NAME¶
tshark - Dump and analyze network traffic
SYNOPSIS¶
tshark [
-2 ] [
-a <capture autostop condition> ] ...
[
-b <capture ring buffer option>] ...
[
-B <capture buffer size> ]
[
-c <capture packet count> ] [
-C <configuration profile> ] [
-d <layer type>==<selector>,<decode-as protocol> ]
[
-D ] [
-e <field> ] [
-E <field print option> ] [
-f <capture filter> ] [
-F <file format> ] [
-g ]
[
-h ] [
-H <input hosts file> ] [
-i <capture interface>|- ] [
-I ] [
-K <keytab> ] [
-l ] [
-L ] [
-n ] [
-N <name resolving flags> ] [
-o <preference setting> ] ... [
-O <protocols> ] [
-p ] [
-P ] [
-q ] [
-Q ] [
-r <infile> ] [
-R <Read filter> ] [
-s <capture snaplen> ] [
-S <separator> ] [
-t a|ad|adoy|d|dd|e|r|u|ud|udoy ] [
-T fields|pdml|ps|psml|text ] [
-u <seconds type>] [
-v ] [
-V ] [
-w <outfile>|- ] [
-W <file format option>] [
-x ]
[
-X <eXtension option>] [
-y <capture link type> ] [
-Y <displaY filter> ] [
-z <statistics> ] [
--capture-comment <comment> ]
[ <capture filter> ]
tshark -G
[column-formats|currentprefs|decodes|defaultprefs|fields|ftypes|heuristic-decodes|plugins|protocols|values]
DESCRIPTION¶
TShark is a network protocol analyzer. It lets you capture packet data
from a live network, or read packets from a previously saved capture file,
either printing a decoded form of those packets to the standard output or
writing the packets to a file.
TShark's native capture file format is
pcap format, which is also the format used by
tcpdump and
various other tools.
Without any options set,
TShark will work much like
tcpdump. It
will use the pcap library to capture traffic from the first available network
interface and displays a summary line on stdout for each received packet.
TShark is able to detect, read and write the same capture files that are
supported by
Wireshark. The input file doesn't need a specific filename
extension; the file format and an optional gzip compression will be
automatically detected. Near the beginning of the DESCRIPTION section of
wireshark(1) or
http://www.wireshark.org/docs/man-pages/wireshark.html
<
http://www.wireshark.org/docs/man-pages/wireshark.html> is a detailed
description of the way
Wireshark handles this, which is the same way
Tshark handles this.
Compressed file support uses (and therefore requires) the zlib library. If the
zlib library is not present,
TShark will compile, but will be unable to
read compressed files.
If the
-w option is not specified,
TShark writes to the standard
output the text of a decoded form of the packets it captures or reads. If the
-w option is specified,
TShark writes to the file specified by
that option the raw data of the packets, along with the packets' time stamps.
When writing a decoded form of packets,
TShark writes, by default, a
summary line containing the fields specified by the preferences file (which
are also the fields displayed in the packet list pane in
Wireshark),
although if it's writing packets as it captures them, rather than writing
packets from a saved capture file, it won't show the "frame number"
field. If the
-V option is specified, it writes instead a view of the
details of the packet, showing all the fields of all protocols in the packet.
If the
-O option is specified, it will only show the full protocols
specified. Use the output of "
tshark -G protocols" to find
the abbreviations of the protocols you can specify.
If you want to write the decoded form of packets to a file, run
TShark
without the
-w option, and redirect its standard output to the file (do
not use the
-w option).
When writing packets to a file,
TShark, by default, writes the file in
pcap format, and writes all of the packets it sees to the output file.
The
-F option can be used to specify the format in which to write the
file. This list of available file formats is displayed by the
-F flag
without a value. However, you can't specify a file format for a live capture.
Read filters in
TShark, which allow you to select which packets are to be
decoded or written to a file, are very powerful; more fields are filterable in
TShark than in other protocol analyzers, and the syntax you can use to
create your filters is richer. As
TShark progresses, expect more and
more protocol fields to be allowed in read filters.
Packet capturing is performed with the pcap library. The capture filter syntax
follows the rules of the pcap library. This syntax is different from the read
filter syntax. A read filter can also be specified when capturing, and only
packets that pass the read filter will be displayed or saved to the output
file; note, however, that capture filters are much more efficient than read
filters, and it may be more difficult for
TShark to keep up with a busy
network if a read filter is specified for a live capture.
A capture or read filter can either be specified with the
-f or
-R
option, respectively, in which case the entire filter expression must be
specified as a single argument (which means that if it contains spaces, it
must be quoted), or can be specified with command-line arguments after the
option arguments, in which case all the arguments after the filter arguments
are treated as a filter expression. Capture filters are supported only when
doing a live capture; read filters are supported when doing a live capture and
when reading a capture file, but require TShark to do more work when
filtering, so you might be more likely to lose packets under heavy load if
you're using a read filter. If the filter is specified with command-line
arguments after the option arguments, it's a capture filter if a capture is
being done (i.e., if no
-r option was specified) and a read filter if a
capture file is being read (i.e., if a
-r option was specified).
The
-G option is a special mode that simply causes
Tshark to dump
one of several types of internal glossaries and then exit.
OPTIONS¶
- -2
- Perform a two-pass analysis. This causes tshark to buffer
output until the entire first pass is done, but allows it to fill in
fields that require future knowledge, such as 'response in frame #'
fields. Also permits reassembly frame dependencies to be calculated
correctly.
- -a <capture autostop condition>
- Specify a criterion that specifies when TShark is to
stop writing to a capture file. The criterion is of the form
test:value, where test is one of:
duration:value Stop writing to a capture file after
value seconds have elapsed.
filesize:value Stop writing to a capture file after it
reaches a size of value kB. If this option is used together with
the -b option, TShark will stop writing to the current capture file
and switch to the next one if filesize is reached. When reading a capture
file, TShark will stop reading the file after the number of bytes
read exceeds this number (the complete packet will be read, so more bytes
than this number may be read). Note that the filesize is limited to a
maximum value of 2 GiB.
files:value Stop writing to capture files after value
number of files were written.
- -b <capture ring buffer option>
- Cause TShark to run in "multiple files"
mode. In "multiple files" mode, TShark will write to
several capture files. When the first capture file fills up, TShark
will switch writing to the next file and so on.
The created filenames are based on the filename given with the -w
option, the number of the file and on the creation date and time, e.g.
outfile_00001_20050604120117.pcap, outfile_00002_20050604120523.pcap, ...
With the files option it's also possible to form a "ring
buffer". This will fill up new files until the number of files
specified, at which point TShark will discard the data in the first
file and start writing to that file and so on. If the files option
is not set, new files filled up until one of the capture stop conditions
match (or until the disk is full).
The criterion is of the form key:value, where
key is one of:
duration:value switch to the next file after value
seconds have elapsed, even if the current file is not completely filled
up.
filesize:value switch to the next file after it reaches a
size of value kB. Note that the filesize is limited to a maximum
value of 2 GiB.
files:value begin again with the first file after
value number of files were written (form a ring buffer). This value
must be less than 100000. Caution should be used when using large numbers
of files: some filesystems do not handle many files in a single directory
well. The files criterion requires either duration or
filesize to be specified to control when to go to the next file. It
should be noted that each -b parameter takes exactly one criterion;
to specify two criterion, each must be preceded by the -b option.
Example: -b filesize:1000 -b files:5 results in a ring buffer of five
files of size one megabyte each.
- -B <capture buffer size>
- Set capture buffer size (in MiB, default is 2 MiB). This is
used by the capture driver to buffer packet data until that data can be
written to disk. If you encounter packet drops while capturing, try to
increase this size. Note that, while Tshark attempts to set the
buffer size to 2 MiB by default, and can be told to set it to a larger
value, the system or interface on which you're capturing might silently
limit the capture buffer size to a lower value or raise it to a higher
value.
This is available on UNIX systems with libpcap 1.0.0 or later and on
Windows. It is not available on UNIX systems with earlier versions of
libpcap.
This option can occur multiple times. If used before the first occurrence of
the -i option, it sets the default capture buffer size. If used
after an -i option, it sets the capture buffer size for the
interface specified by the last -i option occurring before this
option. If the capture buffer size is not set specifically, the default
capture buffer size is used instead.
- -c <capture packet count>
- Set the maximum number of packets to read when capturing
live data. If reading a capture file, set the maximum number of packets to
read.
- -C <configuration profile>
- Run with the given configuration profile.
- -d <layer type>==<selector>,<decode-as
protocol>
- Like Wireshark's Decode As... feature, this lets you
specify how a layer type should be dissected. If the layer type in
question (for example, tcp.port or udp.port for a TCP or UDP
port number) has the specified selector value, packets should be dissected
as the specified protocol.
Example: -d tcp.port==8888,http will decode any traffic running over
TCP port 8888 as HTTP.
Example: -d tcp.port==8888:3,http will decode any traffic running
over TCP ports 8888, 8889 or 8890 as HTTP.
Example: -d tcp.port==8888-8890,http will decode any traffic running
over TCP ports 8888, 8889 or 8890 as HTTP.
Using an invalid selector or protocol will print out a list of valid
selectors and protocol names, respectively.
Example: -d . is a quick way to get a list of valid selectors.
Example: -d ethertype==0x0800. is a quick way to get a list of
protocols that can be selected with an ethertype.
- -D
- Print a list of the interfaces on which TShark can
capture, and exit. For each network interface, a number and an interface
name, possibly followed by a text description of the interface, is
printed. The interface name or the number can be supplied to the -i
option to specify an interface on which to capture.
This can be useful on systems that don't have a command to list them (e.g.,
Windows systems, or UNIX systems lacking ifconfig -a); the number
can be useful on Windows 2000 and later systems, where the interface name
is a somewhat complex string.
Note that "can capture" means that TShark was able to open
that device to do a live capture. Depending on your system you may need to
run tshark from an account with special privileges (for example, as root)
to be able to capture network traffic. If TShark -D is not run from
such an account, it will not list any interfaces.
- -e <field>
- Add a field to the list of fields to display if -T
fields is selected. This option can be used multiple times on the
command line. At least one field must be provided if the -T fields
option is selected. Column names may be used prefixed with
"_ws.col."
Example: -e frame.number -e ip.addr -e udp -e _ws.col.info
Giving a protocol rather than a single field will print multiple items of
data about the protocol as a single field. Fields are separated by tab
characters by default. -E controls the format of the printed
fields.
- -E <field print option>
- Set an option controlling the printing of fields when -T
fields is selected.
Options are:
header=y|n If y, print a list of the field names given using
-e as the first line of the output; the field name will be
separated using the same character as the field values. Defaults to
n.
separator=/t|/s|<character> Set the separator character to use
for fields. If /t tab will be used (this is the default), if
/s, a single space will be used. Otherwise any character that can
be accepted by the command line as part of the option may be used.
occurrence=f|l|a Select which occurrence to use for fields that have
multiple occurrences. If f the first occurrence will be used, if
l the last occurrence will be used and if a all occurrences
will be used (this is the default).
aggregator=,|/s|<character> Set the aggregator character to
use for fields that have multiple occurrences. If , a comma will be
used (this is the default), if /s, a single space will be used.
Otherwise any character that can be accepted by the command line as part
of the option may be used.
quote=d|s|n Set the quote character to use to surround fields.
d uses double-quotes, s single-quotes, n no quotes
(the default).
- -f <capture filter>
- Set the capture filter expression.
This option can occur multiple times. If used before the first occurrence of
the -i option, it sets the default capture filter expression. If
used after an -i option, it sets the capture filter expression for
the interface specified by the last -i option occurring before this
option. If the capture filter expression is not set specifically, the
default capture filter expression is used if provided.
- -F <file format>
- Set the file format of the output capture file written
using the -w option. The output written with the -w option
is raw packet data, not text, so there is no -F option to request
text output. The option -F without a value will list the available
formats.
- -g
- This option causes the output file(s) to be created with
group-read permission (meaning that the output file(s) can be read by
other members of the calling user's group).
- -G
[column-formats|currentprefs|decodes|defaultprefs|fields|ftypes|heuristic-decodes|plugins|protocols|values]
- The -G option will cause Tshark to dump one
of several types of glossaries and then exit. If no specific glossary type
is specified, then the fields report will be generated by default.
The available report types include:
column-formats Dumps the column formats understood by tshark. There
is one record per line. The fields are tab-delimited.
* Field 1 = format string (e.g. "%rD")
* Field 2 = text description of format string (e.g. "Dest port (resolved)")
currentprefs Dumps a copy of the current preferences file to stdout.
decodes Dumps the "layer type"/"decode as"
associations to stdout. There is one record per line. The fields are
tab-delimited.
* Field 1 = layer type, e.g. "tcp.port"
* Field 2 = selector in decimal
* Field 3 = "decode as" name, e.g. "http"
defaultprefs Dumps a default preferences file to stdout.
fields Dumps the contents of the registration database to stdout. An
independent program can take this output and format it into nice tables or
HTML or whatever. There is one record per line. Each record is either a
protocol or a header field, differentiated by the first field. The fields
are tab-delimited.
* Protocols
* ---------
* Field 1 = 'P'
* Field 2 = descriptive protocol name
* Field 3 = protocol abbreviation
*
* Header Fields
* -------------
* Field 1 = 'F'
* Field 2 = descriptive field name
* Field 3 = field abbreviation
* Field 4 = type ( textual representation of the ftenum type )
* Field 5 = parent protocol abbreviation
* Field 6 = base for display (for integer types); "parent bitfield width" for FT_BOOLEAN
* Field 7 = bitmask: format: hex: 0x....
* Field 8 = blurb describing field
ftypes Dumps the "ftypes" (fundamental types) understood
by tshark. There is one record per line. The fields are tab-delimited.
* Field 1 = FTYPE (e.g "FT_IPv6")
* Field 2 = text description of type (e.g. "IPv6 address")
heuristic-decodes Dumps the heuristic decodes currently installed.
There is one record per line. The fields are tab-delimited.
* Field 1 = underlying dissector (e.g. "tcp")
* Field 2 = name of heuristic decoder (e.g. ucp")
* Field 3 = heuristic enabled (e.g. "T" or "F")
plugins Dumps the plugins currently installed. There is one record
per line. The fields are tab-delimited.
* Field 1 = plugin library (e.g. "gryphon.so")
* Field 2 = plugin version (e.g. 0.0.4)
* Field 3 = plugin type (e.g. "dissector" or "tap")
* Field 4 = full path to plugin file
protocols Dumps the protocols in the registration database to
stdout. An independent program can take this output and format it into
nice tables or HTML or whatever. There is one record per line. The fields
are tab-delimited.
* Field 1 = protocol name
* Field 2 = protocol short name
* Field 3 = protocol filter name
values Dumps the value_strings, range_strings or true/false strings
for fields that have them. There is one record per line. Fields are
tab-delimited. There are three types of records: Value String, Range
String and True/False String. The first field, 'V', 'R' or 'T', indicates
the type of record.
* Value Strings
* -------------
* Field 1 = 'V'
* Field 2 = field abbreviation to which this value string corresponds
* Field 3 = Integer value
* Field 4 = String
*
* Range Strings
* -------------
* Field 1 = 'R'
* Field 2 = field abbreviation to which this range string corresponds
* Field 3 = Integer value: lower bound
* Field 4 = Integer value: upper bound
* Field 5 = String
*
* True/False Strings
* ------------------
* Field 1 = 'T'
* Field 2 = field abbreviation to which this true/false string corresponds
* Field 3 = True String
* Field 4 = False String
- -h
- Print the version and options and exits.
- -H <input hosts file>
- Read a list of entries from a "hosts" file, which
will then be written to a capture file. Implies -W n. Can be called
multiple times.
The "hosts" file format is documented at
<http://en.wikipedia.org/wiki/Hosts_(file)>.
- -i <capture interface> | -
- Set the name of the network interface or pipe to use for
live packet capture.
Network interface names should match one of the names listed in "
tshark -D" (described above); a number, as reported by "
tshark -D", can also be used. If you're using UNIX,
"netstat -i" or "ifconfig -a"
might also work to list interface names, although not all versions of UNIX
support the -a option to ifconfig.
If no interface is specified, TShark searches the list of interfaces,
choosing the first non-loopback interface if there are any non-loopback
interfaces, and choosing the first loopback interface if there are no
non-loopback interfaces. If there are no interfaces at all, TShark
reports an error and doesn't start the capture.
Pipe names should be either the name of a FIFO (named pipe) or ``-'' to read
data from the standard input. Data read from pipes must be in standard
pcap format.
This option can occur multiple times. When capturing from multiple
interfaces, the capture file will be saved in pcap-ng format.
Note: the Win32 version of TShark doesn't support capturing from
pipes!
- -I
- Put the interface in "monitor mode"; this is
supported only on IEEE 802.11 Wi-Fi interfaces, and supported only on some
operating systems.
Note that in monitor mode the adapter might disassociate from the network
with which it's associated, so that you will not be able to use any
wireless networks with that adapter. This could prevent accessing files on
a network server, or resolving host names or network addresses, if you are
capturing in monitor mode and are not connected to another network with
another adapter.
This option can occur multiple times. If used before the first occurrence of
the -i option, it enables the monitor mode for all interfaces. If
used after an -i option, it enables the monitor mode for the
interface specified by the last -i option occurring before this
option.
- -K <keytab>
- Load kerberos crypto keys from the specified keytab file.
This option can be used multiple times to load keys from several files.
Example: -K krb5.keytab
- -l
- Flush the standard output after the information for each
packet is printed. (This is not, strictly speaking, line-buffered if
-V was specified; however, it is the same as line-buffered if
-V wasn't specified, as only one line is printed for each packet,
and, as -l is normally used when piping a live capture to a program
or script, so that output for a packet shows up as soon as the packet is
seen and dissected, it should work just as well as true line-buffering. We
do this as a workaround for a deficiency in the Microsoft Visual C++ C
library.)
This may be useful when piping the output of TShark to another
program, as it means that the program to which the output is piped will
see the dissected data for a packet as soon as TShark sees the
packet and generates that output, rather than seeing it only when the
standard output buffer containing that data fills up.
- -L
- List the data link types supported by the interface and
exit. The reported link types can be used for the -y option.
- -n
- Disable network object name resolution (such as hostname,
TCP and UDP port names); the -N flag might override this one.
- -N <name resolving flags>
- Turn on name resolving only for particular types of
addresses and port numbers, with name resolving for other types of
addresses and port numbers turned off. This flag overrides -n if
both -N and -n are present. If both -N and -n
flags are not present, all name resolutions are turned on.
The argument is a string that may contain the letters:
C to enable concurrent (asynchronous) DNS lookups
m to enable MAC address resolution
n to enable network address resolution
N to enable using external resolvers (e.g., DNS) for network address
resolution
t to enable transport-layer port number resolution
- -o <preference>:<value>
- Set a preference value, overriding the default value and
any value read from a preference file. The argument to the option is a
string of the form prefname:value, where
prefname is the name of the preference (which is the same name that
would appear in the preference file), and value is the value to
which it should be set.
- -O <protocols>
- Similar to the -V option, but causes TShark
to only show a detailed view of the comma-separated list of
protocols specified, rather than a detailed view of all protocols.
Use the output of " tshark -G protocols" to find the
abbreviations of the protocols you can specify.
- -p
- Don't put the interface into promiscuous mode. Note
that the interface might be in promiscuous mode for some other reason;
hence, -p cannot be used to ensure that the only traffic that is
captured is traffic sent to or from the machine on which TShark is
running, broadcast traffic, and multicast traffic to addresses received by
that machine.
This option can occur multiple times. If used before the first occurrence of
the -i option, no interface will be put into the promiscuous mode.
If used after an -i option, the interface specified by the last
-i option occurring before this option will not be put into the
promiscuous mode.
- -P
- Decode and display the packet summary, even if writing raw
packet data using the -w option.
- -q
- When capturing packets, don't display the continuous count
of packets captured that is normally shown when saving a capture to a
file; instead, just display, at the end of the capture, a count of packets
captured. On systems that support the SIGINFO signal, such as various
BSDs, you can cause the current count to be displayed by typing your
"status" character (typically control-T, although it might be
set to "disabled" by default on at least some BSDs, so you'd
have to explicitly set it to use it).
When reading a capture file, or when capturing and not saving to a file,
don't print packet information; this is useful if you're using a -z
option to calculate statistics and don't want the packet information
printed, just the statistics.
- -Q
- When capturing packets, only display true errors. This
outputs less than the -q option, so the interface name and total
packet count and the end of a capture are not sent to stderr.
- -r <infile>
- Read packet data from infile, can be any supported
capture file format (including gzipped files). It is possible to use named
pipes or stdin (-) here but only with certain (not compressed) capture
file formats (in particular: those that can be read without seeking
backwards).
- -R <Read filter>
- Cause the specified filter (which uses the syntax of
read/display filters, rather than that of capture filters) to be applied
during the first pass of analysis. Packets not matching the filter are not
considered for future passes. Only makes sense with multiple passes, see
-2. For regular filtering on single-pass dissect see -Y instead.
Note that forward-looking fields such as 'response in frame #' cannot be
used with this filter, since they will not have been calculate when this
filter is applied.
- -s <capture snaplen>
- Set the default snapshot length to use when capturing live
data. No more than snaplen bytes of each network packet will be
read into memory, or saved to disk. A value of 0 specifies a snapshot
length of 65535, so that the full packet is captured; this is the default.
This option can occur multiple times. If used before the first occurrence of
the -i option, it sets the default snapshot length. If used after
an -i option, it sets the snapshot length for the interface
specified by the last -i option occurring before this option. If
the snapshot length is not set specifically, the default snapshot length
is used if provided.
- -S <separator>
- Set the line separator to be printed between packets.
- -t a|ad|adoy|d|dd|e|r|u|ud|udoy
- Set the format of the packet timestamp printed in summary
lines. The format can be one of:
a absolute: The absolute time, as local time in your time zone, is
the actual time the packet was captured, with no date displayed
ad absolute with date: The absolute date, displayed as YYYY-MM-DD,
and time, as local time in your time zone, is the actual time and date the
packet was captured
adoy absolute with date using day of year: The absolute date,
displayed as YYYY/DOY, and time, as local time in your time zone, is the
actual time and date the packet was captured
d delta: The delta time is the time since the previous packet was
captured
dd delta_displayed: The delta_displayed time is the time since the
previous displayed packet was captured
e epoch: The time in seconds since epoch (Jan 1, 1970 00:00:00)
r relative: The relative time is the time elapsed between the first
packet and the current packet
u UTC: The absolute time, as UTC, is the actual time the packet was
captured, with no date displayed
ud UTC with date: The absolute date, displayed as YYYY-MM-DD, and
time, as UTC, is the actual time and date the packet was captured
udoy UTC with date using day of year: The absolute date, displayed
as YYYY/DOY, and time, as UTC, is the actual time and date the packet was
captured
The default format is relative.
- -T fields|pdml|ps|psml|text
- Set the format of the output when viewing decoded packet
data. The options are one of:
fields The values of fields specified with the -e option, in
a form specified by the -E option. For example,
-T fields -E separator=, -E quote=d
would generate comma-separated values (CSV) output suitable for importing
into your favorite spreadsheet program.
pdml Packet Details Markup Language, an XML-based format for the
details of a decoded packet. This information is equivalent to the packet
details printed with the -V flag.
ps PostScript for a human-readable one-line summary of each of the
packets, or a multi-line view of the details of each of the packets,
depending on whether the -V flag was specified.
psml Packet Summary Markup Language, an XML-based format for the
summary information of a decoded packet. This information is equivalent to
the information shown in the one-line summary printed by default.
text Text of a human-readable one-line summary of each of the
packets, or a multi-line view of the details of each of the packets,
depending on whether the -V flag was specified. This is the
default.
- -u <seconds type>
- Specifies the seconds type. Valid choices are:
s for seconds
hms for hours, minutes and seconds
- -v
- Print the version and exit.
- -V
- Cause TShark to print a view of the packet
details.
- -w <outfile> | -
- Write raw packet data to outfile or to the standard
output if outfile is '-'.
NOTE: -w provides raw packet data, not text. If you want text output you
need to redirect stdout (e.g. using '>'), don't use the -w
option for this.
- -W <file format option>
- Save extra information in the file if the format supports
it. For example,
-F pcapng -W n
will save host name resolution records along with captured packets.
Future versions of Wireshark may automatically change the capture format to
pcapng as needed.
The argument is a string that may contain the following letter:
n write network address resolution information (pcapng only)
- -x
- Cause TShark to print a hex and ASCII dump of the
packet data after printing the summary and/or details, if either are also
being displayed.
- -X <eXtension options>
- Specify an option to be passed to a TShark module.
The eXtension option is in the form
extension_key:value, where extension_key can
be:
lua_script:lua_script_filename tells TShark to load
the given script in addition to the default Lua scripts.
lua_scriptnum:argument tells TShark to pass the
given argument to the lua script identified by 'num', which is the number
indexed order of the 'lua_script' command. For example, if only one script
was loaded with '-X lua_script:my.lua', then '-X lua_script1:foo' will
pass the string 'foo' to the 'my.lua' script. If two scripts were loaded,
such as '-X lua_script:my.lua' and '-X lua_script:other.lua' in that
order, then a '-X lua_script2:bar' would pass the string 'bar' to the
second lua script, namely 'other.lua'.
read_format:file_format tells TShark to use the given
file format to read in the file (the file given in the -r command
option). Providing no file_format argument, or an invalid one, will
produce a file of available file formats to use.
- -y <capture link type>
- Set the data link type to use while capturing packets. The
values reported by -L are the values that can be used.
This option can occur multiple times. If used before the first occurrence of
the -i option, it sets the default capture link type. If used after
an -i option, it sets the capture link type for the interface
specified by the last -i option occurring before this option. If
the capture link type is not set specifically, the default capture link
type is used if provided.
- -Y <displaY filter>
- Cause the specified filter (which uses the syntax of
read/display filters, rather than that of capture filters) to be applied
before printing a decoded form of packets or writing packets to a file.
Packets matching the filter are printed or written to file; packets that
the matching packets depend upon (e.g., fragments), are not printed but
are written to file; packets not matching the filter nor depended upon are
discarded rather than being printed or written.
Use this instead of -R for filtering using single-pass analysis. If doing
two-pass analysis (see -2) then only packets matching the read filter (if
there is one) will be checked against this filter.
- -z <statistics>
- Get TShark to collect various types of statistics
and display the result after finishing reading the capture file. Use the
-q flag if you're reading a capture file and only want the
statistics printed, not any per-packet information.
Note that the -z proto option is different - it doesn't cause
statistics to be gathered and printed when the capture is complete, it
modifies the regular packet summary output to include the values of fields
specified with the option. Therefore you must not use the -q
option, as that option would suppress the printing of the regular packet
summary output, and must also not use the -V option, as that would
cause packet detail information rather than packet summary information to
be printed.
Currently implemented statistics are:
- -z help
- Display all possible values for -z.
- -z afp,srt[,filter]
- -z camel,srt
- -z
compare,start,stop,ttl[0|1],order[0|1],variance[,filter]
- If the optional filter is specified, only those
packets that match the filter will be used in the calculations.
- -z conv,type[,filter]
- Create a table that lists all conversations that could be
seen in the capture. type specifies the conversation endpoint types
for which we want to generate the statistics; currently the supported ones
are:
"eth" Ethernet addresses
"fc" Fibre Channel addresses
"fddi" FDDI addresses
"ip" IPv4 addresses
"ipv6" IPv6 addresses
"ipx" IPX addresses
"tcp" TCP/IP socket pairs Both IPv4 and IPv6 are supported
"tr" Token Ring addresses
"udp" UDP/IP socket pairs Both IPv4 and IPv6 are supported
If the optional filter is specified, only those packets that match
the filter will be used in the calculations.
The table is presented with one line for each conversation and displays the
number of packets/bytes in each direction as well as the total number of
packets/bytes. The table is sorted according to the total number of
frames.
- -z
dcerpc,srt,uuid,major.minor[, filter]
- Collect call/reply SRT (Service Response Time) data for
DCERPC interface uuid, version major.minor. Data
collected is the number of calls for each procedure, MinSRT, MaxSRT and
AvgSRT.
Example: -z dcerpc,srt,12345778-1234-abcd-ef00-0123456789ac,1.0
will collect data for the CIFS SAMR Interface.
This option can be used multiple times on the command line.
If the optional filter is provided, the stats will only be calculated
on those calls that match that filter.
Example:
-z dcerpc,srt,12345778-1234-abcd-ef00-0123456789ac,1.0,ip.addr==1.2.3.4
will collect SAMR SRT statistics for a specific host.
- -z
diameter,avp[,cmd.code,field,field, ...]
- This option enables extraction of most important diameter
fields from large capture files. Exactly one text line for each diameter
message with matched diameter.cmd.code will be printed.
Empty diameter command code or '*' can be specified to mach any
diameter.cmd.code
Example: -z diameter,avp extract default field set from diameter
messages.
Example: -z diameter,avp,280 extract default field set from diameter
DWR messages.
Example: -z diameter,avp,272 extract default field set from diameter
CC messages.
Extract most important fields from diameter CC messages:
tshark -r file.cap.gz -q -z
diameter,avp,272,CC-Request-Type,CC-Request-Number,Session-Id,Subscription-Id-Data,Rating-Group,Result-Code
Following fields will be printed out for each diameter message:
"frame" Frame number.
"time" Unix time of the frame arrival.
"src" Source address.
"srcport" Source port.
"dst" Destination address.
"dstport" Destination port.
"proto" Constant string 'diameter', which can be used for post processing of tshark output. E.g. grep/sed/awk.
"msgnr" seq. number of diameter message within the frame. E.g. '2' for the third diameter message in the same frame.
"is_request" '0' if message is a request, '1' if message is an answer.
"cmd" diameter.cmd_code, E.g. '272' for credit control messages.
"req_frame" Number of frame where matched request was found or '0'.
"ans_frame" Number of frame where matched answer was found or '0'.
"resp_time" response time in seconds, '0' in case if matched Request/Answer is not found in trace. E.g. in the begin or end of capture.
-z diameter,avp option is much faster than -V -T text or
-T pdml options.
-z diameter,avp option is more powerful than -T field and
-z proto,colinfo options.
Multiple diameter messages in one frame are supported.
Several fields with same name within one diameter message are supported,
e.g. diameter.Subscription-Id-Data or diameter.Rating-Group.
Note: tshark -q option is recommended to suppress default
tshark output.
- -z
expert[,error|,warn|,note|,chat][,filter]
- Collects information about all expert info, and will
display them in order, grouped by severity.
Example: -z expert,sip will show expert items of all severity for
frames that match the sip protocol.
This option can be used multiple times on the command line.
If the optional filter is provided, the stats will only be calculated
on those calls that match that filter.
Example: -z "expert,note,tcp" will only collect expert
items for frames that include the tcp protocol, with a severity of note or
higher.
- -z
follow,prot,mode,filter[,range]
- Displays the contents of a TCP or UDP stream between two
nodes. The data sent by the second node is prefixed with a tab to
differentiate it from the data sent by the first node.
prot specifies the transport protocol. It can be one of:
tcp TCP
udp UDP
ssl SSL
mode specifies the output mode. It can be one of:
ascii ASCII output with dots for non-printable characters
hex Hexadecimal and ASCII data with offsets
raw Hexadecimal data
Since the output in ascii mode may contain newlines, the length of
each section of output plus a newline precedes each section of output.
filter specifies the stream to be displayed. UDP streams are
selected with IP address plus port pairs. TCP streams are selected with
either the stream index or IP address plus port pairs. For example:
ip-addr0:port0,ip-addr1:port1
tcp-stream-index
range optionally specifies which "chunks" of the stream
should be displayed.
Example: -z "follow,tcp,hex,1" will display the contents of
the first TCP stream in "hex" format.
===================================================================
Follow: tcp,hex
Filter: tcp.stream eq 1
Node 0: 200.57.7.197:32891
Node 1: 200.57.7.198:2906
00000000 00 00 00 22 00 00 00 07 00 0a 85 02 07 e9 00 02 ...".... ........
00000010 07 e9 06 0f 00 0d 00 04 00 00 00 01 00 03 00 06 ........ ........
00000020 1f 00 06 04 00 00 ......
00000000 00 01 00 00 ....
00000026 00 02 00 00
Example: -z
"follow,tcp,ascii,200.57.7.197:32891,200.57.7.198:2906" will
display the contents of a TCP stream between 200.57.7.197 port 32891 and
200.57.7.98 port 2906.
===================================================================
Follow: tcp,ascii
Filter: (omitted for readability)
Node 0: 200.57.7.197:32891
Node 1: 200.57.7.198:2906
38
...".....
................
4
....
- -z h225,counter[,filter]
- Count ITU-T H.225 messages and their reasons. In the first
column you get a list of H.225 messages and H.225 message reasons, which
occur in the current capture file. The number of occurrences of each
message or reason is displayed in the second column.
Example: -z h225,counter.
If the optional filter is provided, the stats will only be calculated
on those calls that match that filter. Example: use -z
"h225,counter,ip.addr==1.2.3.4" to only collect stats for
H.225 packets exchanged by the host at IP address 1.2.3.4 .
This option can be used multiple times on the command line.
- -z h225,srt[,filter]
- Collect requests/response SRT (Service Response Time) data
for ITU-T H.225 RAS. Data collected is number of calls of each ITU-T H.225
RAS Message Type, Minimum SRT, Maximum SRT, Average SRT, Minimum in
Packet, and Maximum in Packet. You will also get the number of Open
Requests (Unresponded Requests), Discarded Responses (Responses without
matching request) and Duplicate Messages.
Example: -z h225,srt
This option can be used multiple times on the command line.
If the optional filter is provided, the stats will only be calculated
on those calls that match that filter.
Example: -z "h225,srt,ip.addr==1.2.3.4" will only collect
stats for ITU-T H.225 RAS packets exchanged by the host at IP address
1.2.3.4 .
- -z hosts[,ipv4][,ipv6]
- Dump any collected IPv4 and/or IPv6 addresses in
"hosts" format. Both IPv4 and IPv6 addresses are dumped by
default.
Addresses are collected from a number of sources, including standard
"hosts" files and captured traffic.
- -z http,stat,
- Calculate the HTTP statistics distribution. Displayed
values are the HTTP status codes and the HTTP request methods.
- -z http,tree
- Calculate the HTTP packet distribution. Displayed values
are the HTTP request modes and the HTTP status codes.
- -z http_req,tree
- Calculate the HTTP requests by server. Displayed values are
the server name and the URI path.
- -z http_srv,tree
- Calculate the HTTP requests and responses by server. For
the HTTP requests, displayed values are the server IP address and server
hostname. For the HTTP responses, displayed values are the server IP
address and status.
- -z icmp,srt[,filter]
- Compute total ICMP echo requests, replies, loss, and
percent loss, as well as minimum, maximum, mean, median and sample
standard deviation SRT statistics typical of what ping provides.
Example: -z icmp,srt,ip.src==1.2.3.4 will collect ICMP SRT
statistics for ICMP echo request packets originating from a specific host.
This option can be used multiple times on the command line.
- -z icmpv6,srt[,filter]
- Compute total ICMPv6 echo requests, replies, loss, and
percent loss, as well as minimum, maximum, mean, median and sample
standard deviation SRT statistics typical of what ping provides.
Example: -z icmpv6,srt,ipv6.src==fe80::1 will collect ICMPv6 SRT
statistics for ICMPv6 echo request packets originating from a specific
host.
This option can be used multiple times on the command line.
- -z io,phs[,filter]
- Create Protocol Hierarchy Statistics listing both number of
packets and bytes. If no filter is specified the statistics will be
calculated for all packets. If a filter is specified statistics
will only be calculated for those packets that match the filter.
This option can be used multiple times on the command line.
- -z
io,stat,interval[,filter][,filter][,
filter]...
- Collect packet/bytes statistics for the capture in
intervals of interval seconds. Interval can be specified
either as a whole or fractional second and can be specified with
microsecond (us) resolution. If interval is 0, the statistics will
be calculated over all packets.
If no filter is specified the statistics will be calculated for all
packets. If one or more filters are specified statistics will be
calculated for all filters and presented with one column of statistics for
each filter.
This option can be used multiple times on the command line.
Example: -z io,stat,1,ip.addr==1.2.3.4 will generate 1 second
statistics for all traffic to/from host 1.2.3.4.
Example: -z "io,stat,0.001,smb&&ip.addr==1.2.3.4"
will generate 1ms statistics for all SMB packets to/from host 1.2.3.4.
The examples above all use the standard syntax for generating statistics
which only calculates the number of packets and bytes in each interval.
io,stat can also do much more statistics and calculate
COUNT(), SUM(), MIN(), MAX(), AVG() and
LOAD() using a slightly different filter syntax:
- -z
io,stat,interval,"[COUNT|SUM|MIN|MAX|AVG|LOAD](
field)filter"
- NOTE: One important thing to note here is that the filter
is not optional and that the field that the calculation is based on MUST
be part of the filter string or the calculation will fail.
So: -z io,stat,0.010,AVG(smb.time) does not work. Use -z
io,stat,0.010,AVG(smb.time)smb.time instead. Also be aware that a
field can exist multiple times inside the same packet and will then be
counted multiple times in those packets.
NOTE: A second important thing to note is that the system setting for
decimal separator must be set to "."! If it is set to
"," the statistics will not be displayed per filter.
COUNT(field)filter -
Calculates the number of times that the field name (not its value)
appears per interval in the filtered packet list. '' field'' can be
any display filter name.
Example: -z io,stat,0.010,"COUNT(smb.sid)smb.sid"
This will count the total number of SIDs seen in each 10ms interval.
SUM(field)filter - Unlike
COUNT, the values of the specified field are summed per time
interval. '' field'' can only be a named integer, float, double or
relative time field.
Example: -z io,stat,0.010,"SUM(frame.len)frame.len"
Reports the total number of bytes that were transmitted bidirectionally in
all the packets within a 10 millisecond interval.
MIN/MAX/AVG(field)filter -
The minimum, maximum, or average field value in each interval is
calculated. The specified field must be a named integer, float, double or
relative time field. For relative time fields, the output is presented in
seconds with six decimal digits of precision rounded to the nearest
microsecond.
In the following example, the time of the first Read_AndX call, the last
Read_AndX response values are displayed and the minimum, maximum, and
average Read response times (SRTs) are calculated. NOTE: If the DOS
command shell line continuation character, ''^'' is used, each line cannot
end in a comma so it is placed at the beginning of each continuation line:
tshark -o tcp.desegment_tcp_streams:FALSE -n -q -r smb_reads.cap -z io,stat,0,
"MIN(frame.time_relative)frame.time_relative and smb.cmd==0x2e and smb.flags.response==0",
"MAX(frame.time_relative)frame.time_relative and smb.cmd==0x2e and smb.flags.response==1",
"MIN(smb.time)smb.time and smb.cmd==0x2e",
"MAX(smb.time)smb.time and smb.cmd==0x2e",
"AVG(smb.time)smb.time and smb.cmd==0x2e"
======================================================================================================
IO Statistics
Column #0: MIN(frame.time_relative)frame.time_relative and smb.cmd==0x2e and smb.flags.response==0
Column #1: MAX(frame.time_relative)frame.time_relative and smb.cmd==0x2e and smb.flags.response==1
Column #2: MIN(smb.time)smb.time and smb.cmd==0x2e
Column #3: MAX(smb.time)smb.time and smb.cmd==0x2e
Column #4: AVG(smb.time)smb.time and smb.cmd==0x2e
| Column #0 | Column #1 | Column #2 | Column #3 | Column #4 |
Time | MIN | MAX | MIN | MAX | AVG |
000.000- 0.000000 7.704054 0.000072 0.005539 0.000295
======================================================================================================
The following command displays the average SMB Read response PDU size, the
total number of read PDU bytes, the average SMB Write request PDU size,
and the total number of bytes transferred in SMB Write PDUs:
tshark -n -q -r smb_reads_writes.cap -z io,stat,0,
"AVG(smb.file.rw.length)smb.file.rw.length and smb.cmd==0x2e and smb.response_to",
"SUM(smb.file.rw.length)smb.file.rw.length and smb.cmd==0x2e and smb.response_to",
"AVG(smb.file.rw.length)smb.file.rw.length and smb.cmd==0x2f and not smb.response_to",
"SUM(smb.file.rw.length)smb.file.rw.length and smb.cmd==0x2f and not smb.response_to"
=====================================================================================
IO Statistics
Column #0: AVG(smb.file.rw.length)smb.file.rw.length and smb.cmd==0x2e and smb.response_to
Column #1: SUM(smb.file.rw.length)smb.file.rw.length and smb.cmd==0x2e and smb.response_to
Column #2: AVG(smb.file.rw.length)smb.file.rw.length and smb.cmd==0x2f and not smb.response_to
Column #3: SUM(smb.file.rw.length)smb.file.rw.length and smb.cmd==0x2f and not smb.response_to
| Column #0 | Column #1 | Column #2 | Column #3 |
Time | AVG | SUM | AVG | SUM |
000.000- 30018 28067522 72 3240
=====================================================================================
LOAD(field)filter - The
LOAD/Queue-Depth in each interval is calculated. The specified field must
be a relative time field that represents a response time. For example
smb.time. For each interval the Queue-Depth for the specified protocol is
calculated.
The following command displays the average SMB LOAD. A value of 1.0
represents one I/O in flight.
tshark -n -q -r smb_reads_writes.cap
-z "io,stat,0.001,LOAD(smb.time)smb.time"
============================================================================
IO Statistics
Interval: 0.001000 secs
Column #0: LOAD(smb.time)smb.time
| Column #0 |
Time | LOAD |
0000.000000-0000.001000 1.000000
0000.001000-0000.002000 0.741000
0000.002000-0000.003000 0.000000
0000.003000-0000.004000 1.000000
FRAMES | BYTES[()filter] - Displays the total
number of frames or bytes. The filter field is optional but if included it
must be prepended with ''()''.
The following command displays five columns: the total number of frames and
bytes (transferred bidirectionally) using a single comma, the same two
stats using the FRAMES and BYTES subcommands, the total number of frames
containing at least one SMB Read response, and the total number of bytes
transmitted to the client (unidirectionally) at IP address 10.1.0.64.
tshark -o tcp.desegment_tcp_streams:FALSE -n -q -r smb_reads.cap -z io,stat,0,,FRAMES,BYTES,
"FRAMES()smb.cmd==0x2e and smb.response_to","BYTES()ip.dst==10.1.0.64"
=======================================================================================================================
IO Statistics
Column #0:
Column #1: FRAMES
Column #2: BYTES
Column #3: FRAMES()smb.cmd==0x2e and smb.response_to
Column #4: BYTES()ip.dst==10.1.0.64
| Column #0 | Column #1 | Column #2 | Column #3 | Column #4 |
Time | Frames | Bytes | FRAMES | BYTES | FRAMES | BYTES |
000.000- 33576 29721685 33576 29721685 870 29004801
=======================================================================================================================
- -z mac-lte,stat[,filter]
- This option will activate a counter for LTE MAC messages.
You will get information about the maximum number of UEs/TTI, common
messages and various counters for each UE that appears in the log.
Example: -z mac-lte,stat.
This option can be used multiple times on the command line.
If the optional filter is provided, the stats will only be calculated
for those frames that match that filter. Example: -z
"mac-lte,stat,mac-lte.rnti3000"> will only collect stats
for UEs with an assigned RNTI whose value is more than 3000.
- -z megaco,rtd[,filter]
- Collect requests/response RTD (Response Time Delay) data
for MEGACO. (This is similar to -z smb,srt). Data collected is the
number of calls for each known MEGACO Type, MinRTD, MaxRTD and AvgRTD.
Additionally you get the number of duplicate requests/responses,
unresponded requests, responses, which don't match with any request.
Example: -z megaco,rtd.
If the optional filter is provided, the stats will only be calculated
on those calls that match that filter. Example: -z
"megaco,rtd,ip.addr==1.2.3.4" will only collect stats for
MEGACO packets exchanged by the host at IP address 1.2.3.4 .
This option can be used multiple times on the command line.
- -z mgcp,rtd[,filter]
- Collect requests/response RTD (Response Time Delay) data
for MGCP. (This is similar to -z smb,srt). Data collected is the
number of calls for each known MGCP Type, MinRTD, MaxRTD and AvgRTD.
Additionally you get the number of duplicate requests/responses,
unresponded requests, responses, which don't match with any request.
Example: -z mgcp,rtd.
This option can be used multiple times on the command line.
If the optional filter is provided, the stats will only be calculated
on those calls that match that filter. Example: -z
"mgcp,rtd,ip.addr==1.2.3.4" will only collect stats for MGCP
packets exchanged by the host at IP address 1.2.3.4 .
- -z proto,colinfo,filter,field
- Append all field values for the packet to the Info
column of the one-line summary output. This feature can be used to append
arbitrary fields to the Info column in addition to the normal content of
that column. field is the display-filter name of a field which
value should be placed in the Info column. filter is a filter
string that controls for which packets the field value will be presented
in the info column. field will only be presented in the Info column
for the packets which match filter.
NOTE: In order for TShark to be able to extract the field
value from the packet, field MUST be part of the filter
string. If not, TShark will not be able to extract its value.
For a simple example to add the "nfs.fh.hash" field to the Info
column for all packets containing the "nfs.fh.hash" field, use
-z proto,colinfo,nfs.fh.hash,nfs.fh.hash
To put "nfs.fh.hash" in the Info column but only for packets
coming from host 1.2.3.4 use:
-z "proto,colinfo,nfs.fh.hash &&
ip.src==1.2.3.4,nfs.fh.hash"
This option can be used multiple times on the command line.
- -z rlc-lte,stat[,filter]
- This option will activate a counter for LTE RLC messages.
You will get information about common messages and various counters for
each UE that appears in the log.
Example: -z rlc-lte,stat.
This option can be used multiple times on the command line.
If the optional filter is provided, the stats will only be calculated
for those frames that match that filter. Example: -z
"rlc-lte,stat,rlc-lte.ueid3000"> will only collect stats
for UEs with a UEId of more than 3000.
- -z rpc,programs
- Collect call/reply SRT data for all known ONC-RPC
programs/versions. Data collected is number of calls for each
protocol/version, MinSRT, MaxSRT and AvgSRT. This option can only be used
once on the command line.
- -z
rpc,srt,program,version[,filter]
- Collect call/reply SRT (Service Response Time) data for
program/ version. Data collected is the number of calls for
each procedure, MinSRT, MaxSRT, AvgSRT, and the total time taken for each
procedure.
Example: -z rpc,srt,100003,3 will collect data for NFS v3.
This option can be used multiple times on the command line.
If the optional filter is provided, the stats will only be calculated
on those calls that match that filter.
Example: -z rpc,srt,100003,3,nfs.fh.hash==0x12345678 will collect NFS
v3 SRT statistics for a specific file.
- -z rtp,streams
- Collect statistics for all RTP streams and calculate max.
delta, max. and mean jitter and packet loss percentages.
- -z scsi,srt,cmdset[,filter]
- Collect call/reply SRT (Service Response Time) data for
SCSI commandset cmdset.
Commandsets are 0:SBC 1:SSC 5:MMC
Data collected is the number of calls for each procedure, MinSRT, MaxSRT and
AvgSRT.
Example: -z scsi,srt,0 will collect data for SCSI BLOCK COMMANDS
(SBC).
This option can be used multiple times on the command line.
If the optional filter is provided, the stats will only be calculated
on those calls that match that filter.
Example: -z scsi,srt,0,ip.addr==1.2.3.4 will collect SCSI SBC SRT
statistics for a specific iscsi/ifcp/fcip host.
- -z sip,stat[,filter]
- This option will activate a counter for SIP messages. You
will get the number of occurrences of each SIP Method and of each SIP
Status-Code. Additionally you also get the number of resent SIP Messages
(only for SIP over UDP).
Example: -z sip,stat.
This option can be used multiple times on the command line.
If the optional filter is provided, the stats will only be calculated
on those calls that match that filter. Example: -z
"sip,stat,ip.addr==1.2.3.4" will only collect stats for SIP
packets exchanged by the host at IP address 1.2.3.4 .
- -z smb,sids
- When this feature is used TShark will print a report
with all the discovered SID and account name mappings. Only those SIDs
where the account name is known will be presented in the table.
For this feature to work you will need to either to enable
"Edit/Preferences/Protocols/SMB/Snoop SID to name mappings" in
the preferences or you can override the preferences by specifying
-o "smb.sid_name_snooping:TRUE" on the TShark
command line.
The current method used by TShark to find the SID->name mapping is
relatively restricted with a hope of future expansion.
- -z smb,srt[,filter]
- Collect call/reply SRT (Service Response Time) data for
SMB. Data collected is number of calls for each SMB command, MinSRT,
MaxSRT and AvgSRT.
Example: -z smb,srt
The data will be presented as separate tables for all normal SMB commands,
all Transaction2 commands and all NT Transaction commands. Only those
commands that are seen in the capture will have its stats displayed. Only
the first command in a xAndX command chain will be used in the
calculation. So for common SessionSetupAndX + TreeConnectAndX chains, only
the SessionSetupAndX call will be used in the statistics. This is a flaw
that might be fixed in the future.
This option can be used multiple times on the command line.
If the optional filter is provided, the stats will only be calculated
on those calls that match that filter.
Example: -z "smb,srt,ip.addr==1.2.3.4" will only collect
stats for SMB packets exchanged by the host at IP address 1.2.3.4 .
- --capture-comment <comment>
- Add a capture comment to the output file.
This option is only available if a new output file in pcapng format is
created. Only one capture comment may be set per output file.
CAPTURE FILTER SYNTAX¶
See the manual page of
pcap-filter(7) or, if that doesn't exist,
tcpdump(8), or, if that doesn't exist,
<
http://wiki.wireshark.org/CaptureFilters>.
READ FILTER SYNTAX¶
For a complete table of protocol and protocol fields that are filterable in
TShark see the
wireshark-filter(4) manual page.
FILES¶
These files contains various
Wireshark configuration values.
- Preferences
- The preferences files contain global (system-wide)
and personal preference settings. If the system-wide preference file
exists, it is read first, overriding the default settings. If the personal
preferences file exists, it is read next, overriding any previous values.
Note: If the command line option -o is used (possibly more than
once), it will in turn override values from the preferences files.
The preferences settings are in the form
prefname:value, one per line, where prefname
is the name of the preference and value is the value to which it
should be set; white space is allowed between : and value. A
preference setting can be continued on subsequent lines by indenting the
continuation lines with white space. A # character starts a comment
that runs to the end of the line:
# Capture in promiscuous mode?
# TRUE or FALSE (case-insensitive).
capture.prom_mode: TRUE
The global preferences file is looked for in the wireshark directory
under the share subdirectory of the main installation directory
(for example, /usr/local/share/wireshark/preferences) on
UNIX-compatible systems, and in the main installation directory (for
example, C:\Program Files\Wireshark\preferences) on Windows
systems.
The personal preferences file is looked for in
$HOME/.wireshark/preferences on UNIX-compatible
systems and %APPDATA%\Wireshark\preferences (or, if
%APPDATA% isn't defined, %USERPROFILE%\Application
Data\Wireshark\preferences) on Windows systems.
- Disabled (Enabled) Protocols
- The disabled_protos files contain system-wide and
personal lists of protocols that have been disabled, so that their
dissectors are never called. The files contain protocol names, one per
line, where the protocol name is the same name that would be used in a
display filter for the protocol:
http
tcp # a comment
The global disabled_protos file uses the same directory as the global
preferences file.
The personal disabled_protos file uses the same directory as the
personal preferences file.
- Name Resolution (hosts)
- If the personal hosts file exists, it is used to
resolve IPv4 and IPv6 addresses before any other attempts are made to
resolve them. The file has the standard hosts file syntax; each
line contains one IP address and name, separated by whitespace. The same
directory as for the personal preferences file is used.
Capture filter name resolution is handled by libpcap on UNIX-compatible
systems and WinPcap on Windows. As such the Wireshark personal
hosts file will not be consulted for capture filter name
resolution.
- Name Resolution (ethers)
- The ethers files are consulted to correlate 6-byte
hardware addresses to names. First the personal ethers file is
tried and if an address is not found there the global ethers file
is tried next.
Each line contains one hardware address and name, separated by whitespace.
The digits of the hardware address are separated by colons (:), dashes (-)
or periods (.). The same separator character must be used consistently in
an address. The following three lines are valid lines of an ethers
file:
ff:ff:ff:ff:ff:ff Broadcast
c0-00-ff-ff-ff-ff TR_broadcast
00.00.00.00.00.00 Zero_broadcast
The global ethers file is looked for in the /etc directory on
UNIX-compatible systems, and in the main installation directory (for
example, C:\Program Files\Wireshark) on Windows systems.
The personal ethers file is looked for in the same directory as the
personal preferences file.
Capture filter name resolution is handled by libpcap on UNIX-compatible
systems and WinPcap on Windows. As such the Wireshark personal
ethers file will not be consulted for capture filter name
resolution.
- Name Resolution (manuf)
- The manuf file is used to match the 3-byte vendor
portion of a 6-byte hardware address with the manufacturer's name; it can
also contain well-known MAC addresses and address ranges specified with a
netmask. The format of the file is the same as the ethers files,
except that entries of the form:
00:00:0C Cisco
can be provided, with the 3-byte OUI and the name for a vendor, and entries
such as:
00-00-0C-07-AC/40 All-HSRP-routers
can be specified, with a MAC address and a mask indicating how many bits of
the address must match. The above entry, for example, has 40 significant
bits, or 5 bytes, and would match addresses from 00-00-0C-07-AC-00 through
00-00-0C-07-AC-FF. The mask need not be a multiple of 8.
The manuf file is looked for in the same directory as the global
preferences file.
- Name Resolution (ipxnets)
- The ipxnets files are used to correlate 4-byte IPX
network numbers to names. First the global ipxnets file is tried
and if that address is not found there the personal one is tried next.
The format is the same as the ethers file, except that each address
is four bytes instead of six. Additionally, the address can be represented
as a single hexadecimal number, as is more common in the IPX world, rather
than four hex octets. For example, these four lines are valid lines of an
ipxnets file:
C0.A8.2C.00 HR
c0-a8-1c-00 CEO
00:00:BE:EF IT_Server1
110f FileServer3
The global ipxnets file is looked for in the /etc directory on
UNIX-compatible systems, and in the main installation directory (for
example, C:\Program Files\Wireshark) on Windows systems.
The personal ipxnets file is looked for in the same directory as the
personal preferences file.
ENVIRONMENT VARIABLES¶
- WIRESHARK_APPDATA
- On Windows, Wireshark normally stores all application data
in %APPDATA% or %USERPROFILE%. You can override the default location by
exporting this environment variable to specify an alternate location.
- WIRESHARK_DEBUG_EP_NO_CHUNKS
- Normally per-packet memory is allocated in large
"chunks." This behavior doesn't work well with debugging tools
such as Valgrind or ElectricFence. Export this environment variable to
force individual allocations. Note: disabling chunks also disables
canaries (see below).
- WIRESHARK_DEBUG_SE_NO_CHUNKS
- Normally per-file memory is allocated in large
"chunks." This behavior doesn't work well with debugging tools
such as Valgrind or ElectricFence. Export this environment variable to
force individual allocations. Note: disabling chunks also disables
canaries (see below).
- WIRESHARK_DEBUG_EP_NO_CANARY
- Normally per-packet memory allocations are separated by
"canaries" which allow detection of memory overruns. This comes
at the expense of some extra memory usage. Exporting this environment
variable disables these canaries.
- WIRESHARK_DEBUG_SE_USE_CANARY
- Exporting this environment variable causes per-file memory
allocations to be protected with "canaries" which allow for
detection of memory overruns. This comes at the expense of significant
extra memory usage.
- WIRESHARK_DEBUG_SCRUB_MEMORY
- If this environment variable is set, the contents of
per-packet and per-file memory is initialized to 0xBADDCAFE when the
memory is allocated and is reset to 0xDEADBEEF when the memory is freed.
This functionality is useful mainly to developers looking for bugs in the
way memory is handled.
- WIRESHARK_DEBUG_WMEM_OVERRIDE
- Setting this environment variable forces the wmem framework
to use the specified allocator backend for *all* allocations, regardless
of which backend is normally specified by the code. This is mainly useful
to developers when testing or debugging. See README.wmem in the
source distribution for details.
- WIRESHARK_RUN_FROM_BUILD_DIRECTORY
- This environment variable causes the plugins and other data
files to be loaded from the build directory (where the program was
compiled) rather than from the standard locations. It has no effect when
the program in question is running with root (or setuid) permissions on
*NIX.
- WIRESHARK_DATA_DIR
- This environment variable causes the various data files to
be loaded from a directory other than the standard locations. It has no
effect when the program in question is running with root (or setuid)
permissions on *NIX.
- WIRESHARK_PYTHON_DIR
- This environment variable points to an alternate location
for Python. It has no effect when the program in question is running with
root (or setuid) permissions on *NIX.
- ERF_RECORDS_TO_CHECK
- This environment variable controls the number of ERF
records checked when deciding if a file really is in the ERF format.
Setting this environment variable a number higher than the default (20)
would make false positives less likely.
- IPFIX_RECORDS_TO_CHECK
- This environment variable controls the number of IPFIX
records checked when deciding if a file really is in the IPFIX format.
Setting this environment variable a number higher than the default (20)
would make false positives less likely.
- WIRESHARK_ABORT_ON_DISSECTOR_BUG
- If this environment variable is set, TShark will
call abort(3) when a dissector bug is encountered. abort(3)
will cause the program to exit abnormally; if you are running
TShark in a debugger, it should halt in the debugger and allow
inspection of the process, and, if you are not running it in a debugger,
it will, on some OSes, assuming your environment is configured correctly,
generate a core dump file. This can be useful to developers attempting to
troubleshoot a problem with a protocol dissector.
- WIRESHARK_ABORT_ON_TOO_MANY_ITEMS
- If this environment variable is set, TShark will
call abort(3) if a dissector tries to add too many items to a tree
(generally this is an indication of the dissector not breaking out of a
loop soon enough). abort(3) will cause the program to exit
abnormally; if you are running TShark in a debugger, it should halt
in the debugger and allow inspection of the process, and, if you are not
running it in a debugger, it will, on some OSes, assuming your environment
is configured correctly, generate a core dump file. This can be useful to
developers attempting to troubleshoot a problem with a protocol
dissector.
- WIRESHARK_EP_VERIFY_POINTERS
- This environment variable, if present, causes certain uses
of pointers to be audited to ensure they do not point to memory that is
deallocated after each packet has been fully dissected. This can be useful
to developers writing or auditing code.
- WIRESHARK_SE_VERIFY_POINTERS
- This environment variable, if present, causes certain uses
of pointers to be audited to ensure they do not point to memory that is
deallocated after when a capture file is closed. This can be useful to
developers writing or auditing code.
- WIRESHARK_ABORT_ON_OUT_OF_MEMORY
- This environment variable, if present, causes
abort(3) to be called if certain out-of-memory conditions (which
normally result in an exception and an explanatory error message) are
experienced. This can be useful to developers debugging out-of-memory
conditions.
SEE ALSO¶
wireshark-filter(4),
wireshark(1),
editcap(1),
pcap(3),
dumpcap(1),
text2pcap(1),
mergecap(1),
pcap-filter(7) or
tcpdump(8)
NOTES¶
TShark is part of the
Wireshark distribution. The latest version
of
Wireshark can be found at <
http://www.wireshark.org>.
HTML versions of the Wireshark project man pages are available at:
http://www.wireshark.org/docs/man-pages
<
http://www.wireshark.org/docs/man-pages>.
AUTHORS¶
TShark uses the same packet dissection code that
Wireshark does,
as well as using many other modules from
Wireshark; see the list of
authors in the
Wireshark man page for a list of authors of that
code.