conflicting packages
QwtPicker(3) | Qwt User's Guide | QwtPicker(3) |
NAME¶
QwtPicker - QwtPicker provides selections on a widget.SYNOPSIS¶
#include <qwt_picker.h> Inherits QwtEventPattern. Inherited by QwtPlotPicker.Public Types¶
enum RubberBand { NoRubberBand = 0, HLineRubberBand, VLineRubberBand, CrossRubberBand, RectRubberBand, EllipseRubberBand, PolygonRubberBand, UserRubberBand = 100 }
Public Slots¶
void setEnabled (bool)
Signals¶
void activated (bool on)
Public Member Functions¶
QwtPicker (QWidget *parent)
Protected Member Functions¶
virtual QPolygon adjustedPoints (const QPolygon &) const
Detailed Description¶
QwtPicker provides selections on a widget.- •
- Nothing
QwtPickerTrackerMachine
- •
- Single points
QwtPickerClickPointMachine, QwtPickerDragPointMachine
- •
- Rectangles
QwtPickerClickRectMachine, QwtPickerDragRectMachine
- •
- Polygons
QwtPickerPolygonMachine
#include <qwt_picker.h> #include <qwt_picker_machine.h> QwtPicker *picker = new QwtPicker(widget); picker->setStateMachine(new QwtPickerDragRectMachine); picker->setTrackerMode(QwtPicker::ActiveOnly); picker->setRubberBand(QwtPicker::RectRubberBand);
- •
- begin()
Activate/Initialize the selection.
- •
- append()
Add a new point
- •
- move()
Change the position of the last point.
- •
- remove()
Remove the last point.
- •
- end()
Terminate the selection and call accept to validate the picked points.
In case of QWidget::NoFocus the focus policy
of the observed widget is set to QWidget::WheelFocus and mouse tracking will
be manipulated while the picker is active, or if trackerMode() is
AlwayOn.
Member Enumeration Documentation¶
enum QwtPicker::DisplayMode¶
Display mode. See also:setTrackerMode(), trackerMode(),
isActive()
- AlwaysOff
- Display never.
- AlwaysOn
- Display always.
- ActiveOnly
- Display only when the selection is active.
enum QwtPicker::ResizeMode Controls what to do with the selected points of an active selection when the observed widget is resized.¶
The default value is QwtPicker::Stretch. See also:setResizeMode()
- Stretch
- All points are scaled according to the new size,.
- KeepSize
- All points remain unchanged.
enum QwtPicker::RubberBand Rubberband style¶
The default value is QwtPicker::NoRubberBand. See also:setRubberBand(),
rubberBand()
- NoRubberBand
- No rubberband.
- HLineRubberBand
- A horizontal line ( only for QwtPicker::PointSelection )
- VLineRubberBand
- A vertical line ( only for QwtPicker::PointSelection )
- CrossRubberBand
- A crosshair ( only for QwtPicker::PointSelection )
- RectRubberBand
- A rectangle ( only for QwtPicker::RectSelection )
- EllipseRubberBand
- An ellipse ( only for QwtPicker::RectSelection )
- PolygonRubberBand
- A polygon ( only for QwtPicker::&PolygonSelection )
- UserRubberBand
- Values >= UserRubberBand can be used to define additional rubber bands.
Constructor & Destructor Documentation¶
QwtPicker::QwtPicker (QWidget *parent) [explicit] Constructor¶
Creates an picker that is enabled, but without a state machine. rubberband and tracker are disabled. Parameters:parent Parent widget, that will be
observed
QwtPicker::QwtPicker (RubberBandrubberBand, DisplayModetrackerMode, QWidget *parent) [explicit] Constructor¶
Parameters:rubberBand Rubberband style
trackerMode Tracker mode
parent Parent widget, that will be observed
QwtPicker::~QwtPicker () [virtual]¶
Destructor.Member Function Documentation¶
bool QwtPicker::accept (QPolygon &selection) const [protected, virtual]¶
Validate and fixup the selection. Accepts all selections unmodified Parameters:selection Selection to validate and
fixup
Returns:
true, when accepted, false otherwise
void QwtPicker::activated (boolon) [signal] A signal indicating, when the picker has been activated. Together with setEnabled() it can be used to implement selections with more than one picker.¶
Parameters:on True, when the picker has been
activated
QPolygon QwtPicker::adjustedPoints (const QPolygon &points) const [protected, virtual]¶
Map the pickedPoints() into a selection() adjustedPoints() maps the points, that have been collected on the parentWidget() into a selection(). The default implementation simply returns the points unmodified. The reason, why a selection() differs from the picked points depends on the application requirements. F.e. :- •
- A rectangular selection might need to have a specific
aspect ratio only.
- •
- A selection could accept non intersecting polygons only.
- •
-
QPolygon MyPicker::adjustedPoints(const QPolygon &points) const { QPolygon adjusted; if ( points.size() == 2 ) { const int width = qAbs(points[1].x() - points[0].x()); const int height = qAbs(points[1].y() - points[0].y()); QRect rect(0, 0, 2 * width, 2 * height); rect.moveCenter(points[0]); adjusted += rect.topLeft(); adjusted += rect.bottomRight(); } return adjusted; }
void QwtPicker::append (const QPoint &pos) [protected, virtual] Append a point to the selection and update rubberband and tracker. The appended() signal is emitted.¶
Parameters:pos Additional point
See also:
isActive(), begin(),
end(), move(), appended()
void QwtPicker::appended (const QPoint &pos) [signal] A signal emitted when a point has been appended to the selection¶
Parameters:pos Position of the appended
point.
See also:
append(). moved()
void QwtPicker::begin () [protected, virtual] Open a selection setting the state to active¶
See also:isActive(), end(),
append(), move()
void QwtPicker::changed (const QPolygon &selection) [signal] A signal emitted when the active selection has been changed. This might happen when the observed widget is resized.¶
Parameters:selection Changed selection
See also:
stretchSelection()
void QwtPicker::drawRubberBand (QPainter *painter) const [virtual] Draw a rubberband, depending on rubberBand()¶
Parameters:painter Painter, initialized with clip
rect
See also:
rubberBand(), RubberBand
void QwtPicker::drawTracker (QPainter *painter) const [virtual] Draw the tracker¶
Parameters:painter Painter
See also:
trackerRect(),
trackerText()
bool QwtPicker::end (boolok = true) [protected, virtual]¶
Close a selection setting the state to inactive. The selection is validated and maybe fixed by accept(). Parameters:ok If true, complete the selection and
emit a selected signal otherwise discard the selection.
Returns:
true if the selection is accepted, false
otherwise
See also:
isActive(), begin(),
append(), move(), selected(), accept()
bool QwtPicker::eventFilter (QObject *o, QEvent *e) [virtual]¶
Event filter. When isEnabled() == true all events of the observed widget are filtered. Mouse and keyboard events are translated into widgetMouse- and widgetKey- and widgetWheel-events. Paint and Resize events are handled to keep rubberband and tracker up to date. See also:event(), widgetEnterEvent(),
widgetLeaveEvent(), widgetMousePressEvent(),
widgetMouseReleaseEvent(), widgetMouseDoubleClickEvent(),
widgetMouseMoveEvent(), widgetWheelEvent(),
widgetKeyPressEvent(), widgetKeyReleaseEvent()
bool QwtPicker::isActive () const A picker is active between begin() and end().¶
Returns:true if the selection is active.
bool QwtPicker::isEnabled () const Returns:¶
true when enabled, false otherwise
See also:
setEnabled(),
eventFilter()
void QwtPicker::move (const QPoint &pos) [protected, virtual] Move the last point of the selection The moved() signal is emitted.¶
Parameters:pos New position
See also:
isActive(), begin(),
end(), append()
void QwtPicker::moved (const QPoint &pos) [signal] A signal emitted whenever the last appended point of the selection has been moved.¶
Parameters:pos Position of the moved last point of
the selection.
See also:
move(), appended()
QWidget * QwtPicker::parentWidget ()¶
Return the parent widget, where the selection happens.const QWidget * QwtPicker::parentWidget () const¶
Return the parent widget, where the selection happens.const QPolygon & QwtPicker::pickedPoints () const [protected] Return the points, that have been collected so far. The selection() is calculated from the pickedPoints() in adjustedPoints().¶
Returns:Picked points
QRect QwtPicker::pickRect () const [virtual] Find the area of the observed widget, where selection might happen.¶
Returns:QFrame::contentsRect() if it is a QFrame,
QWidget::rect() otherwise.
void QwtPicker::remove () [protected, virtual] Remove the last point of the selection The removed() signal is emitted.¶
See also:isActive(), begin(),
end(), append(), move()
void QwtPicker::removed (const QPoint &pos) [signal] A signal emitted whenever the last appended point of the selection has been removed.¶
See also:remove(), appended()
void QwtPicker::reset () [protected, virtual] Reset the state machine and terminate (end(false)) the selection¶
QwtPicker::ResizeMode QwtPicker::resizeMode () const Returns:¶
Resize mode
See also:
setResizeMode(),
ResizeMode
QwtPicker::RubberBand QwtPicker::rubberBand () const Returns:¶
Rubberband style
See also:
setRubberBand(), RubberBand,
rubberBandPen()
QPen QwtPicker::rubberBandPen () const Returns:¶
Rubberband pen
See also:
setRubberBandPen(),
rubberBand()
const QWidget * QwtPicker::rubberBandWidget () const [protected] Returns:¶
Widget displaying the rubberband
void QwtPicker::selected (const QPolygon &polygon) [signal] A signal emitting the selected points, at the end of a selection.¶
Parameters:polygon Selected points
QPolygon QwtPicker::selection () const Returns:¶
Selected points
See also:
pickedPoints(),
adjustedPoints()
void QwtPicker::setEnabled (boolenabled) [slot]¶
En/disable the picker. When enabled is true an event filter is installed for the observed widget, otherwise the event filter is removed. Parameters:enabled true or false
See also:
isEnabled(), eventFilter()
void QwtPicker::setResizeMode (ResizeModemode)¶
Set the resize mode. The resize mode controls what to do with the selected points of an active selection when the observed widget is resized. Stretch means the points are scaled according to the new size, KeepSize means the points remain unchanged. The default mode is Stretch. Parameters:mode Resize mode
See also:
resizeMode(), ResizeMode
void QwtPicker::setRubberBand (RubberBandrubberBand) Set the rubberband style¶
Parameters:rubberBand Rubberband style The default
value is NoRubberBand.
See also:
rubberBand(), RubberBand,
setRubberBandPen()
void QwtPicker::setRubberBandPen (const QPen &pen) Set the pen for the rubberband¶
Parameters:pen Rubberband pen
See also:
rubberBandPen(),
setRubberBand()
void QwtPicker::setStateMachine (QwtPickerMachine *stateMachine) Set a state machine and delete the previous one¶
Parameters:stateMachine State machine
See also:
stateMachine()
void QwtPicker::setTrackerFont (const QFont &font) Set the font for the tracker¶
Parameters:font Tracker font
See also:
trackerFont(), setTrackerMode(),
setTrackerPen()
void QwtPicker::setTrackerMode (DisplayModemode)¶
Set the display mode of the tracker. A tracker displays information about current position of the cursor as a string. The display mode controls if the tracker has to be displayed whenever the observed widget has focus and cursor (AlwaysOn), never (AlwaysOff), or only when the selection is active (ActiveOnly). Parameters:mode Tracker display mode
Warning:
In case of AlwaysOn, mouseTracking will be
enabled for the observed widget.
See also:
trackerMode(), DisplayMode
void QwtPicker::setTrackerPen (const QPen &pen) Set the pen for the tracker¶
Parameters:pen Tracker pen
See also:
trackerPen(), setTrackerMode(),
setTrackerFont()
const QwtPickerMachine * QwtPicker::stateMachine () const Returns:¶
Assigned state machine
See also:
setStateMachine()
QwtPickerMachine * QwtPicker::stateMachine () Returns:¶
Assigned state machine
See also:
setStateMachine()
void QwtPicker::stretchSelection (const QSize &oldSize, const QSize &newSize) [protected, virtual] Scale the selection by the ratios of oldSize and newSize The changed() signal is emitted.¶
Parameters:oldSize Previous size
newSize Current size
See also:
ResizeMode, setResizeMode(),
resizeMode()
QFont QwtPicker::trackerFont () const Returns:¶
Tracker font
See also:
setTrackerFont(), trackerMode(),
trackerPen()
QwtPicker::DisplayMode QwtPicker::trackerMode () const Returns:¶
Tracker display mode
See also:
setTrackerMode(),
DisplayMode
QPen QwtPicker::trackerPen () const Returns:¶
Tracker pen
See also:
setTrackerPen(), trackerMode(),
trackerFont()
QPoint QwtPicker::trackerPosition () const Returns:¶
Current position of the tracker
QRect QwtPicker::trackerRect (const QFont &font) const [virtual] Calculate the bounding rectangle for the tracker text from the current position of the tracker¶
Parameters:font Font of the tracker text
Returns:
Bounding rectangle of the tracker text
See also:
trackerPosition()
QwtText QwtPicker::trackerText (const QPoint &pos) const [virtual]¶
Return the label for a position. In case of HLineRubberBand the label is the value of the y position, in case of VLineRubberBand the value of the x position. Otherwise the label contains x and y position separated by a ',' . The format for the string conversion is '%d'. Parameters:pos Position
Returns:
Converted position as string
const QWidget * QwtPicker::trackerWidget () const [protected] Returns:¶
Widget displaying the tracker text
void QwtPicker::transition (const QEvent *e) [protected, virtual] Passes an event to the state machine and executes the resulting commands. Append and Move commands use the current position of the cursor (QCursor::pos()).¶
Parameters:e Event
void QwtPicker::updateDisplay () [protected, virtual]¶
Update the state of rubberband and tracker label.void QwtPicker::widgetEnterEvent (QEvent *event) [protected, virtual] Handle a enter event for the observed widget.¶
See also:eventFilter(),
widgetMousePressEvent(), widgetMouseReleaseEvent(),
widgetMouseDoubleClickEvent(), widgetWheelEvent(),
widgetKeyPressEvent(), widgetKeyReleaseEvent()
void QwtPicker::widgetKeyPressEvent (QKeyEvent *ke) [protected, virtual] Handle a key press event for the observed widget.¶
Selections can be completely done by the keyboard. The arrow keys move the cursor, the abort key aborts a selection. All other keys are handled by the current state machine. See also:eventFilter(),
widgetMousePressEvent(), widgetMouseReleaseEvent(),
widgetMouseDoubleClickEvent(), widgetMouseMoveEvent(),
widgetWheelEvent(), widgetKeyReleaseEvent(),
stateMachine(), QwtEventPattern::KeyPatternCode
void QwtPicker::widgetKeyReleaseEvent (QKeyEvent *ke) [protected, virtual] Handle a key release event for the observed widget.¶
Passes the event to the state machine. See also:eventFilter(),
widgetMousePressEvent(), widgetMouseReleaseEvent(),
widgetMouseDoubleClickEvent(), widgetMouseMoveEvent(),
widgetWheelEvent(), widgetKeyPressEvent(),
stateMachine()
void QwtPicker::widgetLeaveEvent (QEvent *event) [protected, virtual] Handle a leave event for the observed widget.¶
See also:eventFilter(),
widgetMousePressEvent(), widgetMouseReleaseEvent(),
widgetMouseDoubleClickEvent(), widgetWheelEvent(),
widgetKeyPressEvent(), widgetKeyReleaseEvent()
void QwtPicker::widgetMouseDoubleClickEvent (QMouseEvent *me) [protected, virtual] Handle mouse double click event for the observed widget.¶
Empty implementation, does nothing. See also:eventFilter(),
widgetMousePressEvent(), widgetMouseReleaseEvent(),
widgetMouseMoveEvent(), widgetWheelEvent(),
widgetKeyPressEvent(), widgetKeyReleaseEvent()
void QwtPicker::widgetMouseMoveEvent (QMouseEvent *e) [protected, virtual] Handle a mouse move event for the observed widget.¶
See also:eventFilter(),
widgetMousePressEvent(), widgetMouseReleaseEvent(),
widgetMouseDoubleClickEvent(), widgetWheelEvent(),
widgetKeyPressEvent(), widgetKeyReleaseEvent()
void QwtPicker::widgetMousePressEvent (QMouseEvent *e) [protected, virtual] Handle a mouse press event for the observed widget.¶
See also:eventFilter(),
widgetMouseReleaseEvent(), widgetMouseDoubleClickEvent(),
widgetMouseMoveEvent(), widgetWheelEvent(),
widgetKeyPressEvent(), widgetKeyReleaseEvent()
void QwtPicker::widgetMouseReleaseEvent (QMouseEvent *e) [protected, virtual] Handle a mouse relase event for the observed widget.¶
See also:eventFilter(),
widgetMousePressEvent(), widgetMouseDoubleClickEvent(),
widgetMouseMoveEvent(), widgetWheelEvent(),
widgetKeyPressEvent(), widgetKeyReleaseEvent()
void QwtPicker::widgetWheelEvent (QWheelEvent *e) [protected, virtual] Handle a wheel event for the observed widget.¶
Move the last point of the selection in case of isActive() == true See also:eventFilter(),
widgetMousePressEvent(), widgetMouseReleaseEvent(),
widgetMouseDoubleClickEvent(), widgetMouseMoveEvent(),
widgetKeyPressEvent(), widgetKeyReleaseEvent()
Author¶
Generated automatically by Doxygen for Qwt User's Guide from the source code.Fri Apr 15 2011 | Version 6.0.0 |