NAME¶

config2cfg - Atheros Configuration File Converter

SYNOPSIS¶

config2cfg [options] file [file] [...]

DESCRIPTION¶

The config2cfg program converts an SDRAM configuration file used by the Windows Device Manager to the configuration file format used by the Qualcomm Atheros Powerline Toolkit.

This program is part of the Qualcomm Atheros Powerline Toolkit. See the AMP man page for an overview and installation instructions.

OPTIONS¶

There are no options.

EXPLANATION¶

The Windows Device Manager format consists of 64 ASCII hexadecomal characters. Files usually have a .config extension. File size is at least 64 characters. Excess characters are ignored in input. This means that files can be modified using any text editor and there is no way to detect modification. From a programmin standpoint, ASCII-to-binary convertion and checksum computation is required on input and binary-to-ASCII conversion iw required on output.

The Atheros Powerline Toolkit format consists of 32 binary bytes plus a 4 byte (32 bit) checksum. Files usually have a .cfg extension. File size is always 36 characters. The files can be edited using any hex editor but a new checksum must be computed and inserted after any change. No conversion or computation is required on input or output. Input is ready for direct insertion into a VS_SET_SDRAM message.

Programs int6k and int6kf expect this latter format and so you can use this program determine if a given file has the proper format.

OPTIONS¶

file

The filename of a Windows Device Manager SDRAM configuration file. The file is re-written such that the filename is preserved but the contents are not. Windows Device Manager SDRAM configuration files usually have a .config extension but the program makes no assumption based on filename and does not enforce any filename conventions.

-q

Suppresses printing of progress messages. There are no progress messages in this version.

-v

Print additional information. There is no additional information printed in this version.

-?, --help

Print program help summary on stdout. This option takes precedence over other options on the command line.

-!, --version

Print program version information on stdout. This option takes precedence over other options on the command line. Use this option when sending screen dumps to Atheros Technical Support so that they know exactly which version of the Linux Toolkit you are using.

EXAMPLES¶

The following example reads file abc.cfg and validates it. The message shown indicates that the configuration file is the correct size and has a checksums and there are no read errors.

> chkcfg abc.cfg
chkcfg: abc.cfg looks good

The following example reads three files in succession and reports on each one. You can suppress good news with the -q option.

# chkcfg abc.cfg def.cfg ghi.cfg
chkcfg: abc.cfg looks good
chkcfg: def.cfg is corrupt
chkcfg: ghi.cfg looks good

The following example displays the SDRAM configuration values in all files having names that match the wildcard pattern sdram*.cfg. We can confirm that the values inside are correct for their filenames. Program output could have been sent to a file and saved for later reference.

# chknvm -qv sdram*.cfg
------- sdram32.cfg -------
SIZE=0x02000000 (32mb)
CONF=0x00143188
TIM0=0x01E1D491
TIM1=0x000883D6
CNTRL=0x00003089
REF=0x00000366
CLOCK=0x00000001
------- sdram16.cfg -------
SIZE=0x01000000 (16mb)
CONF=0x00142F68
TIM0=0x0115124E
TIM1=0x000883D6
CNTRL=0x00003089
REF=0x00000493
CLOCK=0x00000001

DISCLAIMER¶

The SDRAM file structure and content is proprietary to Qualcomm Atheros, Ocala FL USA. Consequently, public information is not available. Qualcomm Atheros reserves the right to change the file structure or content in future firmware releases without any obligation to notify or compensate users of this program.

SEE ALSO¶

int6k(1), int6kf(1), modpib(1), chknvm(1), chkpib(1)

CREDITS¶

Charles Maier