NAME¶
envy24control - GUI control tool for Envy24 (ice1712) based soundcards, under
ALSA.
SYNOPSIS¶
envy24control [
-c card-number] [
-D control-name] [
-o
0-num DACs max 8] [
-i 0-num ADCs max 8] [
-p 0-8] [
-s
0-2] [
-f <profiles file name>] [
-v] [<profile
number>|<profile name>] [
-m midi-channel] [
-M]
[
-w window-width] [
-t 0-9]
DESCRIPTION¶
envy24control allows control of the digital mixer, channel gains and
other hardware settings for sound cards based on the ice1712 chipset (Midiman
Delta series, Terratec EWS and EWX series). It also displays a level meter for
each input and output channel.
INVOKING¶
envy24control [
-c card-number] [
-D control-name] [
-o
0-num DACs max 8] [
-i 0-num ADCs max 8] [
-p 0-8] [
-s
0-2] [
-f <profiles file name>] [
-v] [<profile
number>|<profile name>] [
-m midi-channel] [
-M]
[
-w window-width] [
-t 0-9]
- If no control-name is given, then the first sound card is
used.
-
Options¶
- -c card-number
- Use the card specified by card-number rather than the first
card. This is equivalent with -Dhw:n option where n is the
card number.
- -D control-name
- Use the card specified by control-name rather than the
first card, normally this will be of the form hw: n where n
is the sound card number (zero-based). This is only needed if you have
more than one Envy24-based card or if your Envy24 card is not configured
as the first card in your ALSA driver setup.
- -o outputs
- Limit number of analog line outputs to display. Default is
the number of DACs in the driver specification. Maximum is 8. The number
of analog output lines can only be reduced from the available number of
output lines.
- -i inputs
- Limit number of analog line inputs to display. Default is
the number of ADCs in the driver specification. Maximum is 8. The number
of analog input lines can only be reduced from the available number of
input lines.
- -p pcm outputs
- Limit number of PCM outputs to display. Default is 8.
- -s spdif inputs/outputs
- Limit number of SPDIF inputs/outputs to display. Default is
2.
- -f name and path of the profiles file name.
- From/to this file will envy24control read/write the alsactl
settings. If is not given DEFAULT_PROFILERC or for restore if
DEFAULT_PROFILERC doesn't exists SYS_PROFILERC will be used.
- -v view spdif playback channels in the mixer.
- It is not possible to manage something (muting, volume
levels). It is only to view the levelmeters. Default is no view of spdif
playback channels in the mixer.
- -m midi-channel
- Use MIDI controller values to control the Faders in the
mixer view. The application will react to controllers on channel
midi-channel and send controllers on this channel when the user moves the
GUI sliders.
- -M
- Use an enhanced mapping from midi controller values to db
sliders.
- -w window-width
- Specify the initial width of the envy24control window.
Using window-width in the range 0-20 specifies approx number of mixer
channels visible. Values >20 are interpreted as screen pixels.
- -t tall-equal mixer heights
- Using -t 1 enlarges the channel mixers to the same
height as the digital mixer. With values >1 the height of all mixers is
increased in stages. -t 0 is the default, set for minimum window
height.
SEE ALSO¶
alsamixer(1), amixer(1), gamix(1)
AUTHOR¶
envy24control is by Jaroslav Kysela <perex@perex.cz> This document
is by James Tappin <james@xena.uklinux.net>. Updated by Dirk Kalis
<dirk.kalis@t-online.de>. Options
-w and -t added
Alan Horstmann <gineera@aspect135.co.uk>