other versions
- wheezy 1:1.7.10.4-1+wheezy3
- wheezy-backports 1:1.9.1-1~bpo70+2
- jessie 1:2.1.4-2.1+deb8u2
- jessie-backports 1:2.11.0-3~bpo8+1
- testing 1:2.11.0-3
- unstable 1:2.11.0-4
- experimental 1:2.13.1+next.20170610-1
GIT-SUBMODULE(1) | Git Manual | GIT-SUBMODULE(1) |
NAME¶
git-submodule - Initialize, update or inspect submodulesSYNOPSIS¶
git submodule [--quiet] add [-b branch] [-f|--force] [--reference <repository>] [--] <repository> [<path>] git submodule [--quiet] status [--cached] [--recursive] [--] [<path>...] git submodule [--quiet] init [--] [<path>...] git submodule [--quiet] update [--init] [-N|--no-fetch] [--rebase] [--reference <repository>] [--merge] [--recursive] [--] [<path>...] git submodule [--quiet] summary [--cached|--files] [(-n|--summary-limit) <n>] [commit] [--] [<path>...] git submodule [--quiet] foreach [--recursive] <command> git submodule [--quiet] sync [--] [<path>...]
DESCRIPTION¶
Submodules allow foreign repositories to be embedded within a dedicated subdirectory of the source tree, always pointed at a particular commit.COMMANDS¶
addAdd the given repository as a submodule at the
given path to the changeset to be committed next to the current project: the
current project is termed the "superproject".
This requires at least one argument: <repository>. The optional argument
<path> is the relative location for the cloned submodule to exist in the
superproject. If <path> is not given, the "humanish" part of
the source repository is used ("repo" for
"/path/to/repo.git" and "foo" for
"host.xz:foo/.git").
<repository> is the URL of the new submodule’s origin repository.
This may be either an absolute URL, or (if it begins with ./ or ../), the
location relative to the superproject’s origin repository (Please note
that to specify a repository foo.git which is located right next to a
superproject bar.git, you’ll have to use ../foo.git
instead of ./foo.git - as one might expect when following the rules for
relative URLs - because the evaluation of relative URLs in Git is identical to
that of relative directories). If the superproject doesn’t have an
origin configured the superproject is its own authoritative upstream and the
current working directory is used instead.
<path> is the relative location for the cloned submodule to exist in the
superproject. If <path> does not exist, then the submodule is created by
cloning from the named URL. If <path> does exist and is already a valid
git repository, then this is added to the changeset without cloning. This
second form is provided to ease creating a new submodule from scratch, and
presumes the user will later push the submodule to the given URL.
In either case, the given URL is recorded into .gitmodules for use by subsequent
users cloning the superproject. If the URL is given relative to the
superproject’s repository, the presumption is the superproject and
submodule repositories will be kept together in the same relative location,
and only the superproject’s URL needs to be provided: git-submodule will
correctly locate the submodule using the relative URL in .gitmodules.
status
Show the status of the submodules. This will
print the SHA-1 of the currently checked out commit for each submodule, along
with the submodule path and the output of git describe for the SHA-1.
Each SHA-1 will be prefixed with - if the submodule is not initialized, + if
the currently checked out submodule commit does not match the SHA-1 found in
the index of the containing repository and U if the submodule has merge
conflicts. This command is the default command for git submodule.
If --recursive is specified, this command will recurse into nested submodules,
and show their status as well.
If you are only interested in changes of the currently initialized submodules
with respect to the commit recorded in the index or the HEAD,
git-status(1) and git-diff(1) will provide that information too
(and can also report changes to a submodule’s work tree).
init
Initialize the submodules, i.e. register each
submodule name and url found in .gitmodules into .git/config. It will also
copy the value of submodule.$name.update into .git/config. The key used in
.git/config is submodule.$name.url. This command does not alter existing
information in .git/config. You can then customize the submodule clone URLs in
.git/config for your local setup and proceed to git submodule update; you can
also just use git submodule update --init without the explicit init
step if you do not intend to customize any submodule locations.
update
Update the registered submodules, i.e. clone
missing submodules and checkout the commit specified in the index of the
containing repository. This will make the submodules HEAD be detached unless
--rebase or --merge is specified or the key submodule.$name.update is set to
rebase, merge or none. none can be overriden by specifying --checkout.
If the submodule is not yet initialized, and you just want to use the setting as
stored in .gitmodules, you can automatically initialize the submodule with the
--init option.
If --recursive is specified, this command will recurse into the registered
submodules, and update any nested submodules within.
summary
Show commit summary between the given commit
(defaults to HEAD) and working tree/index. For a submodule in question, a
series of commits in the submodule between the given super project commit and
the index or working tree (switched by --cached) are shown. If the option
--files is given, show the series of commits in the submodule between the
index of the super project and the working tree of the submodule (this option
doesn’t allow to use the --cached option or to provide an explicit
commit).
Using the --submodule=log option with git-diff(1) will provide that
information too.
foreach
Evaluates an arbitrary shell command in each
checked out submodule. The command has access to the variables $name, $path,
$sha1 and $toplevel: $name is the name of the relevant submodule section in
.gitmodules, $path is the name of the submodule directory relative to the
superproject, $sha1 is the commit as recorded in the superproject, and
$toplevel is the absolute path to the top-level of the superproject. Any
submodules defined in the superproject but not checked out are ignored by this
command. Unless given --quiet, foreach prints the name of each submodule
before evaluating the command. If --recursive is given, submodules are
traversed recursively (i.e. the given shell command is evaluated in nested
submodules as well). A non-zero return from the command in any submodule
causes the processing to terminate. This can be overridden by adding ||
: to the end of the command.
As an example, git submodule foreach 'echo $path `git rev-parse HEAD`' will show
the path and currently checked out commit for each submodule.
sync
Synchronizes submodules' remote URL
configuration setting to the value specified in .gitmodules. It will only
affect those submodules which already have a URL entry in .git/config (that is
the case when they are initialized or freshly added). This is useful when
submodule URLs change upstream and you need to update your local repositories
accordingly.
"git submodule sync" synchronizes all submodules while "git
submodule sync -- A" synchronizes submodule "A" only.
OPTIONS¶
-q, --quietOnly print error messages.
-b, --branch
Branch of repository to add as
submodule.
-f, --force
This option is only valid for add and update
commands. When running add, allow adding an otherwise ignored submodule path.
When running update, throw away local changes in submodules when switching to
a different commit.
--cached
This option is only valid for status and
summary commands. These commands typically use the commit found in the
submodule HEAD, but with this option, the commit stored in the index is used
instead.
--files
This option is only valid for the summary
command. This command compares the commit in the index with that in the
submodule HEAD when this option is used.
-n, --summary-limit
This option is only valid for the summary
command. Limit the summary size (number of commits shown in total). Giving 0
will disable the summary; a negative number means unlimited (the default).
This limit only applies to modified submodules. The size is always limited to
1 for added/deleted/typechanged submodules.
-N, --no-fetch
This option is only valid for the update
command. Don’t fetch new objects from the remote site.
--merge
This option is only valid for the update
command. Merge the commit recorded in the superproject into the current branch
of the submodule. If this option is given, the submodule’s HEAD will not
be detached. If a merge failure prevents this process, you will have to
resolve the resulting conflicts within the submodule with the usual conflict
resolution tools. If the key submodule.$name.update is set to merge, this
option is implicit.
--rebase
This option is only valid for the update
command. Rebase the current branch onto the commit recorded in the
superproject. If this option is given, the submodule’s HEAD will not be
detached. If a merge failure prevents this process, you will have to resolve
these failures with git-rebase(1). If the key submodule.$name.update is
set to rebase, this option is implicit.
--init
This option is only valid for the update
command. Initialize all submodules for which "git submodule init"
has not been called so far before updating.
--reference <repository>
This option is only valid for add and update
commands. These commands sometimes need to clone a remote repository. In this
case, this option will be passed to the git-clone(1) command.
NOTE: Do not use this option unless you have read the note for
git-clone(1)'s --reference and --shared options carefully.
--recursive
This option is only valid for foreach, update
and status commands. Traverse submodules recursively. The operation is
performed not only in the submodules of the current repo, but also in any
nested submodules inside those submodules (and so on).
<path>...
Paths to submodule(s). When specified this
will restrict the command to only operate on the submodules found at the
specified paths. (This argument is required with add).
FILES¶
When initializing submodules, a .gitmodules file in the top-level directory of the containing repository is used to find the url of each submodule. This file should be formatted in the same way as $GIT_DIR/config. The key to each submodule url is "submodule.$name.url". See gitmodules(5) for details.GIT¶
Part of the git(1) suite03/19/2016 | Git 1.7.10.4 |