table of contents
| tgevc(3) | LAPACK | tgevc(3) |
NAME¶
tgevc - tgevc: eigvec of pair of matrices
SYNOPSIS¶
Functions¶
subroutine ctgevc (side, howmny, select, n, s, lds, p, ldp,
vl, ldvl, vr, ldvr, mm, m, work, rwork, info)
CTGEVC subroutine dtgevc (side, howmny, select, n, s, lds, p,
ldp, vl, ldvl, vr, ldvr, mm, m, work, info)
DTGEVC subroutine stgevc (side, howmny, select, n, s, lds, p,
ldp, vl, ldvl, vr, ldvr, mm, m, work, info)
STGEVC subroutine ztgevc (side, howmny, select, n, s, lds, p,
ldp, vl, ldvl, vr, ldvr, mm, m, work, rwork, info)
ZTGEVC
Detailed Description¶
Function Documentation¶
subroutine ctgevc (character side, character howmny, logical, dimension( * ) select, integer n, complex, dimension( lds, * ) s, integer lds, complex, dimension( ldp, * ) p, integer ldp, complex, dimension( ldvl, * ) vl, integer ldvl, complex, dimension( ldvr, * ) vr, integer ldvr, integer mm, integer m, complex, dimension( * ) work, real, dimension( * ) rwork, integer info)¶
CTGEVC
Purpose:
CTGEVC computes some or all of the right and/or left eigenvectors of
a pair of complex matrices (S,P), where S and P are upper triangular.
Matrix pairs of this type are produced by the generalized Schur
factorization of a complex matrix pair (A,B):
A = Q*S*Z**H, B = Q*P*Z**H
as computed by CGGHRD + CHGEQZ.
The right eigenvector x and the left eigenvector y of (S,P)
corresponding to an eigenvalue w are defined by:
S*x = w*P*x, (y**H)*S = w*(y**H)*P,
where y**H denotes the conjugate transpose of y.
The eigenvalues are not input to this routine, but are computed
directly from the diagonal elements of S and P.
This routine returns the matrices X and/or Y of right and left
eigenvectors of (S,P), or the products Z*X and/or Q*Y,
where Z and Q are input matrices.
If Q and Z are the unitary factors from the generalized Schur
factorization of a matrix pair (A,B), then Z*X and Q*Y
are the matrices of right and left eigenvectors of (A,B).
Parameters
SIDE
SIDE is CHARACTER*1
= 'R': compute right eigenvectors only;
= 'L': compute left eigenvectors only;
= 'B': compute both right and left eigenvectors.
HOWMNY
HOWMNY is CHARACTER*1
= 'A': compute all right and/or left eigenvectors;
= 'B': compute all right and/or left eigenvectors,
backtransformed by the matrices in VR and/or VL;
= 'S': compute selected right and/or left eigenvectors,
specified by the logical array SELECT.
SELECT
SELECT is LOGICAL array, dimension (N)
If HOWMNY='S', SELECT specifies the eigenvectors to be
computed. The eigenvector corresponding to the j-th
eigenvalue is computed if SELECT(j) = .TRUE..
Not referenced if HOWMNY = 'A' or 'B'.
N
N is INTEGER
The order of the matrices S and P. N >= 0.
S
S is COMPLEX array, dimension (LDS,N)
The upper triangular matrix S from a generalized Schur
factorization, as computed by CHGEQZ.
LDS
LDS is INTEGER
The leading dimension of array S. LDS >= max(1,N).
P
P is COMPLEX array, dimension (LDP,N)
The upper triangular matrix P from a generalized Schur
factorization, as computed by CHGEQZ. P must have real
diagonal elements.
LDP
LDP is INTEGER
The leading dimension of array P. LDP >= max(1,N).
VL
VL is COMPLEX array, dimension (LDVL,MM)
On entry, if SIDE = 'L' or 'B' and HOWMNY = 'B', VL must
contain an N-by-N matrix Q (usually the unitary matrix Q
of left Schur vectors returned by CHGEQZ).
On exit, if SIDE = 'L' or 'B', VL contains:
if HOWMNY = 'A', the matrix Y of left eigenvectors of (S,P);
if HOWMNY = 'B', the matrix Q*Y;
if HOWMNY = 'S', the left eigenvectors of (S,P) specified by
SELECT, stored consecutively in the columns of
VL, in the same order as their eigenvalues.
Not referenced if SIDE = 'R'.
LDVL
LDVL is INTEGER
The leading dimension of array VL. LDVL >= 1, and if
SIDE = 'L' or 'l' or 'B' or 'b', LDVL >= N.
VR
VR is COMPLEX array, dimension (LDVR,MM)
On entry, if SIDE = 'R' or 'B' and HOWMNY = 'B', VR must
contain an N-by-N matrix Z (usually the unitary matrix Z
of right Schur vectors returned by CHGEQZ).
On exit, if SIDE = 'R' or 'B', VR contains:
if HOWMNY = 'A', the matrix X of right eigenvectors of (S,P);
if HOWMNY = 'B', the matrix Z*X;
if HOWMNY = 'S', the right eigenvectors of (S,P) specified by
SELECT, stored consecutively in the columns of
VR, in the same order as their eigenvalues.
Not referenced if SIDE = 'L'.
LDVR
LDVR is INTEGER
The leading dimension of the array VR. LDVR >= 1, and if
SIDE = 'R' or 'B', LDVR >= N.
MM
MM is INTEGER
The number of columns in the arrays VL and/or VR. MM >= M.
M
M is INTEGER
The number of columns in the arrays VL and/or VR actually
used to store the eigenvectors. If HOWMNY = 'A' or 'B', M
is set to N. Each selected eigenvector occupies one column.
WORK
WORK is COMPLEX array, dimension (2*N)
RWORK
RWORK is REAL array, dimension (2*N)
INFO
INFO is INTEGER
= 0: successful exit.
< 0: if INFO = -i, the i-th argument had an illegal value.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine dtgevc (character side, character howmny, logical, dimension( * ) select, integer n, double precision, dimension( lds, * ) s, integer lds, double precision, dimension( ldp, * ) p, integer ldp, double precision, dimension( ldvl, * ) vl, integer ldvl, double precision, dimension( ldvr, * ) vr, integer ldvr, integer mm, integer m, double precision, dimension( * ) work, integer info)¶
DTGEVC
Purpose:
DTGEVC computes some or all of the right and/or left eigenvectors of
a pair of real matrices (S,P), where S is a quasi-triangular matrix
and P is upper triangular. Matrix pairs of this type are produced by
the generalized Schur factorization of a matrix pair (A,B):
A = Q*S*Z**T, B = Q*P*Z**T
as computed by DGGHRD + DHGEQZ.
The right eigenvector x and the left eigenvector y of (S,P)
corresponding to an eigenvalue w are defined by:
S*x = w*P*x, (y**H)*S = w*(y**H)*P,
where y**H denotes the conjugate transpose of y.
The eigenvalues are not input to this routine, but are computed
directly from the diagonal blocks of S and P.
This routine returns the matrices X and/or Y of right and left
eigenvectors of (S,P), or the products Z*X and/or Q*Y,
where Z and Q are input matrices.
If Q and Z are the orthogonal factors from the generalized Schur
factorization of a matrix pair (A,B), then Z*X and Q*Y
are the matrices of right and left eigenvectors of (A,B).
Parameters
SIDE
SIDE is CHARACTER*1
= 'R': compute right eigenvectors only;
= 'L': compute left eigenvectors only;
= 'B': compute both right and left eigenvectors.
HOWMNY
HOWMNY is CHARACTER*1
= 'A': compute all right and/or left eigenvectors;
= 'B': compute all right and/or left eigenvectors,
backtransformed by the matrices in VR and/or VL;
= 'S': compute selected right and/or left eigenvectors,
specified by the logical array SELECT.
SELECT
SELECT is LOGICAL array, dimension (N)
If HOWMNY='S', SELECT specifies the eigenvectors to be
computed. If w(j) is a real eigenvalue, the corresponding
real eigenvector is computed if SELECT(j) is .TRUE..
If w(j) and w(j+1) are the real and imaginary parts of a
complex eigenvalue, the corresponding complex eigenvector
is computed if either SELECT(j) or SELECT(j+1) is .TRUE.,
and on exit SELECT(j) is set to .TRUE. and SELECT(j+1) is
set to .FALSE..
Not referenced if HOWMNY = 'A' or 'B'.
N
N is INTEGER
The order of the matrices S and P. N >= 0.
S
S is DOUBLE PRECISION array, dimension (LDS,N)
The upper quasi-triangular matrix S from a generalized Schur
factorization, as computed by DHGEQZ.
LDS
LDS is INTEGER
The leading dimension of array S. LDS >= max(1,N).
P
P is DOUBLE PRECISION array, dimension (LDP,N)
The upper triangular matrix P from a generalized Schur
factorization, as computed by DHGEQZ.
2-by-2 diagonal blocks of P corresponding to 2-by-2 blocks
of S must be in positive diagonal form.
LDP
LDP is INTEGER
The leading dimension of array P. LDP >= max(1,N).
VL
VL is DOUBLE PRECISION array, dimension (LDVL,MM)
On entry, if SIDE = 'L' or 'B' and HOWMNY = 'B', VL must
contain an N-by-N matrix Q (usually the orthogonal matrix Q
of left Schur vectors returned by DHGEQZ).
On exit, if SIDE = 'L' or 'B', VL contains:
if HOWMNY = 'A', the matrix Y of left eigenvectors of (S,P);
if HOWMNY = 'B', the matrix Q*Y;
if HOWMNY = 'S', the left eigenvectors of (S,P) specified by
SELECT, stored consecutively in the columns of
VL, in the same order as their eigenvalues.
A complex eigenvector corresponding to a complex eigenvalue
is stored in two consecutive columns, the first holding the
real part, and the second the imaginary part.
Not referenced if SIDE = 'R'.
LDVL
LDVL is INTEGER
The leading dimension of array VL. LDVL >= 1, and if
SIDE = 'L' or 'B', LDVL >= N.
VR
VR is DOUBLE PRECISION array, dimension (LDVR,MM)
On entry, if SIDE = 'R' or 'B' and HOWMNY = 'B', VR must
contain an N-by-N matrix Z (usually the orthogonal matrix Z
of right Schur vectors returned by DHGEQZ).
On exit, if SIDE = 'R' or 'B', VR contains:
if HOWMNY = 'A', the matrix X of right eigenvectors of (S,P);
if HOWMNY = 'B' or 'b', the matrix Z*X;
if HOWMNY = 'S' or 's', the right eigenvectors of (S,P)
specified by SELECT, stored consecutively in the
columns of VR, in the same order as their
eigenvalues.
A complex eigenvector corresponding to a complex eigenvalue
is stored in two consecutive columns, the first holding the
real part and the second the imaginary part.
Not referenced if SIDE = 'L'.
LDVR
LDVR is INTEGER
The leading dimension of the array VR. LDVR >= 1, and if
SIDE = 'R' or 'B', LDVR >= N.
MM
MM is INTEGER
The number of columns in the arrays VL and/or VR. MM >= M.
M
M is INTEGER
The number of columns in the arrays VL and/or VR actually
used to store the eigenvectors. If HOWMNY = 'A' or 'B', M
is set to N. Each selected real eigenvector occupies one
column and each selected complex eigenvector occupies two
columns.
WORK
WORK is DOUBLE PRECISION array, dimension (6*N)
INFO
INFO is INTEGER
= 0: successful exit.
< 0: if INFO = -i, the i-th argument had an illegal value.
> 0: the 2-by-2 block (INFO:INFO+1) does not have a complex
eigenvalue.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Further Details:
Allocation of workspace:
---------- -- ---------
WORK( j ) = 1-norm of j-th column of A, above the diagonal
WORK( N+j ) = 1-norm of j-th column of B, above the diagonal
WORK( 2*N+1:3*N ) = real part of eigenvector
WORK( 3*N+1:4*N ) = imaginary part of eigenvector
WORK( 4*N+1:5*N ) = real part of back-transformed eigenvector
WORK( 5*N+1:6*N ) = imaginary part of back-transformed eigenvector
Rowwise vs. columnwise solution methods:
------- -- ---------- -------- -------
Finding a generalized eigenvector consists basically of solving the
singular triangular system
(A - w B) x = 0 (for right) or: (A - w B)**H y = 0 (for left)
Consider finding the i-th right eigenvector (assume all eigenvalues
are real). The equation to be solved is:
n i
0 = sum C(j,k) v(k) = sum C(j,k) v(k) for j = i,. . .,1
k=j k=j
where C = (A - w B) (The components v(i+1:n) are 0.)
The 'rowwise' method is:
(1) v(i) := 1
for j = i-1,. . .,1:
i
(2) compute s = - sum C(j,k) v(k) and
k=j+1
(3) v(j) := s / C(j,j)
Step 2 is sometimes called the 'dot product' step, since it is an
inner product between the j-th row and the portion of the eigenvector
that has been computed so far.
The 'columnwise' method consists basically in doing the sums
for all the rows in parallel. As each v(j) is computed, the
contribution of v(j) times the j-th column of C is added to the
partial sums. Since FORTRAN arrays are stored columnwise, this has
the advantage that at each step, the elements of C that are accessed
are adjacent to one another, whereas with the rowwise method, the
elements accessed at a step are spaced LDS (and LDP) words apart.
When finding left eigenvectors, the matrix in question is the
transpose of the one in storage, so the rowwise method then
actually accesses columns of A and B at each step, and so is the
preferred method.
subroutine stgevc (character side, character howmny, logical, dimension( * ) select, integer n, real, dimension( lds, * ) s, integer lds, real, dimension( ldp, * ) p, integer ldp, real, dimension( ldvl, * ) vl, integer ldvl, real, dimension( ldvr, * ) vr, integer ldvr, integer mm, integer m, real, dimension( * ) work, integer info)¶
STGEVC
Purpose:
STGEVC computes some or all of the right and/or left eigenvectors of
a pair of real matrices (S,P), where S is a quasi-triangular matrix
and P is upper triangular. Matrix pairs of this type are produced by
the generalized Schur factorization of a matrix pair (A,B):
A = Q*S*Z**T, B = Q*P*Z**T
as computed by SGGHRD + SHGEQZ.
The right eigenvector x and the left eigenvector y of (S,P)
corresponding to an eigenvalue w are defined by:
S*x = w*P*x, (y**H)*S = w*(y**H)*P,
where y**H denotes the conjugate transpose of y.
The eigenvalues are not input to this routine, but are computed
directly from the diagonal blocks of S and P.
This routine returns the matrices X and/or Y of right and left
eigenvectors of (S,P), or the products Z*X and/or Q*Y,
where Z and Q are input matrices.
If Q and Z are the orthogonal factors from the generalized Schur
factorization of a matrix pair (A,B), then Z*X and Q*Y
are the matrices of right and left eigenvectors of (A,B).
Parameters
SIDE
SIDE is CHARACTER*1
= 'R': compute right eigenvectors only;
= 'L': compute left eigenvectors only;
= 'B': compute both right and left eigenvectors.
HOWMNY
HOWMNY is CHARACTER*1
= 'A': compute all right and/or left eigenvectors;
= 'B': compute all right and/or left eigenvectors,
backtransformed by the matrices in VR and/or VL;
= 'S': compute selected right and/or left eigenvectors,
specified by the logical array SELECT.
SELECT
SELECT is LOGICAL array, dimension (N)
If HOWMNY='S', SELECT specifies the eigenvectors to be
computed. If w(j) is a real eigenvalue, the corresponding
real eigenvector is computed if SELECT(j) is .TRUE..
If w(j) and w(j+1) are the real and imaginary parts of a
complex eigenvalue, the corresponding complex eigenvector
is computed if either SELECT(j) or SELECT(j+1) is .TRUE.,
and on exit SELECT(j) is set to .TRUE. and SELECT(j+1) is
set to .FALSE..
Not referenced if HOWMNY = 'A' or 'B'.
N
N is INTEGER
The order of the matrices S and P. N >= 0.
S
S is REAL array, dimension (LDS,N)
The upper quasi-triangular matrix S from a generalized Schur
factorization, as computed by SHGEQZ.
LDS
LDS is INTEGER
The leading dimension of array S. LDS >= max(1,N).
P
P is REAL array, dimension (LDP,N)
The upper triangular matrix P from a generalized Schur
factorization, as computed by SHGEQZ.
2-by-2 diagonal blocks of P corresponding to 2-by-2 blocks
of S must be in positive diagonal form.
LDP
LDP is INTEGER
The leading dimension of array P. LDP >= max(1,N).
VL
VL is REAL array, dimension (LDVL,MM)
On entry, if SIDE = 'L' or 'B' and HOWMNY = 'B', VL must
contain an N-by-N matrix Q (usually the orthogonal matrix Q
of left Schur vectors returned by SHGEQZ).
On exit, if SIDE = 'L' or 'B', VL contains:
if HOWMNY = 'A', the matrix Y of left eigenvectors of (S,P);
if HOWMNY = 'B', the matrix Q*Y;
if HOWMNY = 'S', the left eigenvectors of (S,P) specified by
SELECT, stored consecutively in the columns of
VL, in the same order as their eigenvalues.
A complex eigenvector corresponding to a complex eigenvalue
is stored in two consecutive columns, the first holding the
real part, and the second the imaginary part.
Not referenced if SIDE = 'R'.
LDVL
LDVL is INTEGER
The leading dimension of array VL. LDVL >= 1, and if
SIDE = 'L' or 'B', LDVL >= N.
VR
VR is REAL array, dimension (LDVR,MM)
On entry, if SIDE = 'R' or 'B' and HOWMNY = 'B', VR must
contain an N-by-N matrix Z (usually the orthogonal matrix Z
of right Schur vectors returned by SHGEQZ).
On exit, if SIDE = 'R' or 'B', VR contains:
if HOWMNY = 'A', the matrix X of right eigenvectors of (S,P);
if HOWMNY = 'B' or 'b', the matrix Z*X;
if HOWMNY = 'S' or 's', the right eigenvectors of (S,P)
specified by SELECT, stored consecutively in the
columns of VR, in the same order as their
eigenvalues.
A complex eigenvector corresponding to a complex eigenvalue
is stored in two consecutive columns, the first holding the
real part and the second the imaginary part.
Not referenced if SIDE = 'L'.
LDVR
LDVR is INTEGER
The leading dimension of the array VR. LDVR >= 1, and if
SIDE = 'R' or 'B', LDVR >= N.
MM
MM is INTEGER
The number of columns in the arrays VL and/or VR. MM >= M.
M
M is INTEGER
The number of columns in the arrays VL and/or VR actually
used to store the eigenvectors. If HOWMNY = 'A' or 'B', M
is set to N. Each selected real eigenvector occupies one
column and each selected complex eigenvector occupies two
columns.
WORK
WORK is REAL array, dimension (6*N)
INFO
INFO is INTEGER
= 0: successful exit.
< 0: if INFO = -i, the i-th argument had an illegal value.
> 0: the 2-by-2 block (INFO:INFO+1) does not have a complex
eigenvalue.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Further Details:
Allocation of workspace:
---------- -- ---------
WORK( j ) = 1-norm of j-th column of A, above the diagonal
WORK( N+j ) = 1-norm of j-th column of B, above the diagonal
WORK( 2*N+1:3*N ) = real part of eigenvector
WORK( 3*N+1:4*N ) = imaginary part of eigenvector
WORK( 4*N+1:5*N ) = real part of back-transformed eigenvector
WORK( 5*N+1:6*N ) = imaginary part of back-transformed eigenvector
Rowwise vs. columnwise solution methods:
------- -- ---------- -------- -------
Finding a generalized eigenvector consists basically of solving the
singular triangular system
(A - w B) x = 0 (for right) or: (A - w B)**H y = 0 (for left)
Consider finding the i-th right eigenvector (assume all eigenvalues
are real). The equation to be solved is:
n i
0 = sum C(j,k) v(k) = sum C(j,k) v(k) for j = i,. . .,1
k=j k=j
where C = (A - w B) (The components v(i+1:n) are 0.)
The 'rowwise' method is:
(1) v(i) := 1
for j = i-1,. . .,1:
i
(2) compute s = - sum C(j,k) v(k) and
k=j+1
(3) v(j) := s / C(j,j)
Step 2 is sometimes called the 'dot product' step, since it is an
inner product between the j-th row and the portion of the eigenvector
that has been computed so far.
The 'columnwise' method consists basically in doing the sums
for all the rows in parallel. As each v(j) is computed, the
contribution of v(j) times the j-th column of C is added to the
partial sums. Since FORTRAN arrays are stored columnwise, this has
the advantage that at each step, the elements of C that are accessed
are adjacent to one another, whereas with the rowwise method, the
elements accessed at a step are spaced LDS (and LDP) words apart.
When finding left eigenvectors, the matrix in question is the
transpose of the one in storage, so the rowwise method then
actually accesses columns of A and B at each step, and so is the
preferred method.
subroutine ztgevc (character side, character howmny, logical, dimension( * ) select, integer n, complex*16, dimension( lds, * ) s, integer lds, complex*16, dimension( ldp, * ) p, integer ldp, complex*16, dimension( ldvl, * ) vl, integer ldvl, complex*16, dimension( ldvr, * ) vr, integer ldvr, integer mm, integer m, complex*16, dimension( * ) work, double precision, dimension( * ) rwork, integer info)¶
ZTGEVC
Purpose:
ZTGEVC computes some or all of the right and/or left eigenvectors of
a pair of complex matrices (S,P), where S and P are upper triangular.
Matrix pairs of this type are produced by the generalized Schur
factorization of a complex matrix pair (A,B):
A = Q*S*Z**H, B = Q*P*Z**H
as computed by ZGGHRD + ZHGEQZ.
The right eigenvector x and the left eigenvector y of (S,P)
corresponding to an eigenvalue w are defined by:
S*x = w*P*x, (y**H)*S = w*(y**H)*P,
where y**H denotes the conjugate transpose of y.
The eigenvalues are not input to this routine, but are computed
directly from the diagonal elements of S and P.
This routine returns the matrices X and/or Y of right and left
eigenvectors of (S,P), or the products Z*X and/or Q*Y,
where Z and Q are input matrices.
If Q and Z are the unitary factors from the generalized Schur
factorization of a matrix pair (A,B), then Z*X and Q*Y
are the matrices of right and left eigenvectors of (A,B).
Parameters
SIDE
SIDE is CHARACTER*1
= 'R': compute right eigenvectors only;
= 'L': compute left eigenvectors only;
= 'B': compute both right and left eigenvectors.
HOWMNY
HOWMNY is CHARACTER*1
= 'A': compute all right and/or left eigenvectors;
= 'B': compute all right and/or left eigenvectors,
backtransformed by the matrices in VR and/or VL;
= 'S': compute selected right and/or left eigenvectors,
specified by the logical array SELECT.
SELECT
SELECT is LOGICAL array, dimension (N)
If HOWMNY='S', SELECT specifies the eigenvectors to be
computed. The eigenvector corresponding to the j-th
eigenvalue is computed if SELECT(j) = .TRUE..
Not referenced if HOWMNY = 'A' or 'B'.
N
N is INTEGER
The order of the matrices S and P. N >= 0.
S
S is COMPLEX*16 array, dimension (LDS,N)
The upper triangular matrix S from a generalized Schur
factorization, as computed by ZHGEQZ.
LDS
LDS is INTEGER
The leading dimension of array S. LDS >= max(1,N).
P
P is COMPLEX*16 array, dimension (LDP,N)
The upper triangular matrix P from a generalized Schur
factorization, as computed by ZHGEQZ. P must have real
diagonal elements.
LDP
LDP is INTEGER
The leading dimension of array P. LDP >= max(1,N).
VL
VL is COMPLEX*16 array, dimension (LDVL,MM)
On entry, if SIDE = 'L' or 'B' and HOWMNY = 'B', VL must
contain an N-by-N matrix Q (usually the unitary matrix Q
of left Schur vectors returned by ZHGEQZ).
On exit, if SIDE = 'L' or 'B', VL contains:
if HOWMNY = 'A', the matrix Y of left eigenvectors of (S,P);
if HOWMNY = 'B', the matrix Q*Y;
if HOWMNY = 'S', the left eigenvectors of (S,P) specified by
SELECT, stored consecutively in the columns of
VL, in the same order as their eigenvalues.
Not referenced if SIDE = 'R'.
LDVL
LDVL is INTEGER
The leading dimension of array VL. LDVL >= 1, and if
SIDE = 'L' or 'l' or 'B' or 'b', LDVL >= N.
VR
VR is COMPLEX*16 array, dimension (LDVR,MM)
On entry, if SIDE = 'R' or 'B' and HOWMNY = 'B', VR must
contain an N-by-N matrix Z (usually the unitary matrix Z
of right Schur vectors returned by ZHGEQZ).
On exit, if SIDE = 'R' or 'B', VR contains:
if HOWMNY = 'A', the matrix X of right eigenvectors of (S,P);
if HOWMNY = 'B', the matrix Z*X;
if HOWMNY = 'S', the right eigenvectors of (S,P) specified by
SELECT, stored consecutively in the columns of
VR, in the same order as their eigenvalues.
Not referenced if SIDE = 'L'.
LDVR
LDVR is INTEGER
The leading dimension of the array VR. LDVR >= 1, and if
SIDE = 'R' or 'B', LDVR >= N.
MM
MM is INTEGER
The number of columns in the arrays VL and/or VR. MM >= M.
M
M is INTEGER
The number of columns in the arrays VL and/or VR actually
used to store the eigenvectors. If HOWMNY = 'A' or 'B', M
is set to N. Each selected eigenvector occupies one column.
WORK
WORK is COMPLEX*16 array, dimension (2*N)
RWORK
RWORK is DOUBLE PRECISION array, dimension (2*N)
INFO
INFO is INTEGER
= 0: successful exit.
< 0: if INFO = -i, the i-th argument had an illegal value.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Author¶
Generated automatically by Doxygen for LAPACK from the source code.
| Wed Feb 7 2024 11:30:40 | Version 3.12.0 |