NAME¶
freeipmi_interpret_sel.conf - specify system event log (SEL) interpretation
rules
DESCRIPTION¶
The
/etc/freeipmi//freeipmi_interpret_sel.conf defines how IPMI system
event log entries should be interpreted. IPMI system events specify a number
of states/thresholds when they are read. Based on those states/thresholds,
libraries and tools such as
libipmimonitoring(3) and
ipmi-sel(8)
can report if an event is "good" or "bad" via a report of
a NOMINAL, WARNING, or CRITICAL state. A different state can be reported for
an event depending on if it is asserted or deasserted.
Each of the states listed below are (hopefully) descriptive enough to describe
the state conditions that may be set/unset for each sensor or event type. For
more detailed information on each of the individual states listed below,
please see the IPMI Specification "Sensor and Event Code Tables".
Ipmi-sensors(8) can be used to determine the sensor types and the
states/thresholds that exist on a system by outputting very verbose output and
seeing what types of Assertion or Deassertion events are possible.
Each of the events below may may take 1 or 2 of the following states as input.
Nominal - Signal Nominal reading if event tripped
Warning - Signal Warning reading if event tripped
Critical - Signal Critical reading if event tripped
If only one state is listed, that state will be interpreted when the event is
asserted or deasserted. If two states are listed, the first state will be
interpreted when an event is asserted, and the later will be interpreted when
an event is deasserted.
Not all IPMI sensor types and event types are currently supported. If you would
like more to be supported, please e-mail the FreeIPMI mailing list.
The default values selected for individual events being tripped are based on
best guesses and motherboards being analyzed. If you think they should be
changed, please e-mail the FreeIPMI mailing list to discuss what the defaults
should be.
Most default interpretations can be determined quite easily and can meet the
needs of most users. For example, a reading of "Performance_Met" is
normally better than "Performance_Lags". However, some sensors can
be ambiguous and depend completely on the manufacturer. For example,
"State_Asserted" vs. "State_Deasserted" are completely at
the interpretation of the vendor. Users are advised to adjust the
interpretations below as needed for their machines.
The configuration options that can be specified in the configuration file are
listed below. Each configuration option must be listed on a separate line.
Arguments for an option are separated by any amount of whitespace. Multiple
arguments are also separated by whitespace. Comments can be marked by using
the pound sign ("#") character, and lines can be continued on the
next using backslash ("\").
OPTIONS¶
- IPMI_Threshold_Sensor
- The following states correspond to threshold sensor events.
This normally applies to events that dealing with non-discrete values,
such as temperatures, voltages, RPM, etc.
- IPMI_Threshold_Sensor_Lower_Non_Critical_Going_Low
- Defaults to Warning/Nominal.
- IPMI_Threshold_Sensor_Lower_Non_Critical_Going_High
- Defaults to Nominal/Nominal.
- IPMI_Threshold_Sensor_Lower_Critical_Going_Low
- Defaults to Critical/Warning.
- IPMI_Threshold_Sensor_Lower_Critical_Going_High
- Defaults to Warning/Warning.
- IPMI_Threshold_Sensor_Lower_Non_Recoverable_Going_Low
- Defaults to Critical/Critical.
- IPMI_Threshold_Sensor_Lower_Non_Recoverable_Going_High
- Defaults to Critical/Critical.
- IPMI_Threshold_Sensor_Upper_Non_Critical_Going_Low
- Defaults to Nominal/Nominal.
- IPMI_Threshold_Sensor_Upper_Non_Critical_Going_High
- Defaults to Warning/Nominal.
- IPMI_Threshold_Sensor_Upper_Critical_Going_Low
- Defaults to Warning/Warning.
- IPMI_Threshold_Sensor_Upper_Critical_Going_High
- Defaults to Critical/Warning.
- IPMI_Threshold_Sensor_Upper_Non_Recoverable_Going_Low
- Defaults to Critical/Critical.
- IPMI_Threshold_Sensor_Upper_Non_Recoverable_Going_High
- Defaults to Critical/Critical.
- IPMI_Temperature_State
- The following states correspond to Temperature sensor
events that report an assertion or deassertion.
- IPMI_Temperature_State_Deasserted
- Defaults to Nominal.
- IPMI_Temperature_State_Asserted
- Defaults to Warning.
- IPMI_Temperature_Limit
- The following states correspond to Temperature sensor
events that report on limits.
- IPMI_Temperature_Limit_Not_Exceeded
- Defaults to Nominal.
- IPMI_Temperature_Limit_Exceeded
- Defaults to Critical.
- IPMI_Temperature_Transition_Severity
- The following states correspond to Temperature sensor
events that report on device severity.
- IPMI_Temperature_Transition_Severity_Transition_To_OK
- Defaults to Nominal.
- IPMI_Temperature_Transition_Severity_Transition_To_Non_Critical_From_OK
- Defaults to Warning.
- IPMI_Temperature_Transition_Severity_Transition_To_Critical_From_Less_Severe
- Defaults to Critical.
- IPMI_Temperature_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
- Defaults to Critical.
- IPMI_Temperature_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
- Defaults to Warning.
- IPMI_Temperature_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
- Defaults to Critical.
- IPMI_Temperature_Transition_Severity_Transition_To_Non_Recoverable
- Defaults to Critical.
- IPMI_Temperature_Transition_Severity_Monitor
- Defaults to Warning.
- IPMI_Temperature_Transition_Severity_Informational
- Defaults to Nominal.
- IPMI_Voltage_State
- The following states correspond to Voltage sensor events
that report an assertion or deassertion.
- IPMI_Voltage_State_Deasserted
- Defaults to Nominal.
- IPMI_Voltage_State_Asserted
- Defaults to Warning.
- IPMI_Voltage_Limit
- The following states correspond to Voltage sensor events
that report on limits.
- IPMI_Voltage_Limit_Not_Exceeded
- Defaults to Nominal.
- IPMI_Voltage_Limit_Exceeded
- Defaults to Critical.
- IPMI_Voltage_Performance
- The following states correspond to Voltage sensor events
that report on performance.
- IPMI_Voltage_Performance_Met
- Defaults to Nominal/Nominal.
- IPMI_Voltage_Performance_Lags
- Defaults to Critical/Warning.
- IPMI_Voltage_Transition_Severity
- The following states correspond to Voltage sensor events
that report on device severity.
- IPMI_Voltage_Transition_Severity_Transition_To_OK
- Defaults to Nominal.
- IPMI_Voltage_Transition_Severity_Transition_To_Non_Critical_From_OK
- Defaults to Warning.
- IPMI_Voltage_Transition_Severity_Transition_To_Critical_From_Less_Severe
- Defaults to Critical.
- IPMI_Voltage_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
- Defaults to Critical.
- IPMI_Voltage_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
- Defaults to Warning.
- IPMI_Voltage_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
- Defaults to Critical.
- IPMI_Voltage_Transition_Severity_Transition_To_Non_Recoverable
- Defaults to Critical.
- IPMI_Voltage_Transition_Severity_Monitor
- Defaults to Warning.
- IPMI_Voltage_Transition_Severity_Informational
- Defaults to Nominal.
- IPMI_Current_Transition_Severity
- The following states correspond to Current sensor events
that report on device severity.
- IPMI_Current_Transition_Severity_Transition_To_OK
- Defaults to Nominal.
- IPMI_Current_Transition_Severity_Transition_To_Non_Critical_From_OK
- Defaults to Warning.
- IPMI_Current_Transition_Severity_Transition_To_Critical_From_Less_Severe
- Defaults to Critical.
- IPMI_Current_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
- Defaults to Critical.
- IPMI_Current_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
- Defaults to Warning.
- IPMI_Current_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
- Defaults to Critical.
- IPMI_Current_Transition_Severity_Transition_To_Non_Recoverable
- Defaults to Critical.
- IPMI_Current_Transition_Severity_Monitor
- Defaults to Warning.
- IPMI_Current_Transition_Severity_Informational
- Defaults to Nominal.
- IPMI_Fan_State
- The following states correspond to Fan sensor events that
report an assertion or deassertion.
- IPMI_Fan_State_Deasserted
- Defaults to Nominal.
- IPMI_Fan_State_Asserted
- Defaults to Warning.
- IPMI_Fan_Transition_Severity
- The following states correspond to Fan sensor events that
report on device severity.
- IPMI_Fan_Transition_Severity_Transition_To_OK
- Defaults to Nominal.
- IPMI_Fan_Transition_Severity_Transition_To_Non_Critical_From_OK
- Defaults to Warning.
- IPMI_Fan_Transition_Severity_Transition_To_Critical_From_Less_Severe
- Defaults to Critical.
- IPMI_Fan_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
- Defaults to Critical.
- IPMI_Fan_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
- Defaults to Warning.
- IPMI_Fan_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
- Defaults to Critical.
- IPMI_Fan_Transition_Severity_Transition_To_Non_Recoverable
- Defaults to Critical.
- IPMI_Fan_Transition_Severity_Monitor
- Defaults to Warning.
- IPMI_Fan_Transition_Severity_Informational
- Defaults to Nominal.
- IPMI_Fan_Device_Present
- The following states correspond to Fan sensor events that
report on device installation.
- IPMI_Fan_Device_Present_Device_Removed_Device_Absent
- Defaults to Critical.
- IPMI_Fan_Device_Present_Device_Inserted_Device_Present
- Defaults to Nominal.
- IPMI_Fan_Transition_Availability
- The following states correspond to Fan sensor events that
report on device availability.
- IPMI_Fan_Transition_Availability_To_Running
- Defaults to Nominal/Nominal.
- IPMI_Fan_Transition_Availability_To_In_Test
- Defaults to Warning/Warning.
- IPMI_Fan_Transition_Availability_To_Power_Off
- Defaults to Warning/Warning.
- IPMI_Fan_Transition_Availability_To_On_Line
- Defaults to Warning/Warning.
- IPMI_Fan_Transition_Availability_To_Off_Line
- Defaults to Warning/Warning.
- IPMI_Fan_Transition_Availability_To_Off_Duty
- Defaults to Warning/Warning.
- IPMI_Fan_Transition_Availability_To_Degraded
- Defaults to Critical/Warning.
- IPMI_Fan_Transition_Availability_To_Power_Save
- Defaults to Warning/Warning.
- IPMI_Fan_Transition_Availability_Install_Error
- Defaults to Critical/Critical.
- IPMI_Fan_Redundancy
- The following states correspond to Fan sensor events that
report on redundancy.
- IPMI_Fan_Redundancy_Fully_Redundant
- Defaults to Nominal/Nominal.
- IPMI_Fan_Redundancy_Redundancy_Lost
- Defaults to Critical/Warning.
- IPMI_Fan_Redundancy_Redundancy_Degraded
- Defaults to Warning/Warning.
- IPMI_Fan_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant
- Defaults to Critical/Warning.
- IPMI_Fan_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy
- Defaults to Critical/Warning.
- IPMI_Fan_Redundancy_Non_Redundant_Insufficient_Resources
- Defaults to Critical/Warning.
- IPMI_Fan_Redundancy_Redundancy_Degraded_From_Fully_Redundant
- Defaults to Warning/Warning.
- IPMI_Fan_Redundancy_Redundancy_Degraded_From_Non_Redundant
- Defaults to Warning/Warning.
- IPMI_Physical_Security
- The following states correspond to Physical Security sensor
events w/ Physical Security specific output events.
- IPMI_Physical_Security_General_Chassis_Intrusion
- Defaults to Critical.
- IPMI_Physical_Security_Drive_Bay_Intrusion
- Defaults to Critical.
- IPMI_Physical_Security_IO_Card_Intrusion
- Defaults to Critical.
- IPMI_Physical_Security_Processor_Area_Intrusion
- Defaults to Critical.
- IPMI_Physical_Security_LAN_Leash_Lost
- Defaults to Critical.
- IPMI_Physical_Security_Unauthorized_Dock_Undock
- Defaults to Critical.
- IPMI_Physical_Security_FAN_Area_Intrusion
- Defaults to Critical.
- IPMI_Platform_Security_Violation_Attempt
- The following states correspond to Platform Violation
Attempt sensor events w/ Platform Security Violation Attempt specific
output events.
- IPMI_Platform_Security_Violation_Attempt_Secure_Mode_Violation_Attempt
- Defaults to Critical.
- IPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Violation_User_Password
- Defaults to Critical.
- IPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Violation_Attempt_Setup_Password
- Defaults to Critical.
- IPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Violation_Network_Boot_Password
- Defaults to Critical.
- IPMI_Platform_Security_Violation_Attempt_Other_Pre_Boot_Password_Violation
- Defaults to Critical.
- IPMI_Platform_Security_Violation_Attempt_Out_Of_Band_Access_Password_Violation
- Defaults to Critical.
- IPMI_Processor
- The following states correspond to Processor sensor events
w/ Processor specific output events.
- IPMI_Processor_IERR
- Defaults to Critical.
- IPMI_Processor_Thermal_Trip
- Defaults to Critical.
- IPMI_Processor_FRB1_BIST_Failure
- Defaults to Critical.
- IPMI_Processor_FRB2_Hang_In_POST_Failure
- Defaults to Critical.
- IPMI_Processor_FRB3_Processor_Startup_Initialization_Failure
- Defaults to Critical.
- IPMI_Processor_Configuration_Error
- Defaults to Critical.
- IPMI_Processor_SMBIOS_Uncorrectable_CPU_Complex_Error
- Defaults to Critical.
- IPMI_Processor_Processor_Presence_Detected
- Defaults to Nominal.
- IPMI_Processor_Processor_Disabled
- Defaults to Critical.
- IPMI_Processor_Terminator_Presence_Detected
- Defaults to Critical.
- IPMI_Processor_Processor_Automatically_Throttled
- Defaults to Warning.
- IPMI_Processor_Machine_Check_Exception
- Defaults to Critical.
- IPMI_Processor_Correctable_Machine_Check_Error
- Defaults to Warning.
- IPMI_Processor_State
- The following states correspond to Processor sensor events
that report an assertion or deassertion.
- IPMI_Processor_State_Deasserted
- Defaults to Nominal.
- IPMI_Processor_State_Asserted
- Defaults to Critical.
- IPMI_Power_Supply
- The following states correspond to Power Supply sensor
events w/ Power Supply specific output events.
- IPMI_Power_Supply_Presence_Detected
- Defaults to Nominal/Nominal.
- IPMI_Power_Supply_Power_Supply_Failure_Detected
- Defaults to Critical/Critical.
- IPMI_Power_Supply_Predictive_Failure
- Defaults to Critical/Critical.
- IPMI_Power_Supply_Power_Supply_Input_Lost_AC_DC
- Defaults to Critical/Warning.
- IPMI_Power_Supply_Power_Supply_Input_Lost_Or_Out_Of_Range
- Defaults to Critical/Warning.
- IPMI_Power_Supply_Power_Supply_Input_Out_Of_Range_But_Present
- Defaults to Critical/Warning.
- IPMI_Power_Supply_Configuration_Error
- Defaults to Critical/Critical.
- IPMI_Power_Supply_State
- The following states correspond to Power_Supply sensor
events that report an assertion or deassertion.
- IPMI_Power_Supply_State_Deasserted
- Defaults to Critical.
- IPMI_Power_Supply_State_Asserted
- Defaults to Nominal.
- IPMI_Power_Supply_Transition_Severity
- The following states correspond to Power Supply sensor
events that report on device severity.
- IPMI_Power_Supply_Transition_Severity_Transition_To_OK
- Defaults to Nominal.
- IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Critical_From_OK
- Defaults to Warning.
- IPMI_Power_Supply_Transition_Severity_Transition_To_Critical_From_Less_Severe
- Defaults to Critical.
- IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
- Defaults to Critical.
- IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
- Defaults to Warning.
- IPMI_Power_Supply_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
- Defaults to Critical.
- IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Recoverable
- Defaults to Critical.
- IPMI_Power_Supply_Transition_Severity_Monitor
- Defaults to Warning.
- IPMI_Power_Supply_Transition_Severity_Informational
- Defaults to Nominal.
- IPMI_Power_Supply_Redundancy
- The following states correspond to Power Supply sensor
events that report on redundancy.
- IPMI_Power_Supply_Redundancy_Fully_Redundant
- Defaults to Nominal/Nominal.
- IPMI_Power_Supply_Redundancy_Redundancy_Lost
- Defaults to Critical/Warning.
- IPMI_Power_Supply_Redundancy_Redundancy_Degraded
- Defaults to Warning/Warning.
- IPMI_Power_Supply_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant
- Defaults to Critical/Warning.
- IPMI_Power_Supply_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy
- Defaults to Critical/Warning.
- IPMI_Power_Supply_Redundancy_Non_Redundant_Insufficient_Resources
- Defaults to Critical/Warning.
- IPMI_Power_Supply_Redundancy_Redundancy_Degraded_From_Fully_Redundant
- Defaults to Warning/Warning.
- IPMI_Power_Supply_Redundancy_Redundancy_Degraded_From_Non_Redundant
- Defaults to Warning/Warning.
- IPMI_Power_Unit
- The following states correspond to Power Unit sensor events
w/ Power Unit specific output events.
- IPMI_Power_Unit_Power_Off_Power_Down
- Defaults to Nominal/Nominal.
- IPMI_Power_Unit_Power_Cycle
- Defaults to Nominal/Nominal.
- IPMI_Power_Unit_240VA_Power_Down
- Defaults to Warning/Nominal.
- IPMI_Power_Unit_Interlock_Power_Down
- Defaults to Warning/Warning.
- IPMI_Power_Unit_AC_Lost
- Defaults to Critical/Warning.
- IPMI_Power_Unit_Soft_Power_Control_Failure
- Defaults to Critical/Critical.
- IPMI_Power_Unit_Power_Unit_Failure_Detected
- Defaults to Critical/Critical.
- IPMI_Power_Unit_Predictive_Failure
- Defaults to Critical/Critical.
- IPMI_Power_Unit_Device_Present
- The following states correspond to Power Unit sensor events
that report on device installation.
- IPMI_Power_Unit_Device_Present_Device_Removed_Device_Absent
- Defaults to Critical.
- IPMI_Power_Unit_Device_Present_Device_Inserted_Device_Present
- Defaults to Nominal.
- IPMI_Power_Unit_Redundancy
- The following states correspond to Power Unit sensor events
that report on redundancy.
- IPMI_Power_Unit_Redundancy_Fully_Redundant
- Defaults to Nominal/Nominal.
- IPMI_Power_Unit_Redundancy_Redundancy_Lost
- Defaults to Critical/Warning.
- IPMI_Power_Unit_Redundancy_Redundancy_Degraded
- Defaults to Warning/Warning.
- IPMI_Power_Unit_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant
- Defaults to Critical/Warning.
- IPMI_Power_Unit_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy
- Defaults to Critical/Warning.
- IPMI_Power_Unit_Redundancy_Non_Redundant_Insufficient_Resources
- Defaults to Critical/Warning.
- IPMI_Power_Unit_Redundancy_Redundancy_Degraded_From_Fully_Redundant
- Defaults to Warning/Warning.
- IPMI_Power_Unit_Redundancy_Redundancy_Degraded_From_Non_Redundant
- Defaults to Warning/Warning.
- IPMI_Cooling_Device_Redundancy
- The following states correspond to Cooling Device sensor
events that report on redundancy.
- IPMI_Cooling_Device_Redundancy_Fully_Redundant
- Defaults to Nominal/Nominal.
- IPMI_Cooling_Device_Redundancy_Redundancy_Lost
- Defaults to Critical/Warning.
- IPMI_Cooling_Device_Redundancy_Redundancy_Degraded
- Defaults to Warning/Warning.
- IPMI_Cooling_Device_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant
- Defaults to Critical/Warning.
- IPMI_Cooling_Device_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy
- Defaults to Critical/Warning.
- IPMI_Cooling_Device_Redundancy_Non_Redundant_Insufficient_Resources
- Defaults to Critical/Warning.
- IPMI_Cooling_Device_Redundancy_Redundancy_Degraded_From_Fully_Redundant
- Defaults to Warning/Warning.
- IPMI_Cooling_Device_Redundancy_Redundancy_Degraded_From_Non_Redundant
- Defaults to Warning/Warning.
- IPMI_Memory
- The following states correspond to Memory sensor events w/
Memory specific output events.
- IPMI_Memory_Correctable_Memory_Error
- Defaults to Warning.
- IPMI_Memory_Uncorrectable_Memory_Error
- Defaults to Critical.
- IPMI_Memory_Parity
- Defaults to Critical.
- IPMI_Memory_Memory_Scrub_Failed
- Defaults to Critical.
- IPMI_Memory_Memory_Device_Disabled
- Defaults to Critical.
- IPMI_Memory_Correctable_Memory_Error_Logging_Limit_Reached
- Defaults to Warning.
- IPMI_Memory_Presence_Detected
- Defaults to Nominal.
- IPMI_Memory_Configuration_Error
- Defaults to Critical.
- IPMI_Memory_Spare
- Defaults to Nominal.
- IPMI_Memory_Memory_Automatically_Throttled
- Defaults to Warning.
- IPMI_Memory_Critical_Overtemperature
- Defaults to Critical.
- IPMI_Memory_Redundancy
- The following states correspond to Memory sensor events
that report on redundancy.
- IPMI_Memory_Redundancy_Fully_Redundant
- Defaults to Nominal/Nominal.
- IPMI_Memory_Redundancy_Redundancy_Lost
- Defaults to Critical/Warning.
- IPMI_Memory_Redundancy_Redundancy_Degraded
- Defaults to Warning/Warning.
- IPMI_Memory_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant
- Defaults to Critical/Warning.
- IPMI_Memory_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy
- Defaults to Critical/Warning.
- IPMI_Memory_Redundancy_Non_Redundant_Insufficient_Resources
- Defaults to Critical/Warning.
- IPMI_Memory_Redundancy_Redundancy_Degraded_From_Fully_Redundant
- Defaults to Warning/Warning.
- IPMI_Memory_Redundancy_Redundancy_Degraded_From_Non_Redundant
- Defaults to Warning/Warning.
- IPMI_Drive_Slot
- The following states correspond to Drive Slot sensor events
w/ Drive Slot specific output events.
- IPMI_Drive_Slot_Drive_Presence
- Defaults to Nominal.
- IPMI_Drive_Slot_Drive_Fault
- Defaults to Critical.
- IPMI_Drive_Slot_Predictive_Failure
- Defaults to Critical.
- IPMI_Drive_Slot_Hot_Spare
- Defaults to Nominal.
- IPMI_Drive_Slot_Consistency_Check_Parity_Check_In_Progress
- Defaults to Nominal.
- IPMI_Drive_Slot_In_Critical_Array
- Defaults to Critical.
- IPMI_Drive_Slot_In_Failed_Array
- Defaults to Critical.
- IPMI_Drive_Slot_Rebuild_Remap_In_Progress
- Defaults to Nominal.
- IPMI_Drive_Slot_Rebuild_Remap_Aborted
- Defaults to Critical.
- IPMI_Drive_Slot_State
- The following states correspond to Drive Slot sensor events
that report an assertion or deassertion.
- IPMI_Drive_Slot_State_Deasserted
- Defaults to Warning.
- IPMI_Drive_Slot_State_Asserted
- Defaults to Nominal.
- IPMI_Drive_Slot_Predictive_Failure
- The following states correspond to Drive_Slot sensor events
that report a predictive failure assertion or deassertion.
- IPMI_Drive_Slot_Predictive_Failure_Deasserted
- Defaults to Nominal.
- IPMI_Drive_Slot_Predictive_Failure_Asserted
- Defaults to Critical.
- IPMI_Drive_Slot_Device_Present
- The following states correspond to Drive Slot sensor events
that report on device installation.
- IPMI_Drive_Slot_Device_Present_Device_Removed_Device_Absent
- Defaults to Critical.
- IPMI_Drive_Slot_Device_Present_Device_Inserted_Device_Present
- Defaults to Nominal.
- IPMI_System_Firmware_Progress
- The following states correspond to System Firmware Progress
sensor events w/ System Firmware Progress specific output events.
- IPMI_System_Firmware_Progress_System_Firmware_Error
- Defaults to Critical.
- IPMI_System_Firmware_Progress_System_Firmware_Hang
- Defaults to Critical.
- IPMI_System_Firmware_Progress_System_Firmware_Progress
- Defaults to Nominal.
- IPMI_Event_Logging_Disabled
- The following states correspond to Event Logging Disabled
sensor events w/
- IPMI_Event_Logging_Disabled_Correctable_Memory_Error_Logging_Disabled
- Defaults to Critical.
- IPMI_Event_Logging_Disabled_Event_Type_Logging_Disabled
- Defaults to Critical.
- IPMI_Event_Logging_Disabled_Log_Area_Reset_Cleared
- Defaults to Nominal.
- IPMI_Event_Logging_Disabled_All_Event_Logging_Disabled
- Defaults to Critical.
- IPMI_Event_Logging_Disabled_SEL_Full
- Defaults to Critical.
- IPMI_Event_Logging_Disabled_SEL_Almost_Full
- Defaults to Warning.
- IPMI_Event_Logging_Disabled_Correctable_Machine_Check_Error_Logging_Disabled
- Defaults to Critical.
- IPMI_System_Event
- The following states correspond to System Event sensor
events w/ System Event specific output events.
- IPMI_System_Event_System_Reconfigured
- Defaults to Warning.
- IPMI_System_Event_OEM_System_Boot_Event
- Defaults to Nominal.
- IPMI_System_Event_Undetermined_System_Hardware_Failure
- Defaults to Critical.
- IPMI_System_Event_Entry_Added_To_Auxiliary_Log
- Defaults to Nominal.
- IPMI_System_Event_PEF_Action
- Defaults to Nominal.
- IPMI_System_Event_Timestamp_Clock_Sync
- Defaults to Warning.
- IPMI_System_Event_State
- The following states correspond to System Event sensor
events that report an assertion or deassertion.
- IPMI_System_Event_State_Deasserted
- Defaults to Nominal.
- IPMI_System_Event_State_Asserted
- Defaults to Warning.
- IPMI_Critical_Interrupt
- The following states correspond to Critical Interrupt
sensor events w/ Critical Interrupt specific output events.
- IPMI_Critical_Interrupt_Front_Panel_NMI_Diagnostic_Interrupt
- Defaults to Critical.
- IPMI_Critical_Interrupt_Bus_Timeout
- Defaults to Critical.
- IPMI_Critical_Interrupt_IO_Channel_Check_NMI
- Defaults to Critical.
- IPMI_Critical_Interrupt_Software_NMI
- Defaults to Warning.
- IPMI_Critical_Interrupt_PCI_PERR
- Defaults to Critical.
- IPMI_Critical_Interrupt_PCI_SERR
- Defaults to Critical.
- IPMI_Critical_Interrupt_EISA_Fail_Safe_Timeout
- Defaults to Critical.
- IPMI_Critical_Interrupt_Bus_Correctable_Error
- Defaults to Warning.
- IPMI_Critical_Interrupt_Bus_Uncorrectable_Error
- Defaults to Critical.
- IPMI_Critical_Interrupt_Fatal_NMI
- Defaults to Critical.
- IPMI_Critical_Interrupt_Bus_Fatal_Error
- Defaults to Critical.
IPMI_Critical_Interrupt_Bus_Degraded Defaults to Warning.
- IPMI_Button_Switch
- The following states correspond to Button/Switch sensor
events w/ Button/Switch specific output events.
- IPMI_Button_Switch_Power_Button_Pressed
- Defaults to Info.
- IPMI_Button_Switch_Sleep_Button_Pressed
- Defaults to Info.
- IPMI_Button_Switch_Reset_Button_Pressed
- Defaults to Info.
- IPMI_Button_Switch_FRU_Latch_Open
- Defaults to Warning.
- IPMI_Button_Switch_FRU_Service_Request_Button
- Defaults to Warning.
- IPMI_Button_Switch_State
- The following states correspond to Button/Switch sensor
events that report an assertion or deassertion.
- IPMI_Button_Switch_State_Deasserted
- Defaults to Nominal.
- IPMI_Button_Switch_State_Asserted
- Defaults to Nominal.
- IPMI_Module_Board_State
- The following states correspond to Module/Board sensor
events that report an assertion or deassertion.
- IPMI_Module_Board_State_Deasserted
- Defaults to Nominal.
- IPMI_Module_Board_State_Asserted
- Defaults to Critical.
- IPMI_Module_Board_Device_Present
- The following states correspond to Module/Board sensor
events that report on device installation.
- IPMI_Module_Board_Device_Present_Device_Removed_Device_Absent
- Defaults to Critical.
- IPMI_Module_Board_Device_Present_Device_Inserted_Device_Present
- Defaults to Nominal.
- IPMI_Chip_Set
- The following states correspond to Chip Set sensor events
w/ Chip Set specific output events.
- IPMI_Chip_Set_Soft_Power_Control_Failure
- Defaults to Critical.
- IPMI_Chip_Set_Thermal_Trip
- Defaults to Critical.
- IPMI_Chip_Set_Transition_Severity
- The following states correspond to Chip Set sensor events
that report on device severity.
- IPMI_Chip_Set_Transition_Severity_Transition_To_OK
- Defaults to Nominal.
- IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Critical_From_OK
- Defaults to Warning.
- IPMI_Chip_Set_Transition_Severity_Transition_To_Critical_From_Less_Severe
- Defaults to Critical.
- IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
- Defaults to Critical.
- IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
- Defaults to Warning.
- IPMI_Chip_Set_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
- Defaults to Critical.
- IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Recoverable
- Defaults to Critical.
- IPMI_Chip_Set_Transition_Severity_Monitor
- Defaults to Warning.
- IPMI_Chip_Set_Transition_Severity_Informational
- Defaults to Nominal.
- IPMI_Cable_Interconnect
- The following states correspond to Cable/Interconnect
sensor events w/ Cable/Interconnect specific output events.
- IPMI_Cable_Interconnect_Is_Connected
- Defaults to Nominal.
- IPMI_Cable_Interconnect_Configuration_Error
- Defaults to Critical.
- IPMI_Boot_Error
- The following states correspond to Boot Error sensor events
w/ Boot Error specific output events.
- IPMI_Boot_Error_No_Bootable_Media
- Defaults to Critical.
- IPMI_Boot_Error_Non_Bootable_Diskette_Left_In_Drive
- Defaults to Critical.
- IPMI_Boot_Error_PXE_Server_Not_Found
- Defaults to Critical.
- IPMI_Boot_Error_Invalid_Boot_Sector
- Defaults to Critical.
- IPMI_Boot_Error_Timeout_Waiting_For_User_Selection_Of_Boot_Source
- Defaults to Warning.
- IPMI_Slot_Connector
- The following states correspond to Slot Connector sensor
events w/ Slot Connector specific output events.
- IPMI_Slot_Connector_Fault_Status_Asserted
- Defaults to Critical.
- IPMI_Slot_Connector_Identify_Status_Asserted
- Defaults to Warning.
- IPMI_Slot_Connector_Slot_Connector_Device_Installed_Attached
- Defaults to Nominal.
- IPMI_Slot_Connector_Slot_Connector_Ready_For_Device_Installation
- Defaults to Nominal.
- IPMI_Slot_Connector_Slot_Connector_Ready_For_Device_Removal
- Defaults to Nominal.
- IPMI_Slot_Connector_Slot_Power_Is_Off
- Defaults to Nominal.
- IPMI_Slot_Connector_Slot_Connector_Device_Removal_Request
- Defaults to Warning.
- IPMI_Slot_Connector_Interlock_Asserted
- Defaults to Warning.
- IPMI_Slot_Connector_Slot_Is_Disabled
- Defaults to Warning.
- IPMI_Slot_Connector_Slot_Holds_Spare_Device
- Defaults to Nominal.
- IPMI_System_ACPI_Power_State
- IPMI_System_ACPI_Power_State_S0_G0
- Defaults to Nominal.
- IPMI_System_ACPI_Power_State_S1
- Defaults to Nominal.
- IPMI_System_ACPI_Power_State_S2
- Defaults to Nominal.
- IPMI_System_ACPI_Power_State_S3
- Defaults to Nominal.
- IPMI_System_ACPI_Power_State_S4
- Defaults to Nominal.
- IPMI_System_ACPI_Power_State_S5_G2
- Defaults to Nominal.
- IPMI_System_ACPI_Power_State_S4_S5_Soft_Off
- Defaults to Nominal.
- IPMI_System_ACPI_Power_State_G3_Mechanical_Off
- Defaults to Nominal.
- IPMI_System_ACPI_Power_State_Sleeping_in_an_S1_S2_or_S3_States
- Defaults to Nominal.
- IPMI_System_ACPI_Power_State_G1_Sleeping
- Defaults to Nominal.
- IPMI_System_ACPI_Power_State_S5_Entered_By_Override
- Defaults to Nominal.
- IPMI_System_ACPI_Power_State_Legacy_ON_State
- Defaults to Nominal.
- IPMI_System_ACPI_Power_State_Legacy_OFF_State
- Defaults to Nominal.
- IPMI_System_ACPI_Power_State_Unspecified
- Defaults to Critical.
- IPMI_System_ACPI_Power_State_Unknown
- Defaults to Critical.
- IPMI_Watchdog2
- The following states correspond to Watchdog 2 sensor events
w/ Watchdog 2 specific output events.
- IPMI_Watchdog2_Timer_Expired
- Defaults to Warning.
- IPMI_Watchdog2_Hard_Reset
- Defaults to Critical.
- IPMI_Watchdog2_Power_Down
- Defaults to Critical.
- IPMI_Watchdog2_Power_Cycle
- Defaults to Critical.
- IPMI_Watchdog2_Reserved1
- Defaults to Nominal.
- IPMI_Watchdog2_Reserved2
- Defaults to Nominal.
- IPMI_Watchdog2_Reserved3
- Defaults to Nominal.
- IPMI_Watchdog2_Reserved4
- Defaults to Nominal.
- IPMI_Watchdog2_Timer_Interrupt
- Defaults to Warning.
- IPMI_Entity_Presence
- The following states correspond to Entity Presence sensor
events w/ Entity Presence specific output events.
- IPMI_Entity_Presence_Entity_Present
- Defaults to Nominal.
- IPMI_Entity_Presence_Entity_Absent
- Defaults to Critical.
- IPMI_Entity_Presence_Entity_Disabled
- Defaults to Critical.
- IPMI_Entity_Presence_Device_Present
- The following states correspond to Entity Presence sensor
events that report on device installation.
- IPMI_Entity_Presence_Device_Present_Device_Removed_Device_Absent
- Defaults to Nominal.
- IPMI_Entity_Presence_Device_Present_Device_Inserted_Device_Present
- Defaults to Nominal.
- IPMI_Management_Subsystem_Health
- The following states correspond to Management Subsystem
Health sensor events w/ Management Subsystem Health specific output
events.
- IPMI_Management_Subsystem_Health_Sensor_Access_Degraded_Or_Unavailable
- Defaults to Critical.
- IPMI_Management_Subsystem_Health_Controller_Access_Degraded_Or_Unavailable
- Defaults to Critical.
- IPMI_Management_Subsystem_Health_Management_Controller_Off_Line
- Defaults to Critical.
- IPMI_Management_Subsystem_Health_Management_Controller_Unavailable
- Defaults to Critical.
- IPMI_Management_Subsystem_Health_Sensor_Failure
- Defaults to Critical.
- IPMI_Management_Subsystem_Health_FRU_Failure
- Defaults to Critical.
- IPMI_Battery
- The following states correspond to Battery sensor events w/
Battery specific output events.
- IPMI_Battery_Battery_Low
- Defaults to Warning.
- IPMI_Battery_Battery_Failed
- Defaults to Critical.
- IPMI_Battery_Battery_Presence_Detected
- Defaults to Nominal.
- IPMI_Session_Audit
- The following states correspond to Session Audit sensor
events w/ Session Audit specific output events.
- IPMI_Session_Audit_Session_Activated
- Defaults to Nominal.
- IPMI_Session_Audit_Session_Deactivated
- Defaults to Nominal.
- IIPMI_Session_Audit_Invalid_Username_Or_Password
- Defaults to Warning.
- IPMI_Session_Audit_Invalid_Password_Disable
- Defaults to Critical.
- IPMI_FRU_State
- The following states correspond to FRU State sensor events
w/ FRU State specific output events.
- IPMI_FRU_State_FRU_Not_Installed
- Defaults to Critical.
- IPMI_FRU_State_FRU_Inactive
- Defaults to Critical.
- IPMI_FRU_State_FRU_Activation_Requested
- Defaults to Warning.
- IPMI_FRU_State_FRU_Activation_In_Progress
- Defaults to Warning.
- IPMI_FRU_State_FRU_Active
- Defaults to Nominal.
- IPMI_FRU_State_FRU_Deactivation_Requested
- Defaults to Warning.
- IPMI_FRU_State_FRU_Deactivation_In_Progress
- Defaults to Warning.
- IPMI_FRU_State_FRU_Communication_Lost
- Defaults to Critical.
- IPMI_OEM
- The following configuration options can be used to
configure OEM system event log events. Interpretations rules for a
specific combination of Manufacturer-ID, Product-ID, and
Record-Type, are iterated through and the worst resulting sensor
state is returned (i.e. Warning < Nominal, Critical < Warning). If
no match is found, no state is returned for the OEM event. For each of the
configuration options below, <Manufacturer-ID> is the numeric
IANA manufacturer ID for the manufacturer in question. The
<Product-ID> is one or more numeric IDs representing the
manufacturer's product. The <Product-ID> can be listed as a
single numeric number (e.g. 1234), a range of IDs separated by a dash
(e.g. 12-20), or a list of specific product IDs separted by a plus (e.g.
12+19+22). Both the Manufacturer-ID and Product-ID can be
found using bmc-info(8). Multiple <Manufacturer-ID>
and <Product-ID> pairs can be input separated by commas.
- IPMI_OEM_Sensor_System_Event_Record
<Manufacturer-ID>: <Product-ID>,...
Event-Reading-Type-Code Sensor-Type Event-Direction
EventData1 EventData2 EventData3 State
- IPMI_OEM_System_Event_Record can be used to
configure a state interpretation for a specific Manufacturer-ID,
Product-ID, Event-Reading-Type-Code, and Sensor-Type
combination, and a specific Event-Direction, EventData1,
EventData2, and EventData3. The Event-Direction field
must specify Assertion, Deassertion, or ANY. Each of
the EventData fields must specify a hex byte to match or the
keyword ANY to match anything. The Event-Reading-Type-Code
and Sensor-Type need not be OEM types. They may be non-OEM types
and used to provide interpretation rules for sensors that may be behaving
outside the standard of the IPMI specification.
- IPMI_OEM_Timestamped_Record
<Manufacturer-ID>: <Product-ID>,...
Record-Type OEMDATA1 OEMDATA2 OEMDATA3
OEMDATA4 OEMDATA5 OEMDATA6 State
- IPMI_OEM_Timestamped_Record can be used to configure
an interpretation for a specific Manufacturer-ID,
Product-ID, Record-Type, and OEM data combination. The
Record-Type must be a legal record type for OEM Timestamped Records
(currently 0xC0-0xDF). Each of the OEMDATA fields must specify a
hex byte to match or the keyword ANY to match anything.
- IPMI_OEM_Non_Timestamped_Record
<Manufacturer-ID>: <Product-ID>,...
Record-Type OEMDATA1 OEMDATA2 OEMDATA3
OEMDATA4 OEMDATA5 OEMDATA6 OEMDATA7
OEMDATA8 OEMDATA9 OEMDATA10 OEMDATA11
OEMDATA12 OEMDATA13 State
- IPMI_OEM_Non_Timestamped_Record can be used to
configure an interpretation for a specific Manufacturer-ID,
Product-ID, Record-Type, and OEM data combination. The
Record-Type must be a legal record type for OEM Non-Timestamped
Records (currently 0xEO-0xFF). Each of the OEMDATA fields must
specify a hex byte to match or the keyword ANY to match
anything.
FILES¶
/etc/freeipmi//freeipmi_interpret_sel.conf
REPORTING BUGS¶
Report bugs to <freeipmi-users@gnu.org> or <freeipmi-devel@gnu.org>.
COPYRIGHT¶
Copyright (C) 2007-2012 Lawrence Livermore National Security, LLC.
This library is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free Software
Foundation; either version 3 of the License, or (at your option) any later
version.
SEE ALSO¶
libfreeipmi(3),
libipmimonitoring(3),
ipmi-sel(8)
http://www.gnu.org/software/freeipmi/