NAME¶
gitdiffcore - Tweaking diff output
SYNOPSIS¶
git diff *
DESCRIPTION¶
The diff commands
git diff-index,
git diff-files, and
git
diff-tree can be told to manipulate differences they find in
unconventional ways before showing
diff output. The manipulation is
collectively called "diffcore transformation". This short note
describes what they are and how to use them to produce
diff output that
is easier to understand than the conventional kind.
THE CHAIN OF OPERATION¶
The
git diff-* family works by first comparing two sets of files:
•
git diff-index compares contents of a "tree" object and the
working directory (when
--cached flag is not used) or a
"tree" object and the index file (when
--cached flag is
used);
•
git diff-files compares contents of the index file and the working
directory;
•
git diff-tree compares contents of two "tree" objects;
In all of these cases, the commands themselves first optionally limit the two
sets of files by any pathspecs given on their command-lines, and compare
corresponding paths in the two resulting sets of files.
The pathspecs are used to limit the world diff operates in. They remove the
filepairs outside the specified sets of pathnames. E.g. If the input set of
filepairs included:
:100644 100644 bcd1234... 0123456... M junkfile
but the command invocation was git diff-files myfile, then the junkfile entry
would be removed from the list because only "myfile" is under
consideration.
The result of comparison is passed from these commands to what is internally
called "diffcore", in a format similar to what is output when the -p
option is not used. E.g.
in-place edit :100644 100644 bcd1234... 0123456... M file0
create :000000 100644 0000000... 1234567... A file4
delete :100644 000000 1234567... 0000000... D file5
unmerged :000000 000000 0000000... 0000000... U file6
The diffcore mechanism is fed a list of such comparison results (each of which
is called "filepair", although at this point each of them talks
about a single file), and transforms such a list into another list. There are
currently 5 such transformations:
•diffcore-break
•diffcore-rename
•diffcore-merge-broken
•diffcore-pickaxe
•diffcore-order
These are applied in sequence. The set of filepairs
git diff-* commands
find are used as the input to diffcore-break, and the output from
diffcore-break is used as the input to the next transformation. The final
result is then passed to the output routine and generates either diff-raw
format (see Output format sections of the manual for
git diff-*
commands) or diff-patch format.
DIFFCORE-BREAK: FOR SPLITTING UP COMPLETE
REWRITES""¶
The second transformation in the chain is diffcore-break, and is controlled by
the -B option to the
git diff-* commands. This is used to detect a
filepair that represents "complete rewrite" and break such filepair
into two filepairs that represent delete and create. E.g. If the input
contained this filepair:
:100644 100644 bcd1234... 0123456... M file0
and if it detects that the file "file0" is completely rewritten, it
changes it to:
:100644 000000 bcd1234... 0000000... D file0
:000000 100644 0000000... 0123456... A file0
For the purpose of breaking a filepair, diffcore-break examines the extent of
changes between the contents of the files before and after modification (i.e.
the contents that have "bcd1234..." and "0123456..." as
their SHA1 content ID, in the above example). The amount of deletion of
original contents and insertion of new material are added together, and if it
exceeds the "break score", the filepair is broken into two. The
break score defaults to 50% of the size of the smaller of the original and the
result (i.e. if the edit shrinks the file, the size of the result is used; if
the edit lengthens the file, the size of the original is used), and can be
customized by giving a number after "-B" option (e.g.
"-B75" to tell it to use 75%).
DIFFCORE-RENAME: FOR DETECTION RENAMES AND COPIES¶
This transformation is used to detect renames and copies, and is controlled by
the -M option (to detect renames) and the -C option (to detect copies as well)
to the
git diff-* commands. If the input contained these filepairs:
:100644 000000 0123456... 0000000... D fileX
:000000 100644 0000000... 0123456... A file0
and the contents of the deleted file fileX is similar enough to the contents of
the created file file0, then rename detection merges these filepairs and
creates:
:100644 100644 0123456... 0123456... R100 fileX file0
When the "-C" option is used, the original contents of modified files,
and deleted files (and also unmodified files, if the
"--find-copies-harder" option is used) are considered as candidates
of the source files in rename/copy operation. If the input were like these
filepairs, that talk about a modified file fileY and a newly created file
file0:
:100644 100644 0123456... 1234567... M fileY
:000000 100644 0000000... bcd3456... A file0
the original contents of fileY and the resulting contents of file0 are compared,
and if they are similar enough, they are changed to:
:100644 100644 0123456... 1234567... M fileY
:100644 100644 0123456... bcd3456... C100 fileY file0
In both rename and copy detection, the same "extent of changes"
algorithm used in diffcore-break is used to determine if two files are
"similar enough", and can be customized to use a similarity score
different from the default of 50% by giving a number after the "-M"
or "-C" option (e.g. "-M8" to tell it to use 8/10 = 80%).
Note. When the "-C" option is used with --find-copies-harder option,
git diff-* commands feed unmodified filepairs to diffcore mechanism as
well as modified ones. This lets the copy detector consider unmodified files
as copy source candidates at the expense of making it slower. Without
--find-copies-harder,
git diff-* commands can detect copies only if the
file that was copied happened to have been modified in the same changeset.
DIFFCORE-MERGE-BROKEN: FOR PUTTING COMPLETE REWRITES" BACK
TOGETHER"¶
This transformation is used to merge filepairs broken by diffcore-break, and not
transformed into rename/copy by diffcore-rename, back into a single
modification. This always runs when diffcore-break is used.
For the purpose of merging broken filepairs back, it uses a different
"extent of changes" computation from the ones used by diffcore-break
and diffcore-rename. It counts only the deletion from the original, and does
not count insertion. If you removed only 10 lines from a 100-line document,
even if you added 910 new lines to make a new 1000-line document, you did not
do a complete rewrite. diffcore-break breaks such a case in order to help
diffcore-rename to consider such filepairs as candidate of rename/copy
detection, but if filepairs broken that way were not matched with other
filepairs to create rename/copy, then this transformation merges them back
into the original "modification".
The "extent of changes" parameter can be tweaked from the default 80%
(that is, unless more than 80% of the original material is deleted, the broken
pairs are merged back into a single modification) by giving a second number to
-B option, like these:
•-B50/60 (give 50% "break
score" to diffcore-break, use 60% for diffcore-merge-broken).
•-B/60 (the same as above, since
diffcore-break defaults to 50%).
Note that earlier implementation left a broken pair as a separate creation and
deletion patches. This was an unnecessary hack and the latest implementation
always merges all the broken pairs back into modifications, but the resulting
patch output is formatted differently for easier review in case of such a
complete rewrite by showing the entire contents of old version prefixed with
-, followed by the entire contents of new version prefixed with
+.
DIFFCORE-PICKAXE: FOR DETECTING ADDITION/DELETION OF SPECIFIED
STRING¶
This transformation is used to find filepairs that represent changes that touch
a specified string, and is controlled by the -S option and the --pickaxe-all
option to the
git diff-* commands.
When diffcore-pickaxe is in use, it checks if there are filepairs whose
"result" side and whose "origin" side have different
number of specified string. Such a filepair represents "the string
appeared in this changeset". It also checks for the opposite case that
loses the specified string.
When --pickaxe-all is not in effect, diffcore-pickaxe leaves only such filepairs
that touch the specified string in its output. When --pickaxe-all is used,
diffcore-pickaxe leaves all filepairs intact if there is such a filepair, or
makes the output empty otherwise. The latter behaviour is designed to make
reviewing of the changes in the context of the whole changeset easier.
DIFFCORE-ORDER: FOR SORTING THE OUTPUT BASED ON FILENAMES¶
This is used to reorder the filepairs according to the user’s (or
project’s) taste, and is controlled by the -O option to the
git
diff-* commands.
This takes a text file each of whose lines is a shell glob pattern. Filepairs
that match a glob pattern on an earlier line in the file are output before
ones that match a later line, and filepairs that do not match any glob pattern
are output last.
As an example, a typical orderfile for the core git probably would look like
this:
README
Makefile
Documentation
*.h
*.c
t
SEE ALSO¶
git-diff(1),
git-diff-files(1),
git-diff-index(1),
git-diff-tree(1),
git-format-patch(1),
git-log(1),
gitglossary(7),
The Git User’s Manual[1]
GIT¶
Part of the
git(1) suite.
NOTES¶
- 1.
- The Git User’s Manual