NAME¶
ext2sim - convert hierarchical
ext(5) extracted-circuit files to flat
sim(5) files
SYNOPSIS¶
ext2sim [
-a aliasfile ] [
-l labelsfile ] [
-o simfile ] [
-A ] [
-B ] [
-F ] [
-L ] [
-t ] [
extcheck-options ] [
-y num ] [
-f mit|lbl|su ] [
-J hier|flat ] [
-j
device:sdRclass[/subRclass]/defaultSubstrate ]
root
DESCRIPTION¶
Ext2sim will convert an extracted circuit from the hierarchical
ext(5)
representation produced by Magic to the flat
sim(5) representation
required by many simulation tools. The root of the tree to be extracted is the
file
root.ext; it and all the files it references are
recursively flattened. The result is a single, flat representation of the
circuit that is written to the file
root.sim, a list of node
aliases written to the file
root.al, and a list of the locations
of all nodenames in CIF format, suitable for plotting, to the file
root.nodes. The file
root.sim is suitable for use
with programs such as
crystal(1),
esim(1), or
sim2spice(1).
The following options are recognized:
- -a aliasfile
- Instead of leaving node aliases in the file
root.al, leave it in aliasfile.
- -l labelfile
- Instead of leaving a CIF file with the locations of all
node names in the file root.nodes, leave it in
labelfile.
- -o outfile
- Instead of leaving output in the file
root.sim, leave it in outfile.
- -A
- Don't produce the aliases file.
- -B
- Don't output transistor or node attributes in the
.sim file. This option will also disable the output of information
such as the area and perimeter of source and drain diffusion and the fet
substrate. For compatibitlity reasons the latest version of ext2sim
outputs this information as node attibutes. This option is necessary when
preparing input for programs that don't know about attributes, such as
sim2spice(1) (which is actually made obsolete by
ext2spice(1), anyway), or rsim(1).
- -F
- Don't output nodes that aren't connected to fets (floating
nodes).
- -L
- Don't produce the label file.
- -tchar
- Trim characters from node names when writing the output
file. Char should be either "#" or "!". The
option may be used twice if both characters are desired.
- -f MIT|LBL|SU
- Select the output format. MIT is the traditional
sim(5) format. LBL is a variant of it understood by
gemini(1) which includes the substrate connection as a fourth
terminal before length and width. SU is the internal Stanford format which
is described also in sim(5) and includes areas and perimeters of
fet sources, drains and substrates.
- -y num
- Select the precision for outputing capacitors. The default
is 1 which means that the capacitors will be printed to a precision of .1
fF.
- -J hier|flat
- Select the source/drain area and perimeter extraction
algorithm. If hier is selected then the areas and perimeters are
extracted only within each subcell. For each fet in a subcell the
area and perimeter of its source and drain within this subcell are output.
If two or more fets share a source/drain node then the total area and
perimeter will be output in only one of them and the other will have 0. If
flat is selected the same rules apply only that the scope of search
for area and perimeter is the whole netlist. In general flat (which
is the default) will give accurate results (it will take into account
shared sources/drains) but hier is provided for backwards compatibility
with version 6.4.5. On top of this selection you can individually control
how a terminal of a specific fet will be extracted if you put a
source/drain attribute. ext:aph makes the extraction for that
specific terminal hierarchical and ext:apf makes the extraction
flat (see the magic tutorial about attaching attribute labels).
Additionaly to ease extraction of bipolar transistors the gate attribute
ext:aps forces the output of the substrate area and perimeter for a
specific fet (in flat mode only).
- -j
device:sdRclass[/subRclass]/defaultSubstrate
- Gives ext2sim information about the source/drain resistance
class of the fet type device. Makes device to have
sdRclass source drain resistance class, subRclass substrate
(well) resistance class and the node named defaultSubstrate as its
default substrate. The defaults are nfet:0/Gnd! and pfet:1/6/Vdd! which
correspond to the MOSIS technology file but things might vary in your
site. Ask your local cad administrator.
The way the extraction of node area and perimeter works in magic the total area
and perimeter of the source/drain junction is summed up on a single node. That
is why all the junction areas and perimeters are summed up on a single node
(this should not affect simulation results however).
Special care must be taken when the substrate of a fet is tied to a
node other than the default substrate (eg in a bootstraping charge
pump). To get the correct substrate info in these cases the fet(s) with
separate wells should be in their own separate subcell with ext:aph attributes
attached to their sensitive terminals (also all the transistors which share
sensistive terminals with these should be in another subcell with the same
attributes).
In addition, all of the options of
extcheck(1) are accepted.
SCALING AND UNITS¶
If all of the
.ext files in the tree read by
ext2sim have the same
geometrical scale (specified in the
scale line in each
.ext
file), this scale is reflected through to the output, resulting in
substantially smaller
.sim files. Otherwise, the geometrical unit in
the output
.sim file is a centimicron.
Resistance and capacitance are always output in ohms and femptofarads,
respectively.
SEE ALSO¶
extcheck(1), ext2dlys(1),
ext2spice(1),
magic(1), rsim(1),
ext(5),
sim(5)
AUTHOR¶
Walter Scott additions/fixes by Stefanos Sidiropoulos.
BUGS¶
Transistor gate capacitance is typically not included in node capacitances, as
most analysis tools compute the gate capacitance directly from the gate area.
The
-c flag therefore provides a limit only on non-gate capacitance.
The areas and perimeters of fet sources and drains work only with the simple
extraction algorith and not with the extresis flow. So you have to model them
as linear capacitors (create a special extraction style) if you want to
extract parasitic resistances with extresis.