Scroll to navigation

FENCE_AGENT(8) System Manager's Manual FENCE_AGENT(8)

NAME

fence_rcd_serial - rcd_serial fence agent

DESCRIPTION

fence_rcd_serial operates a serial cable that toggles a reset of an opposing server using the reset switch on its motherboard. The cable itself is simple with no power, network or moving parts. An example of the cable is available here: https://smcleod.net/rcd-stonith/ and the circuit design is available in the fence-agents src as SVG

fence_rcd_serial accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_rcd_serial can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.

Vendor URL: https://github.com/sammcj/fence_rcd_serial

PARAMETERS

Fencing action (Default Value: reboot)
Method to fence (onoff|cycle) (Default Value: cycle)
Port of the serial device (Default Value: /dev/ttyS0)
Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity.
Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).
Write debug information to given file
Display version information and exit
Display help and exit
Separator for plug parameter when specifying more than 1 plug (Default Value: ,)
Wait X seconds before fencing is started (Default Value: 0)
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
Wait X seconds for cmd prompt after login (Default Value: 5)
Test X seconds for status change after ON/OFF (Default Value: 20)
Wait X seconds after issuing ON/OFF (Default Value: 2)
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
Sleep X seconds between status calls during a STONITH action (Default Value: 1)
Count of attempts to retry power on (Default Value: 1)

ACTIONS

Reboot machine.
Check the health of fence device
Display the XML metadata describing this resource.

The operational behavior of this is not known.
Validate if all required parameters are entered.

STDIN PARAMETERS

Fencing action (Default Value: reboot)
Method to fence (onoff|cycle) (Default Value: cycle)
Port of the serial device (Default Value: /dev/ttyS0)
Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity.
Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).
Write debug information to given file Obsoletes: debug
Display version information and exit
Display help and exit
Separator for plug parameter when specifying more than 1 plug (Default Value: ,)
Wait X seconds before fencing is started (Default Value: 0)
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
Wait X seconds for cmd prompt after login (Default Value: 5)
Test X seconds for status change after ON/OFF (Default Value: 20)
Wait X seconds after issuing ON/OFF (Default Value: 2)
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
Sleep X seconds between status calls during a STONITH action (Default Value: 1)
Count of attempts to retry power on (Default Value: 1)
2009-10-20 fence_rcd_serial (Fence Agent)