NAME¶
DVBlast - Simple and powerful dvb streaming application
SYNOPSIS¶
dvblast [
-q] [
-c <config_file>] [
-r
<remote_socket>] [
-t <ttl>] [
-o
<SSRC_IP>] [
-i <RT_priority>] [
-a
<adapter>] [
-n <frontend_number>] [
-S
<diseqc>] [
-f <frequency>] [
-D
<src_host>[:<src_port>][[@<src_mcast>][:<port>]][/<opts>]]
[
-A <ASI_adapter>] [
-s <symbol_rate>] [
-v
<0|13|18>] [
-p] [
-b <bandwidth>] [
-I
<inversion>] [
-F <fec_inner>] [
-m
<modulation>] [
-R <rolloff>] [
-P <pilot>]
[
-K <fec_lp>] [
-G <guard_interval>] [
-H
<hierarchy>] [
-X <transmission>] [
-O
<lock_timeout>] [
-u] [
-w] [
-U] [
-L
<latency>] [
-E <retention>] [
-d
<dest_IP>[<:port>][/<opts>]] [
-z] [
-C]
[
-e] [
-M <network_name>] [
-N <network_ID>]
[
-T] [
-j <system_charset>] [
-W] [
-Y]
[
-l] [
-g <logger ident>] [
-Z <mrtg_file>]
[
-V] [
-h] [
-J <DVB_charset>] [
-B
<provider_name>] [
-Q <quit_timeout>] [
-x
<text|xml>]
DESCRIPTION¶
DVBlast is a simple and powerful streaming application based on the linux-dvb
API. It opens a DVB device, tunes it, places PID filters, configures a CAM
module, and demultiplexes the packets to several RTP outputs.
DVBlast is designed to be the core of a custom IRD or CID, based on a PC with
Linux-supported DVB cards.
DVBlast does not do any kind of processing on the elementary streams, such as
transcoding, PID remapping or remultiplexing. it does not stream from plain
files, only DVB devices. If you were looking for these features, switch to
VLC.
OPTIONS¶
- -a, --adapter <adapter>
- Address of the adapter
- -A, --asi-adapter
- Read packets from an ASI adapter (0-n)
- -b, --bandwidth <bandwidth>
- Frontend bandwidth
- -B, --provider-name <name>
- Service provider name to declare in the SDT. If you want to
change provider name per output use /srvprovider= output option in the
config file.
- -c, --config-file <config file>
- Use the given configuration file
- -C, --dvb-compliance
- Pass through or build the mandatory DVB tables
- -d, --duplicate <dest IP:port>
- Duplicate all received packets to a given destination
- -D, --rtp-input
- Read packets from a multicast address instead of a DVB
card
- -W, --emm-passthrough
- Enable EMM pass through (CA system data)
- -Y, --ecm-passthrough
- Enable ECM pass through (CA program data)
- -e, --epg-passthrough
- Enable EPG pass through (EIT data)
- -E, --retention <retention>
- Maximum retention allowed between input and output
(default: 40 ms)
- -f, --frequency <frequency>
- Frontend frequency
- -F, --fec-inner <FEC>
- Forward Error Correction used by satellite (FEC Inner)
DVB-S2 0|12|23|34|35|56|78|89|910|999 (default auto: 999)
- -G, --guard <interval>
- DVB-T guard interval
DVB-T 32 (1/32)|16 (1/16)|8 (1/8)|4 (1/4)|-1 (auto, default)
- -h, --help
- Print the help message
- -H, --hierarchy <hierarchy>
- DVB-T hierarchy (0, 1, 2, 4 or -1 auto, default)
- -i, --priority <RT priority>
- Real time priority
- -I, --inversion <inversion>
- Inversion (-1 auto, 0 off, 1 on)
- -j, --system-charset <charset>
- Character set used for printing messages (default
UTF-8)
- -J, --dvb-charset <charset>
- Character set used in output DVB tables (default
ISO_8859-1)
- -K, --fec-lp
- DVB-T low priority FEC (default auto)
- -l, --logger
- Send messages to syslog instead of stderr
- -g, --logger-ident <logger_ident>
- Set the program name that will appear in syslog (default:
dvblast /the executable name/).
- -L, --latency <latency>
- Maximum latency allowed between input and output (default:
100 ms)
- -m, --modulation
- Modulation
DVB-C qpsk|qam_16|qam_32|qam_64|qam_128|qam_256 (default qam_auto)
DVB-T qam_16|qam_32|qam_64|qam_128|qam_256 (default qam_auto)
DVB-S2 qpsk|psk_8 (default legacy DVB-S)
- -M, --network-name <name>
- DVB network name to declare in the NIT
- -n, --frontend-number <frontend
number>
- The frontend number
- -N, --network-id <ID>
- DVB network ID to declare in the NIT
- -o, --rtp-output <SSRC IP>
- RTP output IP
- -O, --lock-timeout <timeout>
- Timeout for the lock operation (in ms)
- -p, --force-pulse
- Force 22kHz pulses for high-band selection (DVB-S)
- -P, --pilot
- DVB-S2 Pilot (-1 auto, 0 off, 1 on)
- -q, --quiet
- Be quiet (less verbosity, repeat or use number for even
quieter)
- -Q, --quit-timeout <delay>
- When locked, quit after this delay (in ms), or after the
first lock timeout
- -r, --remote-socket <remote
socket>
- Remote socket to use
- -R, --rolloff <rolloff>
- Rolloff value to use
DVB-S2 35=0.35|25=0.25|20=0.20|0=AUTO (default: 35)
- -s, --symbol-rate <symbol rate>
- Symbole rate
- -S, --diseqc <diseqc>
- Satellite number for diseqc (0: no diseqc, 1-4, A or
B)
- -t, --ttl <ttl>
- Time-To-Live of the multicast stream
- -T, --unique-ts-id
- Generate unique TS ID for each program
- -u, --budget-mode
- Turn on budget mode (no hardware PID filtering)
- -U, --udp
- Use raw UDP rather than RTP (required by some IPTV set top
boxes)
- -v, --voltage <0|13|18>
- Voltage to apply to the LNB (QPSK)
- -V, --version
- Only display the version
- -w, --select-pmts
- set a PID filter on all PMTs
- -x, --print
- Print interesting events on stdout in a given format
- -X, --transmission <transmission>
- DVB-T transmission (2, 4, 8 or -1 auto, default
- -z, --any-type
- pass through all ESs from the PMT, of any type
- -Z, --mrtg-file <mrtg_file>
- Every 10 seconds log statistics in <mrtg_file>. The
file has 4 numbers in it and the format is: <passed_bytes>
<error_packets> <packets_with_seq_errors>
<scrambled_packets>
SEE ALSO¶
Read the README file for more information about the configuration of dvblast.
AUTHORS¶
Writen by Marian Ďurkovič, Andy Gatward, Christophe Massiot and
Jean-Paul Saman
LICENSE¶
This program is free software; you can redistribute it and/or modify it under
the terms of version 2 of the GNU General Public License as published by the
Free Software Foundation.