table of contents
other versions
- wheezy 6:0.8.17-2
- wheezy-backports 6:10.1-1~bpo70+1
- jessie 6:11.9-1~deb8u1
- jessie-backports 7:3.2.5-1~bpo8+1
- testing 7:3.2.5-1
- unstable 7:3.2.5-1
AVPROBE(1) | AVPROBE(1) |
NAME¶
avprobe - avprobe media proberSYNOPSIS¶
avprobe [options] [ input_file]DESCRIPTION¶
avprobe gathers information from multimedia streams and prints it in human- and machine-readable fashion. For example it can be used to check the format of the container used by a multimedia stream and the format and type of each media stream contained in it. If a filename is specified in input, avprobe will try to open and probe the file content. If the file cannot be opened or recognized as a multimedia file, a positive exit code is returned. avprobe may be employed both as a standalone application or in combination with a textual filter, which may perform more sophisticated processing, e.g. statistical processing or plotting. Options are used to list some of the formats supported by avprobe or for specifying which information to display, and for setting how avprobe will show it. avprobe output is designed to be easily parsable by a textual filter, and consists of one or more sections of the form:[SECTION] key1=val1 ... keyN=valN [/SECTION]Metadata tags stored in the container or in the streams are recognized and printed in the corresponding "FORMAT" or "STREAM" section, and are prefixed by the string "TAG:".
OPTIONS¶
All the numerical options, if not specified otherwise, accept in input a string representing a number, which may contain one of the International System number postfixes, for example 'K', 'M', 'G'. If 'i' is appended after the postfix, powers of 2 are used instead of powers of 10. The 'B' postfix multiplies the value for 8, and can be appended after another postfix or used alone. This allows using for example 'KB', 'MiB', 'G' and 'B' as postfix. Options which do not take arguments are boolean options, and set the corresponding value to true. They can be set to false by prefixing with "no" the option name, for example using "-nofoo" in the command line will set to false the boolean option with name "foo".Stream specifiers¶
Some options are applied per-stream, e.g. bitrate or codec. Stream specifiers are used to precisely specify which stream(s) does a given option belong to. A stream specifier is a string generally appended to the option name and separated from it by a colon. E.g. "-codec:a:1 ac3" option contains "a:1" stream specifer, which matches the second audio stream. Therefore it would select the ac3 codec for the second audio stream. A stream specifier can match several stream, the option is then applied to all of them. E.g. the stream specifier in "-b:a 128k" matches all audio streams. An empty stream specifier matches all streams, for example "-codec copy" or "-codec: copy" would copy all the streams without reencoding. Possible forms of stream specifiers are:- stream_index
- Matches the stream with this index. E.g. "-threads:1 4" would set the thread count for the second stream to 4.
- stream_type[:stream_index]
- stream_type is one of: 'v' for video, 'a' for audio, 's' for subtitle, 'd' for data and 't' for attachments. If stream_index is given, then matches stream number stream_index of this type. Otherwise matches all streams of this type.
- p:program_id[:stream_index]
- If stream_index is given, then matches stream number stream_index in program with id program_id. Otherwise matches all streams in this program.
Generic options¶
These options are shared amongst the av* tools.- -L
- Show license.
- -h, -?, -help, --help
- Show help.
- -version
- Show version.
- -formats
- Show available formats.
- D
- Decoding available
- E
- Encoding available
- -codecs
- Show available codecs.
- D
- Decoding available
- E
- Encoding available
- V/A/S
- Video/audio/subtitle codec
- S
- Codec supports slices
- D
- Codec supports direct rendering
- T
- Codec can handle input truncated at random locations instead of only at frame boundaries
- -bsfs
- Show available bitstream filters.
- -protocols
- Show available protocols.
- -filters
- Show available libavfilter filters.
- -pix_fmts
- Show available pixel formats.
- -sample_fmts
- Show available sample formats.
- -loglevel loglevel | -v loglevel
- Set the logging level used by the library. loglevel is a number or a string containing one of the following values:
- quiet
- panic
- fatal
- error
- warning
- info
- verbose
- debug
AVOptions¶
These options are provided directly by the libavformat, libavdevice and libavcodec libraries. To see the list of available AVOptions, use the -help option. They are separated into two categories:- generic
- These options can be set for any container, codec or device. Generic options are listed under AVFormatContext options for containers/devices and under AVCodecContext options for codecs.
- private
- These options are specific to the given container, device or codec. Private options are listed under their corresponding containers/devices/codecs.
avconv -i input.flac -id3v2_version 3 out.mp3All codec AVOptions are obviously per-stream, so the chapter on stream specifiers applies to them Note -nooption syntax cannot be used for boolean AVOptions, use -option 0/ -option 1. Note2 old undocumented way of specifying per-stream AVOptions by prepending v/a/s to the options name is now obsolete and will be removed soon.
Main options¶
- -f format
- Force format to use.
- -unit
- Show the unit of the displayed values.
- -prefix
- Use SI prefixes for the displayed values. Unless the "-byte_binary_prefix" option is used all the prefixes are decimal.
- -byte_binary_prefix
- Force the use of binary prefixes for byte values.
- -sexagesimal
- Use sexagesimal format HH:MM:SS.MICROSECONDS for time values.
- -pretty
- Prettify the format of the displayed values, it corresponds to the options "-unit -prefix -byte_binary_prefix -sexagesimal".
- -show_format
- Show information about the container format of the input
multimedia stream.
- -show_packets
- Show information about each packet contained in the input
multimedia stream.
- -show_streams
- Show information about each media stream contained in the
input multimedia stream.
DEMUXERS¶
Demuxers are configured elements in Libav which allow to read the multimedia streams from a particular type of file. When you configure your Libav build, all the supported demuxers are enabled by default. You can list all available ones using the configure option "--list-demuxers". You can disable all the demuxers using the configure option "--disable-demuxers", and selectively enable a single demuxer with the option "--enable-demuxer= DEMUXER", or disable it with the option "--disable-demuxer= DEMUXER". The option "-formats" of the av* tools will display the list of enabled demuxers. The description of some of the currently available demuxers follows.image2¶
Image file demuxer. This demuxer reads from a list of image files specified by a pattern. The pattern may contain the string "%d" or "%0 Nd", which specifies the position of the characters representing a sequential number in each filename matched by the pattern. If the form "%d0 Nd" is used, the string representing the number in each filename is 0-padded and N is the total number of 0-padded digits representing the number. The literal character '%' can be specified in the pattern with the string "%%". If the pattern contains "%d" or "%0 Nd", the first filename of the file list specified by the pattern must contain a number inclusively contained between 0 and 4, all the following numbers must be sequential. This limitation may be hopefully fixed. The pattern may contain a suffix which is used to automatically determine the format of the images contained in the files. For example the pattern "img-%03d.bmp" will match a sequence of filenames of the form img-001.bmp, img-002.bmp, ..., img-010.bmp, etc.; the pattern "i%%m%%g-%d.jpg" will match a sequence of filenames of the form i%m%g-1.jpg, i%m%g-2.jpg, ..., i%m%g-10.jpg, etc. The size, the pixel format, and the format of each image must be the same for all the files in the sequence. The following example shows how to use avconv for creating a video from the images in the file sequence img-001.jpeg, img-002.jpeg, ..., assuming an input framerate of 10 frames per second:avconv -i 'img-%03d.jpeg' -r 10 out.mkvNote that the pattern must not necessarily contain "%d" or "%0 Nd", for example to convert a single image file img.jpeg you can employ the command:
avconv -i img.jpeg img.png
applehttp¶
Apple HTTP Live Streaming demuxer. This demuxer presents all AVStreams from all variant streams. The id field is set to the bitrate variant index number. By setting the discard flags on AVStreams (by pressing 'a' or 'v' in avplay), the caller can decide which variant streams to actually receive. The total bitrate of the variant that the stream belongs to is available in a metadata key named "variant_bitrate".MUXERS¶
Muxers are configured elements in Libav which allow writing multimedia streams to a particular type of file. When you configure your Libav build, all the supported muxers are enabled by default. You can list all available muxers using the configure option "--list-muxers". You can disable all the muxers with the configure option "--disable-muxers" and selectively enable / disable single muxers with the options "--enable-muxer= MUXER" / "--disable-muxer= MUXER". The option "-formats" of the av* tools will display the list of enabled muxers. A description of some of the currently available muxers follows.crc¶
CRC (Cyclic Redundancy Check) testing format. This muxer computes and prints the Adler-32 CRC of all the input audio and video frames. By default audio frames are converted to signed 16-bit raw audio and video frames to raw video before computing the CRC. The output of the muxer consists of a single line of the form: CRC=0x CRC, where CRC is a hexadecimal number 0-padded to 8 digits containing the CRC for all the decoded input frames. For example to compute the CRC of the input, and store it in the file out.crc:avconv -i INPUT -f crc out.crcYou can print the CRC to stdout with the command:
avconv -i INPUT -f crc -You can select the output format of each frame with avconv by specifying the audio and video codec and format. For example to compute the CRC of the input audio converted to PCM unsigned 8-bit and the input video converted to MPEG-2 video, use the command:
avconv -i INPUT -c:a pcm_u8 -c:v mpeg2video -f crc -See also the framecrc muxer.
framecrc¶
Per-frame CRC (Cyclic Redundancy Check) testing format. This muxer computes and prints the Adler-32 CRC for each decoded audio and video frame. By default audio frames are converted to signed 16-bit raw audio and video frames to raw video before computing the CRC. The output of the muxer consists of a line for each audio and video frame of the form: stream_index, frame_dts, frame_size, 0xCRC, where CRC is a hexadecimal number 0-padded to 8 digits containing the CRC of the decoded frame. For example to compute the CRC of each decoded frame in the input, and store it in the file out.crc:avconv -i INPUT -f framecrc out.crcYou can print the CRC of each decoded frame to stdout with the command:
avconv -i INPUT -f framecrc -You can select the output format of each frame with avconv by specifying the audio and video codec and format. For example, to compute the CRC of each decoded input audio frame converted to PCM unsigned 8-bit and of each decoded input video frame converted to MPEG-2 video, use the command:
avconv -i INPUT -c:a pcm_u8 -c:v mpeg2video -f framecrc -See also the crc muxer.
image2¶
Image file muxer. The image file muxer writes video frames to image files. The output filenames are specified by a pattern, which can be used to produce sequentially numbered series of files. The pattern may contain the string "%d" or "%0 Nd", this string specifies the position of the characters representing a numbering in the filenames. If the form "%0 Nd" is used, the string representing the number in each filename is 0-padded to N digits. The literal character '%' can be specified in the pattern with the string "%%". If the pattern contains "%d" or "%0 Nd", the first filename of the file list specified will contain the number 1, all the following numbers will be sequential. The pattern may contain a suffix which is used to automatically determine the format of the image files to write. For example the pattern "img-%03d.bmp" will specify a sequence of filenames of the form img-001.bmp, img-002.bmp, ..., img-010.bmp, etc. The pattern "img%%-%d.jpg" will specify a sequence of filenames of the form img%-1.jpg, img%-2.jpg, ..., img%-10.jpg, etc. The following example shows how to use avconv for creating a sequence of files img-001.jpeg, img-002.jpeg, ..., taking one image every second from the input video:avconv -i in.avi -vsync 1 -r 1 -f image2 'img-%03d.jpeg'Note that with avconv, if the format is not specified with the "-f" option and the output filename specifies an image file format, the image2 muxer is automatically selected, so the previous command can be written as:
avconv -i in.avi -vsync 1 -r 1 'img-%03d.jpeg'Note also that the pattern must not necessarily contain "%d" or "%0 Nd", for example to create a single image file img.jpeg from the input video you can employ the command:
avconv -i in.avi -f image2 -frames:v 1 img.jpeg
mpegts¶
MPEG transport stream muxer. This muxer implements ISO 13818-1 and part of ETSI EN 300 468. The muxer options are:- -mpegts_original_network_id number
- Set the original_network_id (default 0x0001). This is unique identifier of a network in DVB. Its main use is in the unique identification of a service through the path Original_Network_ID, Transport_Stream_ID.
- -mpegts_transport_stream_id number
- Set the transport_stream_id (default 0x0001). This identifies a transponder in DVB.
- -mpegts_service_id number
- Set the service_id (default 0x0001) also known as program in DVB.
- -mpegts_pmt_start_pid number
- Set the first PID for PMT (default 0x1000, max 0x1f00).
- -mpegts_start_pid number
- Set the first PID for data packets (default 0x0100, max 0x0f00).
avconv -i file.mpg -c copy \ -mpegts_original_network_id 0x1122 \ -mpegts_transport_stream_id 0x3344 \ -mpegts_service_id 0x5566 \ -mpegts_pmt_start_pid 0x1500 \ -mpegts_start_pid 0x150 \ -metadata service_provider="Some provider" \ -metadata service_name="Some Channel" \ -y out.ts
null¶
Null muxer. This muxer does not generate any output file, it is mainly useful for testing or benchmarking purposes. For example to benchmark decoding with avconv you can use the command:avconv -benchmark -i INPUT -f null out.nullNote that the above command does not read or write the out.null file, but specifying the output file is required by the avconv syntax. Alternatively you can write the command as:
avconv -benchmark -i INPUT -f null -
matroska¶
Matroska container muxer. This muxer implements the matroska and webm container specs. The recognized metadata settings in this muxer are:- title=title name
- Name provided to a single track
- language=language name
- Specifies the language of the track in the Matroska languages form
- STEREO_MODE=mode
- Stereo 3D video layout of two views in a single video track
- mono
- video is not stereo
- left_right
- Both views are arranged side by side, Left-eye view is on the left
- bottom_top
- Both views are arranged in top-bottom orientation, Left-eye view is at bottom
- top_bottom
- Both views are arranged in top-bottom orientation, Left-eye view is on top
- checkerboard_rl
- Each view is arranged in a checkerboard interleaved pattern, Left-eye view being first
- checkerboard_lr
- Each view is arranged in a checkerboard interleaved pattern, Right-eye view being first
- row_interleaved_rl
- Each view is constituted by a row based interleaving, Right-eye view is first row
- row_interleaved_lr
- Each view is constituted by a row based interleaving, Left-eye view is first row
- col_interleaved_rl
- Both views are arranged in a column based interleaving manner, Right-eye view is first column
- col_interleaved_lr
- Both views are arranged in a column based interleaving manner, Left-eye view is first column
- anaglyph_cyan_red
- All frames are in anaglyph format viewable through red-cyan filters
- right_left
- Both views are arranged side by side, Right-eye view is on the left
- anaglyph_green_magenta
- All frames are in anaglyph format viewable through green-magenta filters
- block_lr
- Both eyes laced in one Block, Left-eye view is first
- block_rl
- Both eyes laced in one Block, Right-eye view is first
avconv -i sample_left_right_clip.mpg -an -c:v libvpx -metadata STEREO_MODE=left_right -y stereo_clip.webm
segment¶
Basic stream segmenter. The segmenter muxer outputs streams to a number of separate files of nearly fixed duration. Output filename pattern can be set in a fashion similar to image2. Every segment starts with a video keyframe, if a video stream is present. The segment muxer works best with a single constant frame rate video. Optionally it can generate a flat list of the created segments, one segment per line.- segment_format format
- Override the inner container format, by default it is guessed by the filename extension.
- segment_time t
- Set segment duration to t seconds.
- segment_list name
- Generate also a listfile named name.
- segment_list_size size
- Overwrite the listfile once it reaches size entries.
avconv -i in.mkv -c copy -map 0 -f segment -list out.list out%03d.nut
PROTOCOLS¶
Protocols are configured elements in Libav which allow to access resources which require the use of a particular protocol. When you configure your Libav build, all the supported protocols are enabled by default. You can list all available ones using the configure option "--list-protocols". You can disable all the protocols using the configure option "--disable-protocols", and selectively enable a protocol using the option "--enable-protocol= PROTOCOL", or you can disable a particular protocol using the option "--disable-protocol= PROTOCOL". The option "-protocols" of the av* tools will display the list of supported protocols. A description of the currently available protocols follows.applehttp¶
Read Apple HTTP Live Streaming compliant segmented stream as a uniform one. The M3U8 playlists describing the segments can be remote HTTP resources or local files, accessed using the standard file protocol. HTTP is default, specific protocol can be declared by specifying "+ proto" after the applehttp URI scheme name, where proto is either "file" or "http".applehttp://host/path/to/remote/resource.m3u8 applehttp+http://host/path/to/remote/resource.m3u8 applehttp+file://path/to/local/resource.m3u8
concat¶
Physical concatenation protocol. Allow to read and seek from many resource in sequence as if they were a unique resource. A URL accepted by this protocol has the syntax:concat:<URL1>|<URL2>|...|<URLN>where URL1, URL2, ..., URLN are the urls of the resource to be concatenated, each one possibly specifying a distinct protocol. For example to read a sequence of files split1.mpeg, split2.mpeg, split3.mpeg with avplay use the command:
avplay concat:split1.mpeg\|split2.mpeg\|split3.mpegNote that you may need to escape the character "|" which is special for many shells.
file¶
File access protocol. Allow to read from or read to a file. For example to read from a file input.mpeg with avconv use the command:avconv -i file:input.mpeg output.mpegThe av* tools default to the file protocol, that is a resource specified with the name "FILE.mpeg" is interpreted as the URL "file:FILE.mpeg".
gopher¶
Gopher protocol.http¶
HTTP (Hyper Text Transfer Protocol).mmst¶
MMS (Microsoft Media Server) protocol over TCP.mmsh¶
MMS (Microsoft Media Server) protocol over HTTP. The required syntax is:mmsh://<server>[:<port>][/<app>][/<playpath>]
md5¶
MD5 output protocol. Computes the MD5 hash of the data to be written, and on close writes this to the designated output or stdout if none is specified. It can be used to test muxers without writing an actual file. Some examples follow.# Write the MD5 hash of the encoded AVI file to the file output.avi.md5. avconv -i input.flv -f avi -y md5:output.avi.md5 # Write the MD5 hash of the encoded AVI file to stdout. avconv -i input.flv -f avi -y md5:Note that some formats (typically MOV) require the output protocol to be seekable, so they will fail with the MD5 output protocol.
pipe¶
UNIX pipe access protocol. Allow to read and write from UNIX pipes. The accepted syntax is:pipe:[<number>]number is the number corresponding to the file descriptor of the pipe (e.g. 0 for stdin, 1 for stdout, 2 for stderr). If number is not specified, by default the stdout file descriptor will be used for writing, stdin for reading. For example to read from stdin with avconv:
cat test.wav | avconv -i pipe:0 # ...this is the same as... cat test.wav | avconv -i pipe:For writing to stdout with avconv:
avconv -i test.wav -f avi pipe:1 | cat > test.avi # ...this is the same as... avconv -i test.wav -f avi pipe: | cat > test.aviNote that some formats (typically MOV), require the output protocol to be seekable, so they will fail with the pipe output protocol.
rtmp¶
Real-Time Messaging Protocol. The Real-Time Messaging Protocol (RTMP) is used for streaming multimedia content across a TCP/IP network. The required syntax is:rtmp://<server>[:<port>][/<app>][/<playpath>]The accepted parameters are:
- server
- The address of the RTMP server.
- port
- The number of the TCP port to use (by default is 1935).
- app
- It is the name of the application to access. It usually corresponds to the path where the application is installed on the RTMP server (e.g. /ondemand/, /flash/live/, etc.).
- playpath
- It is the path or name of the resource to play with reference to the application specified in app, may be prefixed by "mp4:".
avplay rtmp://myserver/vod/sample
rtmp, rtmpe, rtmps, rtmpt, rtmpte¶
Real-Time Messaging Protocol and its variants supported through librtmp. Requires the presence of the librtmp headers and library during configuration. You need to explicitly configure the build with "--enable-librtmp". If enabled this will replace the native RTMP protocol. This protocol provides most client functions and a few server functions needed to support RTMP, RTMP tunneled in HTTP (RTMPT), encrypted RTMP (RTMPE), RTMP over SSL/TLS (RTMPS) and tunneled variants of these encrypted types (RTMPTE, RTMPTS). The required syntax is:<rtmp_proto>://<server>[:<port>][/<app>][/<playpath>] <options>where rtmp_proto is one of the strings "rtmp", "rtmpt", "rtmpe", "rtmps", "rtmpte", "rtmpts" corresponding to each RTMP variant, and server, port, app and playpath have the same meaning as specified for the RTMP native protocol. options contains a list of space-separated options of the form key=val. See the librtmp manual page (man 3 librtmp) for more information. For example, to stream a file in real-time to an RTMP server using avconv:
avconv -re -i myfile -f flv rtmp://myserver/live/mystreamTo play the same stream using avplay:
avplay "rtmp://myserver/live/mystream live=1"
rtp¶
Real-Time Protocol.rtsp¶
RTSP is not technically a protocol handler in libavformat, it is a demuxer and muxer. The demuxer supports both normal RTSP (with data transferred over RTP; this is used by e.g. Apple and Microsoft) and Real-RTSP (with data transferred over RDT). The muxer can be used to send a stream using RTSP ANNOUNCE to a server supporting it (currently Darwin Streaming Server and Mischa Spiegelmock'sRTSP server ("http://github.com/revmischa/rtsp-server")). The required syntax for a RTSP url is:
rtsp://<hostname>[:<port>]/<path>The following options (set on the avconv/avplay command line, or set in code via "AVOption"s or in "avformat_open_input"), are supported: Flags for "rtsp_transport":
- udp
- Use UDP as lower transport protocol.
- tcp
- Use TCP (interleaving within the RTSP control channel) as lower transport protocol.
- udp_multicast
- Use UDP multicast as lower transport protocol.
- http
- Use HTTP tunneling as lower transport protocol, which is useful for passing proxies.
- filter_src
- Accept packets only from negotiated peer address and port.
avplay -max_delay 500000 -rtsp_transport udp rtsp://server/video.mp4To watch a stream tunneled over HTTP:
avplay -rtsp_transport http rtsp://server/video.mp4To send a stream in realtime to a RTSP server, for others to watch:
avconv -re -i <input> -f rtsp -muxdelay 0.1 rtsp://server/live.sdp
sap¶
Session Announcement Protocol (RFC 2974). This is not technically a protocol handler in libavformat, it is a muxer and demuxer. It is used for signalling of RTP streams, by announcing the SDP for the streams regularly on a separate port. Muxer The syntax for a SAP url given to the muxer is:sap://<destination>[:<port>][?<options>]The RTP packets are sent to destination on port port, or to port 5004 if no port is specified. options is a "&"-separated list. The following options are supported:
- announce_addr=address
- Specify the destination IP address for sending the announcements to. If omitted, the announcements are sent to the commonly used SAP announcement multicast address 224.2.127.254 (sap.mcast.net), or ff0e::2:7ffe if destination is an IPv6 address.
- announce_port=port
- Specify the port to send the announcements on, defaults to 9875 if not specified.
- ttl=ttl
- Specify the time to live value for the announcements and RTP packets, defaults to 255.
- same_port=0|1
- If set to 1, send all RTP streams on the same port pair. If zero (the default), all streams are sent on unique ports, with each stream on a port 2 numbers higher than the previous. VLC/Live555 requires this to be set to 1, to be able to receive the stream. The RTP stack in libavformat for receiving requires all streams to be sent on unique ports.
avconv -re -i <input> -f sap sap://224.0.0.255?same_port=1Similarly, for watching in avplay:
avconv -re -i <input> -f sap sap://224.0.0.255And for watching in avplay, over IPv6:
avconv -re -i <input> -f sap sap://[ff0e::1:2:3:4]Demuxer The syntax for a SAP url given to the demuxer is:
sap://[<address>][:<port>]address is the multicast address to listen for announcements on, if omitted, the default 224.2.127.254 (sap.mcast.net) is used. port is the port that is listened on, 9875 if omitted. The demuxers listens for announcements on the given address and port. Once an announcement is received, it tries to receive that particular stream. Example command lines follow. To play back the first stream announced on the normal SAP multicast address:
avplay sap://To play back the first stream announced on one the default IPv6 SAP multicast address:
avplay sap://[ff0e::2:7ffe]
tcp¶
Trasmission Control Protocol. The required syntax for a TCP url is:tcp://<hostname>:<port>[?<options>]
- listen
- Listen for an incoming connection
avconv -i <input> -f <format> tcp://<hostname>:<port>?listen avplay tcp://<hostname>:<port>
udp¶
User Datagram Protocol. The required syntax for a UDP url is:udp://<hostname>:<port>[?<options>]options contains a list of &-seperated options of the form key= val. Follow the list of supported options.
- buffer_size=size
- set the UDP buffer size in bytes
- localport=port
- override the local UDP port to bind with
- localaddr=addr
- Choose the local IP address. This is useful e.g. if sending multicast and the host has multiple interfaces, where the user can choose which interface to send on by specifying the IP address of that interface.
- pkt_size=size
- set the size in bytes of UDP packets
- reuse=1|0
- explicitly allow or disallow reusing UDP sockets
- ttl=ttl
- set the time to live value (for multicast only)
- connect=1|0
- Initialize the UDP socket with "connect()". In this case, the destination address can't be changed with ff_udp_set_remote_url later. If the destination address isn't known at the start, this option can be specified in ff_udp_set_remote_url, too. This allows finding out the source address for the packets with getsockname, and makes writes return with AVERROR(ECONNREFUSED) if "destination unreachable" is received. For receiving, this gives the benefit of only receiving packets from the specified peer address/port.
avconv -i <input> -f <format> udp://<hostname>:<port>To stream in mpegts format over UDP using 188 sized UDP packets, using a large input buffer:
avconv -i <input> -f mpegts udp://<hostname>:<port>?pkt_size=188&buffer_size=65535To receive over UDP from a remote endpoint:
avconv -i udp://[<multicast-address>]:<port>
INPUT DEVICES¶
Input devices are configured elements in Libav which allow to access the data coming from a multimedia device attached to your system. When you configure your Libav build, all the supported input devices are enabled by default. You can list all available ones using the configure option "--list-indevs". You can disable all the input devices using the configure option "--disable-indevs", and selectively enable an input device using the option "--enable-indev= INDEV", or you can disable a particular input device using the option "--disable-indev= INDEV". The option "-formats" of the av* tools will display the list of supported input devices (amongst the demuxers). A description of the currently available input devices follows.alsa¶
ALSA (Advanced Linux Sound Architecture) input device. To enable this input device during configuration you need libasound installed on your system. This device allows capturing from an ALSA device. The name of the device to capture has to be an ALSA card identifier. An ALSA identifier has the syntax:hw:<CARD>[,<DEV>[,<SUBDEV>]]where the DEV and SUBDEV components are optional. The three arguments (in order: CARD,DEV,SUBDEV) specify card number or identifier, device number and subdevice number (-1 means any). To see the list of cards currently recognized by your system check the files /proc/asound/cards and /proc/asound/devices. For example to capture with avconv from an ALSA device with card id 0, you may run the command:
avconv -f alsa -i hw:0 alsaout.wavFor more information see: < http://www.alsa-project.org/alsa-doc/alsa-lib/pcm.html>
bktr¶
BSD video input device.dv1394¶
Linux DV 1394 input device.fbdev¶
Linux framebuffer input device. The Linux framebuffer is a graphic hardware-independent abstraction layer to show graphics on a computer monitor, typically on the console. It is accessed through a file device node, usually /dev/fb0. For more detailed information read the file Documentation/fb/framebuffer.txt included in the Linux source tree. To record from the framebuffer device /dev/fb0 with avconv:avconv -f fbdev -r 10 -i /dev/fb0 out.aviYou can take a single screenshot image with the command:
avconv -f fbdev -frames:v 1 -r 1 -i /dev/fb0 screenshot.jpegSee also < http://linux-fbdev.sourceforge.net/>, and fbset(1).
jack¶
JACK input device. To enable this input device during configuration you need libjack installed on your system. A JACK input device creates one or more JACK writable clients, one for each audio channel, with name client_name:input_N, where client_name is the name provided by the application, and N is a number which identifies the channel. Each writable client will send the acquired data to the Libav input device. Once you have created one or more JACK readable clients, you need to connect them to one or more JACK writable clients. To connect or disconnect JACK clients you can use the jack_connect and jack_disconnect programs, or do it through a graphical interface, for example with qjackctl. To list the JACK clients and their properties you can invoke the command jack_lsp. Follows an example which shows how to capture a JACK readable client with avconv.# Create a JACK writable client with name "libav". $ avconv -f jack -i libav -y out.wav # Start the sample jack_metro readable client. $ jack_metro -b 120 -d 0.2 -f 4000 # List the current JACK clients. $ jack_lsp -c system:capture_1 system:capture_2 system:playback_1 system:playback_2 libav:input_1 metro:120_bpm # Connect metro to the avconv writable client. $ jack_connect metro:120_bpm libav:input_1For more information read: < http://jackaudio.org/>
libdc1394¶
IIDC1394 input device, based on libdc1394 and libraw1394.oss¶
Open Sound System input device. The filename to provide to the input device is the device node representing the OSS input device, and is usually set to /dev/dsp. For example to grab from /dev/dsp using avconv use the command:avconv -f oss -i /dev/dsp /tmp/oss.wavFor more information about OSS see: < http://manuals.opensound.com/usersguide/dsp.html>
pulse¶
pulseaudio input device. To enable this input device during configuration you need libpulse-simple installed in your system. The filename to provide to the input device is a source device or the string "default" To list the pulse source devices and their properties you can invoke the command pactl list sources.avconv -f pulse -i default /tmp/pulse.wavserver AVOption The syntax is:
-server <server name>Connects to a specific server. name AVOption The syntax is:
-name <application name>Specify the application name pulse will use when showing active clients, by default it is "libav" stream_name AVOption The syntax is:
-stream_name <stream name>Specify the stream name pulse will use when showing active streams, by default it is "record" sample_rate AVOption The syntax is:
-sample_rate <samplerate>Specify the samplerate in Hz, by default 48kHz is used. channels AVOption The syntax is:
-channels <N>Specify the channels in use, by default 2 (stereo) is set. frame_size AVOption The syntax is:
-frame_size <bytes>Specify the number of byte per frame, by default it is set to 1024. fragment_size AVOption The syntax is:
-fragment_size <bytes>Specify the minimal buffering fragment in pulseaudio, it will affect the audio latency. By default it is unset.
sndio¶
sndio input device. To enable this input device during configuration you need libsndio installed on your system. The filename to provide to the input device is the device node representing the sndio input device, and is usually set to /dev/audio0. For example to grab from /dev/audio0 using avconv use the command:avconv -f sndio -i /dev/audio0 /tmp/oss.wav
video4linux and video4linux2¶
Video4Linux and Video4Linux2 input video devices. The name of the device to grab is a file device node, usually Linux systems tend to automatically create such nodes when the device (e.g. an USB webcam) is plugged into the system, and has a name of the kind /dev/videoN, where N is a number associated to the device. Video4Linux and Video4Linux2 devices only support a limited set of widthxheight sizes and framerates. You can check which are supported for example with the command dov4l for Video4Linux devices and using -list_formats all for Video4Linux2 devices. If the size for the device is set to 0x0, the input device will try to autodetect the size to use. Only for the video4linux2 device, if the frame rate is set to 0/0 the input device will use the frame rate value already set in the driver. Video4Linux support is deprecated since Linux 2.6.30, and will be dropped in later versions. Follow some usage examples of the video4linux devices with the av* tools.# Grab and show the input of a video4linux device, frame rate is set # to the default of 25/1. avplay -s 320x240 -f video4linux /dev/video0 # Grab and show the input of a video4linux2 device, autoadjust size. avplay -f video4linux2 /dev/video0 # Grab and record the input of a video4linux2 device, autoadjust size, # frame rate value defaults to 0/0 so it is read from the video4linux2 # driver. avconv -f video4linux2 -i /dev/video0 out.mpeg
vfwcap¶
VfW (Video for Windows) capture input device. The filename passed as input is the capture driver number, ranging from 0 to 9. You may use "list" as filename to print a list of drivers. Any other filename will be interpreted as device number 0.x11grab¶
X11 video input device. This device allows to capture a region of an X11 display. The filename passed as input has the syntax:[<hostname>]:<display_number>.<screen_number>[+<x_offset>,<y_offset>]hostname:display_number.screen_number specifies the X11 display name of the screen to grab from. hostname can be ommitted, and defaults to "localhost". The environment variable DISPLAY contains the default display name. x_offset and y_offset specify the offsets of the grabbed area with respect to the top-left border of the X11 screen. They default to 0. Check the X11 documentation (e.g. man X) for more detailed information. Use the dpyinfo program for getting basic information about the properties of your X11 display (e.g. grep for "name" or "dimensions"). For example to grab from :0.0 using avconv:
avconv -f x11grab -r 25 -s cif -i :0.0 out.mpg # Grab at position 10,20. avconv -f x11grab -r 25 -s cif -i :0.0+10,20 out.mpgfollow_mouse AVOption The syntax is:
-follow_mouse centered|<PIXELS>When it is specified with "centered", the grabbing region follows the mouse pointer and keeps the pointer at the center of region; otherwise, the region follows only when the mouse pointer reaches within PIXELS (greater than zero) to the edge of region. For example:
avconv -f x11grab -follow_mouse centered -r 25 -s cif -i :0.0 out.mpg # Follows only when the mouse pointer reaches within 100 pixels to edge avconv -f x11grab -follow_mouse 100 -r 25 -s cif -i :0.0 out.mpgshow_region AVOption The syntax is:
-show_region 1If show_region AVOption is specified with 1, then the grabbing region will be indicated on screen. With this option, it's easy to know what is being grabbed if only a portion of the screen is grabbed. For example:
avconv -f x11grab -show_region 1 -r 25 -s cif -i :0.0+10,20 out.mpg # With follow_mouse avconv -f x11grab -follow_mouse centered -show_region 1 -r 25 -s cif -i :0.0 out.mpg
SEE ALSO¶
avconv(1), avplay(1) and the Libav HTML documentationAUTHORS¶
The Libav developers2016-03-02 |