NAME¶
Imager::IO - Imager's io_layer object.
SYNOPSIS¶
# Imager supplies Imager::IO objects to various callbacks
my $IO = ...;
my $count = $IO->write($data);
my $count = $IO->read($buffer, $max_count);
my $position = $IO->seek($offset, $whence);
my $status = $IO->close;
DESCRIPTION¶
Imager uses an abstraction when dealing with image files to allow the same code
to work with disk files, in memory data and callbacks.
If you're writing an Imager file handler your code will be passed an Imager::IO
object to write to or read from.
Note that Imager::IO can only work with collections of bytes - if you need to
read UTF-8 data you will need to read the bytes and decode them. If you want
to write UTF-8 data you will need to encode your characters to bytes and write
the bytes.
CONSTRUCTORS¶
- new_fd($fd)
- Create a new I/O layer based on a file descriptor.
my $io = Imager::IO->new(fileno($fh));
- new_buffer($data)
- Create a new I/O layer based on a memory buffer.
The supplied variable must not be changed on the the life of the I/O object.
Buffer I/O layers are read only.
- new_cb($writecb, $readcb, $seekcb, $closecb)
- Create a new I/O layer based on callbacks. See "I/O
Callbacks" in Imager::Files for details on the behavior of the
callbacks.
- new_bufchain()
- Create a new "bufchain" based I/O layer. This
accumulates the file data as a chain of buffers starting from an empty
stream.
Use the " slurp()" method to retrieve the accumulated
content into a perl string.
BUFFERED I/O METHODS¶
These methods use buffered I/O to improve performance unless you call
set_buffered() to disable buffering.
Prior to Imager 0.86 the write and read methods performed raw I/O.
- write($data)
- Call to write to the file. Returns the number of bytes
written. The data provided may contain only characters \x00 to \xFF -
characters outside this range will cause this method to croak().
If you supply a UTF-8 flagged string it will be converted to a byte string,
which may have a performance impact.
Returns -1 on error, though in most cases if the result of the write isn't
the number of bytes supplied you'll want to treat it as an error
anyway.
- read($buffer, $size)
-
my $buffer;
my $count = $io->read($buffer, $max_bytes);
Reads up to $max_bytes bytes from the current position
in the file and stores them in $buffer. Returns the
number of bytes read on success or an empty list on failure. Note that a
read of zero bytes is not a failure, this indicates end of
file.
- read2($size)
-
my $buffer = $io->read2($max_bytes);
An alternative interface to read, that might be simpler to use in some
cases.
Returns the data read or an empty list. At end of file the data read will be
an empty string.
- seek($offset, $whence)
-
my $new_position = $io->seek($offset, $whence);
Seek to a new position in the file. Possible values for
$whence are:
- •
- "SEEK_SET" - $offset is the
new position in the file.
- •
- "SEEK_CUR" - $offset is the
offset from the current position in the file.
- •
- "SEEK_END" - $offset is the
offset relative to the end of the file.
Note that seeking past the end of the file may or may not result in an error.
Any buffered output will be flushed, if flushing fails,
seek() will
return -1.
Returns the new position in the file, or -1 on error.
- getc()
- Return the next byte from the stream.
Returns the ordinal of the byte or -1 on error or end of file.
while ((my $c = $io->getc) != -1) {
print chr($c);
}
- gets()
- gets($max_size)
- gets($max_size, $end_of_line)
- Returns the next line of input from the stream, as
terminated by "end_of_line".
The default "max_size" is 8192.
The default "end_of_line" is "ord "\n"".
Returns nothing if the stream is in error or at end of file.
Returns the line as a string, including the line terminator (if one was
found) on success.
while (defined(my $line = $io->gets)) {
# do something with $line
}
- peekc()
- Return the buffered next character from the stream, loading
the buffer if necessary.
For an unbuffered stream a buffer will be setup and loaded with a single
character.
Returns the ordinal of the byte or -1 on error or end of file.
my $c = $io->peekc;
- peekn($size)
- Returns up to the next "size" bytes from the file
as a string.
Only up to the stream buffer size bytes (currently 8192) can be peeked.
This method ignores the buffering state of the stream.
Returns nothing on EOF.
my $s = $io->peekn(4);
if ($s =~ /^(II|MM)\*\0/) {
print "TIFF image";
}
- putc($code)
- Write a single character to the stream.
Returns "code" on success, or -1 on failure.
- close()
-
my $result = $io->close;
Call when you're done with the file. If the IO object is connected to a file
this won't close the file handle, but buffers may be flushed (if any).
Returns 0 on success, -1 on failure.
- eof()
-
$io->eof
Test if the stream is at end of file. No further read requests will be
passed to your read callback until you seek().
- error()
- Test if the stream has encountered a read or write error.
my $data = $io->read2(100);
$io->error
and die "Failed";
When the stream has the error flag set no further read or write requests
will be passed to your callbacks until you seek.
- flush()
-
$io->flush
or die "Flush error";
Flush any buffered output. This will not call lower write layers when the
stream has it's error flag set.
Returns a true value on success.
- is_buffered()
- Test if buffering is enabled for this stream.
Returns a true value if the stream is buffered.
- set_buffered($enabled)
- If $enabled is a non-zero integer, enable buffering, other
disable it.
Disabling buffering will flush any buffered output, but any buffered input
will be retained and consumed by input methods.
Returns true if any buffered output was flushed successfully, false if there
was an error flushing output.
RAW I/O METHODS¶
These call the underlying I/O abstraction directly.
- raw_write()
- Call to write to the file. Returns the number of bytes
written. The data provided may contain only characters \x00 to \xFF -
characters outside this range will cause this method to croak().
If you supply a UTF-8 flagged string it will be converted to a byte string,
which may have a performance impact.
Returns -1 on error, though in most cases if the result of the write isn't
the number of bytes supplied you'll want to treat it as an error
anyway.
- raw_read()
-
my $buffer;
my $count = $io->raw_read($buffer, $max_bytes);
Reads up to $max_bytes bytes from the current position
in the file and stores them in $buffer. Returns the
number of bytes read on success or an empty list on failure. Note that a
read of zero bytes is not a failure, this indicates end of
file.
- raw_read2()
-
my $buffer = $io->raw_read2($max_bytes);
An alternative interface to raw_read, that might be simpler to use in some
cases.
Returns the data read or an empty list.
- raw_seek()
-
my $new_position = $io->raw_seek($offset, $whence);
Seek to a new position in the file. Possible values for
$whence are:
- •
- "SEEK_SET" - $offset is the
new position in the file.
- •
- "SEEK_CUR" - $offset is the
offset from the current position in the file.
- •
- "SEEK_END" - $offset is the
offset relative to the end of the file.
Note that seeking past the end of the file may or may not result in an error.
Returns the new position in the file, or -1 on error.
- raw_close()
-
my $result = $io->raw_close;
Call when you're done with the file. If the IO object is connected to a file
this won't close the file handle.
Returns 0 on success, -1 on failure.
UTILITY METHODS¶
- slurp()
- Retrieve the data accumulated from an I/O layer object
created with the new_bufchain() method.
my $data = $io->slurp;
- dump()
- Dump the internal buffering state of the I/O object to
"stderr".
$io->dump();
AUTHOR¶
Tony Cook <tonyc@cpan.org>
SEE ALSO¶
Imager, Imager::Files