other versions
- wheezy 0.82-1.1
e2undel(8) | System Manager's Manual | e2undel(8) |
NAME¶
e2undel — Undelete files on ext2 file systems interactivelySYNOPSIS¶
e2undel -d device -s path [-a] [-t]COPYRIGHT¶
e2undel (C) Oliver Diedrich e2undel@sourceforge.net; file type functionality from the file(1) program, (C) (1987) Ian F. DarwinDESCRIPTION¶
Read this entire section before continuing! This section contains the usage description, for a more technical overview see the NOTES section. Please have a look at the SETUP section if you want to use the `` recover deleted files by name'' feature or if you want to give users other than root the ability to undelete. e2undel searches all inodes marked as deleted on a file system and lists them assorted by owner and time of deletion. Additionally, it gives you the file size and tries to determine the file type in the way file(1) does. If you did not just delete a whole bunch of files with a 'rm -r *', this information should be helpful to find out which of the deleted files you would like to recover. e2undel does not actually undelete a file (i.e., does not manipulate ext2 internal structures like inode, block bitmap, and inode bitmap). Instead it recovers the data of a deleted file and saves it in a new file. The following general rules should be kept in mind when undeleting files:- •
- The device from which you want to recover deleted files should not be mounted in order to minimize the risk that other processes overwrite data of deleted files.
- •
- If the device is mounted, the directory where you want to save the files should not reside on the same device. If it does, there is a chance the recently restored files overwrite deleted data.
- •
- The sooner as you try to recover a deleted file the higher are chances that you will succeed.
OPTIONS¶
e2undel accepts the following parameters:- -d device
- the file system where to look for deleted files (e.g. /dev/hdb1 for the 1st partition on the 2nd IDE drive)
- -s path
- the directory where recovered files are saved.
- -a
- work on all files, not only on those listed in undel log file (you need this if you don't use the undel library)
- -t
- try to determine type of deleted files without names, works only with -a.
- -l
- list all non-redundant entries in the libundel log file, sorted by file systems. Redundant entries can exist after using the undel library for some time if several files are stored and deleted on the same inode. You can use the tool compactlog(8) to remove these redundant entries if the log file grows too heavy.
EXAMPLE¶
An example: e2undel -d /dev/hdb2 -s /tmp tries to restore deleted files on /dev/hdb2 and saves them in /tmp. Deleted files with no name entry in the log file are ignored.IMPORTANT¶
As soon as you realize you lost data, unmount the partition as soon as possible.BUGS¶
- •
- missing pager functionality when displaying the list of deleted files, you need a terminal with a scrollback buffer
- •
- no direct way to recover a file by name
- •
- some minor stuff, see BUGS (on Debian/GNU Linux system this file can be found in /usr/share/doc/e2undel).
SETUP¶
Included in the e2undel package is the undel library. This package is currently not build for Debian/GNU Linux. This library, loaded by the $LD_PRELOAD mechanism, hooks into the system calls unlink(2) and remove(3). libundel logs the device (like /dev/hdb7 etc.), the inode number, and the name of each file that is deleted by these system calls in a log file ( /var/e2undel/e2undel by default). With this information, it is possible to recover deleted files by name. Of course, e2undel also works without the undel library (as outlined above), but you lose the functionality to recover deleted files by name if you don't use libundel -- maybe the best part of this tool. First, if you want to use the `` recover deleted files by name'' feature, you need read access to libundel's log file /var/e2undel/e2undel (and, of course, the undelete library must be installed). When following the installation instructions, read access to the libundel log is granted only for root. If ordinary users are allowed to use e2undel, you must change the rights of the libundel log file accordingly (but read the SECURITY section first !). Of course, you can only recover files by name that were deleted after installing the undelete library. Other deleted files, however, are displayed when using the -a option. Second, you need read access to the raw file system device (like /dev/hdb3 or /dev/sda9). Most distributions grant read access to file system devices only to root and to a special group (called "disk" on Red Hat systems, for example). If other users are allowed to use e2undel, you either have to change the access rights of the device or must add these users to the raw disk access group but first see the SECURITY section below.SECURITY¶
/var/log/e2undel: Each process on the system requires write access to this file. You might consider this before using the undel library on a real multi user system. If you give all users read access to the log (needed to use e2undel), every user can access each deleted file. Access rights and owner of deleted files are ignored. This can be considered a problem in a multi user environment. This also holds true if every user has read access to the file system device files. You can't have the one without the other: If a user can recover deleted files on a file system, he can read all data on this file system. Even without e2undel, a simple dd /dev/xxx reads the complete file system.NOTES¶
If you delete a file stored on an ext2 file system, its data is not instantly lost. What happens is:- •
- ext2 marks the file's data blocks as available in its block bitmap
- •
- ext2 marks the file's inode as available in its inode bitmap
- •
- ext2 sets the deletion time in the file's inode
- •
- ext2 invalidates the file's name in the directory entry
- libundel
- The undelete library uses standard mechanisms provided by the glibc to hook into the system calls. On several systems, there were no problems using the library. However, I did not test the library on a heavily loaded server.
- libundel only works reliable if each process uses the library. Problems arise from programs started by scripts that overwrite the $LD_PRELOAD variable (like Netscape does on some distributions); from processes that are started by init scripts (i.e., before $LD_PRELOAD is set); by using su(1) without a user name. The effect: Not all deleted files are logged which might lead to confusion.
- For example: A process using libundel deletes a file: inode and name are logged in /var/e2undel/e2undel. A new file is stored on this inode and deleted by a process that does not use the undel library. e2undel now finds this inode deleted, finds the (older) entry in the libundel log, and concludes that both belong together. When recovering the file, however, the recent information in the deleted inode will be restored -- the data of the newer file is recovered under the name of the older one. This can be somewhat confusing.
- e2undel
- The program does not manipulate any internal ext2 structures, requires only read access to the device it works on, and uses Ted Ts'o's ext2fs library for all ext2 low level operations. I never observed any damage to a file system treated with e2undel.