Scroll to navigation

isochron-rcv(8) ISOCHRON isochron-rcv(8)

NAME

isochron-rcv - Start an isochron test in the role of a receiver

SYNOPSIS

isochron rcv [OPTIONS]

DESCRIPTION

This command starts a long-running process that listens for connections from an isochron sender, logs timestamps for the received test packets, and sends the logged data back.

OPTIONS

prints the short help message and exits
specify the network interface on which packets will be received
specify the destination MAC address used by the application for recognizing test packets. Can be either unicast or multicast. Necessary only for the L2 transport (plain Ethernet). Optional, the interface’s unicast MAC address is used by default.
specify the EtherType used by the application for recognizing test packets sent using the L2 transport. Optional, defaults to 0xdead.
specify the TCP port on which the receiver program is listening for incoming connections. This socket is used for management and statistics. Optional, defaults to port 5000.
specify the size of test frames. The size is counted from the first octet of the destination MAC address until the last octet of data before the FCS.
specify the IP address on which the receiver program is listening for incoming connections. This socket is used for management and statistics. Supports binding to a given network device using the address%device syntax (example: --stats-address ::%vrf0). Optional, defaults to ::, with a fallback to 0.0.0.0 if IPv6 is not available.
this option suppresses error messages regarding invalid test packets. Optional, defaults to false.
when set, the program requests the kernel to change its scheduling policy to SCHED_FIFO for the duration of the test.
when set, the program requests the kernel to change its scheduling policy to SCHED_RR for the duration of the test.
when either --sched-fifo or --sched-rr is used, the program requests the kernel to change its scheduling priority for the duration of the test.
the program uses the CLOCK_TAI time base for its timers and for all reported timestamps, and this option specifies the correction in seconds to apply to software timestamps, which are taken by the kernel in the CLOCK_REALTIME (UTC) time base. If this option is present, isochron will also change the kernel’s CLOCK_TAI offset to the specified value, to ensure that its timers fire correctly. If the option is absent, isochron queries the kernel’s CLOCK_TAI offset and attempts to use that. If isochron can also query the UTC offset from ptp4l’s TIME_PROPERTIES_DATA_SET using management messages, it does that and compares that offset to the kernel’s UTC offset. The UTC offset reported by ptp4l has the highest priority, and if the application detects that this is different from the kernel’s CLOCK_TAI offset, it changes the kernel offset to the value queried from ptp4l.
-2, --l2
this option specifies that the plain Ethernet transport should be used for the test packets. Optional, defaults to true unless the sender overrides this via the management socket.
-4, --l4
this option specifies that the UDP transport should be used for test packets. Optional, defaults to false unless the sender overrides this via the management socket.
isochron queries ptp4l’s state by creating and sending PTP management messages over a local UNIX domain socket. This option specifies the path of this socket in the filesystem. Optional, defaults to /var/run/ptp4l.
this option provides the domainNumber value to be used when constructing PTP management messages sent to the ptp4l process. It must coincide with the domainNumber used by ptp4l, otherwise it will not respond to management messages. Optional, defaults to 0.
this option provides the transportSpecific value to be used when constructing PTP management messages sent to the ptp4l process. It must coincide with the transportSpecific used by ptp4l, otherwise it will not respond to management messages. Optional, defaults to 0. Note that PTP variants such as IEEE 802.1AS/gPTP require this value to be set to a different value such as 1.
isochron monitors the synchronization quality between the NIC’s PTP Hardware Clock (PHC) and the system time by successively reading the system time, the PHC time and the system time again, several times in a row, and picking the group of 3 time readouts that took the least amount of time overall. This option specifies how many readouts should be performed before picking the fastest one. Optional, defaults to 5.

EXAMPLES

To start an isochron receiver with PTP synchronization:

ip link set eth0 up && ip addr add 192.168.100.2/24 dev eth0
ptp4l -i eth0 -2 -P --step_threshold 0.00002 &
phc2sys -a -rr --step_threshold 0.00002 &
isochron rcv \


    --interface eth0 \


    --quiet \


    --sched-rr \


    --sched-priority 98

AUTHOR

isochron was written by Vladimir Oltean <vladimir.oltean@nxp.com>

SEE ALSO

isochron(8) isochron-send(8) isochron-report(1)

COMMENTS

This man page was written using pandoc (http://pandoc.org/) by the same author.