Scroll to navigation

eg25-manager(5) File Formats Manual eg25-manager(5)

NAME

eg25-manager configuration file format

SYNOPSIS

eg25-manager uses toml formatted files for configuration.

Configurations are loaded from:

•/etc/eg25-manager/<compatible>.toml: User-provided overrides (optional)
•/usr/share/eg25-manager/<compatible>.toml: Default configuration (required)

SECTION: manager

General settings for eg25-manager.

poweron_delay int (microseconds)

Delay between de-asserting RESET and starting the PWRKEY sequence.

SECTION: suspend

Settings for how to handle suspend on the system where eg25-manager is running.

boot_timeout int (seconds)

Prevent the system from suspending for boot_timeout seconds to allow the modem to fully boot.

Default: 120 if unset or zero.

recovery_timeout int (seconds)

Amount of time to wait for the modem to reappear after suspend. If the timeout is reached the modem's USB connection will be reset.

Default: 9 if unset or zero.

SECTION: at

AT commands to send when different events happen, and where to send them to.

Each command has 4 possible elements:

•cmd: the AT command itself, which will be translated to "AT+`cmd`"
•subcmd: the subcommand in case a single AT command can be used to change multiple parameters, such as QCFG
•value: the command's argument(s), usually used to set the value of a specific parameter
•expect: the expected return value; the command is first executed without any value in order to query the current state. This state is then compared to the expect string; if they don't match, the command is then executed with value expect in order to set the parameter to the expected value

A command can have expect OR value configured, but it shouldn't have both

NOTE: If a command sequence is configured in an override file, the default commands won't be loaded from the system configuration. The default commands should be copied into the override file when changing them.

uart string

The serial port to use for sending AT commands to the modem.

configure List of commands

AT commands to send to the modem when it is first started.

suspend List of commands

AT commands to send to the modem before the system suspends.

resume List of commands

AT commands to send to the modem after the system resumes from suspend.

reset List of commands

AT commands to send to the modem if resetting the usb port fails.

SECTION: gnss

Settings for uploading AGPS assistance data to the modem.

enabled boolean

Enable or disable uploading AGPS data to the modem

url string

The directory on the server that contains the assistance files

Example: https://xtrapath4.izatcloud.net

file string

The name of the assistance file on the server.

Example: xtra2.bin

SECTION: gpio

The gpio section defines the GPIO pins to use for different modem functions. These settings should only be changed when porting eg25-manager to a new device; for this reason they aren't documented here.

EXAMPLES

Print the firmware version every time the phone wakes from suspend:

[at]
resume = [


    { cmd = "QGMR" },
]

Disable uploading AGPS data to the modem:

[gnss]
enabled = false

SEE AlSO

eg25-manager(8)

2024-03-10