table of contents
other versions
- wheezy 0.9.0~pre1-1
- jessie 0.9.0~pre1-1.2
- testing 0.9.4c-9
- unstable 0.9.4c-9
- experimental 0.10.0~rc2-3
MODE2(1) | User Commands | MODE2(1) |
NAME¶
mode2, smode2, xmode2 - shows the pulse/space length of infrared signalsSYNOPSIS¶
xmode2 [ options]DESCRIPTION¶
The main purpose of these programs is to check operation of your home-brew LIRC receiver hardware and to see the IR waveform of the remote controller without an expensive oscilloscope. Very useful for debugging. Of course this program won't work with hardware that decodes the signals itself like e.g. TV cards or the Irman.- -h --help
- display usage summary
- -v --version
- display version
- -d --device=device
- read from given device
- -H --driver=driver
- use given driver
-g
--geometry= geometry window geometry
- -t --timediv=value
- ms per unit
- -m --mode
- enable alternative display mode
- -r --raw
- access device directly
SEE ALSO¶
mode2(1), smode2(1), xmode2(1)October 2010 | mode2 0.9.0-pre1 |