- automute=<0-255> (v4l and v4l2 only)
- If signal strength reported by device is less than this value, audio and video will be muted. In most cases automute=100 will be enough. Default is 0 (automute disabled).
- driver=<value>
- See -tv driver=help for a list of compiled-in TV input drivers. available: dummy, v4l, v4l2, bsdbt848 (default: autodetect)
- device=<value>
- Specify TV device (default: /dev/video0). NOTE: For the bsdbt848 driver you can provide both bktr and tuner device names separating them with a comma, tuner after bktr (e.g. -tv device=/dev/bktr1,/dev/tuner1).
- input=<value>
- Specify input (default: 0 (TV), see console output for available inputs).
- freq=<value>
- Specify the frequency to set the tuner to (e.g. 511.250). Not compatible with the channels parameter.
- outfmt=<value>
- Specify the output format of the tuner with a preset value supported by the V4L driver (yv12, rgb32, rgb24, rgb16, rgb15, uyvy, yuy2, i420) or an arbitrary format given as hex value. Try outfmt=help for a list of all available formats.
- width=<value>
- output window width
- height=<value>
- output window height
- fps=<value>
- framerate at which to capture video (frames per second)
- buffersize=<value>
- maximum size of the capture buffer in megabytes (default: dynamical)
- norm=<value>
- For bsdbt848 and v4l, PAL, SECAM, NTSC are available. For v4l2, see the console output for a list of all available norms, also see the normid option below.
- normid=<value> (v4l2 only)
- Sets the TV norm to the given numeric ID. The TV norm depends on the capture card. See the console output for a list of available TV norms.
- channel=<value>
- Set tuner to <value> channel.
- chanlist=<value>
- available: argentina, australia, china-bcast, europe-east, europe-west, france, ireland, italy, japan-bcast, japan-cable, newzealand, russia, southafrica, us-bcast, us-cable, us-cable-hrc
- channels=<chan>-<name>[=<norm>],<chan>-<name>[=<norm>],...
- Set names for channels. NOTE: If <chan> is an
integer greater than 1000, it will be treated as frequency (in kHz) rather
than channel name from frequency table.
- [brightness|contrast|hue|saturation]=<-100-100>
- Set the image equalizer on the card.
- audiorate=<value>
- Set input audio sample rate.
- forceaudio
- Capture audio even if there are no audio sources reported by v4l.
- alsa
- Capture from ALSA.
- amode=<0-3>
- Choose an audio mode:
0: mono
1: stereo
2: language 1
3: language 2
- forcechan=<1-2>
- By default, the count of recorded audio channels is determined automatically by querying the audio mode from the TV card. This option allows forcing stereo/mono recording regardless of the amode option and the values returned by v4l. This can be used for troubleshooting when the TV card is unable to report the current audio mode.
- adevice=<value>
- Set an audio device. <value> should be /dev/xxx for OSS and a hardware ID for ALSA. You must replace any ':' by a '.' in the hardware ID for ALSA.
- audioid=<value>
- Choose an audio output of the capture card, if it has more than one.
- [volume|bass|treble|balance]=<0-65535> (v4l1)
- [volume|bass|treble|balance]=<0-100> (v4l2)
- These options set parameters of the mixer on the video capture card. They will have no effect, if your card does not have one. For v4l2 50 maps to the default value of the control, as reported by the driver.
- gain=<0-100> (v4l2)
- Set gain control for video devices (usually webcams) to the desired value and switch off automatic control. A value of 0 enables automatic control. If this option is omitted, gain control will not be modified.
- immediatemode=<bool>
- A value of 0 means capture and buffer audio and video together. A value of 1 (default) means to do video capture only and let the audio go through a loopback cable from the TV card to the sound card.
- mjpeg
- Use hardware MJPEG compression (if the card supports it). When using this option, you do not need to specify the width and height of the output window, because MPlayer will determine it automatically from the decimation value (see below).
- decimation=<1|2|4>
- choose the size of the picture that will be compressed by hardware MJPEG compression:
1: full size
704x576 PAL
704x480 NTSC
2: medium size
352x288 PAL
352x240 NTSC
4: small size
176x144 PAL
176x120 NTSC
704x576 PAL
704x480 NTSC
352x288 PAL
352x240 NTSC
176x144 PAL
176x120 NTSC
- quality=<0-100>
- Choose the quality of the JPEG compression (< 60 recommended for full size).
- tdevice=<value>
- Specify TV teletext device (example: /dev/vbi0) (default: none).
- tformat=<format>
- Specify TV teletext display format (default: 0):
0: opaque
1: transparent
2: opaque with inverted colors
3: transparent with inverted colors
- tpage=<100-899>
- Specify initial TV teletext page number (default: 100).
- tlang=<-1-127>
- Specify default teletext language code (default: 0), which will be used as primary language until a type 28 packet is received. Useful when the teletext system uses a non-latin character set, but language codes are not transmitted via teletext type 28 packets for some reason. To see a list of supported language codes set this option to -1.
- hidden_video_renderer (dshow only)
- Terminate stream with video renderer instead of Null renderer (default: off). Will help if video freezes but audio does not. NOTE: May not work with -vo directx and -vf crop combination.
- hidden_vp_renderer (dshow only)
- Terminate VideoPort pin stream with video renderer instead of removing it from the graph (default: off). Useful if your card has a VideoPort pin and video is choppy. NOTE: May not work with -vo directx and -vf crop combination.
- system_clock (dshow only)
- Use the system clock as sync source instead of the default graph clock (usually the clock from one of the live sources in graph).
- normalize_audio_chunks (dshow only)
- Create audio chunks with a time length equal to video frame time length (default: off). Some audio cards create audio chunks about 0.5s in size, resulting in choppy video when using immediatemode=0.
- -tvscan <option1:option2:...> (TV only)
- Tune the TV channel scanner. MPlayer will also print value
for "-tv channels=" option, including existing and just found
channels.
- autostart
- Begin channel scanning immediately after startup (default: disabled).
- period=<0.1-2.0>
- Specify delay in seconds before switching to next channel (default: 0.5). Lower values will cause faster scanning, but can detect inactive TV channels as active.
- threshold=<1-100>
- Threshold value for the signal strength (in percent), as reported by the device (default: 50). A signal strength higher than this value will indicate that the currently scanning channel is active.
- -user <username> (also see -passwd) (network only)
- Specify username for HTTP authentication.
- -user-agent <string>
- Use <string> as user agent for HTTP streaming.
- -vid <ID>
- Select video channel (MPG: 0-15, ASF: 0-255, MPEG-TS: 17-8190). When playing an MPEG-TS stream, MPlayer will use the first program (if present) with the chosen video stream.
- -vivo <suboption> (DEBUG CODE)
- Force audio parameters for the VIVO demuxer (for debugging purposes). FIXME: Document this.
OSD/SUBTITLE OPTIONS¶
NOTE: Also see -vf expand.- -ass, -noass (FreeType only)
- Use libass to render all text subtitles. This enables
support for the native styling of SSA/ASS subtitles, and also support for
some styling features in other subtitle formats by conversion to ASS
markup. Enabled by default if the player was compiled with libass support.
- -ass-border-color <value>
- Sets the border (outline) color for text subtitles. The color format is RRGGBBAA.
- -ass-bottom-margin <value>
- Adds a black band at the bottom of the frame. The SSA/ASS renderer can place subtitles there (with -ass-use-margins).
- -ass-color <value>
- Sets the color for text subtitles. The color format is RRGGBBAA.
- -ass-font-scale <value>
- Set the scale coefficient to be used for fonts in the SSA/ASS renderer.
- -ass-force-style <[Style.]Param=Value[,...]>
- Override some style or script info parameters.
-ass-force-style
FontName=Arial,Default.Bold=1
-ass-force-style PlayResY=768
- -ass-hinting <type>
- Set hinting type. <type> can be:
- 0
- no hinting
- 1
- FreeType autohinter, light mode
- 2
- FreeType autohinter, normal mode
- 3
- font native hinter
- 0-3 + 4
- The same, but hinting will only be performed if the OSD is rendered at screen resolution and will therefore not be scaled.
The default value is 5 (use light hinter for
unscaled OSD and no hinting otherwise).
- -ass-line-spacing <value>
- Set line spacing value for SSA/ASS renderer.
- -ass-styles <filename>
- Load all SSA/ASS styles found in the specified file and use them for rendering text subtitles. The syntax of the file is exactly like the [V4 Styles] / [V4+ Styles] section of SSA/ASS.
- -ass-top-margin <value>
- Adds a black band at the top of the frame. The SSA/ASS renderer can place toptitles there (with -ass-use-margins).
- -ass-use-margins
- Enables placing toptitles and subtitles in black borders when they are available.
- -ass-vsfilter-aspect-compat
- Stretch SSA/ASS subtitles when playing anamorphic videos
for compatibility with traditional VSFilter behavior. This switch has no
effect when the video is stored with square pixels.
- -dumpjacosub
- Convert the given subtitle (specified with the -sub option) to the time-based JACOsub subtitle format. Creates a dumpsub.js file in the current directory.
- -dumpmicrodvdsub
- Convert the given subtitle (specified with the -sub option) to the MicroDVD subtitle format. Creates a dumpsub.sub file in the current directory.
- -dumpmpsub
- Convert the given subtitle (specified with the -sub option) to MPlayer's subtitle format, MPsub. Creates a dump.mpsub file in the current directory.
- -dumpsami
- Convert the given subtitle (specified with the -sub option) to the time-based SAMI subtitle format. Creates a dumpsub.smi file in the current directory.
- -dumpsrtsub
- Convert the given subtitle (specified with the -sub option)
to the time-based SubViewer (SRT) subtitle format. Creates a dumpsub.srt
file in the current directory.
- -dumpsub (BETA CODE)
- Dumps the subtitle substream from VOB streams. Also see the -dump*sub options.
- -noembeddedfonts
- Disables use of fonts embedded in Matroska containers and ASS scripts (default: enabled). These fonts can be used for SSA/ASS subtitle rendering (-ass option).
- -ffactor <number>
- Resample the font alphamap. Can be:
- 0
- plain white fonts
- 0.75
- very narrow black outline (default)
- 1
- narrow black outline
- 10
- bold black outline
- -flip-hebrew (FriBiDi only)
- Turns on flipping subtitles using FriBiDi.
- -noflip-hebrew-commas
- Change FriBiDi's assumptions about the placements of commas in subtitles. Use this if commas in subtitles are shown at the start of a sentence instead of at the end.
- -font <path to font.desc file, path to font (FreeType), font pattern (Fontconfig)>
- Search for the OSD/SUB fonts in an alternative directory
(default for normal fonts: ~/.mplayer/font/font.desc, default for FreeType
fonts: ~/.mplayer/subfont.ttf).
-font ~/.mplayer/arial-14/font.desc
-font ~/.mplayer/arialuni.ttf
-font 'Bitstream Vera Sans'
-font 'Bitstream Vera Sans:style=Bold'
- -fontconfig, -nofontconfig (fontconfig only)
- Enables the use of fontconfig managed fonts. Enabled by default.
- -forcedsubsonly
- Display only forced subtitles for the DVD subtitle stream selected by e.g. -slang.
- -fribidi-charset <charset name> (FriBiDi only)
- Specifies the character set that will be passed to FriBiDi when decoding non-UTF-8 subtitles (default: ISO8859-8).
- -ifo <VOBsub IFO file>
- Indicate the file that will be used to load palette and frame size for VOBsub subtitles.
- -noautosub
- Turns off automatic subtitle file loading.
- -osd-duration <time>
- Set the duration of the OSD messages in ms (default: 1000).
- -osd-fractions <0-2>
- Set how fractions of seconds of the current timestamp are printed on the OSD:
- 0
- Do not display fractions (default).
- 1
- Show the first two decimals.
- 2
- Show approximate frame count within current second. This frame count is not accurate but only an approximation. For variable fps, the approximation is known to be far off the correct frame count.
- -osdlevel <0-3>
- Specifies which mode the OSD should start in.
- 0
- subtitles only
- 1
- volume + seek (default)
- 2
- volume + seek + timer + percentage
- 3
- volume + seek + timer + percentage + total time
- -overlapsub
- Allows the next subtitle to be displayed while the current one is still visible (default is to enable the support only for specific formats).
- -sid <ID> (also see -slang, -vobsubid)
- Display the subtitle stream specified by <ID> (0-31). MPlayer prints the available subtitle IDs when run in verbose (-v) mode. If you cannot select one of the subtitles on a DVD, also try -vobsubid.
- -nosub
- Disables any otherwise auto-selected internal subtitles (as e.g. the Matroska/mkv demuxer supports). Use -noautosub to disable the loading of external subtitle files.
- -slang <language code[,language code,...]> (also see -sid)
- Specify a priority list of subtitle languages to use.
Different container formats employ different language codes. DVDs use ISO
639-1 two letter language codes, Matroska uses ISO 639-2 three letter
language codes while OGM uses a free-form identifier. MPlayer prints the
available languages when run in verbose (-v) mode.
- mplayer dvd://1 -slang hu,en
- Chooses the Hungarian subtitle track on a DVD and falls back on English if Hungarian is not available.
- mplayer -slang jpn example.mkv
- Plays a Matroska file with Japanese subtitles.
- -spuaa <mode>
- Antialiasing/scaling mode for DVD/VOBsub. A value of 16 may be added to <mode> in order to force scaling even when original and scaled frame size already match. This can be employed to e.g. smooth subtitles with gaussian blur. Available modes are:
- 0
- none (fastest, very ugly)
- 1
- approximate (broken?)
- 2
- full (slow)
- 3
- bilinear (default, fast and not too bad)
- 4
- uses swscaler gaussian blur (looks very good)
- -spualign <-1-2>
- Specify how SPU (DVD/VOBsub) subtitles should be aligned.
- -1
- original position
- 0
- Align at top (original behavior, default).
- 1
- Align at center.
- 2
- Align at bottom.
- -spugauss <0.0-3.0>
- Variance parameter of gaussian used by -spuaa 4. Higher means more blur (default: 1.0).
- -sub <subtitlefile1,subtitlefile2,...>
- Use/display these subtitle files. Only one file can be displayed at the same time.
- -sub-bg-alpha <0-255>
- Specify the alpha channel value for subtitles and OSD backgrounds. Big values mean more transparency. 0 means completely transparent.
- -sub-bg-color <0-255>
- Specify the color value for subtitles and OSD backgrounds. Currently subtitles are grayscale so this value is equivalent to the intensity of the color. 255 means white and 0 black.
- -sub-demuxer <[+]name> (-subfile only) (BETA CODE)
- Force subtitle demuxer type for -subfile. Use a '+' before the name to force it, this will skip some checks! Give the demuxer name as printed by -sub-demuxer help.
- -sub-fuzziness <mode>
- Adjust matching fuzziness when searching for subtitles:
- 0
- exact match
- 1
- Load all subs containing movie name.
- 2
- Load all subs in the current and -sub-paths directories.
- -sub-no-text-pp
- Disables any kind of text post processing done after loading the subtitles. Used for debug purposes.
- -subalign <0-2>
- Specify which edge of the subtitles should be aligned at the height given by -subpos.
- 0
- Align subtitle top edge (original behavior).
- 1
- Align subtitle center.
- 2
- Align subtitle bottom edge (default).
- -subcc <1-4>
- Display DVD Closed Caption (CC) subtitles from the specified channel. These are not the VOB subtitles, these are special ASCII subtitles for the hearing impaired encoded in the VOB userdata stream on most region 1 DVDs. CC subtitles have not been spotted on DVDs from other regions so far.
- -subcp <codepage> (iconv only)
- If your system supports iconv(3), you can use this option
to specify the subtitle codepage.
-subcp latin2
-subcp cp1250
- -subcp enca:<language>:<fallback codepage> (ENCA only)
- You can specify your language using a two letter language
code to make ENCA detect the codepage automatically. If unsure, enter
anything and watch mplayer -v output for available languages. Fallback
codepage specifies the codepage to use, when autodetection fails.
- -subcp enca:cs:latin2
- Guess the encoding, assuming the subtitles are Czech, fall back on latin 2, if the detection fails.
- -subcp enca:pl:cp1250
- Guess the encoding for Polish, fall back on cp1250.
- -sub-paths <path1:path2:...>
- Specify extra directories where to search for subtitles
matching the video. Multiple directories can be separated by ":"
(";" on Windows). Paths can be relative or absolute. Relative
paths are interpreted relative to video file directory.
/path/to/movie/
/path/to/movie/sub/
/path/to/movie/subtitles/
/tmp/subs/
~/.mplayer/sub/
- -subdelay <sec>
- Delays subtitles by <sec> seconds. Can be negative.
- -subfile <filename> (BETA CODE)
- Currently useless. Same as -audiofile, but for subtitle streams (OggDS?).
- -subfont <path to font (FreeType), font pattern (Fontconfig)> (FreeType only)
- Sets the subtitle font (see -font). If no -subfont is given, -font is used.
- -subfont-autoscale <0-3> (FreeType only)
- Sets the autoscale mode.
- 0
- no autoscale
- 1
- proportional to movie height
- 2
- proportional to movie width
- 3
- proportional to movie diagonal (default)
- -subfont-blur <0-8> (FreeType only)
- Sets the font blur radius (default: 2).
- -subfont-encoding <value> (FreeType only)
- Sets the font encoding. When set to 'unicode', all the glyphs from the font file will be rendered and unicode will be used (default: unicode).
- -subfont-osd-scale <0-100> (FreeType only)
- Sets the autoscale coefficient of the OSD elements (default: 6).
- -subfont-outline <0-8> (FreeType only)
- Sets the font outline thickness (default: 2).
- -subfont-text-scale <0-100> (FreeType only)
- Sets the subtitle text autoscale coefficient as percentage of the screen size (default: 5).
- -subfps <rate>
- Specify the framerate of the subtitle file (default: movie
fps).
- -subpos <0-100> (useful with -vf expand)
- Specify the position of subtitles on the screen. The value is the vertical position of the subtitle in % of the screen height.
- -subwidth <10-100>
- Specify the maximum width of subtitles on the screen. Useful for TV-out. The value is the width of the subtitle in % of the screen width.
- -noterm-osd
- Disable the display of OSD messages on the console when no video output is available.
- -term-osd-esc <escape sequence>
- Specify the escape sequence to use before writing an OSD message on the console. The escape sequence should move the pointer to the beginning of the line used for the OSD and clear it (default: ^[[A\r^[[K).
- -unicode
- Tells MPlayer to handle the subtitle file as unicode.
- -unrarexec <path to unrar executable> (not supported on MingW)
- Specify the path to the unrar executable so MPlayer can use it to access rar-compressed VOBsub files (default: not set, so the feature is off). The path must include the executable's filename, i.e. /usr/local/bin/unrar.
- -utf8
- Tells MPlayer to handle the subtitle file as UTF-8.
- -vobsub <VOBsub file without extension>
- Specify a VOBsub file to use for subtitles. Has to be the full pathname without extension, i.e. without the '.idx', '.ifo' or '.sub'.
- -vobsubid <0-31>
- Specify the VOBsub subtitle ID.
AUDIO OUTPUT OPTIONS¶
- -abs <value> (-ao oss only) (OBSOLETE)
- Override audio driver/card buffer size detection.
- -format <format> (also see the format audio filter)
- Select the sample format used for output from the audio filter layer to the sound card. The values that <format> can adopt are listed below in the description of the format audio filter.
- -gapless-audio
- Try to play consecutive audio files with no silence or disruption at the point of file change. This feature is implemented in a simple manner and relies on audio output device buffering to continue playback while moving from one file to another. If playback of the new file starts slowly, for example because it's played from a remote network location or because you have specified cache settings that require time for the initial cache fill, then the buffered audio may run out before playback of the new file can start.
- -mixer <device>
- Use a mixer device different from the default /dev/mixer. For ALSA this is the mixer name.
- -mixer-channel <mixer line>[,mixer index] (-ao oss and -ao alsa only)
- This option will tell MPlayer to use a different channel
for controlling volume than the default PCM. Options for OSS include
vol, pcm, line. For a complete list of options look for
SOUND_DEVICE_NAMES in /usr/include/linux/soundcard.h. For ALSA you can use
the names e.g. alsamixer displays, like Master, Line, PCM.
- -softvol
- Force the use of the software mixer, instead of using the sound card mixer.
- -softvol-max <10.0-10000.0>
- Set the maximum amplification level in percent (default: 110). A value of 200 will allow you to adjust the volume up to a maximum of double the current level. With values below 100 the initial volume (which is 100%) will be above the maximum, which e.g. the OSD cannot display correctly.
- -volstep <0-100>
- Set the step size of mixer volume changes in percent of the whole range (default: 3).
- -volume <-1-100> (also see -af volume)
- Set the startup volume in the mixer, either hardware or software (if used with -softvol). A value of -1 (the default) will not change the volume.
AUDIO OUTPUT DRIVERS¶
Audio output drivers are interfaces to different audio output facilities. The syntax is:- -ao <driver1[:suboption1[=value]:...],driver2,...[,]>
- Specify a priority list of audio output drivers to be used.
- -ao alsa,oss,
- Try the ALSA driver, then the OSS driver, then others.
- -ao alsa:noblock:device=hw=0.3
- Sets noblock-mode and the device-name as first card, fourth device.
- alsa
- ALSA 0.9/1.x audio output driver
- noblock
- Sets noblock-mode.
- device=<device>
- Sets the device name. Replace any ',' with '.' and any ':' with '=' in the ALSA device name. For hwac3 output via S/PDIF, use an "iec958" or "spdif" device, unless you really know how to set it correctly.
- alsa5
- ALSA 0.5 audio output driver
- oss
- OSS audio output driver
- <dsp-device>
- Sets the audio output device (default: /dev/dsp).
- <mixer-device>
- Sets the audio mixer device (default: /dev/mixer).
- <mixer-channel>
- Sets the audio mixer channel (default: pcm).
- sdl (SDL only)
- highly platform independent SDL (Simple Directmedia Layer) library audio output driver
- <driver>
- Explicitly choose the SDL audio driver to use (default: let SDL choose).
- arts
- audio output through the aRts daemon
- esd
- audio output through the ESD daemon
- <server>
- Explicitly choose the ESD server to use (default: localhost).
- jack
- audio output through JACK (Jack Audio Connection Kit)
- port=<name>
- Connects to the ports with the given name (default: physical ports).
- name=<client
- Client name that is passed to JACK (default: MPlayer [<PID>]). Useful if you want to have certain connections established automatically.
- (no)estimate
- Estimate the audio delay, supposed to make the video playback smoother (default: enabled).
- (no)autostart
- Automatically start jackd if necessary (default: disabled). Note that this seems unreliable and will spam stdout with server messages.
- nas
- audio output through NAS
- coreaudio (Mac OS X only)
- native Mac OS X audio output driver
- device_id=<id>
- ID of output device to use (0 = default device)
- help
- List all available output devices with their IDs.
- openal
- Experimental OpenAL audio output driver
- pulse
- PulseAudio audio output driver
- [<host>][:<output sink>]
- Specify the host and optionally output sink to use. An empty <host> string uses a local connection, "localhost" uses network transfer (most likely not what you want).
- sgi (SGI only)
- native SGI audio output driver
- <output device name>
- Explicitly choose the output device/interface to use (default: system-wide default). For example, 'Analog Out' or 'Digital Out'.
- sun (Sun only)
- native Sun audio output driver
- <device>
- Explicitly choose the audio device to use (default: /dev/audio).
- win32 (Windows only)
- native Windows waveout audio output driver
- dsound (Windows only)
- DirectX DirectSound audio output driver
- device=<devicenum>
- Sets the device number to use. Playing a file with -v will show a list of available devices.
- kai (OS/2 only)
- OS/2 KAI audio output driver
- uniaud
- Force UNIAUD mode.
- dart
- Force DART mode.
- (no)share
- Open audio in shareable or exclusive mode.
- bufsize=<size>
- Set buffer size to <size> in samples (default: 2048).
- dart (OS/2 only)
- OS/2 DART audio output driver
- (no)share
- Open DART in shareable or exclusive mode.
- bufsize=<size>
- Set buffer size to <size> in samples (default: 2048).
- ivtv (IVTV only)
- IVTV specific MPEG audio output driver. Works with -ac hwmpa only.
- v4l2 (requires Linux 2.6.22+ kernel)
- Audio output driver for V4L2 cards with hardware MPEG decoder.
- mpegpes (DVB only)
- Audio output driver for DVB cards that writes the output to an MPEG-PES file if no DVB card is installed.
- card=<1-4>
- DVB card to use if more than one card is present. If not specified MPlayer will search the first usable card.
- file=<filename>
- output filename
- null
- Produces no audio output but maintains video playback speed. Use -nosound for benchmarking.
- pcm
- raw PCM/wave file writer audio output
- (no)waveheader
- Include or do not include the wave header (default: included). When not included, raw PCM will be generated.
- file=<filename>
- Write the sound to <filename> instead of the default audiodump.wav. If nowaveheader is specified, the default is audiodump.pcm.
- rsound
- audio output to an RSound daemon
- host=<name/path>
- Set the address of the server (default: localhost). Can be either a network hostname for TCP connections or a Unix domain socket path starting with '/'.
- port=<number>
- Set the TCP port used for connecting to the server (default: 12345). Not used if connecting to a Unix domain socket.
- plugin
- plugin audio output driver
VIDEO OUTPUT OPTIONS¶
- -adapter <value>
- Set the graphics card that will receive the image. You can get a list of available cards when you run this option with -v. Currently only works with the directx video output driver.
- -bpp <depth>
- Override the autodetected color depth. Only supported by the fbdev, dga, svga, vesa video output drivers.
- -border
- Play movie with window border and decorations. Since this is on by default, use -noborder to disable the standard window decorations.
- -brightness <-100-100>
- Adjust the brightness of the video signal (default: 0). Not supported by all video output drivers.
- -contrast <-100-100>
- Adjust the contrast of the video signal (default: 0). Not supported by all video output drivers.
- -display <name> (X11 only)
- Specify the hostname and display number of the X server you
want to display on.
-display xtest.localdomain:0
- -dr
- Turns on direct rendering (not supported by all codecs and
video outputs)
- -fbmode <modename> (-vo fbdev only)
- Change video mode to the one that is labeled as
<modename> in /etc/fb.modes.
- -fbmodeconfig <filename> (-vo fbdev only)
- Override framebuffer mode configuration file (default: /etc/fb.modes).
- -force-window-position
- Forcefully move MPlayer's video output window to default location whenever there is a change in video parameters, video stream or file. This used to be the default behavior. Currently only affects X11 VOs.
- -fs (also see -zoom)
- Fullscreen playback (centers movie, and paints black bands around it). Not supported by all video output drivers.
- -fsmode-dontuse <0-31> (OBSOLETE, use the -fs option)
- Try this option if you still experience fullscreen problems.
- -fstype <type1,type2,...> (X11 only)
- Specify a priority list of fullscreen modes to be used. You
can negate the modes by prefixing them with '-'. If you experience
problems like the fullscreen window being covered by other windows try
using a different order.
- above
- Use the _NETWM_STATE_ABOVE hint if available.
- below
- Use the _NETWM_STATE_BELOW hint if available.
- fullscreen
- Use the _NETWM_STATE_FULLSCREEN hint if available.
- layer
- Use the _WIN_LAYER hint with the default layer.
- layer=<0...15>
- Use the _WIN_LAYER hint with the given layer number.
- netwm
- Force NETWM style.
- none
- Clear the list of modes; you can add modes to enable afterward.
- stays_on_top
- Use _NETWM_STATE_STAYS_ON_TOP hint if available.
EXAMPLE:
- layer,stays_on_top,above,fullscreen
- Default order, will be used as a fallback if incorrect or unsupported modes are specified.
- -fullscreen
- Fixes fullscreen switching on OpenBox 1.x.
- -gamma <-100-100>
- Adjust the gamma of the video signal (default: 0). Not supported by all video output drivers.
- -geometry x[%][:y[%]] or [WxH][+-x+-y]
- Adjust where the output is on the screen initially. The x
and y specifications are in pixels measured from the top-left of the
screen to the top-left of the image being displayed, however if a
percentage sign is given after the argument it turns the value into a
percentage of the screen size in that direction. It also supports the
standard X11 -geometry option format, in which e.g. +10-50 means
"place 10 pixels from the left border and 50 pixels from the lower
border" and "--20+-10" means "place 20 pixels beyond
the right and 10 pixels beyond the top border". If an external window
is specified using the -wid option, then the x and y coordinates are
relative to the top-left corner of the window rather than the screen. The
coordinates are relative to the screen given with -xineramascreen for the
video output drivers that fully support -xineramascreen (direct3d, gl,
gl2, vdpau, x11, xv, corevideo).
- 50:40
- Places the window at x=50, y=40.
- 50%:50%
- Places the window in the middle of the screen.
- 100%
- Places the window at the middle of the right edge of the screen.
- 100%:100%
- Places the window at the bottom right corner of the screen.
- -hue <-100-100>
- Adjust the hue of the video signal (default: 0). You can get a colored negative of the image with this option. Not supported by all video output drivers.
- -monitor-dotclock <range[,range,...]> (-vo fbdev and vesa only)
- Specify the dotclock or pixelclock range of the monitor.
- -monitor-hfreq <range[,range,...]> (-vo fbdev and vesa only)
- Specify the horizontal frequency range of the monitor.
- -monitor-vfreq <range[,range,...]> (-vo fbdev and vesa only)
- Specify the vertical frequency range of the monitor.
- -monitoraspect <ratio> (also see -aspect)
- Set the aspect ratio of your monitor or TV screen. A value
of 0 disables a previous setting (e.g. in the config file). Overrides the
-monitorpixelaspect setting if enabled.
-monitoraspect 4:3 or 1.3333
-monitoraspect 16:9 or 1.7777
- -monitorpixelaspect <ratio> (also see -aspect)
- Set the aspect of a single pixel of your monitor or TV screen (default: 1). A value of 1 means square pixels (correct for (almost?) all LCDs).
- -name (X11 only)
- Set the window class name.
- -nodouble
- Disables double buffering, mostly for debugging purposes. Double buffering fixes flicker by storing two frames in memory, and displaying one while decoding another. It can affect OSD negatively, but often removes OSD flickering.
- -nograbpointer
- Do not grab the mouse pointer after a video mode change (-vm). Useful for multihead setups.
- -nokeepaspect
- Do not keep window aspect ratio when resizing windows. By default MPlayer tries to keep the correct video aspect ratio by instructing the window manager to maintain window aspect when resizing, and by adding black bars if the window manager nevertheless allows window shape to change. This option disables window manager aspect hints and scales the video to completely fill the window without regard for aspect ratio.
- -ontop
- Makes the player window stay on top of other windows. Supported by video output drivers which use X11, except SDL, as well as directx, corevideo, quartz, ggi and gl2.
- -panscan <0.0-1.0>
- Enables pan-and-scan functionality (cropping the sides of
e.g. a 16:9 movie to make it fit a 4:3 display without black bands). The
range controls how much of the image is cropped. May not work with all
video output drivers.
- -panscanrange <-19.0-99.0> (experimental)
- Change the range of the pan-and-scan functionality (default: 1). Positive values mean multiples of the default range. Negative numbers mean you can zoom in up to a factor of -panscanrange+1. E.g. -panscanrange -3 allows a zoom factor of up to 4. This feature is experimental. Do not report bugs unless you are using -vo gl.
- -refreshrate <Hz>
- Set the monitor refreshrate in Hz. Currently only supported by -vo directx combined with the -vm option.
- -rootwin
- Play movie in the root window (desktop background). Desktop background images may cover the movie window, though. May not work with all video output drivers.
- -saturation <-100-100>
- Adjust the saturation of the video signal (default: 0). You can get grayscale output with this option. Not supported by all video output drivers.
- -screenh <pixels>
- Specify the screen height for video output drivers which do not know the screen resolution like fbdev, x11 and TV-out.
- -screenw <pixels>
- Specify the screen width for video output drivers which do not know the screen resolution like fbdev, x11 and TV-out.
- -stop-xscreensaver (X11 only)
- Turns off xscreensaver at startup and turns it on again on exit. If your screensaver supports neither the XSS nor XResetScreenSaver API please use -heartbeat-cmd instead.
- -title (also see -use-filename-title)
- Set the window title. Supported by X11-based video output drivers.
- -use-filename-title (also see -title)
- Set the window title using the media filename, when not set with -title. Supported by X11-based video output drivers.
- -vm
- Try to change to a different video mode. Supported by the dga, x11, xv, sdl and directx video output drivers. If used with the directx video output driver the -screenw, -screenh, -bpp and -refreshrate options can be used to set the new display mode.
- -vsync
- Enables VBI for the vesa, dfbmga and svga video output drivers.
- -wid <window ID> (X11, OpenGL and DirectX only)
- This tells MPlayer to attach to an existing window. Useful to embed MPlayer in a browser (e.g. the plugger extension). This option fills the given window completely, thus aspect scaling, panscan, etc are no longer handled by MPlayer but must be managed by the application that created the window.
- -xineramascreen <-2-...>
- In Xinerama configurations (i.e. a single desktop that spans across multiple displays) this option tells MPlayer which screen to display the movie on. A value of -2 means fullscreen across the whole virtual display (in this case Xinerama information is completely ignored), -1 means fullscreen on the display the window currently is on. The initial position set via the -geometry option is relative to the specified screen. Will usually only work with "-fstype -fullscreen" or "-fstype none". This option is not suitable to only set the startup screen (because it will always display on the given screen in fullscreen mode), -geometry is the best that is available for that purpose currently. Supported by at least the direct3d, gl, gl2, x11, xv and corevideo video output drivers.
VIDEO OUTPUT DRIVERS¶
Video output drivers are interfaces to different video output facilities. The syntax is:- -vo <driver1[:suboption1[=value]:...],driver2,...[,]>
- Specify a priority list of video output drivers to be used.
- -vo xmga,xv,
- Try the Matrox X11 driver, then the Xv driver, then others.
- -vo directx:noaccel
- Uses the DirectX driver with acceleration features turned off.
- xv (X11 only)
- Uses the XVideo extension of XFree86 4.x to enable hardware accelerated playback. If you cannot use a hardware specific driver, this is probably the best option. For information about what colorkey is used and how it is drawn run MPlayer with -v option and look out for the lines tagged with [xv common] at the beginning.
- adaptor=<number>
- Select a specific XVideo adaptor (check xvinfo results).
- port=<number>
- Select a specific XVideo port.
- ck=<cur|use|set>
- Select the source from which the colorkey is taken (default: cur).
- cur
- The default takes the colorkey currently set in Xv.
- use
- Use but do not set the colorkey from MPlayer (use -colorkey option to change it).
- set
- Same as use but also sets the supplied colorkey.
- ck-method=<man|bg|auto>
- Sets the colorkey drawing method (default: man).
- man
- Draw the colorkey manually (reduces flicker in some cases).
- bg
- Set the colorkey as window background.
- auto
- Let Xv draw the colorkey.
- x11 (X11 only)
- Shared memory video output driver without hardware acceleration that works whenever X11 is present.
- xover (X11 only)
- Adds X11 support to all overlay based video output drivers. Currently only supported by tdfx_vid.
- <vo_driver>
- Select the driver to use as source to overlay on top of X11.
- vdpau (X11 only)
- Uses the VDPAU interface to display and optionally also decode video. Hardware decoding is used with -vc ffmpeg12vdpau, ffwmv3vdpau, ffvc1vdpau, ffh264vdpau or ffodivxvdpau.
- sharpen=<-1-1>
- For positive values, apply a sharpening algorithm to the video, for negative values a blurring algorithm (default: 0).
- denoise=<0-1>
- Apply a noise reduction algorithm to the video (default: 0, no noise reduction).
- deint=<-4-4>
- Select deinterlacing mode (default: -3). Positive values choose mode and enable deinterlacing. Corresponding negative values select the same deinterlacing mode, but do not enable deinterlacing on startup (useful in configuration files to specify what mode will be enabled by the "D" key). All modes respect -field-dominance.
- 0
- same as -3
- 1
- Show only first field, similar to -vf field.
- 2
- Bob deinterlacing, similar to -vf tfields=1.
- 3
- motion adaptive temporal deinterlacing. May lead to A/V desync with slow video hardware and/or high resolution.
- 4
- motion adaptive temporal deinterlacing with edge-guided spatial interpolation. Needs fast video hardware.
- chroma-deint
- Makes temporal deinterlacers operate both on luma and chroma (default). Use nochroma-deint to solely use luma and speed up advanced deinterlacing. Useful with slow video memory.
- pullup
- Try to apply inverse telecine, needs motion adaptive temporal deinterlacing.
- colorspace=<0-3>
- Select the color space for YUV to RGB conversion. In general BT.601 should be used for standard definition (SD) content and BT.709 for high definition (HD) content. Using incorrect color space results in slightly under or over saturated and shifted colors.
- 0
- Guess the color space based on video resolution. Video with width >= 1280 or height > 576 is assumed to be HD and BT.709 color space will be used.
- 1
- Use ITU-R BT.601 color space (default).
- 2
- Use ITU-R BT.709 color space.
- 3
- Use SMPTE-240M color space.
- hqscaling=<0-9>
- 0
- Use default VDPAU scaling (default).
- 1-9
- Apply high quality VDPAU scaling (needs capable hardware).
- studio
- Output video in studio level RGB (16-235). This is what TVs and video monitors generally expect. By default PC level RGB (0-255) suitable for PC monitors is used. Providing studio level output to a device expecting PC level input results in grey blacks and dim whites, the reverse in crushed blacks and whites.
- fps=<number>
- Override autodetected display refresh rate value (the value is needed for framedrop to allow video playback rates higher than display refresh rate, and for vsync-aware frame timing adjustments). Default 0 means use autodetected value. A positive value is interpreted as a refresh rate in Hz and overrides the autodetected value. A negative value disables all timing adjustment and framedrop logic.
- queuetime_windowed=<number>
- queuetime_fs=<number>
- Use VDPAU's presentation queue functionality to queue future video frame changes at most this many milliseconds in advance (default: 50). See below for additional information.
- output_surfaces=<2-15>
- Allocate this many output surfaces to display video frames (default: 3). See below for additional information.
- dga (X11 only)
- Play video through the XFree86 Direct Graphics Access extension. Considered obsolete.
- sdl (SDL only, buggy/outdated)
- Highly platform independent SDL (Simple Directmedia Layer) library video output driver. Since SDL uses its own X11 layer, MPlayer X11 options do not have any effect on SDL. Note that it has several minor bugs (-vm/-novm is mostly ignored, -fs behaves like -novm should, window is in top-left corner when returning from fullscreen, panscan is not supported, ...).
- driver=<driver>
- Explicitly choose the SDL driver to use.
- (no)forcexv
- Use XVideo through the sdl video output driver (default: forcexv).
- (no)hwaccel
- Use hardware accelerated scaler (default: hwaccel).
- direct3d (Windows only) (BETA CODE!)
- Video output driver that uses the Direct3D interface (useful for Vista).
- directx (Windows only)
- Video output driver that uses the DirectX interface.
- noaccel
- Turns off hardware acceleration. Try this option if you have display problems.
- kva (OS/2 only)
- Video output driver that uses the libkva interface.
- snap
- Force SNAP mode.
- wo
- Force WarpOverlay! mode.
- dive
- Force DIVE mode.
- (no)t23
- Enable or disable workaround for T23 laptop (default: disabled). Try to enable this option if your video card supports upscaling only.
- quartz (Mac OS X only)
- Mac OS X Quartz video output driver. Under some circumstances, it might be more efficient to force a packed YUV output format, with e.g. -vf format=yuy2.
- device_id=<number>
- Choose the display device to use in fullscreen.
- fs_res=<width>:<height>
- Specify the fullscreen resolution (useful on slow systems).
- corevideo (Mac OS X 10.4 or 10.3.9 with QuickTime 7)
- Mac OS X CoreVideo video output driver
- device_id=<number>
- Choose the display device to use for fullscreen or set it to -1 to always use the same screen the video window is on (default: -1 - auto).
- shared_buffer
- Write output to a shared memory buffer instead of displaying it and try to open an existing NSConnection for communication with a GUI.
- buffer_name=<name>
- Name of the shared buffer created with shm_open as well as the name of the NSConnection MPlayer will try to open (default: "mplayerosx"). Setting buffer_name implicitly enables shared_buffer.
- fbdev (Linux only)
- Uses the kernel framebuffer to play video.
- <device>
- Explicitly choose the fbdev device name to use (e.g. /dev/fb0).
- fbdev2 (Linux only)
- Uses the kernel framebuffer to play video, alternative implementation.
- <device>
- Explicitly choose the fbdev device name to use (default: /dev/fb0).
- vesa
- Very general video output driver that should work on any VESA VBE 2.0 compatible card.
- (no)dga
- Turns DGA mode on or off (default: on).
- neotv_pal
- Activate the NeoMagic TV out and set it to PAL norm.
- neotv_ntsc
- Activate the NeoMagic TV out and set it to NTSC norm.
- lvo:
- Activate the Linux Video Overlay on top of VESA mode.
- svga
- Play video using the SVGA library.
- <video mode>
- Specify video mode to use. The mode can be given in a <width>x<height>x<colors> format, e.g. 640x480x16M or be a graphics mode number, e.g. 84.
- bbosd
- Draw OSD into black bands below the movie (slower).
- native
- Use only native drawing functions. This avoids direct rendering, OSD and hardware acceleration.
- retrace
- Force frame switch on vertical retrace. Usable only with -double. It has the same effect as the -vsync option.
- sq
- Try to select a video mode with square pixels.
- gl
- OpenGL video output driver, simple version. Video size must
be smaller than the maximum texture size of your OpenGL implementation.
Intended to work even with the most basic OpenGL implementations, but also
makes use of newer extensions, which allow support for more colorspaces
and direct rendering. For optimal speed try adding the options
- (no)ati-hack
- ATI drivers may give a corrupted image when PBOs are used (when using -dr or force-pbo). This option fixes this, at the expense of using a bit more memory.
- (no)force-pbo
- Always uses PBOs to transfer textures even if this involves an extra copy. Currently this gives a little extra speed with NVidia drivers and a lot more speed with ATI drivers. May need -noslices and the ati-hack suboption to work correctly.
- (no)scaled-osd
- Changes the way the OSD behaves when the size of the window changes (default: disabled). When enabled behaves more like the other video output drivers, which is better for fixed-size fonts. Disabled looks much better with FreeType fonts and uses the borders in fullscreen mode. Does not work correctly with ass subtitles (see -ass), you can instead render them without OpenGL support via -vf ass.
- osdcolor=<0xAARRGGBB>
- Color for OSD (default: 0x00ffffff, corresponds to non-transparent white).
- rectangle=<0,1,2>
- Select usage of rectangular textures which saves video RAM, but often is slower (default: 0).
0: Use power-of-two textures (default).
1: Use the GL_ARB_texture_rectangle extension.
2: Use the GL_ARB_texture_non_power_of_two extension. In some cases only
supported in software and thus very slow.
- swapinterval=<n>
- Minimum interval between two buffer swaps, counted in displayed frames (default: 1). 1 is equivalent to enabling VSYNC, 0 to disabling VSYNC. Values below 0 will leave it at the system default. This limits the framerate to (horizontal refresh rate / n). Requires GLX_SGI_swap_control support to work. With some (most/all?) implementations this only works in fullscreen mode.
- ycbcr
- Use the GL_MESA_ycbcr_texture extension to convert YUV to RGB. In most cases this is probably slower than doing software conversion to RGB.
- yuv=<n>
- Select the type of YUV to RGB conversion. The default is auto-detection deciding between values 0 and 2.
0: Use software conversion. Compatible with
all OpenGL versions. Provides brightness, contrast and saturation control.
1: Use register combiners. This uses an nVidia-specific extension
(GL_NV_register_combiners). At least three texture units are needed. Provides
saturation and hue control. This method is fast but inexact.
2: Use a fragment program. Needs the GL_ARB_fragment_program extension and at
least three texture units. Provides brightness, contrast, saturation and hue
control.
3: Use a fragment program using the POW instruction. Needs the
GL_ARB_fragment_program extension and at least three texture units. Provides
brightness, contrast, saturation, hue and gamma control. Gamma can also be set
independently for red, green and blue. Method 4 is usually faster.
4: Use a fragment program with additional lookup. Needs the
GL_ARB_fragment_program extension and at least four texture units. Provides
brightness, contrast, saturation, hue and gamma control. Gamma can also be set
independently for red, green and blue.
5: Use ATI-specific method (for older cards). This uses an ATI-specific
extension (GL_ATI_fragment_shader - not GL_ARB_fragment_shader!). At least
three texture units are needed. Provides saturation and hue control. This
method is fast but inexact.
6: Use a 3D texture to do conversion via lookup. Needs the
GL_ARB_fragment_program extension and at least four texture units. Extremely
slow (software emulation) on some (all?) ATI cards since it uses a texture
with border pixels. Provides brightness, contrast, saturation, hue and gamma
control. Gamma can also be set independently for red, green and blue. Speed
depends more on GPU memory bandwidth than other methods.
- colorspace
- Select the color space for YUV to RGB conversion.
- 0
- Use the formula used normally by MPlayer (default).
- 1
- Use ITU-R BT.601 color space.
- 2
- Use ITU-R BT.709 color space.
- 3
- Use SMPTE-240M color space.
- levelconv=<n>
- Select the brightness level conversion to use for the YUV to RGB conversion
- 0
- Convert TV to PC levels (default).
- 1
- Convert PC to TV levels.
- 2
- Do not do any conversion.
- lscale=<n>
- Select the scaling function to use for luminance scaling. Only valid for yuv modes 2, 3, 4 and 6.
- 0
- Use simple linear filtering (default).
- 1
- Use bicubic B-spline filtering (better quality). Needs one additional texture unit. Older cards will not be able to handle this for chroma at least in fullscreen mode.
- 2
- Use cubic filtering in horizontal, linear filtering in vertical direction. Works on a few more cards than method 1.
- 3
- Same as 1 but does not use a lookup texture. Might be faster on some cards.
- 4
- Use experimental unsharp masking with 3x3 support and a default strength of 0.5 (see filter-strength).
- 5
- Use experimental unsharp masking with 5x5 support and a default strength of 0.5 (see filter-strength).
- cscale=<n>
- Select the scaling function to use for chrominance scaling. For details see lscale.
- filter-strength=<value>
- Set the effect strength for the lscale/cscale filters that support it.
- stereo=<value>
- Select a method for stereo display. You may have to use -aspect to fix the aspect value. Experimental, do not expect too much from it.
- 0
- normal 2D display
- 1
- Convert side by side input to full-color red-cyan stereo.
- 2
- Convert side by side input to full-color green-magenta stereo.
- 3
- Convert side by side input to quadbuffered stereo. Only supported by very few OpenGL cards.
The following options are only useful if
writing your own fragment programs.
- customprog=<filename>
- Load a custom fragment program from <filename>. See TOOLS/edgedect.fp for an example.
- customtex=<filename>
- Load a custom "gamma ramp" texture from <filename>. This can be used in combination with yuv=4 or with the customprog option.
- (no)customtlin
- If enabled (default) use GL_LINEAR interpolation, otherwise use GL_NEAREST for customtex texture.
- (no)customtrect
- If enabled, use texture_rectangle for customtex texture. Default is disabled.
- (no)mipmapgen
- If enabled, mipmaps for the video are automatically generated. This should be useful together with the customprog and the TXB instruction to implement blur filters with a large radius. For most OpenGL implementations this is very slow for any non-RGB formats. Default is disabled.
Normally there is no reason to use the
following options, they mostly exist for testing purposes.
- (no)glfinish
- Call glFinish() before swapping buffers. Slower but in some cases more correct output (default: disabled).
- (no)manyfmts
- Enables support for more (RGB and BGR) color formats (default: enabled). Needs OpenGL version >= 1.2.
- slice-height=<0-...>
- Number of lines copied to texture in one piece (default:
0). 0 for whole image.
If the decoder uses slice rendering (see
-noslices), this setting has no effect, the size of the slices as provided by
the decoder is used.
If the decoder does not use slice rendering, the default is 16.
- (no)osd
- Enable or disable support for OSD rendering via OpenGL (default: enabled). This option is for testing; to disable the OSD use -osdlevel 0 instead.
- (no)aspect
- Enable or disable aspect scaling and pan-and-scan support (default: enabled). Disabling might increase speed.
- gl2
- Variant of the OpenGL video output driver. Supports videos larger than the maximum texture size but lacks many of the advanced features and optimizations of the gl driver and is unlikely to be extended further.
- (no)glfinish
- same as gl (default: enabled)
- yuv=<n>
- Select the type of YUV to RGB conversion. If set to anything except 0 OSD will be disabled and brightness, contrast and gamma setting is only available via the global X server settings. Apart from this the values have the same meaning as for -vo gl.
- matrixview
- OpenGL-based renderer creating a Matrix-like running-text effect.
- cols=<n>
- Number of text columns to display. Very low values (< 16) will probably fail due to scaler limitations. Values not divisible by 16 may cause issues as well.
- rows=<n>
- Number of text rows to display. Very low values (< 16) will probably fail due to scaler limitations. Values not divisible by 16 may cause issues as well.
- null
- Produces no video output. Useful for benchmarking.
- aa
- ASCII art video output driver that works on a text console.
You can get a list and an explanation of available suboptions by executing
'mplayer -vo aa:help'.
- caca
- Color ASCII art video output driver that works on a text console.
- bl
- Video playback using the Blinkenlights UDP protocol. This driver is highly hardware specific.
- <subdevice>
- Explicitly choose the Blinkenlights subdevice driver to use. It is something like arcade:host=localhost:2323 or hdl:file=name1,file=name2. You must specify a subdevice.
- ggi
- GGI graphics system video output driver
- <driver>
- Explicitly choose the GGI driver to use. Replace any ',' that would appear in the driver string by a '.'.
- directfb
- Play video using the DirectFB library.
- (no)input
- Use the DirectFB instead of the MPlayer keyboard code (default: enabled).
- buffermode=single|double|triple
- Double and triple buffering give best results if you want to avoid tearing issues. Triple buffering is more efficient than double buffering as it does not block MPlayer while waiting for the vertical retrace. Single buffering should be avoided (default: single).
- fieldparity=top|bottom
- Control the output order for interlaced frames (default: disabled). Valid values are top = top fields first, bottom = bottom fields first. This option does not have any effect on progressive film material like most MPEG movies are. You need to enable this option if you have tearing issues or unsmooth motions watching interlaced film material.
- layer=N
- Will force layer with ID N for playback (default: -1 - auto).
- dfbopts=<list>
- Specify a parameter list for DirectFB.
- dfbmga
- Matrox G400/G450/G550 specific video output driver that uses the DirectFB library to make use of special hardware features. Enables CRTC2 (second head), displaying video independently of the first head.
- (no)input
- same as directfb (default: disabled)
- buffermode=single|double|triple
- same as directfb (default: triple)
- fieldparity=top|bottom
- same as directfb
- (no)bes
- Enable the use of the Matrox BES (backend scaler) (default: disabled). Gives very good results concerning speed and output quality as interpolated picture processing is done in hardware. Works only on the primary head.
- (no)spic
- Make use of the Matrox sub picture layer to display the OSD (default: enabled).
- (no)crtc2
- Turn on TV-out on the second head (default: enabled). The output quality is amazing as it is a full interlaced picture with proper sync to every odd/even field.
- tvnorm=pal|ntsc|auto
- Will set the TV norm of the Matrox card without the need for modifying /etc/directfbrc (default: disabled). Valid norms are pal = PAL, ntsc = NTSC. Special norm is auto (auto-adjust using PAL/NTSC) because it decides which norm to use by looking at the framerate of the movie.
- mga (Linux only)
- Matrox specific video output driver that makes use of the YUV back end scaler on Gxxx cards through a kernel module. If you have a Matrox card, this is the fastest option.
- <device>
- Explicitly choose the Matrox device name to use (default: /dev/mga_vid).
- xmga (Linux, X11 only)
- The mga video output driver, running in an X11 window.
- <device>
- Explicitly choose the Matrox device name to use (default: /dev/mga_vid).
- s3fb (Linux only) (also see -dr)
- S3 Virge specific video output driver. This driver supports the card's YUV conversion and scaling, double buffering and direct rendering features. Use -vf format=yuy2 to get hardware-accelerated YUY2 rendering, which is much faster than YV12 on this card.
- <device>
- Explicitly choose the fbdev device name to use (default: /dev/fb0).
- wii (Linux only)
- Nintendo Wii/GameCube specific video output driver.
- 3dfx (Linux only)
- 3dfx-specific video output driver that directly uses the hardware on top of X11. Only 16 bpp are supported.
- tdfxfb (Linux only)
- This driver employs the tdfxfb framebuffer driver to play movies with YUV acceleration on 3dfx cards.
- <device>
- Explicitly choose the fbdev device name to use (default: /dev/fb0).
- tdfx_vid (Linux only)
- 3dfx-specific video output driver that works in combination with the tdfx_vid kernel module.
- <device>
- Explicitly choose the device name to use (default: /dev/tdfx_vid).
- dxr3 (DXR3 only)
- Sigma Designs em8300 MPEG decoder chip (Creative DXR3, Sigma Designs Hollywood Plus) specific video output driver. Also see the lavc video filter.
- overlay
- Activates the overlay instead of TV-out.
- prebuf
- Turns on prebuffering.
- sync
- Will turn on the new sync-engine.
- norm=<norm>
- Specifies the TV norm.
0: Does not change current norm (default).
1: Auto-adjust using PAL/NTSC.
2: Auto-adjust using PAL/PAL-60.
3: PAL
4: PAL-60
5: NTSC
- <0-3>
- Specifies the device number to use if you have more than one em8300 card.
- ivtv (IVTV only)
- Conexant CX23415 (iCompression iTVC15) or Conexant CX23416 (iCompression iTVC16) MPEG decoder chip (Hauppauge WinTV PVR-150/250/350/500) specific video output driver for TV-out. Also see the lavc video filter.
- <device>
- Explicitly choose the MPEG decoder device name to use (default: /dev/video16).
- <output>
- Explicitly choose the TV-out output to be used for the video signal.
- v4l2 (requires Linux 2.6.22+ kernel)
- Video output driver for V4L2 compliant cards with built-in hardware MPEG decoder. Also see the lavc video filter.
- <device>
- Explicitly choose the MPEG decoder device name to use (default: /dev/video16).
- <output>
- Explicitly choose the TV-out output to be used for the video signal.
- mpegpes (DVB only)
- Video output driver for DVB cards that writes the output to an MPEG-PES file if no DVB card is installed.
- card=<1-4>
- Specifies the device number to use if you have more than one DVB output card (V3 API only, such as 1.x.y series drivers). If not specified MPlayer will search the first usable card.
- <filename>
- output filename (default: ./grab.mpg)
- md5sum
- Calculate MD5 sums of each frame and write them to a file. Supports RGB24 and YV12 colorspaces. Useful for debugging.
- outfile=<value>
- Specify the output filename (default: ./md5sums).
- yuv4mpeg
- Transforms the video stream into a sequence of uncompressed YUV 4:2:0 images and stores it in a file (default: ./stream.yuv). The format is the same as the one employed by mjpegtools, so this is useful if you want to process the video with the mjpegtools suite. It supports the YV12 format. If your source file has a different format and is interlaced, make sure to use -vf scale=::1 to ensure the conversion uses interlaced mode. You can combine it with the -fixed-vo option to concatenate files with the same dimensions and fps value.
- interlaced
- Write the output as interlaced frames, top field first.
- interlaced_bf
- Write the output as interlaced frames, bottom field first.
- file=<filename>
- Write the output to <filename> instead of the default stream.yuv.
- gif89a
- Output each frame into a single animated GIF file in the current directory. It supports only RGB format with 24 bpp and the output is converted to 256 colors.
- <fps>
- Float value to specify framerate (default: 5.0).
- <output>
- Specify the output filename (default: ./out.gif).
mplayer video.nut -vo
gif89a:fps=15:output=test.gif
- jpeg
- Output each frame into a JPEG file in the current directory. Each file takes the frame number padded with leading zeros as name.
- [no]progressive
- Specify standard or progressive JPEG (default: noprogressive).
- [no]baseline
- Specify use of baseline or not (default: baseline).
- optimize=<0-100>
- optimization factor (default: 100)
- smooth=<0-100>
- smooth factor (default: 0)
- quality=<0-100>
- quality factor (default: 75)
- outdir=<dirname>
- Specify the directory to save the JPEG files to (default: ./).
- subdirs=<prefix>
- Create numbered subdirectories with the specified prefix to save the files in instead of the current directory.
- maxfiles=<value> (subdirs only)
- Maximum number of files to be saved per subdirectory. Must be equal to or larger than 1 (default: 1000).
- pnm
- Output each frame into a PNM file in the current directory. Each file takes the frame number padded with leading zeros as name. It supports PPM, PGM and PGMYUV files in both raw and ASCII mode. Also see pnm(5), ppm(5) and pgm(5).
- ppm
- Write PPM files (default).
- pgm
- Write PGM files.
- pgmyuv
- Write PGMYUV files. PGMYUV is like PGM, but it also contains the U and V plane, appended at the bottom of the picture.
- raw
- Write PNM files in raw mode (default).
- ascii
- Write PNM files in ASCII mode.
- outdir=<dirname>
- Specify the directory to save the PNM files to (default: ./).
- subdirs=<prefix>
- Create numbered subdirectories with the specified prefix to save the files in instead of the current directory.
- maxfiles=<value> (subdirs only)
- Maximum number of files to be saved per subdirectory. Must be equal to or larger than 1 (default: 1000).
- png
- Output each frame into a PNG file in the current directory. Each file takes the frame number padded with leading zeros as name. 24bpp RGB and BGR formats are supported.
- z=<0-9>
- Specifies the compression level. 0 is no compression, 9 is maximum compression.
- alpha
- Create PNG files with an alpha channel. Note that MPlayer in general does not support alpha, so this will only be useful in some rare cases.
- tga
- Output each frame into a Targa file in the current
directory. Each file takes the frame number padded with leading zeros as
name. The purpose of this video output driver is to have a simple lossless
image writer to use without any external library. It supports the BGR[A]
color format, with 15, 24 and 32 bpp. You can force a particular format
with the format video filter.
mplayer video.nut -vf format=bgr15 -vo
tga
DECODING/FILTERING OPTIONS¶
- -ac <[-|+]codec1,[-|+]codec2,...[,]>
- Specify a priority list of audio codecs to be used,
according to their codec name in codecs.conf. Use a '-' before the codec
name to omit it. Use a '+' before the codec name to force it, this will
likely crash! If the list has a trailing ',' MPlayer will fall back on
codecs not contained in the list.
- -ac mp3acm
- Force the l3codeca.acm MP3 codec.
- -ac mad,
- Try libmad first, then fall back on others.
- -ac hwac3,a52,
- Try hardware AC-3 passthrough, software AC-3, then others.
- -ac hwdts,
- Try hardware DTS passthrough, then fall back on others.
- -ac -ffmp3,
- Skip FFmpeg's MP3 decoder.
- -af-adv <force=(0-7):list=(filters)> (also see -af)
- Specify advanced audio filter options:
- force=<0-7>
- Forces the insertion of audio filters to one of the following:
0: Use completely automatic filter insertion
(currently identical to 1).
1: Optimize for accuracy (default).
2: Optimize for speed. Warning: Some features in the audio filters may
silently fail, and the sound quality may drop.
3: Use no automatic insertion of filters and no optimization. Warning: It
may be possible to crash MPlayer using this setting.
4: Use automatic insertion of filters according to 0 above, but use floating
point processing when possible.
5: Use automatic insertion of filters according to 1 above, but use floating
point processing when possible.
6: Use automatic insertion of filters according to 2 above, but use floating
point processing when possible.
7: Use no automatic insertion of filters according to 3 above, and use floating
point processing when possible.
- list=<filters>
- Same as -af.
- -afm <driver1,driver2,...>
- Specify a priority list of audio codec families to be used,
according to their codec name in codecs.conf. Falls back on the default
codecs if none of the given codec families work.
- -afm ffmpeg
- Try FFmpeg's libavcodec codecs first.
- -afm acm,dshow
- Try Win32 codecs first.
- -aspect <ratio> (also see -zoom)
- Override movie aspect ratio, in case aspect information is
incorrect or missing in the file being played.
-aspect 4:3 or -aspect 1.3333
-aspect 16:9 or -aspect 1.7777
- -noaspect
- Disable automatic movie aspect ratio compensation.
- -field-dominance <-1-1>
- Set first field for interlaced content. Useful for deinterlacers that double the framerate: -vf tfields=1, -vf yadif=1 and -vo vdpau:deint.
- -1
- auto (default): If the decoder does not export the appropriate information, it falls back to 0 (top field first).
- 0
- top field first
- 1
- bottom field first
- -flip
- Flip image upside-down.
- -lavdopts <option1:option2:...> (DEBUG CODE)
- Specify libavcodec decoding parameters. Separate multiple
options with a colon.
-lavdopts
gray:skiploopfilter=all:skipframe=nonref
Available options are:
- bitexact
- Only use bit-exact algorithms in all decoding steps (for codec testing).
- bug=<value>
- Manually work around encoder bugs.
0: nothing
1: autodetect bugs (default)
2 (msmpeg4v3): some old lavc generated msmpeg4v3 files (no autodetection)
4 (mpeg4): Xvid interlacing bug (autodetected if fourcc==XVIX)
8 (mpeg4): UMP4 (autodetected if fourcc==UMP4)
16 (mpeg4): padding bug (autodetected)
32 (mpeg4): illegal vlc bug (autodetected per fourcc)
64 (mpeg4): Xvid and DivX qpel bug (autodetected per fourcc/version)
128 (mpeg4): old standard qpel (autodetected per fourcc/version)
256 (mpeg4): another qpel bug (autodetected per fourcc/version)
512 (mpeg4): direct-qpel-blocksize bug (autodetected per fourcc/version)
1024 (mpeg4): edge padding bug (autodetected per fourcc/version)
- debug=<value>
- Display debugging information.
- ec=<value>
- Set error concealment strategy.
1: Use strong deblock filter for damaged MBs.
2: iterative motion vector (MV) search (slow)
3: all (default)
- er=<value>
- Set error resilience strategy.
- fast (MPEG-2, MPEG-4, and H.264 only)
- Enable optimizations which do not comply to the specification and might potentially cause problems, like simpler dequantization, simpler motion compensation, assuming use of the default quantization matrix, assuming YUV 4:2:0 and skipping a few checks to detect damaged bitstreams.
- gray
- grayscale only decoding (a bit faster than with color)
- idct=<0-99> (see -lavcopts)
- For best decoding quality use the same IDCT algorithm for decoding and encoding. This may come at a price in accuracy, though.
- lowres=<number>[,<w>]
- Decode at lower resolutions. Low resolution decoding is not supported by all codecs, and it will often result in ugly artifacts. This is not a bug, but a side effect of not decoding at full resolution.
If <w> is specified lowres decoding will
be used only if the width of the video is major than or equal to
<w>.
o=<key>=<value>[,<key>=<value>[,...]] Pass
AVOptions to libavcodec decoder. Note, a patch to make the o= unneeded and
pass all unknown options through the AVOption system is welcome. A full list
of AVOptions can be found in the FFmpeg manual.
EXAMPLE:
- o=debug=pict
- sb=<number> (MPEG-2 only)
- Skip the given number of macroblock rows at the bottom.
- st=<number> (MPEG-2 only)
- Skip the given number of macroblock rows at the top.
- skiploopfilter=<skipvalue> (H.264 only)
- Skips the loop filter (AKA deblocking) during H.264
decoding. Since the filtered frame is supposed to be used as reference for
decoding dependent frames this has a worse effect on quality than not
doing deblocking on e.g. MPEG-2 video. But at least for high bitrate HDTV
this provides a big speedup with no visible quality loss.
- skipidct=<skipvalue> (MPEG-1/2 only)
- Skips the IDCT step. This degrades quality a lot of in almost all cases (see skiploopfilter for available skip values).
- skipframe=<skipvalue>
- Skips decoding of frames completely. Big speedup, but jerky motion and sometimes bad artifacts (see skiploopfilter for available skip values).
- threads=<0-16>
- Number of threads to use for decoding. Whether threading is actually supported depends on codec. 0 means autodetect number of cores on the machine and use that, up to the maximum of 16. (default: 0)
- vismv=<value>
- Visualize motion vectors.
- vstats
- Prints some statistics and stores them in ./vstats_*.log.
- -noslices
- Disable drawing video by 16-pixel height slices/bands, instead draws the whole frame in a single run. May be faster or slower, depending on video card and available cache. It has effect only with libmpeg2 and libavcodec codecs.
- -nosound
- Do not play sound. Useful for benchmarking.
- -novideo
- Do not play video. With some demuxers this may not work. In those cases you can try -vc null -vo null instead; but "-vc null" is always unreliable.
- -pp <quality> (also see -vf pp)
- Set the DLL postprocess level. This option is no longer usable with -vf pp. It only works with Win32 DirectShow DLLs with internal postprocessing routines. The valid range of -pp values varies by codec, it is mostly 0-6, where 0=disable, 6=slowest/best.
- -pphelp (also see -vf pp)
- Show a summary about the available postprocess filters and their usage.
- -ssf <mode>
- Specifies software scaler parameters.
-vf scale -ssf lgb=3.0
- lgb=<0-100>
- gaussian blur filter (luma)
- cgb=<0-100>
- gaussian blur filter (chroma)
- ls=<-100-100>
- sharpen filter (luma)
- cs=<-100-100>
- sharpen filter (chroma)
- chs=<h>
- chroma horizontal shifting
- cvs=<v>
- chroma vertical shifting
- -stereo <mode>
- Select type of MP2/MP3 stereo output.
- 0
- stereo
- 1
- left channel
- 2
- right channel
- -sws <software scaler type> (also see -vf scale and -zoom)
- Specify the software scaler algorithm to be used with the
-zoom option. This affects video output drivers which lack hardware
acceleration, e.g. x11.
- 0
- fast bilinear
- 1
- bilinear
- 2
- bicubic (good quality) (default)
- 3
- experimental
- 4
- nearest neighbor (bad quality)
- 5
- area
- 6
- luma bicubic / chroma bilinear
- 7
- gauss
- 8
- sincR
- 9
- lanczos
- 10
- natural bicubic spline
NOTE: Some -sws options are tunable.
The description of the scale video filter has further information.
- -vc <[-|+]codec1,[-|+]codec2,...[,]>
- Specify a priority list of video codecs to be used,
according to their codec name in codecs.conf. Use a '-' before the codec
name to omit it. Use a '+' before the codec name to force it, this will
likely crash! If the list has a trailing ',' MPlayer will fall back on
codecs not contained in the list.
- -vc divx
- Force Win32/VfW DivX codec, no fallback.
- -vc -divxds,-divx,
- Skip Win32 DivX codecs.
- -vc ffmpeg12,mpeg12,
- Try libavcodec's MPEG-1/2 codec, then libmpeg2, then others.
- -vfm <driver1,driver2,...>
- Specify a priority list of video codec families to be used,
according to their names in codecs.conf. Falls back on the default codecs
if none of the given codec families work.
- -vfm ffmpeg,dshow,vfw
- Try the libavcodec, then Directshow, then VfW codecs and fall back on others, if they do not work.
- -vfm xanim
- Try XAnim codecs first.
- -x <x> (also see -zoom)
- Scale image to width <x> (if software/hardware scaling is available). Disables aspect calculations.
- -xvidopts <option1:option2:...>
- Specify additional parameters when decoding with Xvid.
- deblock-chroma (also see -vf pp)
- chroma deblock filter
- deblock-luma (also see -vf pp)
- luma deblock filter
- dering-luma (also see -vf pp)
- luma deringing filter
- dering-chroma (also see -vf pp)
- chroma deringing filter
- filmeffect (also see -vf noise)
- Adds artificial film grain to the video. May increase perceived quality, while lowering true quality.
rendering methods:
- dr2
- Activate direct rendering method 2.
- nodr2
- Deactivate direct rendering method 2.
- -xy <value> (also see -zoom)
- value<=8
- Scale image by factor <value>.
- value>8
- Set width to value and calculate height to keep correct aspect ratio.
- -y <y> (also see -zoom)
- Scale image to height <y> (if software/hardware scaling is available). Disables aspect calculations.
- -zoom
- Allow software scaling, where available. This will allow scaling with output drivers (like x11, fbdev) that do not support hardware scaling where MPlayer disables scaling by default for performance reasons.
AUDIO FILTERS¶
Audio filters allow you to modify the audio stream and its properties. The syntax is:- -af <filter1[=parameter1:parameter2:...],filter2,...>
- Setup a chain of audio filters.
- -af-add <filter1[,filter2,...]>
- Appends the filters given as arguments to the filter list.
- -af-pre <filter1[,filter2,...]>
- Prepends the filters given as arguments to the filter list.
- -af-del <index1[,index2,...]>
- Deletes the filters at the given indexes. Index numbers start at 0, negative numbers address the end of the list (-1 is the last).
- -af-clr
- Completely empties the filter list.
- resample[=srate[:sloppy[:type]]]
- Changes the sample rate of the audio stream. Can be used if you have a fixed frequency sound card or if you are stuck with an old sound card that is only capable of max 44.1kHz. This filter is automatically enabled if necessary. It only supports 16-bit integer and float in native-endian format as input.
- <srate>
- output sample frequency in Hz. The valid range for this parameter is 8000 to 192000. If the input and output sample frequency are the same or if this parameter is omitted the filter is automatically unloaded. A high sample frequency normally improves the audio quality, especially when used in combination with other filters.
- <sloppy>
- Allow (1) or disallow (0) the output frequency to differ slightly from the frequency given by <srate> (default: 1). Can be used if the startup of the playback is extremely slow.
- <type>
- Select which resampling method to use.
0: linear interpolation (fast, poor quality
especially when upsampling)
1: polyphase filterbank and integer processing
2: polyphase filterbank and floating point processing (slow, best quality)
EXAMPLE:
- mplayer -af resample=44100:0:0
- would set the output frequency of the resample filter to 44100Hz using exact output frequency scaling and linear interpolation.
- lavcresample[=srate[:length[:linear[:count[:cutoff]]]]]
- Changes the sample rate of the audio stream to an integer <srate> in Hz. It only supports the 16-bit native-endian format.
- <srate>
- the output sample rate
- <length>
- length of the filter with respect to the lower sampling rate (default: 16)
- <linear>
- if 1 then filters will be linearly interpolated between polyphase entries
- <count>
- log2 of the number of polyphase entries (..., 10->1024, 11->2048, 12->4096, ...) (default: 10->1024)
- <cutoff>
- cutoff frequency (0.0-1.0), default set depending upon filter length
- lavcac3enc[=tospdif[:bitrate[:minchn]]]
- Encode multi-channel audio to AC-3 at runtime using
libavcodec. Supports 16-bit native-endian input format, maximum 6
channels. The output is big-endian when outputting a raw AC-3 stream,
native-endian when outputting to S/PDIF. The output sample rate of this
filter is same with the input sample rate. When input sample rate is
48kHz, 44.1kHz, or 32kHz, this filter directly use it. Otherwise a
resampling filter is auto-inserted before this filter to make the input
and output sample rate be 48kHz. You need to specify '-channels N' to make
the decoder decode audio into N-channel, then the filter can encode the
N-channel input to AC-3.
- <tospdif>
- Output raw AC-3 stream if zero or not set, output to S/PDIF for passthrough when <tospdif> is set non-zero.
- <bitrate>
- The bitrate to encode the AC-3 stream. Set it to either 384
or 384000 to get 384kbits. Valid values: 32, 40, 48, 56, 64, 80, 96, 112,
128, 160, 192, 224, 256,
320, 384, 448, 512, 576, 640 Default bitrate is based on the input channel number: 1ch: 96, 2ch: 192, 3ch: 224, 4ch: 384, 5ch: 448, 6ch: 448
- <minchn>
- If the input channel number is less than <minchn>, the filter will detach itself (default: 5).
- sweep[=speed]
- Produces a sine sweep.
- <0.0-1.0>
- Sine function delta, use very low values to hear the sweep.
- sinesuppress[=freq:decay]
- Remove a sine at the specified frequency. Useful to get rid of the 50/60Hz noise on low quality audio equipment. It probably only works on mono input.
- <freq>
- The frequency of the sine which should be removed (in Hz) (default: 50)
- <decay>
- Controls the adaptivity (a larger value will make the filter adapt to amplitude and phase changes quicker, a smaller value will make the adaptation slower) (default: 0.0001). Reasonable values are around 0.001.
- bs2b[=option1:option2:...]
- Bauer stereophonic to binaural transformation using libbs2b. Improves the headphone listening experience by making the sound similar to that from loudspeakers, allowing each ear to hear both channels and taking into account the distance difference and the head shadowing effect. It is applicable only to 2 channel audio.
- fcut=<300-1000>
- Set cut frequency in Hz.
- feed=<10-150>
- Set feed level for low frequencies in 0.1*dB.
- profile=<value>
- Several profiles are available for convenience:
- default
- will be used if nothing else was specified (fcut=700, feed=45)
- cmoy
- Chu Moy circuit implementation (fcut=700, feed=60)
- jmeier
- Jan Meier circuit implementation (fcut=650, feed=95)
If fcut or feed options are specified together
with a profile, they will be applied on top of the selected profile.
- hrtf[=flag]
- Head-related transfer function: Converts multichannel audio
to 2 channel output for headphones, preserving the spatiality of the
sound.
- Flag Meaning
- m matrix decoding of the rear channel
- s 2-channel matrix decoding
- 0 no matrix decoding (default)
- equalizer=[g1:g2:g3:...:g10]
- 10 octave band graphic equalizer, implemented using 10 IIR
band pass filters. This means that it works regardless of what type of
audio is being played back. The center frequencies for the 10 bands are:
- No. frequency
- 0 31.25 Hz
- 1 62.50 Hz
- 2 125.00 Hz
- 3 250.00 Hz
- 4 500.00 Hz
- 5 1.00 kHz
- 6 2.00 kHz
- 7 4.00 kHz
- 8 8.00 kHz
- 9 16.00 kHz
If the sample rate of the sound being played
is lower than the center frequency for a frequency band, then that band will
be disabled. A known bug with this filter is that the characteristics for the
uppermost band are not completely symmetric if the sample rate is close to the
center frequency of that band. This problem can be worked around by upsampling
the sound using the resample filter before it reaches this filter.
- <g1>:<g2>:<g3>:...:<g10>
- floating point numbers representing the gain in dB for each frequency band (-12-12)
EXAMPLE:
- mplayer -af equalizer=11:11:10:5:0:-12:0:5:12:12 media.avi
- Would amplify the sound in the upper and lower frequency region while canceling it almost completely around 1kHz.
- channels=nch[:nr:from1:to1:from2:to2:from3:to3:...]
- Can be used for adding, removing, routing and copying audio channels. If only <nch> is given the default routing is used, it works as follows: If the number of output channels is bigger than the number of input channels empty channels are inserted (except mixing from mono to stereo, then the mono channel is repeated in both of the output channels). If the number of output channels is smaller than the number of input channels the exceeding channels are truncated.
- <nch>
- number of output channels (1-8)
- <nr>
- number of routes (1-8)
- <from1:to1:from2:to2:from3:to3:...>
- Pairs of numbers between 0 and 7 that define where to route each channel.
EXAMPLE:
- mplayer -af channels=4:4:0:1:1:0:2:2:3:3 media.avi
- Would change the number of channels to 4 and set up 4 routes that swap channel 0 and channel 1 and leave channel 2 and 3 intact. Observe that if media containing two channels was played back, channels 2 and 3 would contain silence but 0 and 1 would still be swapped.
- mplayer -af channels=6:4:0:0:0:1:0:2:0:3 media.avi
- Would change the number of channels to 6 and set up 4 routes that copy channel 0 to channels 0 to 3. Channel 4 and 5 will contain silence.
- format[=format] (also see -format)
- Convert between different sample formats. Automatically enabled when needed by the sound card or another filter.
- <format>
- Sets the desired format. The general form is 'sbe', where 's' denotes the sign (either 's' for signed or 'u' for unsigned), 'b' denotes the number of bits per sample (16, 24 or 32) and 'e' denotes the endianness ('le' means little-endian, 'be' big-endian and 'ne' the endianness of the computer MPlayer is running on). Valid values (amongst others) are: 's16le', 'u32be' and 'u24ne'. Exceptions to this rule that are also valid format specifiers: u8, s8, floatle, floatbe, floatne, mulaw, alaw, mpeg2, ac3 and imaadpcm.
- volume[=v[:sc]]
- Implements software volume control. Use this filter with
caution since it can reduce the signal to noise ratio of the sound. In
most cases it is best to set the level for the PCM sound to max, leave
this filter out and control the output level to your speakers with the
master volume control of the mixer. In case your sound card has a digital
PCM mixer instead of an analog one, and you hear distortion, use the
MASTER mixer instead. If there is an external amplifier connected to the
computer (this is almost always the case), the noise level can be
minimized by adjusting the master level and the volume knob on the
amplifier until the hissing noise in the background is gone.
- <v>
- Sets the desired gain in dB for all channels in the stream from -200dB to +60dB, where -200dB mutes the sound completely and +60dB equals a gain of 1000 (default: 0).
- <sc>
- Turns soft clipping on (1) or off (0). Soft-clipping can
make the sound more smooth if very high volume levels are used. Enable
this option if the dynamic range of the loudspeakers is very low.
EXAMPLE:
- mplayer -af volume=10.1:0 media.avi
- Would amplify the sound by 10.1dB and hard-clip if the sound level is too high.
- pan=n[:L00:L01:L02:...L10:L11:L12:...Ln0:Ln1:Ln2:...]
- Mixes channels arbitrarily. Basically a combination of the volume and the channels filter that can be used to down-mix many channels to only a few, e.g. stereo to mono or vary the "width" of the center speaker in a surround sound system. This filter is hard to use, and will require some tinkering before the desired result is obtained. The number of options for this filter depends on the number of output channels. An example how to downmix a six-channel file to two channels with this filter can be found in the examples section near the end.
- <n>
- number of output channels (1-8)
- <Lij>
- How much of input channel i is mixed into output channel j (0-1). So in principle you first have n numbers saying what to do with the first input channel, then n numbers that act on the second input channel etc. If you do not specify any numbers for some input channels, 0 is assumed.
EXAMPLE:
- mplayer -af pan=1:0.5:0.5 media.avi
- Would down-mix from stereo to mono.
- mplayer -af pan=3:1:0:0.5:0:1:0.5 media.avi
- Would give 3 channel output leaving channels 0 and 1 intact, and mix channels 0 and 1 into output channel 2 (which could be sent to a subwoofer for example).
- sub[=fc:ch]
- Adds a subwoofer channel to the audio stream. The audio
data used for creating the subwoofer channel is an average of the sound in
channel 0 and channel 1. The resulting sound is then low-pass filtered by
a 4th order Butterworth filter with a default cutoff frequency of 60Hz and
added to a separate channel in the audio stream.
- <fc>
- cutoff frequency in Hz for the low-pass filter (20Hz to 300Hz) (default: 60Hz) For the best result try setting the cutoff frequency as low as possible. This will improve the stereo or surround sound experience.
- <ch>
- Determines the channel number in which to insert the sub-channel audio. Channel number can be between 0 and 7 (default: 5). Observe that the number of channels will automatically be increased to <ch> if necessary.
EXAMPLE:
- mplayer -af sub=100:4 -channels 5 media.avi
- Would add a sub-woofer channel with a cutoff frequency of 100Hz to output channel 4.
- center
- Creates a center channel from the front channels. May currently be low quality as it does not implement a high-pass filter for proper extraction yet, but averages and halves the channels instead.
- <ch>
- Determines the channel number in which to insert the center channel. Channel number can be between 0 and 7 (default: 5). Observe that the number of channels will automatically be increased to <ch> if necessary.
- surround[=delay]
- Decoder for matrix encoded surround sound like Dolby Surround. Many files with 2 channel audio actually contain matrixed surround sound. Requires a sound card supporting at least 4 channels.
- <delay>
- delay time in ms for the rear speakers (0 to 1000) (default: 20) This delay should be set as follows: If d1 is the distance from the listening position to the front speakers and d2 is the distance from the listening position to the rear speakers, then the delay should be set to 15ms if d1 <= d2 and to 15 + 5*(d1-d2) if d1 > d2.
EXAMPLE:
- mplayer -af surround=15 -channels 4 media.avi
- Would add surround sound decoding with 15ms delay for the sound to the rear speakers.
- delay[=ch1:ch2:...]
- Delays the sound to the loudspeakers such that the sound from the different channels arrives at the listening position simultaneously. It is only useful if you have more than 2 loudspeakers.
- ch1,ch2,...
- The delay in ms that should be imposed on each channel (floating point number between 0 and 1000).
To calculate the required delay for the
different channels do as follows:
- 1.
- Measure the distance to the loudspeakers in meters in relation to your listening position, giving you the distances s1 to s5 (for a 5.1 system). There is no point in compensating for the subwoofer (you will not hear the difference anyway).
- 2.
- Subtract the distances s1 to s5 from the maximum distance, i.e. s[i] = max(s) - s[i]; i = 1...5.
- 3.
- Calculate the required delays in ms as d[i] = 1000*s[i]/342; i = 1...5.
EXAMPLE:
- mplayer -af delay=10.5:10.5:0:0:7:0 media.avi
- Would delay front left and right by 10.5ms, the two rear channels and the sub by 0ms and the center channel by 7ms.
- export[=mmapped_file[:nsamples]]
- Exports the incoming signal to other processes using memory
mapping (mmap()). Memory mapped areas contain a header:
int nch /*number of channels*/ int size /*buffer size*/ unsigned long long counter /*Used to keep sync, updated every time new data is exported.*/
- <mmapped_file>
- file to map data to (default: ~/.mplayer/mplayer-af_export)
- <nsamples>
- number of samples per channel (default: 512)
EXAMPLE:
- mplayer -af export=/tmp/mplayer-af_export:1024 media.avi
- Would export 1024 samples per channel to '/tmp/mplayer-af_export'.
- extrastereo[=mul]
- (Linearly) increases the difference between left and right channels which adds some sort of "live" effect to playback.
- <mul>
- Sets the difference coefficient (default: 2.5). 0.0 means mono sound (average of both channels), with 1.0 sound will be unchanged, with -1.0 left and right channels will be swapped.
- volnorm[=method:target]
- Maximizes the volume without distorting the sound.
- <method>
- Sets the used method.
1: Use a single sample to smooth the
variations via the standard weighted mean over past samples (default).
2: Use several samples to smooth the variations via the standard weighted mean
over past samples.
- <target>
- Sets the target amplitude as a fraction of the maximum for the sample type (default: 0.25).
- ladspa=file:label[:controls...]
- Load a LADSPA (Linux Audio Developer's Simple Plugin API) plugin. This filter is reentrant, so multiple LADSPA plugins can be used at once.
- <file>
- Specifies the LADSPA plugin library file. If LADSPA_PATH is set, it searches for the specified file. If it is not set, you must supply a fully specified pathname.
- <label>
- Specifies the filter within the library. Some libraries contain only one filter, but others contain many of them. Entering 'help' here, will list all available filters within the specified library, which eliminates the use of 'listplugins' from the LADSPA SDK.
- <controls>
- Controls are zero or more floating point values that determine the behavior of the loaded plugin (for example delay, threshold or gain). In verbose mode (add -v to the MPlayer command line), all available controls and their valid ranges are printed. This eliminates the use of 'analyseplugin' from the LADSPA SDK.
- comp
- Compressor/expander filter usable for microphone input. Prevents artifacts on very loud sound and raises the volume on very low sound. This filter is untested, maybe even unusable.
- gate
- Noise gate filter similar to the comp audio filter. This filter is untested, maybe even unusable.
- karaoke
- Simple voice removal filter exploiting the fact that voice is usually recorded with mono gear and later 'center' mixed onto the final audio stream. Beware that this filter will turn your signal into mono. Works well for 2 channel tracks; do not bother trying it on anything but 2 channel stereo.
- scaletempo[=option1:option2:...]
- Scales audio tempo without altering pitch, optionally
synced to playback speed (default).
- scale=<amount>
- Nominal amount to scale tempo. Scales this amount in addition to speed. (default: 1.0)
- stride=<amount>
- Length in milliseconds to output each stride. Too high of value will cause noticable skips at high scale amounts and an echo at low scale amounts. Very low values will alter pitch. Increasing improves performance. (default: 60)
- overlap=<percent>
- Percentage of stride to overlap. Decreasing improves performance. (default: .20)
- search=<amount>
- Length in milliseconds to search for best overlap position. Decreasing improves performance greatly. On slow systems, you will probably want to set this very low. (default: 14)
- speed=<tempo|pitch|both|none>
- Set response to speed change.
- tempo
- Scale tempo in sync with speed (default).
- pitch
- Reverses effect of filter. Scales pitch without altering tempo. Add ´[ speed_mult 0.9438743126816935´ and ´] speed_mult 1.059463094352953´ to your input.conf to step by musical semi-tones. WARNING: Loses sync with video.
- both
- Scale both tempo and pitch.
- none
- Ignore speed changes.
EXAMPLE:
- mplayer -af scaletempo -speed 1.2 media.ogg
- Would playback media at 1.2x normal speed, with audio at normal pitch. Changing playback speed, would change audio tempo to match.
- mplayer -af scaletempo=scale=1.2:speed=none -speed 1.2 media.ogg
- Would playback media at 1.2x normal speed, with audio at normal pitch, but changing playback speed has no effect on audio tempo.
- mplayer -af scaletempo=stride=30:overlap=.50:search=10 media.ogg
- Would tweak the quality and performace parameters.
- mplayer -af format=floatne,scaletempo media.ogg
- Would make scaletempo use float code. Maybe faster on some platforms.
- mplayer -af scaletempo=scale=1.2:speed=pitch audio.ogg
- Would playback audio file at 1.2x normal speed, with audio at normal pitch. Changing playback speed, would change pitch, leaving audio tempo at 1.2x.
- stats
- Collects and prints statistics about the audio stream, especially the volume. These statistics are especially intended to help adjusting the volume while avoiding clipping. The volumes are printed in dB and compatible with the volume audio filter.
VIDEO FILTERS¶
Video filters allow you to modify the video stream and its properties. The syntax is:- -vf <filter1[=parameter1:parameter2:...],filter2,...>
- Setup a chain of video filters.
- -vf-add <filter1[,filter2,...]>
- Appends the filters given as arguments to the filter list.
- -vf-pre <filter1[,filter2,...]>
- Prepends the filters given as arguments to the filter list.
- -vf-del <index1[,index2,...]>
- Deletes the filters at the given indexes. Index numbers start at 0, negative numbers address the end of the list (-1 is the last).
- -vf-clr
- Completely empties the filter list.
- -vf <filter>=help
- Prints the parameter names and parameter value ranges for a particular filter.
- -vf <filter=named_parameter1=value1[:named_parameter2=value2:...]>
- Sets a named parameter to the given value. Use on and off or yes and no to set flag parameters.
- crop[=w:h:x:y]
- Crops the given part of the image and discards the rest. Useful to remove black bands from widescreen movies.
- <w>,<h>
- Cropped width and height, defaults to original width and height.
- <x>,<y>
- Position of the cropped picture, defaults to center.
- cropdetect[=limit:round[:reset]]
- Calculates necessary cropping parameters and prints the recommended parameters to stdout.
- <limit>
- Threshold, which can be optionally specified from nothing
(0) to everything (255) (default: 24).
- <round>
- Value which the width/height should be divisible by
(default: 16). The offset is automatically adjusted to center the video.
Use 2 to get only even dimensions (needed for 4:2:2 video). 16 is best
when encoding to most video codecs.
- <reset>
- Counter that determines after how many frames cropdetect will reset the previously detected largest video area and start over to detect the current optimal crop area (default: 0). This can be useful when channel logos distort the video area. 0 indicates never reset and return the largest area encountered during playback.
- rectangle[=w:h:x:y]
- Draws a rectangle of the requested width and height at the specified coordinates over the image and prints current rectangle parameters to the console. This can be used to find optimal cropping parameters. If you bind the input.conf directive 'change_rectangle' to keystrokes, you can move and resize the rectangle on the fly.
- <w>,<h>
- width and height (default: -1, maximum possible width where boundaries are still visible.)
- <x>,<y>
- top left corner position (default: -1, uppermost leftmost)
- expand[=w:h:x:y:o:a:r]
- Expands (not scales) movie resolution to the given value and places the unscaled original at coordinates x, y. Can be used for placing subtitles/OSD in the resulting black bands.
- <w>,<h>
- Expanded width,height (default: original width,height).
Negative values for w and h are treated as offsets to the original size.
- expand=0:-50:0:0
- Adds a 50 pixel border to the bottom of the picture.
- <x>,<y>
- position of original image on the expanded image (default: center)
- <o>
- OSD/subtitle rendering
0: disable (default)
1: enable
- <a>
- Expands to fit an aspect instead of a resolution (default:
0).
- expand=800:::::4/3
- Expands to 800x600, unless the source is higher resolution, in which case it expands to fill a 4/3 aspect.
- <r>
- Rounds up to make both width and height divisible by <r> (default: 1).
- flip (also see -flip)
- Flips the image upside down.
- mirror
- Mirrors the image on the Y axis.
- rotate[=<0-7>]
- Rotates the image by 90 degrees and optionally flips it. For values between 4-7 rotation is only done if the movie geometry is portrait and not landscape.
- 0
- Rotate by 90 degrees clockwise and flip (default).
- 1
- Rotate by 90 degrees clockwise.
- 2
- Rotate by 90 degrees counterclockwise.
- 3
- Rotate by 90 degrees counterclockwise and flip.
- scale[=w:h[:interlaced[:chr_drop[:par[:par2[:presize[:noup[:arnd]]]]]]]]
- Scales the image with the software scaler (slow) and performs a YUV<->RGB colorspace conversion (also see -sws).
- <w>,<h>
- scaled width/height (default: original width/height)
0: scaled d_width/d_height
- <interlaced>
- Toggle interlaced scaling.
0: off (default)
1: on
- <chr_drop>
- chroma skipping
0: Use all available input lines for chroma.
1: Use only every 2. input line for chroma.
2: Use only every 4. input line for chroma.
3: Use only every 8. input line for chroma.
- <par>[:<par2>] (also see -sws)
- Set some scaling parameters depending on the type of scaler selected with -sws.
-sws 2 (bicubic): B (blurring) and C (ringing)
0.00:0.60 default
0.00:0.75 VirtualDub's "precise bicubic"
0.00:0.50 Catmull-Rom spline
0.33:0.33 Mitchell-Netravali spline
1.00:0.00 cubic B-spline
-sws 7 (gaussian): sharpness (0 (soft) - 100 (sharp))
-sws 9 (lanczos): filter length (1-10)
- <presize>
- Scale to preset sizes.
qntsc: 352x240 (NTSC quarter screen)
qpal: 352x288 (PAL quarter screen)
ntsc: 720x480 (standard NTSC)
pal: 720x576 (standard PAL)
sntsc: 640x480 (square pixel NTSC)
spal: 768x576 (square pixel PAL)
- <noup>
- Disallow upscaling past the original dimensions.
0: Allow upscaling (default).
1: Disallow upscaling if one dimension exceeds its original value.
2: Disallow upscaling if both dimensions exceed their original values.
- <arnd>
- Accurate rounding for the vertical scaler, which may be faster or slower than the default rounding.
0: Disable accurate rounding (default).
1: Enable accurate rounding.
- dsize[=aspect|w:h:aspect-method:r]
- Changes the intended display size/aspect at an arbitrary point in the filter chain. Aspect can be given as a fraction (4/3) or floating point number (1.33). Alternatively, you may specify the exact display width and height desired. Note that this filter does not do any scaling itself; it just affects what later scalers (software or hardware) will do when auto-scaling to correct aspect.
- <w>,<h>
- New display width and height. Can also be these special values:
0: original display width and height
- dsize=800:-2
- Specifies a display resolution of 800x600 for a 4/3 aspect video, or 800x450 for a 16/9 aspect video.
- <aspect-method>
- Modifies width and height according to original aspect ratios.
-1: Ignore original aspect ratio (default).
0: Keep display aspect ratio by using <w> and <h> as maximum resolution.
1: Keep display aspect ratio by using <w> and <h> as minimum resolution.
2: Keep video aspect ratio by using <w> and <h> as maximum resolution.
3: Keep video aspect ratio by using <w> and <h> as minimum resolution.
0: Keep display aspect ratio by using <w> and <h> as maximum resolution.
1: Keep display aspect ratio by using <w> and <h> as minimum resolution.
2: Keep video aspect ratio by using <w> and <h> as maximum resolution.
3: Keep video aspect ratio by using <w> and <h> as minimum resolution.
- dsize=800:600:0
- Specifies a display resolution of at most 800x600, or smaller, in order to keep aspect.
- <r>
- Rounds up to make both width and height divisible by <r> (default: 1).
- yvu9
- Forces software YVU9 to YV12 colorspace conversion. Deprecated in favor of the software scaler.
- yuvcsp
- Clamps YUV color values to the CCIR 601 range without doing real conversion.
- palette
- RGB/BGR 8 -> 15/16/24/32bpp colorspace conversion using palette.
- format[=fourcc[:outfourcc]]
- Restricts the colorspace for the next filter without doing
any conversion. Use together with the scale filter for a real conversion.
- <fourcc>
- format name like rgb15, bgr24, yv12, etc (default: yuy2)
- <outfourcc>
- Format name that should be substituted for the output. If
this is not 100% compatible with the <fourcc> value it will crash.
- noformat[=fourcc]
- Restricts the colorspace for the next filter without doing
any conversion. Unlike the format filter, this will allow any colorspace
except the one you specify.
- <fourcc>
- format name like rgb15, bgr24, yv12, etc (default: yv12)
- pp[=filter1[:option1[:option2...]]/[-]filter2...] (also see -pphelp)
- Enables the specified chain of postprocessing subfilters. Subfilters must be separated by '/' and can be disabled by prepending a '-'. Each subfilter and some options have a short and a long name that can be used interchangeably, i.e. dr/dering are the same. All subfilters share common options to determine their scope:
- a/autoq
- Automatically switch the subfilter off if the CPU is too slow.
- c/chrom
- Do chrominance filtering, too (default).
- y/nochrom
- Do luminance filtering only (no chrominance).
- n/noluma
- Do chrominance filtering only (no luminance).
- hb/hdeblock[:difference[:flatness]]
- horizontal deblocking filter
<difference>: Difference factor where
higher values mean more deblocking (default: 32).
<flatness>: Flatness threshold where lower values mean more deblocking
(default: 39).
- vb/vdeblock[:difference[:flatness]]
- vertical deblocking filter
<difference>: Difference factor where
higher values mean more deblocking (default: 32).
<flatness>: Flatness threshold where lower values mean more deblocking
(default: 39).
- ha/hadeblock[:difference[:flatness]]
- accurate horizontal deblocking filter
<difference>: Difference factor where
higher values mean more deblocking (default: 32).
<flatness>: Flatness threshold where lower values mean more deblocking
(default: 39).
- va/vadeblock[:difference[:flatness]]
- accurate vertical deblocking filter
<difference>: Difference factor where
higher values mean more deblocking (default: 32).
<flatness>: Flatness threshold where lower values mean more deblocking
(default: 39).
- h1/x1hdeblock
- experimental horizontal deblocking filter
- v1/x1vdeblock
- experimental vertical deblocking filter
- dr/dering
- deringing filter
- tn/tmpnoise[:threshold1[:threshold2[:threshold3]]]
- temporal noise reducer
<threshold1>: larger -> stronger
filtering
<threshold2>: larger -> stronger filtering
<threshold3>: larger -> stronger filtering
- al/autolevels[:f/fullyrange]
- automatic brightness / contrast correction
f/fullyrange: Stretch luminance to
(0-255).
- lb/linblenddeint
- Linear blend deinterlacing filter that deinterlaces the given block by filtering all lines with a (1 2 1) filter.
- li/linipoldeint
- Linear interpolating deinterlacing filter that deinterlaces the given block by linearly interpolating every second line.
- ci/cubicipoldeint
- Cubic interpolating deinterlacing filter deinterlaces the given block by cubically interpolating every second line.
- md/mediandeint
- Median deinterlacing filter that deinterlaces the given block by applying a median filter to every second line.
- fd/ffmpegdeint
- FFmpeg deinterlacing filter that deinterlaces the given block by filtering every second line with a (-1 4 2 4 -1) filter.
- l5/lowpass5
- Vertically applied FIR lowpass deinterlacing filter that deinterlaces the given block by filtering all lines with a (-1 2 6 2 -1) filter.
- fq/forceQuant[:quantizer]
- Overrides the quantizer table from the input with the constant quantizer you specify.
<quantizer>: quantizer to use
- de/default
- default pp filter combination (hb:a,vb:a,dr:a)
- fa/fast
- fast pp filter combination (h1:a,v1:a,dr:a)
- ac
- high quality pp filter combination (ha:a:128:7,va:a,dr:a)
- -vf pp=hb/vb/dr/al
- horizontal and vertical deblocking, deringing and automatic brightness/contrast
- -vf pp=de/-al
- default filters without brightness/contrast correction
- -vf pp=default/tmpnoise:1:2:3
- Enable default filters & temporal denoiser.
- -vf pp=hb:y/vb:a
- Horizontal deblocking on luminance only, and switch vertical deblocking on or off automatically depending on available CPU time.
- spp[=quality[:qp[:mode]]]
- Simple postprocessing filter that compresses and decompresses the image at several (or - in the case of quality level 6 - all) shifts and averages the results.
- <quality>
- 0-6 (default: 3)
- <qp>
- Force quantization parameter (default: 0, use QP from video).
- <mode>
- 0: hard thresholding (default)
- uspp[=quality[:qp]]
- Ultra simple & slow postprocessing filter that compresses and decompresses the image at several (or - in the case of quality level 8 - all) shifts and averages the results. The way this differs from the behavior of spp is that uspp actually encodes & decodes each case with libavcodec Snow, whereas spp uses a simplified intra only 8x8 DCT similar to MJPEG.
- <quality>
- 0-8 (default: 3)
- <qp>
- Force quantization parameter (default: 0, use QP from video).
- fspp[=quality[:qp[:strength[:bframes]]]]
- faster version of the simple postprocessing filter
- <quality>
- 4-5 (equivalent to spp; default: 4)
- <qp>
- Force quantization parameter (default: 0, use QP from video).
- <-15-32>
- Filter strength, lower values mean more details but also more artifacts, while higher values make the image smoother but also blurrier (default: 0 - PSNR optimal).
- <bframes>
- 0: do not use QP from B-frames (default)
- pp7[=qp[:mode]]
- Variant of the spp filter, similar to spp=6 with 7 point DCT where only the center sample is used after IDCT.
- <qp>
- Force quantization parameter (default: 0, use QP from video).
- <mode>
- 0: hard thresholding
- qp=equation
- quantization parameter (QP) change filter
- <equation>
- some equation like "2+2*sin(PI*qp)"
- geq=equation
- generic equation change filter
- <equation>
- Some equation, e.g. 'p(W-X\,Y)' to flip the image horizontally. You can use whitespace to make the equation more readable. There are a couple of constants that can be used in the equation:
PI: the number pi
E: the number e
X / Y: the coordinates of the current sample
W / H: width and height of the image
SW / SH: width/height scale depending on the currently filtered plane, e.g. 1,1
and 0.5,0.5 for YUV 4:2:0.
p(x,y): returns the value of the pixel at location x/y of the current
plane.
- test
- Generate various test patterns.
- rgbtest[=width:height]
- Generate an RGB test pattern useful for detecting RGB vs BGR issues. You should see a red, green and blue stripe from top to bottom.
- <width>
- Desired width of generated image (default: 0). 0 means
width of input image.
- <height>
- Desired height of generated image (default: 0). 0 means height of input image.
- lavc[=quality:fps]
- Fast software YV12 to MPEG-1 conversion with libavcodec for use with DVB/DXR3/IVTV/V4L2.
- <quality>
- 1-31: fixed qscale
- <fps>
- force output fps (float value) (default: 0, autodetect based on height)
- dvbscale[=aspect]
- Set up optimal scaling for DVB cards, scaling the x axis in hardware and calculating the y axis scaling in software to keep aspect. Only useful together with expand and scale.
- <aspect>
- Control aspect ratio, calculate as DVB_HEIGHT*ASPECTRATIO (default: 576*4/3=768), set it to 576*(16/9)=1024 for a 16:9 TV.
EXAMPLE:
- -vf dvbscale,scale=-1:0,expand=-1:576:-1:-1:1,lavc
- FIXME: Explain what this does.
- noise[=luma[u][t|a][h][p]:chroma[u][t|a][h][p]]
- Adds noise.
- <0-100>
- luma noise
- <0-100>
- chroma noise
- u
- uniform noise (gaussian otherwise)
- t
- temporal noise (noise pattern changes between frames)
- a
- averaged temporal noise (smoother, but a lot slower)
- h
- high quality (slightly better looking, slightly slower)
- p
- mix random noise with a (semi)regular pattern
- denoise3d[=luma_spatial:chroma_spatial:luma_tmp:chroma_tmp]
- This filter aims to reduce image noise producing smooth images and making still images really still (This should enhance compressibility.).
- <luma_spatial>
- spatial luma strength (default: 4)
- <chroma_spatial>
- spatial chroma strength (default: 3)
- <luma_tmp>
- luma temporal strength (default: 6)
- <chroma_tmp>
- chroma temporal strength (default: luma_tmp*chroma_spatial/luma_spatial)
- hqdn3d[=luma_spatial:chroma_spatial:luma_tmp:chroma_tmp]
- High precision/quality version of the denoise3d filter. Parameters and usage are the same.
- ow[=depth[:luma_strength[:chroma_strength]]]
- Overcomplete Wavelet denoiser.
- <depth>
- Larger depth values will denoise lower frequency components more, but slow down filtering (default: 8).
- <luma_strength>
- luma strength (default: 1.0)
- <chroma_strength>
- chroma strength (default: 1.0)
- eq[=brightness:contrast] (OBSOLETE)
- Software equalizer with interactive controls just like the hardware equalizer, for cards/drivers that do not support brightness and contrast controls in hardware.
- <-100-100>
- initial brightness
- <-100-100>
- initial contrast
- eq2[=gamma:contrast:brightness:saturation:rg:gg:bg:weight]
- Alternative software equalizer that uses lookup tables (very slow), allowing gamma correction in addition to simple brightness and contrast adjustment. Note that it uses the same MMX optimized code as -vf eq if all gamma values are 1.0. The parameters are given as floating point values.
- <0.1-10>
- initial gamma value (default: 1.0)
- <-2-2>
- initial contrast, where negative values result in a negative image (default: 1.0)
- <-1-1>
- initial brightness (default: 0.0)
- <0-3>
- initial saturation (default: 1.0)
- <0.1-10>
- gamma value for the red component (default: 1.0)
- <0.1-10>
- gamma value for the green component (default: 1.0)
- <0.1-10>
- gamma value for the blue component (default: 1.0)
- <0-1>
- The weight parameter can be used to reduce the effect of a high gamma value on bright image areas, e.g. keep them from getting overamplified and just plain white. A value of 0.0 turns the gamma correction all the way down while 1.0 leaves it at its full strength (default: 1.0).
- hue[=hue:saturation]
- Software equalizer with interactive controls just like the hardware equalizer, for cards/drivers that do not support hue and saturation controls in hardware.
- <-180-180>
- initial hue (default: 0.0)
- <-100-100>
- initial saturation, where negative values result in a negative chroma (default: 1.0)
- halfpack[=f]
- Convert planar YUV 4:2:0 to half-height packed 4:2:2, downsampling luma but keeping all chroma samples. Useful for output to low-resolution display devices when hardware downscaling is poor quality or is not available. Can also be used as a primitive luma-only deinterlacer with very low CPU usage.
- <f>
- By default, halfpack averages pairs of lines when downsampling. Any value different from 0 or 1 gives the default (averaging) behavior.
0: Only use even lines when downsampling.
1: Only use odd lines when downsampling.
- ilpack[=mode]
- When interlaced video is stored in YUV 4:2:0 formats, chroma interlacing does not line up properly due to vertical downsampling of the chroma channels. This filter packs the planar 4:2:0 data into YUY2 (4:2:2) format with the chroma lines in their proper locations, so that in any given scanline, the luma and chroma data both come from the same field.
- <mode>
- Select the sampling mode.
0: nearest-neighbor sampling, fast but
incorrect
1: linear interpolation (default)
- decimate[=max:hi:lo:frac]
- Drops frames that do not differ greatly from the previous frame in order to reduce framerate. The main use of this filter is for very-low-bitrate encoding (e.g. streaming over dialup modem), but it could in theory be used for fixing movies that were inverse-telecined incorrectly.
- <max>
- Sets the maximum number of consecutive frames which can be dropped (if positive), or the minimum interval between dropped frames (if negative).
- <hi>,<lo>,<frac>
- A frame is a candidate for dropping if no 8x8 region differs by more than a threshold of <hi>, and if not more than <frac> portion (1 meaning the whole image) differs by more than a threshold of <lo>. Values of <hi> and <lo> are for 8x8 pixel blocks and represent actual pixel value differences, so a threshold of 64 corresponds to 1 unit of difference for each pixel, or the same spread out differently over the block.
- dint[=sense:level]
- The drop-deinterlace (dint) filter detects and drops the first from a set of interlaced video frames.
- <0.0-1.0>
- relative difference between neighboring pixels (default: 0.1)
- <0.0-1.0>
- What part of the image has to be detected as interlaced to drop the frame (default: 0.15).
- lavcdeint (OBSOLETE)
- FFmpeg deinterlacing filter, same as -vf pp=fd
- kerndeint[=thresh[:map[:order[:sharp[:twoway]]]]]
- Donald Graft's adaptive kernel deinterlacer. Deinterlaces parts of a video if a configurable threshold is exceeded.
- <0-255>
- threshold (default: 10)
- <map>
0: Ignore pixels exceeding the threshold
(default).
1: Paint pixels exceeding the threshold white.
- <order>
0: Leave fields alone (default).
1: Swap fields.
- <sharp>
0: Disable additional sharpening (default).
1: Enable additional sharpening.
- <twoway>
0: Disable twoway sharpening (default).
1: Enable twoway sharpening.
- unsharp[=l|cWxH:amount[:l|cWxH:amount]]
- unsharp mask / gaussian blur
- l
- Apply effect on luma component.
- c
- Apply effect on chroma components.
- <width>x<height>
- width and height of the matrix, odd sized in both directions (min = 3x3, max = 13x11 or 11x13, usually something between 3x3 and 7x7)
- amount
- Relative amount of sharpness/blur to add to the image (a sane range should be -1.5-1.5).
<0: blur
>0: sharpen
- swapuv
- Swap U & V plane.
- il[=d|i][s][:[d|i][s]]
- (De)interleaves lines. The goal of this filter is to add the ability to process interlaced images pre-field without deinterlacing them. You can filter your interlaced DVD and play it on a TV without breaking the interlacing. While deinterlacing (with the postprocessing filter) removes interlacing permanently (by smoothing, averaging, etc) deinterleaving splits the frame into 2 fields (so called half pictures), so you can process (filter) them independently and then re-interleave them.
- d
- deinterleave (placing one above the other)
- i
- interleave
- s
- swap fields (exchange even & odd lines)
- fil[=i|d]
- (De)interleaves lines. This filter is very similar to the il filter but much faster, the main disadvantage is that it does not always work. Especially if combined with other filters it may produce randomly messed up images, so be happy if it works but do not complain if it does not for your combination of filters.
- d
- Deinterleave fields, placing them side by side.
- i
- Interleave fields again (reversing the effect of fil=d).
- field[=n]
- Extracts a single field from an interlaced image using stride arithmetic to avoid wasting CPU time. The optional argument n specifies whether to extract the even or the odd field (depending on whether n is even or odd).
- detc[=var1=value1:var2=value2:...]
- Attempts to reverse the 'telecine' process to recover a clean, non-interlaced stream at film framerate. This was the first and most primitive inverse telecine filter to be added to MPlayer. It works by latching onto the telecine 3:2 pattern and following it as long as possible. This makes it suitable for perfectly-telecined material, even in the presence of a fair degree of noise, but it will fail in the presence of complex post-telecine edits. Development on this filter is no longer taking place, as ivtc, pullup, and filmdint are better for most applications. The following arguments (see syntax above) may be used to control detc's behavior:
- <dr>
- Set the frame dropping mode.
0: Do not drop frames to maintain fixed output
framerate (default).
1: Always drop a frame when there have been no drops or telecine merges in the
past 5 frames.
2: Always maintain exact 5:4 input to output frame ratio.
- <am>
- Analysis mode.
0: Fixed pattern with initial frame number
specified by <fr>.
1: aggressive search for telecine pattern (default)
- <fr>
- Set initial frame number in sequence. 0-2 are the three clean progressive frames; 3 and 4 are the two interlaced frames. The default, -1, means 'not in telecine sequence'. The number specified here is the type for the imaginary previous frame before the movie starts.
- <t0>, <t1>, <t2>, <t3>
- Threshold values to be used in certain modes.
- ivtc[=1]
- Experimental 'stateless' inverse telecine filter. Rather than trying to lock on to a pattern like the detc filter does, ivtc makes its decisions independently for each frame. This will give much better results for material that has undergone heavy editing after telecine was applied, but as a result it is not as forgiving of noisy input, for example TV capture. The optional parameter (ivtc=1) corresponds to the dr=1 option for the detc filter, and should not be used with MPlayer. Further development on ivtc has stopped, as the pullup and filmdint filters appear to be much more accurate.
- pullup[=jl:jr:jt:jb:sb:mp]
- Third-generation pulldown reversal (inverse telecine) filter, capable of handling mixed hard-telecine, 24000/1001 fps progressive, and 30000/1001 fps progressive content. The pullup filter is designed to be much more robust than detc or ivtc, by taking advantage of future context in making its decisions. Like ivtc, pullup is stateless in the sense that it does not lock onto a pattern to follow, but it instead looks forward to the following fields in order to identify matches and rebuild progressive frames. It is still under development, but believed to be quite accurate.
- jl, jr, jt, and jb
- These options set the amount of "junk" to ignore
at the left, right, top, and bottom of the image, respectively. Left/right
are in units of 8 pixels, while top/bottom are in units of 2 lines. The
default is 8 pixels on each side.
- sb (strict breaks)
- Setting this option to 1 will reduce the chances of pullup
generating an occasional mismatched frame, but it may also cause an
excessive number of frames to be dropped during high motion sequences.
Conversely, setting it to -1 will make pullup match fields more easily.
This may help processing of video where there is slight blurring between
the fields, but may also cause there to be interlaced frames in the
output.
- mp (metric plane)
- This option may be set to 1 or 2 to use a chroma plane instead of the luma plane for doing pullup's computations. This may improve accuracy on very clean source material, but more likely will decrease accuracy, especially if there is chroma noise (rainbow effect) or any grayscale video. The main purpose of setting mp to a chroma plane is to reduce CPU load and make pullup usable in realtime on slow machines.
- filmdint[=options]
- Inverse telecine filter, similar to the pullup filter above. It is designed to handle any pulldown pattern, including mixed soft and hard telecine and limited support for movies that are slowed down or sped up from their original framerate for TV. Only the luma plane is used to find the frame breaks. If a field has no match, it is deinterlaced with simple linear approximation. If the source is MPEG-2, this must be the first filter to allow access to the field-flags set by the MPEG-2 decoder. Depending on the source MPEG, you may be fine ignoring this advice, as long as you do not see lots of "Bottom-first field" warnings. With no options it does normal inverse telecine. When this filter is used with MPlayer, it will result in an uneven framerate during playback, but it is still generally better than using pp=lb or no deinterlacing at all. Multiple options can be specified separated by /.
- crop=<w>:<h>:<x>:<y>
- Just like the crop filter, but faster, and works on mixed hard and soft telecined content as well as when y is not a multiple of 4. If x or y would require cropping fractional pixels from the chroma planes, the crop area is extended. This usually means that x and y must be even.
- io=<ifps>:<ofps>
- For each ifps input frames the filter will output ofps frames. This could be used to filter movies that are broadcast on TV at a frame rate different from their original framerate.
- luma_only=<n>
- If n is nonzero, the chroma plane is copied unchanged. This is useful for YV12 sampled TV, which discards one of the chroma fields.
- mmx2=<n>
- On x86, if n=1, use MMX2 optimized functions, if n=2, use 3DNow! optimized functions, otherwise, use plain C. If this option is not specified, MMX2 and 3DNow! are auto-detected, use this option to override auto-detection.
- fast=<n>
- The larger n will speed up the filter at the expense of accuracy. The default value is n=3. If n is odd, a frame immediately following a frame marked with the REPEAT_FIRST_FIELD MPEG flag is assumed to be progressive, thus filter will not spend any time on soft-telecined MPEG-2 content. This is the only effect of this flag if MMX2 or 3DNow! is available. Without MMX2 and 3DNow, if n=0 or 1, the same calculations will be used as with n=2 or 3. If n=2 or 3, the number of luma levels used to find the frame breaks is reduced from 256 to 128, which results in a faster filter without losing much accuracy. If n=4 or 5, a faster, but much less accurate metric will be used to find the frame breaks, which is more likely to misdetect high vertical detail as interlaced content.
- verbose=<n>
- If n is nonzero, print the detailed metrics for each frame. Useful for debugging.
- dint_thres=<n>
- Deinterlace threshold. Used during de-interlacing of unmatched frames. Larger value means less deinterlacing, use n=256 to completely turn off deinterlacing. Default is n=8.
- comb_thres=<n>
- Threshold for comparing a top and bottom fields. Defaults to 128.
- diff_thres=<n>
- Threshold to detect temporal change of a field. Default is 128.
- sad_thres=<n>
- Sum of Absolute Difference threshold, default is 64.
- divtc[=options]
- Inverse telecine for deinterlaced video. If 3:2-pulldown telecined video has lost one of the fields or is deinterlaced using a method that keeps one field and interpolates the other, the result is a juddering video that has every fourth frame duplicated. This filter is intended to find and drop those duplicates and restore the original film framerate. Two different modes are available: One pass mode is the default and is straightforward to use, but has the disadvantage that any changes in the telecine phase (lost frames or bad edits) cause momentary judder until the filter can resync again. Two pass mode avoids this by analyzing the whole video beforehand so it will have forward knowledge about the phase changes and can resync at the exact spot. These passes do not correspond to pass one and two of the encoding process. You must run an extra pass using divtc pass one before the actual encoding throwing the resulting video away. Use -nosound -ovc raw -o /dev/null to avoid wasting CPU power for this pass. You may add something like crop=2:2:0:0 after divtc to speed things up even more. Then use divtc pass two for the actual encoding. If you use multiple encoder passes, use divtc pass two for all of them. The options are:
- pass=1|2
- Use two pass mode.
- file=<filename>
- Set the two pass log filename (default: "framediff.log").
- threshold=<value>
- Set the minimum strength the telecine pattern must have for the filter to believe in it (default: 0.5). This is used to avoid recognizing false pattern from the parts of the video that are very dark or very still.
- window=<numframes>
- Set the number of past frames to look at when searching for pattern (default: 30). Longer window improves the reliability of the pattern search, but shorter window improves the reaction time to the changes in the telecine phase. This only affects the one pass mode. The two pass mode currently uses fixed window that extends to both future and past.
- phase=0|1|2|3|4
- Sets the initial telecine phase for one pass mode (default: 0). The two pass mode can see the future, so it is able to use the correct phase from the beginning, but one pass mode can only guess. It catches the correct phase when it finds it, but this option can be used to fix the possible juddering at the beginning. The first pass of the two pass mode also uses this, so if you save the output from the first pass, you get constant phase result.
- deghost=<value>
- Set the deghosting threshold (0-255 for one pass mode, -255-255 for two pass mode, default 0). If nonzero, deghosting mode is used. This is for video that has been deinterlaced by blending the fields together instead of dropping one of the fields. Deghosting amplifies any compression artifacts in the blended frames, so the parameter value is used as a threshold to exclude those pixels from deghosting that differ from the previous frame less than specified value. If two pass mode is used, then negative value can be used to make the filter analyze the whole video in the beginning of pass-2 to determine whether it needs deghosting or not and then select either zero or the absolute value of the parameter. Specify this option for pass-2, it makes no difference on pass-1.
- phase[=t|b|p|a|u|T|B|A|U][:v]
- Delay interlaced video by one field time so that the field order changes. The intended use is to fix PAL movies that have been captured with the opposite field order to the film-to-video transfer. The options are:
- t
- Capture field order top-first, transfer bottom-first. Filter will delay the bottom field.
- b
- Capture bottom-first, transfer top-first. Filter will delay the top field.
- p
- Capture and transfer with the same field order. This mode only exists for the documentation of the other options to refer to, but if you actually select it, the filter will faithfully do nothing ;-)
- a
- Capture field order determined automatically by field flags, transfer opposite. Filter selects among t and b modes on a frame by frame basis using field flags. If no field information is available, then this works just like u.
- u
- Capture unknown or varying, transfer opposite. Filter selects among t and b on a frame by frame basis by analyzing the images and selecting the alternative that produces best match between the fields.
- T
- Capture top-first, transfer unknown or varying. Filter selects among t and p using image analysis.
- B
- Capture bottom-first, transfer unknown or varying. Filter selects among b and p using image analysis.
- A
- Capture determined by field flags, transfer unknown or varying. Filter selects among t, b and p using field flags and image analysis. If no field information is available, then this works just like U. This is the default mode.
- U
- Both capture and transfer unknown or varying. Filter selects among t, b and p using image analysis only.
- v
- Verbose operation. Prints the selected mode for each frame and the average squared difference between fields for t, b, and p alternatives.
- telecine[=start]
- Apply 3:2 'telecine' process to increase framerate by 20%. This most likely will not work correctly with MPlayer. The optional start parameter tells the filter where in the telecine pattern to start (0-3).
- tinterlace[=mode]
- Temporal field interlacing - merge pairs of frames into an interlaced frame, halving the framerate. Even frames are moved into the upper field, odd frames to the lower field. This can be used to fully reverse the effect of the tfields filter (in mode 0). Available modes are:
- 0
- Move odd frames into the upper field, even into the lower field, generating a full-height frame at half framerate.
- 1
- Only output odd frames, even frames are dropped; height unchanged.
- 2
- Only output even frames, odd frames are dropped; height unchanged.
- 3
- Expand each frame to full height, but pad alternate lines with black; framerate unchanged.
- 4
- Interleave even lines from even frames with odd lines from odd frames. Height unchanged at half framerate.
- tfields[=mode[:field_dominance]]
- Temporal field separation - split fields into frames, doubling the output framerate.
- <mode>
- 0: Leave fields unchanged (will jump/flicker).
- <field_dominance> (DEPRECATED)
- -1: auto (default) Only works if the decoder exports the
appropriate information and no other filters which discard that
information come before tfields in the filter chain, otherwise it falls
back to 0 (top field first).
- yadif=[mode[:field_dominance]]
- Yet another deinterlacing filter
- <mode>
- 0: Output 1 frame for each frame.
- <field_dominance> (DEPRECATED)
- Operates like tfields.
- mcdeint=[mode[:parity[:qp]]]
- Motion compensating deinterlacer. It needs one field per frame as input and must thus be used together with tfields=1 or yadif=1/3 or equivalent.
- <mode>
- 0: fast
- <parity>
- 0 or 1 selects which field to use (note: no autodetection yet!).
- <qp>
- Higher values should result in a smoother motion vector field but less optimal individual vectors.
- boxblur=radius:power[:radius:power]
- box blur
- <radius>
- blur filter strength
- <power>
- number of filter applications
- sab=radius:pf:colorDiff[:radius:pf:colorDiff]
- shape adaptive blur
- <radius>
- blur filter strength (~0.1-4.0) (slower if larger)
- <pf>
- prefilter strength (~0.1-2.0)
- <colorDiff>
- maximum difference between pixels to still be considered (~0.1-100.0)
- smartblur=radius:strength:threshold[:radius:strength:threshold]
- smart blur
- <radius>
- blur filter strength (~0.1-5.0) (slower if larger)
- <strength>
- blur (0.0-1.0) or sharpen (-1.0-0.0)
- <threshold>
- filter all (0), filter flat areas (0-30) or filter edges (-30-0)
- perspective=x0:y0:x1:y1:x2:y2:x3:y3:t
- Correct the perspective of movies not filmed perpendicular to the screen.
- <x0>,<y0>,...
- coordinates of the top left, top right, bottom left, bottom right corners
- <t>
- linear (0) or cubic resampling (1)
- 2xsai
- Scale and smooth the image with the 2x scale and interpolate algorithm.
- 1bpp
- 1bpp bitmap to YUV/BGR 8/15/16/32 conversion
- down3dright[=lines]
- Reposition and resize stereoscopic images. Extracts both stereo fields and places them side by side, resizing them to maintain the original movie aspect.
- <lines>
- number of lines to select from the middle of the image (default: 12)
- bmovl=hidden:opaque:fifo
- The bitmap overlay filter reads bitmaps from a FIFO and displays them on top of the movie, allowing some transformations on the image. Also see TOOLS/bmovl-test.c for a small bmovl test program.
- <hidden>
- Set the default value of the 'hidden' flag (0=visible, 1=hidden).
- <opaque>
- Set the default value of the 'opaque' flag (0=transparent, 1=opaque).
- <fifo>
- path/filename for the FIFO (named pipe connecting 'mplayer -vf bmovl' to the controlling application)
FIFO commands are:
- RGBA32 width height xpos ypos alpha clear
- followed by width*height*4 Bytes of raw RGBA32 data.
- ABGR32 width height xpos ypos alpha clear
- followed by width*height*4 Bytes of raw ABGR32 data.
- RGB24 width height xpos ypos alpha clear
- followed by width*height*3 Bytes of raw RGB24 data.
- BGR24 width height xpos ypos alpha clear
- followed by width*height*3 Bytes of raw BGR24 data.
- ALPHA width height xpos ypos alpha
- Change alpha transparency of the specified area.
- CLEAR width height xpos ypos
- Clear area.
- OPAQUE
- Disable all alpha transparency. Send "ALPHA 0 0 0 0 0" to enable it again.
- HIDE
- Hide bitmap.
- SHOW
- Show bitmap.
Arguments are:
- <width>, <height>
- image/area size
- <xpos>, <ypos>
- Start blitting at position x/y.
- <alpha>
- Set alpha difference. If you set this to -255 you can then send a sequence of ALPHA-commands to set the area to -225, -200, -175 etc for a nice fade-in-effect! ;)
0: same as original
255: Make everything opaque.
-255: Make everything transparent.
- <clear>
- Clear the framebuffer before blitting.
0: The image will just be blitted on top of
the old one, so you do not need to send 1.8MB of RGBA32 data every time a
small part of the screen is updated.
1: clear
- framestep=I|[i]step
- Renders only every nth frame or every intra frame
(keyframe).
- tile=xtiles:ytiles:output:start:delta
- Tile a series of images into a single, bigger image. If you
omit a parameter or use a value less than 0, then the default value is
used. You can also stop when you are satisfied (... -vf tile=10:5 ...). It
is probably a good idea to put the scale filter before the tile :-)
- <xtiles>
- number of tiles on the x axis (default: 5)
- <ytiles>
- number of tiles on the y axis (default: 5)
- <output>
- Render the tile when 'output' number of frames are reached, where 'output' should be a number less than xtile * ytile. Missing tiles are left blank. You could, for example, write an 8 * 7 tile every 50 frames to have one image every 2 seconds @ 25 fps.
- <start>
- outer border thickness in pixels (default: 2)
- <delta>
- inner border thickness in pixels (default: 4)
- delogo[=x:y:w:h:t]
- Suppresses a TV station logo by a simple interpolation of the surrounding pixels. Just set a rectangle covering the logo and watch it disappear (and sometimes something even uglier appear - your mileage may vary).
- <x>,<y>
- top left corner of the logo
- <w>,<h>
- width and height of the cleared rectangle
- <t>
- Thickness of the fuzzy edge of the rectangle (added to w and h). When set to -1, a green rectangle is drawn on the screen to simplify finding the right x,y,w,h parameters.
- file=<file>
- You can specify a text file to load the coordinates from. Each line must have a timestamp (in seconds, and in ascending order) and the "x:y:w:h:t" coordinates (t can be omitted).
- remove-logo=/path/to/logo_bitmap_file_name.pgm
- Suppresses a TV station logo, using a PGM or PPM image file to determine which pixels comprise the logo. The width and height of the image file must match those of the video stream being processed. Uses the filter image and a circular blur algorithm to remove the logo.
- /path/to/logo_bitmap_file_name.pgm
- [path] + filename of the filter image.
- screenshot
- Allows acquiring screenshots of the movie using slave mode commands that can be bound to keypresses. See the slave mode documentation and the INTERACTIVE CONTROL section for details. Files named 'shotNNNN.png' will be saved in the working directory, using the first available number - no files will be overwritten. The filter has no overhead when not used and accepts an arbitrary colorspace, so it is safe to add it to the configuration file. Make sure that the screenshot filter is added after all other filters whose effect you want to record on the saved image. E.g. it should be the last filter if you want to have an exact screenshot of what you see on the monitor.
- ass
- Moves SSA/ASS subtitle rendering to an arbitrary point in
the filter chain. Only useful with the -ass option.
- -vf ass,screenshot
- Moves SSA/ASS rendering before the screenshot filter. Screenshots taken this way will contain subtitles.
- blackframe[=amount:threshold]
- Detect frames that are (almost) completely black. Can be useful to detect chapter transitions or commercials. Output lines consist of the frame number of the detected frame, the percentage of blackness, the frame type and the frame number of the last encountered keyframe.
- <amount>
- Percentage of the pixels that have to be below the threshold (default: 98).
- <threshold>
- Threshold below which a pixel value is considered black (default: 32).
- stereo3d[=in:out]
- Stereo3d converts between different stereoscopic image formats.
- <in>
- Stereoscopic image format of input. Possible values:
sbsl or side_by_side_left_first
side by side parallel (left eye left, right
eye right)
sbsr or side_by_side_right_first
side by side crosseye (right eye left, left
eye right)
abl or above_below_left_first
above-below (left eye above, right eye
below)
abl or above_below_right_first
above-below (right eye above, left eye
below)
ab2l or above_below_half_height_left_first
above-below with half height resolution (left
eye above, right eye below)
ab2r or above_below_half_height_right_first
above-below with half height resolution (right
eye above, left eye below)
- <out>
- Stereoscopic image format of output. Possible values are all the input formats as well as:
arcg or anaglyph_red_cyan_gray
NOTE: To use either of the interleaved-rows output formats to display
full-screen on a row-interleaved 3D display, you will need to scale the video
to the correct height first using the "scale" filter, if it is not
already the right height. Typically, that is 1080 rows (so use e.g. "-vf
scale=1440:1080,stereo3d=sbsl:irl" for a 720p side-by-side encoded
movie).anaglyph red/cyan gray (red filter on left
eye, cyan filter on right eye)
arch or anaglyph_red_cyan_half_color
anaglyph red/cyan half colored (red filter on
left eye, cyan filter on right eye)
arcc or anaglyph_red_cyan_color
anaglyph red/cyan color (red filter on left
eye, cyan filter on right eye)
arcd or anaglyph_red_cyan_dubois
anaglyph red/cyan color optimized with the
least squares projection of dubois (red filter on left eye, cyan filter on
right eye)
agmg or anaglyph_green_magenta_gray
anaglyph green/magenta gray (green filter on
left eye, magenta filter on right eye)
agmh or anaglyph_green_magenta_half_color
anaglyph green/magenta half colored (green
filter on left eye, magenta filter on right eye)
agmc or anaglyph_green_magenta_color
anaglyph green/magenta colored (green filter
on left eye, magenta filter on right eye)
aybg or anaglyph_yellow_blue_gray
anaglyph yellow/blue gray (yellow filter on
left eye, blue filter on right eye)
aybh or anaglyph_yellow_blue_half_color
anaglyph yellow/blue half colored (yellow
filter on left eye, blue filter on right eye)
aybc or anaglyph_yellow_blue_color
anaglyph yellow/blue colored (yellow filter on
left eye, blue filter on right eye)
irl or interleave_rows_left_first
Interleaved rows (left eye has top row, right
eye starts on next row)
irr or interleave_rows_right_first
Interleaved rows (right eye has top row, left
eye starts on next row)
ml or mono_left
mono output (left eye only)
mr or mono_right
mono output (right eye only)
- gradfun[=strength[:radius]]
- Fix the banding artifacts that are sometimes introduced
into nearly flat regions by truncation to 8bit colordepth. Interpolates
the gradients that should go where the bands are, and dithers them.
- <strength>
- Maximum amount by which the filter will change any one pixel. Also the threshold for detecting nearly flat regions (default: 1.2).
- <radius>
- Neighborhood to fit the gradient to. Larger radius makes for smoother gradients, but also prevents the filter from modifying pixels near detailed regions (default: 16).
- fixpts[=options]
- Fixes the presentation timestamps (PTS) of the frames. By default, the PTS passed to the next filter is dropped, but the following options can change that:
- Print the incoming PTS.
- fps=<fps>
- Specify a frame per second value.
- start=<pts>
- Specify an initial value for the PTS.
- autostart=<n>
- Uses the nth incoming PTS as the initial PTS. All previous PTS are kept, so setting a huge value or -1 keeps the PTS intact.
- autofps=<n>
- Uses the nth incoming PTS after the end of autostart to determine the framerate.
EXAMPLE:
- -vf fixpts=fps=24000/1001,ass,fixpts
- Generates a new sequence of PTS, uses it for ASS subtitles, then drops it. Generating a new sequence is useful when the timestamps are reset during the program; this is frequent on DVDs. Dropping it may be necessary to avoid confusing encoders.
NOTE: Using this filter together with
any sort of seeking (including -ss and EDLs) may make demons fly out of your
nose.
ENVIRONMENT VARIABLES¶
There are a number of environment variables that can be used to control the behavior of MPlayer.- MPLAYER_CHARSET (also see -msgcharset)
- Convert console messages to the specified charset (default: autodetect). A value of "noconv" means no conversion.
- MPLAYER_HOME
- Directory where MPlayer looks for user settings.
- MPLAYER_LOCALEDIR
- Directory where MPlayer looks for gettext translation files (if enabled).
- MPLAYER_VERBOSE (also see -v and -msglevel)
- Set the initial verbosity level across all message modules (default: 0). The resulting verbosity corresponds to that of -msglevel 5 plus the value of MPLAYER_VERBOSE.
libaf:¶
- LADSPA_PATH
- If LADSPA_PATH is set, it searches for the specified file. If it is not set, you must supply a fully specified pathname. FIXME: This is also mentioned in the ladspa section.
libdvdcss:¶
- DVDCSS_CACHE
- Specify a directory in which to store title key values. This will speed up descrambling of DVDs which are in the cache. The DVDCSS_CACHE directory is created if it does not exist, and a subdirectory is created named after the DVD's title or manufacturing date. If DVDCSS_CACHE is not set or is empty, libdvdcss will use the default value which is "${HOME}/.dvdcss/" under Unix and "C:\Documents and Settings\$USER\Application Data\dvdcss\" under Win32. The special value "off" disables caching.
- DVDCSS_METHOD
- Sets the authentication and decryption method that libdvdcss will use to read scrambled discs. Can be one of title, key or disc.
- key
- is the default method. libdvdcss will use a set of calculated player keys to try and get the disc key. This can fail if the drive does not recognize any of the player keys.
- disc
- is a fallback method when key has failed. Instead of using player keys, libdvdcss will crack the disc key using a brute force algorithm. This process is CPU intensive and requires 64 MB of memory to store temporary data.
- title
- is the fallback when all other methods have failed. It does not rely on a key exchange with the DVD drive, but rather uses a crypto attack to guess the title key. On rare cases this may fail because there is not enough encrypted data on the disc to perform a statistical attack, but in the other hand it is the only way to decrypt a DVD stored on a hard disc, or a DVD with the wrong region on an RPC2 drive.
- DVDCSS_RAW_DEVICE
- Specify the raw device to use. Exact usage will depend on your operating system, the Linux utility to set up raw devices is raw(8) for instance. Please note that on most operating systems, using a raw device requires highly aligned buffers: Linux requires a 2048 bytes alignment (which is the size of a DVD sector).
- DVDCSS_VERBOSE
- Sets the libdvdcss verbosity level.
- 0
- Outputs no messages at all.
- 1
- Outputs error messages to stderr.
- 2
- Outputs error messages and debug messages to stderr.
- DVDREAD_NOKEYS
- Skip retrieving all keys on startup. Currently disabled.
- HOME
- FIXME: Document this.
libao2:¶
- AO_SUN_DISABLE_SAMPLE_TIMING
- FIXME: Document this.
- AUDIODEV
- FIXME: Document this.
- AUDIOSERVER
- Specifies the Network Audio System server to which the nas
audio output driver should connect and the transport that should be used.
If unset DISPLAY is used instead. The transport can be one of tcp and
unix. Syntax is tcp/<somehost>:<someport>,
<somehost>:<instancenumber> or [unix]:<instancenumber>.
The NAS base port is 8000 and <instancenumber> is added to that.
EXAMPLES:
- AUDIOSERVER=somehost:0
- Connect to NAS server on somehost using default port and transport.
- AUDIOSERVER=tcp/somehost:8000
- Connect to NAS server on somehost listening on TCP port 8000.
- AUDIOSERVER=(unix)?:0
- Connect to NAS server instance 0 on localhost using unix domain sockets.
- DISPLAY
- FIXME: Document this.
osdep:¶
- TERM
- FIXME: Document this.
libvo:¶
- DISPLAY
- FIXME: Document this.
- FRAMEBUFFER
- FIXME: Document this.
- HOME
- FIXME: Document this.
libmpdemux:¶
- HOME
- FIXME: Document this.
- HOMEPATH
- FIXME: Document this.
- http_proxy
- FIXME: Document this.
- LOGNAME
- FIXME: Document this.
- USERPROFILE
- FIXME: Document this.
GUI:¶
- CHARSET
- FIXME: Document this.
- DISPLAY
- FIXME: Document this.
- HOME
- FIXME: Document this.
libavformat:¶
- AUDIO_FLIP_LEFT
- FIXME: Document this.
- BKTR_DEV
- FIXME: Document this.
- BKTR_FORMAT
- FIXME: Document this.
- BKTR_FREQUENCY
- FIXME: Document this.
- http_proxy
- FIXME: Document this.
- no_proxy
- FIXME: Document this.
FILES¶
- /usr/local/etc/mplayer/mplayer.conf
- MPlayer system-wide settings
- ~/.mplayer/config
- MPlayer user settings
- ~/.mplayer/input.conf
- input bindings (see '-input keylist' for the full list)
- ~/.mplayer/font/
- font directory (There must be a font.desc file and files with .RAW extension.)
- ~/.mplayer/DVDkeys/
- cached CSS keys
EXAMPLES OF MPLAYER USAGE¶
Quickstart Blu-ray playing:mplayer br:////path/to/disc mplayer br:// -bluray-device /path/to/discQuickstart DVD playing:
mplayer dvd://1Play in Japanese with English subtitles:
mplayer dvd://1 -alang ja -slang enPlay only chapters 5, 6, 7:
mplayer dvd://1 -chapter 5-7Play only titles 5, 6, 7:
mplayer dvd://5-7Play a multiangle DVD:
mplayer dvd://1 -dvdangle 2Play from a different DVD device:
mplayer dvd://1 -dvd-device /dev/dvd2Play DVD video from a directory with VOB files:
mplayer dvd://1 -dvd-device /path/to/directory/Copy a DVD title to hard disk, saving to file title1.vob :
mplayer dvd://1 -dumpstream -dumpfile title1.vobPlay a DVD with dvdnav from path /dev/sr1:
mplayer dvdnav:////dev/sr1Stream from HTTP:
mplayer http://mplayer.hq/example.aviStream using RTSP:
mplayer rtsp://server.example.com/streamNameConvert subtitles to MPsub format:
mplayer dummy.avi -sub source.sub -dumpmpsubConvert subtitles to MPsub format without watching the movie:
mplayer /dev/zero -rawvideo pal:fps=xx -demuxer rawvideo -vc null -vo null -noframedrop -benchmark -sub source.sub -dumpmpsubinput from standard V4L:
mplayer tv:// -tv driver=v4l:width=640:height=480:outfmt=i420 -vc rawi420 -vo xvPlay DTS-CD with passthrough:
mplayer -ac hwdts -rawaudio format=0x2001 -cdrom-device /dev/cdrom cdda://
mplayer -rawaudio format=0xff -demuxer rawaudio -af pan=2:.32:.32:.39:.06:.06:.39:.17:-.17:-.17:.17:.33:.33 adts_he-aac160_51.aac
mplayer -vf geq='128+(p(X\,Y)-128)*(0.5-gt(mod(X/SW\,128)\,64))*(0.5-gt(mod(Y/SH\,128)\,64))*4'
AUTHORS¶
MPlayer was initially written by Arpad Gereoffy. See the AUTHORS file for a list of some of the many other contributors. MPlayer is (C) 2000-2011 The MPlayer Team This man page was written mainly by Gabucino, Jonas Jermann and Diego Biurrun.2009-03-25 | The MPlayer Project |