NAME¶

onvif-util - query and adjust onvif compatible cameras

SYNOPSIS¶

  onvif-util [-ah] [-u <user>] [-p <password>] [ip_address]

DESCRIPTION¶

View and set parameters on onvif compatible IP cameras. The command may be used to find and identify cameras, and then to create an interactive session that can be used to query and set camera properties.

-a, --all show all cameras on the network

-h, --help show the help for this command

-u, --user set the username for the camera login

-p, --password set the password for the camera login

To view all cameras on the network: onvif-util -a

To login to a particular camera: onvif-util -u username -p password ip_address

To login to a camera with safe mode disabled: onvif-util -s -u username -p password ip_address

Once logged into the camera you can view data using the 'get' command followed by the data requested. The (n) indicates an optional profile index to apply the setting, otherwise the current profile is used

        Data Retrieval Commands (start with get)


        get rtsp 'pass'(optional) (n) - Get rtsp uri for camera, with optional password credential


        get capabilities


        get time


        get profiles


        get profile (n)


        get video (n)


        get video options (n)


        get imaging


        get imaging options


        get network


        Parameter Setting Commands (start with set)


        set resolution (n) - Resolution setting in the format widthxheight, must match option


        set framerate (n)


        set gov_length (n)


        set bitrate (n)


        set bightness value(required)


        set contrast value(required)


        set saturation value(required)


        set sharpness value(required)


        set ip_address value(required)


        set default_gateway value(required)


        set dns value(required)


        set dhcp value(required) - Accepted settings are 'on' and off'


        set password  value(required)


        Maintenance Commands


        help


        safe - set safe mode on.  Viewer and browser are disabled


        unsafe - set safe mode off.  Viewer and browser are enabled


        browser - Use browser to access camera configurations


        view (n) - View the camera output using ffplay (ffplay must be installed in the path)


        view player (n) - View the camera output with user specified player e.g. view vlc


        sync_time 'zone'(optional) - Sync the camera time to the computer


        dump - Full set of raw data from camera configuration


        reboot


        To Exit Camera Session


        quit

EXAMPLES¶

A typical session would begin by finding the cameras on the network

> onvif-util -a

      Looking for cameras on the network...


      Found 8 cameras


      192.168.1.18 localhost(TV TV-IP319PI)


      192.168.1.7 (IPC-BO IPC-122)


      192.168.1.14 IPC(Dahua IPC-HDW4631C-A)


      192.168.1.6 IPC(Amcrest IP2M-841EB)


      192.168.1.12 (AXIS M1065-LW)


      192.168.1.12 (AXIS M1065-LW)


      192.168.1.2 IPC(Amcrest IP3M-HX2W)


      192.168.1.11 R2(IPC-model)

> onvif-util -u admin -p admin123 192.168.1.12

      found host: 192.168.1.12


      successfully connected to host


        name:   AXIS M1065-LW


        serial: ACCC8E99C915

> get video

      Profile set to profile_1_h264


      Resolution: 1920 x 1080


      Frame Rate: 25


      Gov Length: 30


      Bit Rate:   4096

> get video options

      Available Resolutions


        1920 x 1080


        1280 x 720


        640 x 480


        320 x 240


      Min Gov Length: 1


      Max Gov Length: 32767


      Min Frame Rate: 1


      Max Frame Rate: 30


      Min Bit Rate: 1


      Max Bit Rate: 2147483647

> set resolution 1280x720

      Resolution was set to 1280 x 720

> quit

COPYRIGHT¶

Copyright (c) 2020 Stephen Rhodes

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.

SEE ALSO¶

There is a gui version of this program included with the libonvif package which will implement most of the same commands. It may be invoked using the 'onvif' command. The gui has the ability to view camera video output using a player such as ffplay, provided that the player executable is installed in the computer path.

NOTES¶

Camera compliance with the onvif standard is often incomplete and in some cases incorrect. Success with the onvif-util may be limited in many cases. Cameras made by Hikvision will have the greatest level of compatibility with onvif-util. Cameras made by Dahua will have a close degree of compatibility with some notable exceptions regarding gateway and DNS settings. Time settings may not be reliable in some cases. If the time is set without the zone flag, the time appearing in the camera feed will be synced to the computer time. If the time zone flag is used, the displayed time may be set to an offset from the computer time based on the timezone setting of the camera.

If the camera DNS setting is properly onvif compliant, the IP address may be reliably set using onvif-util. Some cameras may not respond to the DNS setting requested by onvif-util due to non compliance. Note that the camera may reboot automatically under some conditions if the DNS setting is changed from off to on.

Video settings are reliable. The Admin Password setting is reliable, as well as sync_time and the reboot command. If there is an issue with a particular setting, it is recommended to connect to the camera using the browser command, as most cameras will have a web interface that will allow you to make the changes reliably. The gui version has a button on the Admin tab that will launch the web browser with the camera ip address automatically.