other versions
- wheezy 3.2.78-1
ENUM IEEE80211_CONF_(9) | The basic mac80211 driver inte | ENUM IEEE80211_CONF_(9) |
NAME¶
enum_ieee80211_conf_flags - configuration flagsSYNOPSIS¶
enum ieee80211_conf_flags { IEEE80211_CONF_MONITOR, IEEE80211_CONF_PS, IEEE80211_CONF_IDLE, IEEE80211_CONF_OFFCHANNEL };
CONSTANTS¶
IEEE80211_CONF_MONITORthere's a monitor interface present -- use
this to determine for example whether to calculate timestamps for packets or
not, do not use instead of filter flags!
IEEE80211_CONF_PS
Enable 802.11 power save mode (managed mode
only). This is the power save mode defined by IEEE 802.11-2007 section 11.2,
meaning that the hardware still wakes up for beacons, is able to transmit
frames and receive the possible acknowledgment frames. Not to be confused with
hardware specific wakeup/sleep states, driver is responsible for that. See the
section “Powersave support” for more.
IEEE80211_CONF_IDLE
The device is running, but idle; if the flag
is set the driver should be prepared to handle configuration requests but may
turn the device off as much as possible. Typically, this flag will be set when
an interface is set UP but not associated or scanning, but it can also be
unset in that case when monitor interfaces are active.
IEEE80211_CONF_OFFCHANNEL
The device is currently not on its main
operating channel.
DESCRIPTION¶
Flags to define PHY configuration optionsAUTHOR¶
Johannes Berg <johannes@sipsolutions.net>Author.
COPYRIGHT¶
March 2016 | Kernel Hackers Manual 3.2. |