Scroll to navigation

IO::Termios(3pm) User Contributed Perl Documentation IO::Termios(3pm)

NAME

"IO::Termios" - supply termios(3) methods to "IO::Handle" objects

SYNOPSIS

   use IO::Termios;
   my $term = IO::Termios->open( "/dev/ttyS0", "9600,8,n,1" )
      or die "Cannot open ttyS0 - $!";
   $term->print( "Hello world\n" ); # Still an IO::Handle
   while( <$term> ) {
      print "A line from ttyS0: $_";
   }

DESCRIPTION

This class extends the generic "IO::Handle" object class by providing methods which access the system's terminal control termios(3) operations. These methods are primarily of interest when dealing with TTY devices, including serial ports.

The flag-setting methods will apply to any TTY device, such as a pseudo-tty, and are useful for controlling such flags as the "ECHO" flag, to disable local echo.

   my $stdin = IO::Termios->new( \*STDIN );
   $stdin->setflag_echo( 0 );

When dealing with a serial port the line mode method is useful for setting the basic serial parameters such as baud rate, and the modem line control methods can be used to access the hardware handshaking lines.

   my $ttyS0 = IO::Termios->open( "/dev/ttyS0" );
   $ttyS0->set_mode( "19200,8,n,1" );
   $ttyS0->set_modem({ dsr => 1, cts => 1 });

Upgrading STDIN/STDOUT/STDERR

If you pass the "-upgrade" option at "import" time, any of STDIN, STDOUT or STDERR that are found to be TTY wrappers are automatically upgraded into "IO::Termios" instances.

   use IO::Termios -upgrade;
   STDIN->setflag_echo(0);

Arbitrary Baud Rates on Linux

Linux supports a non-POSIX extension to the usual "termios" interface, which allows arbitrary baud rates to be set. "IO::Termios" can automatically make use of this ability if the Linux::Termios2 module is installed. If so, this will be used automatically and transparently, to allow the "set*baud" methods to set any rate allowed by the kernel/driver. If not, then only the POSIX-compatible rates may be used.

CONSTRUCTORS

new

   $term = IO::Termios->new()

Construct a new "IO::Termios" object around the terminal for the program. This is found by checking if any of "STDIN", "STDOUT" or "STDERR" are a terminal. The first one that's found is used. An error occurs if no terminal can be found by this method.

new (handle)

   $term = IO::Termios->new( $handle )

Construct a new "IO::Termios" object around the given filehandle.

open

   $term = IO::Termios->open( $path, $modestr, $flags )

Open the given path, and return a new "IO::Termios" object around the filehandle. If the "open" call fails, "undef" is returned.

If $modestr is provided, the constructor will pass it to the "set_mode" method before returning.

If $flags is provided, it will be passed on to the underlying "sysopen()" call used to open the filehandle. It should contain a bitwise-or combination of "O_*" flags from the Fcntl module - for example "O_NOCTTY" or "O_NDELAY". The value "O_RDWR" will be added to this; the caller does not need to specify it directly. For example:

   use Fcntl qw( O_NOCTTY O_NDELAY );
   $term = IO::Termios->open( "/dev/ttyS0", O_NOCTTY|O_NDELAY );
   $term->setflag_clocal( 1 );
   $term->blocking( 1 );

METHODS

getattr

   $attrs = $term->getattr

Makes a "tcgetattr()" call on the underlying filehandle, and returns a "IO::Termios::Attrs" object.

If the "tcgetattr()" call fails, "undef" is returned.

setattr

   $term->setattr( $attrs )

Makes a "tcsetattr()" call on the underlying file handle, setting attributes from the given "IO::Termios::Attrs" object.

If the "tcsetattr()" call fails, "undef" is returned. Otherwise, a true value is returned.

set_mode

get_mode

   $term->set_mode( $modestr )
   $modestr = $term->get_mode

Accessor for the derived "mode string", which is a comma-joined concatenation of the baud rate, character size, parity mode, and stop size in a format such as

   19200,8,n,1

When setting the mode string, trailing components may be omitted meaning their value will not be affected.

tiocmget

tiocmset

   $bits = $term->tiocmget
   $term->tiocmset( $bits )

Accessor for the modem line control bits. Takes or returns a bitmask of values.

tiocmbic

tiocmbis

   $term->tiocmbic( $bits )
   $term->tiocmbis( $bits )

Bitwise mutator methods for the modem line control bits. "tiocmbic" will clear just the bits provided and leave the others unchanged; "tiocmbis" will set them.

get_modem

   $flags = $term->get_modem

Returns a hash reference containing named flags corresponding to the modem line control bits. Any bit that is set will yield a key in the returned hash of the same name. The bit names are

   dtr dsr rts cts cd ri

set_modem

   $term->set_modem( $flags )

Changes the modem line control bit flags as given by the hash reference. Each bit to be changed should be represented by a key in the $flags hash of the names given above. False values will be cleared, true values will be set. Other flags will not be altered.

getmodem_BIT

setmodem_BIT

   $set = $term->getmodem_BIT
   $term->setmodem_BIT( $set )

Accessor methods for each of the modem line control bits. A set of methods exists for each of the named modem control bits given above.

FLAG-ACCESSOR METHODS

Theses methods are implemented in terms of the lower level methods, but provide an interface which is more abstract, and easier to re-implement on other non-POSIX systems. These should be used in preference to the lower ones.

For efficiency, when getting or setting a large number of flags, it may be more efficient to call "getattr", then operate on the returned object, before possibly passing it to "setattr". The returned "IO::Termios::Attrs" object supports the same methods as documented here.

The following two sections of code are therefore equivalent, though the latter is more efficient as it only calls "setattr" once.

   $term->setbaud( 38400 );
   $term->setcsize( 8 );
   $term->setparity( 'n' );
   $term->setstop( 1 );

   my $attrs = $term->getattr;
   $attrs->setbaud( 38400 );
   $attrs->setcsize( 8 );
   $attrs->setparity( 'n' );
   $attrs->setstop( 1 );
   $term->setattr( $attrs );

However, a convenient shortcut method is provided for the common case of setting the baud rate, character size, parity and stop size all at the same time. This is "set_mode":

   $term->set_mode( "38400,8,n,1" );

getibaud

getobaud

setibaud

setobaud

setbaud

   $baud = $term->getibaud
   $baud = $term->getobaud
   $term->setibaud( $baud )
   $term->setobaud( $baud )
   $term->setbaud( $baud )

Convenience accessors for the "ispeed" and "ospeed". $baud is an integer directly giving the line rate, instead of one of the "Bnnn" constants.

getcsize

setcsize

   $bits = $term->getcsize
   $term->setcsize( $bits )

Convenience accessor for the "CSIZE" bits of "c_cflag". $bits is an integer 5 to 8.

getparity

setparity

   $parity = $term->getparity
   $term->setparity( $parity )

Convenience accessor for the "PARENB" and "PARODD" bits of "c_cflag". $parity is "n", "o" or "e".

getstop

setstop

   $stop = $term->getstop
   $term->setstop( $stop )

Convenience accessor for the "CSTOPB" bit of "c_cflag". $stop is 1 or 2.

cfmakeraw

   $term->cfmakeraw

Since version 0.07.

Adjusts several bit flags to put the terminal into a "raw" mode. Input is available a character at a time, echo is disabled, and all special processing of input and output characters is disabled.

getflag_FLAG

setflag_FLAG

   $mode = $term->getflag_FLAG
   $term->setflag_FLAG( $mode )

Accessors for various control flags. The following methods are defined for specific flags:

inlcr

Since version 0.09.

The "INLCR" bit of the "c_iflag". This translates NL to CR on input.

igncr

Since version 0.09.

The "IGNCR" bit of the "c_iflag". This ignores incoming CR characters.

icrnl

Since version 0.09.

The "ICRNL" bit of the "c_iflag". This translates CR to NL on input, unless "IGNCR" is also set.

ignbrk

Since version 0.09.

The "IGNBRK" bit of the "c_iflag". This controls whether incoming break conditions are ignored entirely.

brkint

Since version 0.09.

The "BRKINT" bit of the "c_iflag". This controls whether non-ignored incoming break conditions result in a "SIGINT" signal being delivered to the process. If not, such a condition reads as a nul byte.

parmrk

Since version 0.09.

The "PARMRK" bit of the "c_iflag". This controls how parity errors and break conditions are handled.

opost

Since version 0.07.

The "OPOST" bit of the "c_oflag". This enables system-specific post-processing on output.

cread

The "CREAD" bit of the "c_cflag". This enables the receiver.

hupcl

The "HUPCL" bit of the "c_cflag". This lowers the modem control lines after the last process closes the device.

clocal

The "CLOCAL" bit of the "c_cflag". This controls whether local mode is enabled; which if set, ignores modem control lines.

icanon

The "ICANON" bit of "c_lflag". This is called "canonical" mode and controls whether the terminal's line-editing feature will be used to return a whole line (if true), or if individual bytes from keystrokes will be returned as they are available (if false).

echo

The "ECHO" bit of "c_lflag". This controls whether input characters are echoed back to the terminal.

setflags

   $term->setflags( @flags )

Since version 0.09.

A convenient wrapper to calling multiple flag setting methods in a sequence.

Each flag is specified by name, in lower case, prefixed by either a "+" symbol to enable it, or "-" to disable. For example:

   $term->setflags( "+igncr", "+opost", "+clocal", "-echo" );

TODO

Adding more getflag_*/setflag_* convenience wrappers

SEE ALSO

IO::Tty - Import Tty control constants

AUTHOR

Paul Evans <leonerd@leonerd.org.uk>

2023-01-07 perl v5.36.0