NAME¶
gmt2rgb - Converting a grid file, a raw, or a Sun raster file to r/g/b grids
SYNOPSIS¶
gmt2rgb infile -Gtemplate [
-Ccptfile
] [
-F ] [
-Ixinc[
m|
c][/
yinc[
m|
c]] ] [
-Llayer ] [
-Rxmin/
xmax/
ymin/
ymax[
r] ] [
-V ] [
-Wwidth/
height[/
n_bytes] ]
DESCRIPTION¶
gmt2rgb reads one of three types of input files: (1) A Sun 8-, 24-, or
32-bit raster file; we the write out the red, green, and blue components
(0-255 range) to separate grid files. Since the raster file header is limited
you may use the
-R,
-F,
-I options to set a complete
header record [Default is simply based on the number of rows and columns]. (2)
A binary 2-D grid file; we then convert the z-values to red, green, blue via
the provided cpt file. Optionally, only write out one of the r, g, b, layers.
(3) A RGB or RGBA raw raster file. Since raw rasterfiles have no header, you
have to give the image dimensions via the
-W option.
- infile
- The (1) Sun raster file, (2) 2-D binary grid file, or (3)
raw raster file to be converted.
- -G
- Provide an output name template for the three output grids.
The template should be a regular grid file name except it must contain the
string %c which on output will be replaced by r, g, or b.
OPTIONS¶
- -C
- name of the color palette table (for 2-D binary input grid
only).
- -F
- Force pixel node registration [Default is gridline
registration]. (Node registrations are defined in GMT Cookbook
Appendix B on grid file formats.)
- -I
- x_inc [and optionally y_inc] is the grid
spacing. Optionally, append a suffix modifier. Geographical (degrees)
coordinates: Append m to indicate arc minutes or c to
indicate arc seconds. If one of the units e, k, i, or
n is appended instead, the increment is assumed to be given in
meter, km, miles, or nautical miles, respectively, and will be converted
to the equivalent degrees longitude at the middle latitude of the region
(the conversion depends on ELLIPSOID). If /y_inc is given
but set to 0 it will be reset equal to x_inc; otherwise it will be
converted to degrees latitude. All coordinates: If = is
appended then the corresponding max x (east) or y
(north) may be slightly adjusted to fit exactly the given increment
[by default the increment may be adjusted slightly to fit the given
domain]. Finally, instead of giving an increment you may specify the
number of nodes desired by appending + to the supplied
integer argument; the increment is then recalculated from the number of
nodes and the domain. The resulting increment value depends on whether you
have selected a gridline-registered or pixel-registered grid; see Appendix
B for details. Note: if -Rgrdfile is used then grid spacing
has already been initialized; use -I to override the values.
- -L
- Output only the specified layer (r, g, or b). [Default
outputs all 3 layers].
- -R
- xmin, xmax, ymin, and ymax
specify the Region of interest. For geographic regions, these limits
correspond to west, east, south, and north and you may
specify them in decimal degrees or in [+-]dd:mm[:ss.xxx][W|E|S|N] format.
Append r if lower left and upper right map coordinates are given
instead of w/e/s/n. The two shorthands -Rg and -Rd stand for
global domain (0/360 and -180/+180 in longitude respectively, with -90/+90
in latitude). Alternatively, specify the name of an existing grid file and
the -R settings (and grid spacing, if applicable) are copied from
the grid. For calendar time coordinates you may either give (a) relative
time (relative to the selected TIME_EPOCH and in the selected
TIME_UNIT; append t to -JX|x), or (b) absolute
time of the form [ date]T[clock] (append T to
-JX|x). At least one of date and clock must be
present; the T is always required. The date string must be
of the form [-]yyyy[-mm[-dd]] (Gregorian calendar) or yyyy[-Www[-d]] (ISO
week calendar), while the clock string must be of the form
hh:mm:ss[.xxx]. The use of delimiters and their type and positions must be
exactly as indicated (however, input, output and plot formats are
customizable; see gmtdefaults).
- -V
- Selects verbose mode, which will send progress reports to
stderr [Default runs "silently"].
- -W
- Sets the size of the raw raster file. By default an RGB
file (which has 3 bytes/pixel) is assumed. For RGBA files use
n_bytes = 4. Use -W for guessing the image size of a RGB raw
file, and -W=/=/4 if the raw image is of the RGBA type.
Notice that this might be a bit slow because the guessing algorithm makes
uses of FFTs.
EXAMPLES¶
To use the color palette topo.cpt to create r, g, b component grids from
hawaii_grv.grd file, use
gmt2rgb hawaii_grv.grd
-Ctopo.cpt
-Ghawaii_grv_%c.grd
To output the red component from the Sun raster radiation.ras file, use
gmt2rgb radiation.ras
-Lr
-Gcomp_%c.grd
SEE ALSO¶
gmtdefaults(1),
GMT(1),
grdedit(1),
grdimage(1),
grdmath(1),
grdview(1)