NAME¶
jsv_is_param, jsv_get_param, jsv_add_param, jsv_mod_param, jsv_del_param,
jsv_sub_is_param, jsv_sub_get_param, jsv_sub_add_param, jsv_sub_del_param,
jsv_is_env, jsv_get_env, jsv_add_env, jsv_mod_env, jsv_del_env, jsv_accept,
jsv_correct, jsv_reject, jsv_reject_wait, jsv_show_params, jsv_show_envs,
jsv_log_info, jsv_log_warning, jsv_log_error, jsv_main - Sun Grid Engine Job
Submission Verifier Scripting Interface
SYNOPSIS¶
jsv_clear_params();
jsv_is_param(param_name);
jsv_get_param(param_name);
jsv_set_param(param_name, param_value);
jsv_del_param(param_name);
jsv_sub_is_param(param_name, variable_name);
jsv_sub_get_param(param_name, variable_name);
jsv_sub_add_param(param_name, variable_name, variable_value);
jsv_sub_del_param(param_name, variable_name);
jsv_clear_envs();
jsv_is_env(variable_name);
jsv_get_env(variable_name);
jsv_add_env(variable_name, variable_value);
jsv_mod_env(variable_name, variable_value);
jsv_del_env(variable_name);
jsv_accept(message);
jsv_correct(message);
jsv_reject(message);
jsv_reject_wait(message);
jsv_show_params();
jsv_show_envs();
jsv_log_info(message);
jsv_log_warning(message);
jsv_log_error(message);
jsv_main();
jsv_send_env();
jsv_on_start();
jsv_on_verify();
DESCRIPTION¶
The functions documented here implement the server side of the JSV protocol as
it is described in the man page These script functions are available in Bourne
shell, TCL or Perl scripts after sourcing/including the files jsv_inlcude.sh,
jsv_include.tcl or JSV.pm. The files and corresponding JSV script templates
are located in the directory $SGE_ROOT/util/resources/jsv.
jsv_clear_params()¶
This function clears all received job parameters that were stored during the
last job verification process.
jsv_clear_envs()¶
This function clears all received job environment variables that were stored
during the last job verification process.
jsv_show_params()¶
A call of this function reports all known job parameters to the counterpart of
this script (client or master daemon thread). This parameters will be reported
as info messages and appear either in the stdout stream of the client or in
the message file of the master process.
jsv_show_envs()¶
A call of this function reports all known job environment variables to the
counterpart of this script (client or master daemon thread). They will be
reported as info messages and appear in the stdout stream of the client or in
the message file of the master process.
jsv_is_param()¶
This function returns whether or not a specific job parameters is available for
the job which is currently being verified. Either the string
true or
false will be returned. The availability/absence of a job parameter
does not mean that the corresponding command line switch was used/not used.
The following values are allowed for
param_name. Corresponding
qsub/
qrsh/
qsh/... switches next to the parameter name
are mentioned only if they are different from the command line switches.
Find additional information in man page describing the availability and value
format. Job parameters written in capital letters are pseudo parameters. A
detailed description for them can be found in
param_name command line switch/description
a
ac combination of -ac, -sc, -dc
ar
A
b
c
ckpt
cwd
display
dl
e
h
hold_jid
hold_jid_ad
i
l_hard -l or -hard followed by -l
l_soft -soft followed by -l
j
js
m
M
masterq
N
notify
now
N
o
ot
P
pe
q_hard -q or -hard followed by -q
q_soft -soft followed by -q
R
r
shell
S
t
w
wd
CLIENT
CONTEXT
GROUP
VERSION
JOB_ID
SCRIPT
CMDARGS
CMDARG<i> where <i> is a nonnegative number
USER
The function returns the string
true if the parameter (
param_name)
exists in the job currently being verified. If it does not exist
false
will be returned.
jsv_get_param()¶
This function returns the value of a specific job parameter (
param_name).
This value is only available if the function
jsv_is_param() returns
true. Otherwise an empty string is returned.
Find a list of allowed parameter names in the section for the function
jsv_is_param().
jsv_set_param()¶
This function changes the job parameter (
param_name) to the value
param_value .
If
param_value is an empty string then the corresponding job parameter
will be deleted similar to the function
jsv_del_param(). As a result
the job parameter is not available as if the corresponding command line switch
was not specified during job submission.
For boolean parameters that only accept the values
yes or
no it is
not allowed to pass an empty string as
param_value.
Also for the parameters
c and
m it is not allowed to use empty
strings. Details can be found in
jsv_del_param()¶
This function deletes the job parameter
param_name.
Find a list of allowed parameter names in the section for the function
jsv_is_param().
jsv_sub_is_param()¶
Some job parameters are lists that can contain multiple variables with an
optional value.
This function returns
true if a job parameters list contains a variable
and
false otherwise.
false might also indicate that the
parameter list itself is not available. Use the function
jsv_is_param()
to check if the parameter list is not available.
The following parameters are list parameters. The second columns describes
corresponding variable names to be used. The third column contains a dash (-)
if there is no value (
variable_value) allowed when the functions
jsv_sub_add_param() or it indicated that
jsv_sub_get_param()
will return always an empty string. A question mark (?) shows that the value
is optional.
param_name variable_name variable_value
ac job context variable name
hold_jid job identifier -
l_hard complex attribute name ?
l_soft complex attribute name ?
M mail address -
masterq cluster queue name or -
queue instance name
q_hard cluster queue name or -
queue instance name
q_soft cluster queue name or -
queue instance name
jsv_sub_get_param()¶
Some job parameters are lists that can contain multiple variables with an
optional value.
This function returns the value of a variable (
variable_name). For sub
list elements that have no value an empty string will be returned.
Find a list of allowed parameter names (
param_name) and variable names (
variable_name) in the section for the function
jsv_sub_is_param().
jsv_sub_add_param()¶
Some job parameters are list that can contain multiple variables with an
optional value.
This function either adds a new variable with a new value or it modifies the
value if the variable is already in the list parameter.
variable_value
is optional. In that case, the variable has no value.
Find a list of allowed parameter names (
param_name) and variable names (
variable_name) in the section for the function
jsv_sub_is_param().
jsv_sub_del_param()¶
Some job parameters are lists which can contain multiple variables with an
optional value.
This function deletes a variable (
variable_name) and if available the
corresponding value. If (
variable_name) is not available in the job
parameter then the command will be ignored.
Find a list of allowed parameter names (
param_name) and variable names (
variable_name ) in the section for the function
jsv_sub_is_param().
jsv_is_env()¶
If the function returns
true, then the job environment variable with the
name
variable_name exists in the job currently being verified and
jsv_get_env() can be used to retrieve the value of that variable. If
the function returns
false, then the job environment variable
(
variable_name) does not exist.
jsv_get_env()¶
This function returns the value of a job environment variable (
variable_name).
This variable has to be passed with the
qsub command line switch
-v or
-V and it has to be enabled that environment variable data
is passed to JSV scripts. Environment variable data is passed when the
function
jsv_send_env() is called in the callback function
jsv_on_start().
If the variable does not exist or if environment variable information is not
available then an empty string will be returned.
jsv_add_env()¶
This function adds an additional environment variable to the set of variables
that will exported to the job, when it is started. As a result the
variable_name and
variable_value become available, as if the -v
or -V was specified during job submission.
variable_value is optional. If there is an empty string passed then the
variable is defined without value.
If
variable_name already exists in the set of job environment variables,
then the corresponding value will be replaced by
variable_value, as if
the function
jsv_mod_env() was used. If an empty string is passed then
the old value will be deleted.
To delete a environment variable the function
jsv_del_env() has to be
used.
jsv_mod_env()¶
This function modifies an existing environment variable that is in the set of
variables which will exported to the job, when it is started. As a result, the
variable_name and
variable_value will be available as if the -v
or -V was specified during job submission.
variable_value is optional. If there is an empty string passed then the
variable is defined without value.
If
variable_name does not already exist in the set of job environment
variables, then the corresponding name and value will be added as if the
function
jsv_add_env() was used.
To delete a environment variable, use the function
jsv_del_env().
jsv_del_env()¶
This function removes a job environment variable (
variable_name) from
the set of variables that will be exported to the job, when it is started.
If
variable_name does not already exists in the set of job environment
variables then the command is ignored.
To change the value of a variable use the function
jsv_mod_env() to add a
new value, call the function
jsv_add_env().
jsv_accept()¶
This function can only be used in
jsv_on_verify(). After it has been
called, the function
jsv_on_verify() has to return immediately.
A call to this function indicates that the job that is currently being verified
should be accepted as it was initially provided. All job modifications that
might have been applied in
jsv_on_verify() before this function was
called, are then ignored.
Instead of calling
jsv_accept() in
jsv_on_verify() also the
functions
jsv_correct(),
jsv_reject() or
jsv_reject_wait() can be called, but only one of these functions can be
used at a time.
jsv_correct()¶
This function can only be used in
jsv_on_verify(). After it has been
called, the function
jsv_on_verify() has to return immediately.
A call to this function indicates that the job that is currently being verified
has to be modified before it can be accepted. All job parameter modifications
that were previously applied will be committed and the job will be accepted.
"Accept" in that case means that the job will either be passed to
the next JSV instance for modification or that it is passed to that component
in the master daemon that adds it to the master data store when the last JSV
instance has verified the job.
Instead of calling
jsv_correct() in
jsv_on_verify(), the functions
jsv_accept(),
jsv_reject() or
jsv_reject_wait() can be
called, but only one of these functions can be used.
jsv_reject()¶
This function can only be used in
jsv_on_verify(). After it has been
called the function
jsv_on_verify() has to return immediately.
The job that is currently being verified will be rejected.
message will
be passed to the client application that tried to submit the job. Commandline
clients like
qsub will print that message to stdout to inform the user
that the submission has failed.
jsv_reject_wait() should be called if the user may try to submit the job
again.
jsv_reject_wait() indicates that the verification process might
be successful in the future.
Instead of calling
jsv_reject() in
jsv_on_verify() also the
functions
jsv_accept(),
jsv_correct() or
jsv_reject_wait() can be also called, but only one of these functions
can be used.
jsv_reject_wait()¶
This function can only be used in
jsv_on_verify(). After it has been
called the function
jsv_on_verify() has to return immediately.
The job which is currently verified will be rejected.
message will be
passed to the client application, that tries to submit the job. Commandline
clients like
qsub will print that message to stdout to inform the user
that the submission has failed.
This function should be called if the user who tries to submit the job might
have a chance to submit the job later.
jsv_reject indicates that the
verified job will also be rejected in future.
Instead of calling
jsv_reject_wait() in
jsv_on_verify() the
functions
jsv_accept(),
jsv_correct() or
jsv_reject() can
be also called, but only one of these functions can be used.
jsv_log_info()¶
This function sends an info
message to the client or master daemon
instance that started the JSV script.
For client JSVs, this means that the command line client will get the
information and print it to the stdout stream. Server JSVs will print that
message as an info message to the master daemon message file.
If
message is missing then and empty line will be printed.
jsv_log_warning()¶
This function sends a warning
message to the client or master daemon
instance that started the JSV script.
For client JSVs, this means that the command line client will get the
information and print it to the stdout stream. Server JSVs will print that
message as an warning message to the master daemon message file.
If
message is missing then and empty line will be printed.
jsv_log_error()¶
This function sends an error
message to the client or master daemon
instance that started the JSV script.
For client JSVs, this means that the command line client will get the
information and print it to the stdout stream. Server JSVs will print that
message as an error message to the master daemon message file.
If
message is missing then and empty line will be printed.
jsv_send_env()¶
This function can only be used in
jsv_on_start(). If it is used there,
then the job environment information will be available in
jsv_on_verify() for the next job that is scheduled to be verified.
This function must be called for the functions
jsv_show_envs(),
jsv_is_env(),
jsv_get_env(),
jsv_add_env() and
jsv_mod_env() to behave correctly.
Job environments might become very big (10K and more). This will slow down the
executing component (submit client or master daemon thread). For this reason,
job environment information is not passed to JSV scripts by default.
Please note also that the data in the job environment can't be verified by Grid
Engine and might therefore contain data which could be misinterpreted in the
script environment and cause security issues.
jsv_main()¶
This function has to be called an main function in JSV scripts. It implements
the JSV protocol and performs the communication with client and server
components which might start JSV scripts.
This function does not return immediately. It returns only when the
"QUIT" command is send by the client or server component.
During the communication with client and server components, this function
triggers two callback functions for each job that should be verified. First
jsv_on_start() and later on
jsv_on_verify().
jsv_on_start() can be used to initialize certain things that might be
needed for the verification process.
jsv_on_verify() does the
verification process itself.
The function
jsv_send_env() can be called in
jsv_on_start() so
that the job environment is available in
jsv_on_verify().
The following function can only be used in
jsv_on_verify(). Simple job
parameters can be accessed/modified with:
jsv_is_param,
jsv_get_param,
jsv_set_param and
jsv_del_param.
List based job parameters can be accessed with:
jsv_sub_is_param,
jsv_sub_get_param,
jsv_sub_add_param and
jsv_sub_del_param
If the environment was requested with
jsv_send_env() in
jsv_on_start() then the environment can be accessed/modified with the
following commands:
jsv_is_env,
jsv_get_env,
jsv_add_env,
jsv_mod_env and
jsv_del_env
Jobs can be accepted/rejected with the following:
jsv_accept,
jsv_correct,
jsv_reject and
jsv_reject_wait.
The following functions send messages to the calling component of a JSV that
will either appear on the stdout stream of the client or in the master message
file. This is especially useful when new JSV scripts should be tested:
jsv_show_params , jsv_show_envs,
jsv_log_info , jsv_log_warning and
jsv_log_error
jsv_on_start()¶
This is a callback function that has to be defined by the creator of a JSV
script. It is called for every job short time before the verification process
of a job starts.
Within this function
jsv_send_env can be called to request job
environment information for the next job is scheduled to be verified.
After this function returns
jsv_on_verify() will be called. This function
does there verification process itself.
jsv_on_verify()¶
This is a callback function that has to be defined by the creator of a JSV
script. It is called for every job and when it returns a the job will either
be accepted or rejected. Find implementation examples in the directory
$SGE_ROOT/util/resources/jsv.
The logic of this function completely depends on the creator of this function.
The creator has only to take care that one of the functions
jsv_accept(),
jsv_reject(),
jsv_reject_wait() or
jsv_correct() is called before the function returns.
EXAMPLES¶
Find in the table below the returned values for the "*is*" and
"*get*" functions when following job is submitted:
qsub -l mem=1G,mem2=200M ...
function call returned value
----------------------------- -----------------
jsv_is_param(l_hard) "true"
jsv_get_param(l_hard) "mem=1G,mem2=200M"
jsv_sub_is_param(l_hard,mem) "true"
jsv_sub_get_param(l_hard,mem) "1G"
jsv_sub_get_param(l_hard,mem3) "false"
jsv_sub_get_param(l_hard,mem3) ""
SEE ALSO¶
COPYRIGHT¶
See for a full statement of rights and permissions.