NOMBRE¶
amuleweb - servidor web de aMule
SINOPSIS¶
[
-h <host>] [
-p <port>] [
-P
<password>] [
-f <path>] [
-l
<lang>] [
-t <name>] [
-s
<port>] [
-U <port>] [
-A
<password>] [
-G <password>]
[
--create-config-from=
<path>]
[
--amule-config-file=
<path>]
DESCRIPCIÓN¶
amuleweb manages your access to amule through a web browser. You can
start amuleweb together with
amule(1), or separately, any time later.
Options can be specified via command-line or via config-file. Command-line
options take precedence over config-file options.
- [ -h <host>,
--host=<host> ]
- Host donde se está ejecutando aMule. (por defecto:
localhost). <host> debe ser o una dirección IP o
un nombre DNS
- [ -p <port>,
--port=<port> ]
- Puerto de conexión externa de aMule, puesto en
Opciones->Controles Remotos (por defecto: 4712)
- [ -P <password>,
--password=<password> ]
- Contraseña de conexiones externas
- [ -f <path>,
--config-file=<path> ]
- Usar la configuración dada por el archivo. El archivo
de configuración por defecto es ~/.aMule/remote.conf
- No mostrar nada por la salida estándar
- Modo Extendido - muestra también los mensajes de
depuración.
- [ -l <lang>,
--locale=<lang> ]
- Selecciona el idioma del programa. Ver la sección
NOTAS para la descripción del parámetro del
<lang>.
- Escribe opciones de la línea de comando al archivo de
configuración y
- termina.
- [ -t <name>,
--template=<name> ]
- Loads the template named <name>. See the
SKIN SUPPORT section for details.
- [ -s <port>,
--server-port=<port> ]
- Webserver's HTTP port. This is the port you must point your
browser to (default: 4711).
-
Habilitar UPnP.
- [ -U <port>, --upnp-port
<port> ]
- Puerto UPnP.
- Enables using gzip compression in HTTP traffic to save
bandwidth.
- Deshabilitar la compresión gzip (esto es por
defecto).
- [ -A <passwd>,
--admin-pass=<passwd> ]
- Contraseña de acceso completo al servidor web.
- [ -G <passwd>,
--guest-pass=<passwd> ]
- Contraseña de invitado al servidor web.
- Permitir acceso invitado.
- Deniega el acceso invitado (defecto)
- Load/save webserver settings from/to remote aMule. This
causes amuleweb to
- ignore command-line and config-file settings, and load them
from aMule. When saving preferences none will be written to the config
file, but to aMule. (Of course, this works only for those settings that
can be set in aMule's Preferences->Remote Controls.)
- Deshabilitar interprete PHP (obsoleto)
- Recompilar páginas PHP en cada solicitud.
- [ --create-config-from=<path>
]
- Crear archivo de configuración basado en
<path>, el cual debe apuntar a un archivo de
configuración válido, y entonces termina.
- Imprime una breve descripción de uso.
- Mostrar el número de la versión actual.
- [ --amule-config-file=<path>
]
- aMule config file path. DO NOT USE DIRECTLY! aMule
uses this option when starting amuleweb at aMule startup. This option
causes all other command-line and config-file settings to be ignored,
preferences to be read from the given config file, and also implies the
-q -L options.
NOTAS¶
Rutas¶
Todas las opciones que tengan
<path> como valor, si
path
contiene un directorio sin part (p.e. solo un archivo normal), entones se
tomará el directorio de la configuración,
~/.aMule.
Lenguajes¶
The
<lang> parameter for the
-l option has the following
form:
lang[
_LANG][
.encoding][
@modifier]
where
lang is the primary language,
LANG is a
sublanguage/territory,
encoding is the character set to use and
modifier allows the user to select a specific instance of localization
data within a single category.
Por ejemplo, las siguientes cadenas son válidas:
Though all the above strings are accepted as valid language definitions,
encoding and
modifier are yet unused.
In addition to the format above, you can also specify full language names in
English - so
-l german is also valid and is equal to
-l de_DE.
When no locale is defined, either on command-line or in config file, system
default language will be used.
SOPORTE TEMAS.¶
amuleweb is capable of displaying information in different skins. These
skins are called templates, and you can make amuleweb load a specific template
via the
-t command line option. Templates are searched in two places:
first in
~/.aMule/webserver/ and then in
/usr/share/amule/webserver/ if you installed with --prefix=/usr.
Each template must be in a subdirectory of the template name, and this directory
must contain all files the template needs.
ARCHIVOS¶
~/.aMule/remote.conf
~/.aMule/webserver/
$(pkgdatadir)/webserver/
EJEMPLO¶
Normalmente amuleweb se ejecutara primero como:
amuleweb -h hostname -p ECport -P
ECpassword -s HTTPport -A AdminPassword
-w
o
amuleweb
--create-config-from=
/home/usuario/.aMule/amule.conf
Esto guardará las opciones en
$HOME/.aMule/remote.conf, y
después sólo tiene que escribir:
Por supuesto, puede especificar las opciones en el ejemplo de la primera linea,
y también puede omitirlo.
Por favor informa de fallos ya sea en nuestro foro (
http://forum.amule.org/), o en nuestro bugtracker (
http://bugs.amule.org/). Por favor no informe de fallos por correo, ni
en nuestras listas, ni directamente al correo de algun miembro del equipo.
COPYRIGHT¶
aMule y todas las demás utilidades relacionadas son distribuidas bajo la
GNU General Public License.
VEASE TAMBIEN¶
AUTOR¶
Esta página de manualfue escrita por Vollstrecker
<amule@vollstreckernet.de>