Scroll to navigation

PMREP(1) General Commands Manual PMREP(1)


pmrep - performance metrics reporter


pmrep [-12357CdgGHIjkLmnprRuUvVxz?] [-4 action] [-6 sort-metric] [-8|-9 limit] [-a archive] [-A align] [--archive-folio folio] [-b|-B space-scale] [-c config] [--container container] [--daemonize] [-e derived] [-E lines] [-f format] [-F outfile] [-h host] [-i instances] [--include-texts] [-J rank] [-K spec] [-l delimiter] [-N predicate] [-o output] [-O origin] [-P|-0 precision] [-q|-Q count-scale] [-s samples] [-S starttime] [-t interval] [-T endtime] [-w|-W width] [-X label] [-y|-Y time-scale] [-Z timezone] metricspec [...]


pmrepis a customizable performance metrics reporting tool.Any available performance metric, live or archived, system and/or application, can be selected for reporting using one of the output alternatives listed below together with applicable formatting options.

pmrepcollects the selected metric values through the facilities of the Performance Co-Pilot (PCP), see PCPIntro(1).The metrics to be reported are specified on the command line, in a configuration file, or both. Metrics can be automatically converted and scaled using the PCP facilities, either by default or by per-metric scaling specifications. In addition to the existing metrics, derived metrics can be defined using the arithmetic expressions described in pmRegisterDerived(3).

Unless directed to another host by the-hoption,pmrepwill contact the Performance Metrics Collector Daemon (PMCD, see pmcd(1))on the local host.

The-aoption causespmrepto use the specified set of archive logs rather than connecting to a PMCD. The -aand-hoptions are mutually exclusive.

The-Loption causespmrepto use a local context to collect metrics from DSO PMDAs (Performance Metrics Domain Agents, ``plugins'') on the local host without PMCD. Only some metrics are available in this mode. The -a,-h,and-Loptions are mutually exclusive.

The metrics of interest are named in themetricspecargument(s). If a metricspec specifies a non-leaf node in the Performance Metrics Name Space (PMNS), then pmrepwill recursively descend the PMNS and report on all leaf nodes (i.e., metrics) for that metricspec. (Use for example pminfo(1)to list all the leaf nodes and their descriptions.)

Ametricspechas three different forms.First, on the command line it can start with a colon (``:'') to indicate a metricsetto be read from a pmrepconfiguration file (seepmrep.conf(5))which can then consist of any number of metricspecs. Second, a metricspecstarting with non-colon specifies a PMNS node as described above, optionally followed by metric formatting definitions. This so-called compact formof a metricspec is defined as follows:


A valid PMNS node(metric)is mandatory.It can be followed by a text labelused by supporting output targets (currently:stdout,see below).The optionalinstancesdefinition restricts csvandstdoutreporting to the specified instances (so non-matching instances will be filtered). An optional unit/scaleis applicable for dimension-compatible, non-string metrics. (See below for supported unit/scalespecifications.)By default, cumulative counter metrics are converted to rates, an optional typecan be set toraw to disable this rate conversion. For supporting output targets (currently: stdout)a numericwidthcan be used to set the width of the output column for this metric. Too-wide numeric values for output will not be printed (apart from trailing decimals, numeric values will never be silently truncated). Too-wide strings will be truncated. Then, a metric-specific precisioncan be provided for numeric non-integer output values. Lastly, a metric-specific limitcan be set for filtering numeric values per limit.

As a special case with metrics that are counters with time units(nanoseconds to hours), the unit/scalecan be used to change the default reporting (for example, milliseconds / second) to normalize to the range zero to one by setting this to sec(see also-yand-Y).

The followingmetricspecrequests the metrickernel.all.sysfork to be reported under the text label forks,converting to the default rate count/s in an8wide column. Although the definitions in this compact formare optional, they must always be provided in the order specified above.


The third form of a metricspec,verbose form,is described and valid only in pmrep.conf(5).

Derived metrics are specified like PMNS leaf node metrics.

Options via environment values (seepmGetOptions(3))override the corresponding built-in default values (if any). Configuration file options override the corresponding environment variables (if any). Command line options override the corresponding configuration file options (if any).


The available command line options are:
-0 precision, --precision-force=precision
Like-Pbut this option will override per-metric specifications.
-1, --dynamic-header
Print a new dynamically adjusted header every time changes inavailability of metric and instance values occur. By default a static header that never changes is printed once. See also -4,-7,and-E.
-2, --overall-rank
Perform overall ranking of instances in archive.By default ranking (see-J)and reporting happens on each interval.With this option all instances and values are ranked before a summary is reported. See pmlogsummary(1)for further archive summary reporting alternatives,including averages and peak times for values.
-3, --overall-rank-alt
Like-2but print metric instances in pmrep metricspec format, to allow easily selecting the instances for further investigation.
-4 action, --names-change=action
Specify whichactionto take on receiving a metric names change event during sampling. These events occur when a PMDA discovers new metrics sometime after starting up, and informs running client tools like pmrep.Valid values foractionare update (refresh metrics being sampled), ignore (do nothing - the default behaviour) and abort (exit the program if such an event happens). update implies --dynamic-header.
-5, --ignore-unknown
Silently ignore any metric name that cannot be resolved.At least one metric must be found for the tool to start.
-6, --sort-metric=sort-metric
Specify a sort reference metric to sort output by values with-X.By default sorting order is descending, prepending the metric name with the minus sign (``-'') will change the order to be ascending. See also -J and -N.
-7, --fixed-header
With -X print a fixed header once (unless using -E) including all metrics being reported. Unlike with the default (static) header, only instances with values available are reported. Unlike with the dynamic header, the header is not updated even if values for some metrics later become (un)available. See also -1 and -E.
-8 limit, --limit-filter=limit
Limit results to instances with values above/belowlimit.A positive integer will include instances with values at or above the limit in reporting. A negative integer will include instances with values at or below the limit in reporting. A value of zero performs no limit filtering. This option will not override possible per-metric specifications. See also -J and -N.
-9 limit, --limit-filter-force=limit
Like-8but this option will override per-metric specifications.
-a archive, --archive=archive
Performance metric values are retrieved from the set of PerformanceCo-Pilot (PCP) archive log files identified by the archive argument, which is a comma-separated list of names, each of which may be the base name of an archive or the name of a directory containing one or more archives. See also -u.
-A align, --align=align
Force the initial sample to bealigned on the boundary of a natural time unit align.Refer toPCPIntro(1)for a complete description of the syntax for align.
Read metric source archives from the PCP archivefoliocreated by tools like pmchart(1)or, less often, manually withmkaf(1).
-b scale, --space-scale=scale
Unit/scalefor space (byte) metrics, possible values includebytes,Kbytes,KB,Mbytes,MB,and so forth. This option will not override possible per-metric specifications. See also pmParseUnitsStr(3).
-B scale, --space-scale-force=scale
Like-bbut this option will override per-metric specifications.
-c config, --config=config
Specify theconfigfile to use.The default is the first found of:./pmrep.conf,$HOME/.pmrep.conf,$HOME/pcp/pmrep.conf,and$PCP_SYSCONF_DIR/pmrep/pmrep.conf.Seepmrep.conf(5).
Fetch performance metrics from the specifiedcontainer,either local or remote (see -h).
-C, --check
Exit before reporting any values, but after parsing the configurationand metrics and printing possible headers.
-d, --delay
When replaying from an archive, this option requests that the prevailingreal-time delay be applied between samples (see -t)to effect a pause, rather than the default behaviour of replaying at full speed.
Daemonize on startup.
-e derived, --derived=derived
Specifyderivedperformance metrics.Ifderivedstarts with a slash (``/'') or with a dot (``.'') it will be interpreted as a derived metrics configuration file, otherwise it will be interpreted as comma- or semicolon-separated derived metric expressions. For details see pmLoadDerivedConfig(3)andpmRegisterDerived(3).
-E lines, --repeat-header=lines
Repeat the header everylinesof output.See also-1and-7.
-f format, --timestamp-format=format
Use theformatstring for formatting the timestamp.The format will be used with Python's datetime.strftimemethod which is mostly the same as that described in strftime(3).An emptyformatstring (i.e., "") will remove the timestamps from the output. Defaults to %H:%M:%S when using the stdoutoutput target.Defaults to%Y-%m-%d %H:%M:%S when using the csvoutput target.
-F outfile, --output-file=outfile
Specify the output fileoutfile.See-o.
-g, --separate-header
Output the column number and complete metric information,one-per-line, before printing the metric values.
-G, --no-globals
Do not include global metrics in reporting (seepmrep.conf(5)).
-h host, --host=host
Fetch performance metrics frompmcd(1)onhost,rather than from the default localhost.
-H, --no-header
Do not print any headers.
-i instances, --instances=instances
Report only the listedinstancesfrom current instances (if present, see also -j).By default all current instances are reported,except when writing an archive (see -o)when all instances, present and future, are reported. This is a global option that is used for all metrics unless a metric-specific instance definition is provided as part of a metricspec.By default single-valued ``flat'' metrics without multiple instances are still reported as usual, use -vto change this.

The list may consist of one or more comma-separated instances.The instance name may be quoted with single (') or double (") quotes for those cases where the instance name contains commas or whitespace. Note that on the command line when specifying more than one instance, all the names must be quoted.

Multiple-ioptions are allowed as an alternative way of specifying more than one instance of interest. Regular expressions can also be used.

As an example, the following would report the same instances:

$ pmrep -i "'1 minute','5 minute'" kernel.all.load
$ pmrep -i '"1 minute","5 minute"' kernel.all.load
$ pmrep -i "'1 minute'" -i "'5 minute'" kernel.all.load
$ pmrep kernel.all.load,,"'1 minute','5 minute'"
$ pmrep kernel.all.load,,'"1 minute","5 minute"'

However, this would report only the 1-minute instance:

$ pmrep -i '"1 minute","5 minute"' kernel.all.load,,"1 minute"

But this would report all instances (due to per-metric override):

$ pmrep -i '"1 minute","5 minute"' 'kernel.all.load,,.*'

-I, --ignore-incompat
Ignore incompatible metrics.By default incompatible metrics (that is,their type is unsupported or they cannot be scaled as requested) will cause pmrep to terminate with an error message. With this option all incompatible metrics are silently omitted from reporting. This may be especially useful when requesting non-leaf nodes of the PMNS tree for reporting.
When writing a PCP archive,include PCP metric help texts in the created archive.
-j, --live-filter
Perform instance live filtering.This allows capturing all filtered instances even if processes are restarted at some point (unlike without live filtering). Performing live filtering over a huge amount of instances will add some internal overhead so a bit of user caution is advised. See also -1 and -n.
-J rank, --rank=rank
Limit results to highest/lowestrankedinstances of set-valued metrics. A positive integer will include highest valued instances in reporting. A negative integer will include lowest valued instances in reporting. A value of zero performs no ranking. Ranking does not imply sorting, see -6.See also-2and-8.
-k, --extended-csv
Write extended CSV output, similar tosadf(1).
-K spec, --spec-local=spec
When fetching metrics from a local context (see-L),the-Koption may be used to control the DSO PMDAs that should be made accessible. The specargument conforms to the syntax described in pmSpecLocalPMDA(3).More than one-Koption may be used.
-l delimiter, --delimiter=delimiter
Specify thedelimiterthat separates each column ofcsvorstdout output. The default for stdoutis two spaces (`` '') and comma (``,'') for csv.In case of CSV output or stdout output with non-whitespace delimiter, any instances of the delimiter in string values will be replaced by the underscore (``_'') character.
-L, --local-PMDA
Use a local context to collect metrics from DSO PMDAs on the local hostwithout PMCD. See also -K.
include labels in the report.
-n, --invert-filter
Perform ranking before live filtering.By default instance live filtering (when requested, see -j)happens before instance ranking (when requested, see -J).With this option the logic is inverted and ranking happens before live filtering.
-N predicate, --predicate=predicate
Specify a comma-separated list ofpredicatefilter reference metrics.By default ranking (see -J)happens for each metric individually. With predicates, ranking is done only for the specified predicate metrics. When reporting, rest of the metrics sharing the same instance domain(seePCPIntro(1))as the predicate will include only the highest/lowest ranking instances of the corresponding predicate. Ranking does not imply sorting, see -6.

So for example, using proc.memory.rss (resident memory size of process) as the predicatemetric together with and mem.util.used as metrics to be reported, only the processes using most/least (as per -J)memory will be included when reporting total bytes written by processes. Since mem.util.used is a single-valued metric (thus not sharing the same instance domain as the process-related metrics), it will be reported as usual.

-o output, --output=output
Useoutputtarget for reporting.The default target isstdout.The available target alternatives are:
Record metrics into a PCP archive which can later be replayed with PCPtools, including pmrepitself.SeeLOGARCHIVE(5)andPCPIntro(1)for details about PCP archive files. Requires -F.
Print metrics in CSV format (subject to formatting options).
Print metrics to stdout (format subject to formatting options).
-O origin, --origin=origin
When reporting archived metrics, start reporting atoriginwithin the time window (see -Sand-T).Refer toPCPIntro(1)for a complete description of the syntax for origin.
-p, --timestamps
Print timestamps.By default no timestamps are printed.
-P precision, --precision=precision
Useprecisionfor numeric non-integer output values.If the value is too wide for its column width, precisionis reduced one by one until the value fits, or not printed at all if it does not. The default is to use 3 decimal places (when applicable). This option will not override possible per-metric specifications.
-q scale, --count-scale=scale
Unit/scalefor count metrics, possible values includecount x 10^-1,count,count x 10,count x 10^2,and so forth from 10^-8to10^7.(These values are currently space-sensitive.) This option will not override possible per-metric specifications. See also pmParseUnitsStr(3).
-Q scale, --count-scale-force=scale
Like-qbut this option will override per-metric specifications.
-r, --raw
Output raw metric values, do not convert cumulative counters to rates.When writing archives, raw values are always used. This option will override possible per-metric specifications.
-R, --raw-prefer
Like-rbut this option will not override per-metric specifications.
-s samples, --samples=samples
Thesamplesargument defines the number of samples to be retrieved and reported. If samplesis 0 or-sis not specified,pmrep will sample and report continuously (in real time mode) or until the end of the set of PCP archives (in archive mode). See also -T.
-S starttime, --start=starttime
When reporting archived metrics, the report will be restricted to thoserecords logged at or after starttime.Refer toPCPIntro(1) for a complete description of the syntax for starttime.
-t interval, --interval=interval
Set the reportingintervalto something other than the default 1 second. The intervalargument follows the syntax described inPCPIntro(1),and in the simplest form may be an unsigned integer(the implied units in this case are seconds). See also the -T and -uoptions.
-T endtime, --finish=endtime
When reporting archived metrics, the report will be restricted to thoserecords logged before or at endtime.Refer toPCPIntro(1)for a complete description of the syntax for endtime.

When used to define the runtime before pmrep will exit, if no samples is given (see -s) then the number of reported samples depends on interval (see -t). If samplesis given then intervalwill be adjusted to allow reporting ofsamples during runtime. In case all of -T,-s,and-t are given, endtimedetermines the actual time pmrepwill run.

-u, --no-interpol
When reporting archived metrics, by default values are reportedaccording to the selected sample interval (-toption), not according to the actual record interval in an archive. To this effect PCP interpolates the values to be reported based on the records in the archive. With the -u option uninterpolated reporting is enabled, every recorded value for the selected metrics is reported and the requested sample interval (-t)is ignored.

So for example, if a PCP archive contains recorded values for every 10 seconds and the requested sample interval is 1 hour, by default pmrep will use an interpolation scheme to compute the values of the requested metrics from the values recorded in the proximity of these requested metrics and values for every 1 hour are reported. With -uevery record every 10 seconds are reported as such (the reported values are still subject to rate conversion, use -ror-Rto disable).

-U, --no-unit-info
Omit unit information from headers.
-v, --omit-flat
Omit single-valued ``flat'' metrics from reporting, only considerset-valued metrics (i.e., metrics with multiple values) for reporting. See -iand-I.
-V, --version
Display version number and exit.
-w width, --width=width
Set thestdoutoutput columnwidth.Strings will be truncated to this width. The default widthis the shortest that can fit the metric text label, the forced minimum is 3. This option will not override possible per-metric specifications.
-W width, --width-force=width
Like-wbut this option will override per-metric specifications.
-x, --extended-header
Print extended header.
-X label, --colxrow=label
Swap columns and rows in stdout output, reporting one instance per line, using label as the text label for instance column (set to an empty string "" to enable swapping without a specific text label). This is convenient to allow easily using grep(1)to filter results or to more closely mimic other utilities. See also -i and -6.
-y scale, --time-scale=scale
Unit/scalefor time metrics, possible values includenanosec,ns,microsec,us,millisec,ms,and so forth up to hour,hr.This option will not override possible per-metric specifications. See also pmParseUnitsStr(3).
-Y scale, --time-scale-force=scale
Like-ybut this option will override per-metric specifications.
-z, --hostzone
Use the local timezone of the host that is the source of theperformance metrics, as identified by either the -hor the-aoptions.The default is to use the timezone of the local host.
-Z timezone, --timezone=timezone
Usetimezonefor the date and time.Timezoneis in the format of the environment variable TZas described inenviron(7).Note that when including a timezone string in output, ISO 8601 -style UTC offsets are used (so something like -Z EST+5 will become UTC-5).
-?, --help
Display usage message and exit.


The following examples use the standard PCP facilities for collecting the metric values, no external utilities are needed. The referenced colon-starting metricsets are part of the system pmrep.conf file.

Display network interface metrics on the local host:

$ pmrep

Display all outgoing network metrics for thewlan0interface:

$ pmrep -i wlan0 -v network.interface.out

Display timestampedvmstat(8)like information using megabytes instead of kilobytes and also include the number of inodes used (tab completes available metrics and after a colon metricsets with bash and zsh):

$ pmrep -p -B MB :vmstat vfs.inodes.count

Display per-device disk reads and writes from the hostserver1 using two seconds interval and sadf(1)like CSV output format:

$ pmrep -h server1 -t 2s -o csv -k

Display processes using at least 100MB of memory usingdynamic headers:

$ pmrep -b MB --limit-filter 100 --dynamic-header proc.memory.rss

Display the predefined set of metrics from the defaultpmrep.conf(5)containing information about I/O issued by current firefox process(es):

$ pmrep -i '.*firefox.*' :proc-io

Display the three most CPU-using processes:

$ pmrep -1gUJ 3 proc.hog.cpu

Displaysar -wandsar -Wlike information at the same time from the PCP archive ./20150921.09.13showing values recorded between 3 - 5 PM:

$ pmrep -a ./20150921.09.13 -S @15:00 -T @17:00 :sar-w :sar-W

Record most relevant CPU, memory, and I/O related information about every Java process on the system, present and future, to an archive ./aon one minute interval at every full minute in a background process:

$ pmrep --daemonize -A 1m -t 1m -i '.*java.*' -j -o archive -F ./a \
    :proc-info :proc-cpu :proc-mem :proc-io

Record all 389 Directory Server, XFS file system, and CPU/memory/disk metrics every five seconds for five minutes to a PCP archive ./a:

$ pmrep -t 5s -T 5m -o archive -F ./a ds389 xfs kernel.all.cpu mem disk

Record process memory and I/O information for those processeswhich are the three most memory-consuming processes:

$ pmrep -o archive -F ./a -J 3 -N proc.memory.rss proc.memory


pmrep configuration file (see -c)
system provided pmrep configuration file


Environment variables with the prefix PCP_ are used to parameterize the file and directory names used by PCP. On each installation, the file /etc/pcp.conf contains the local values for these variables. The $PCP_CONF variable may be used to specify an alternative configuration file, as described in pcp.conf(5).

For environment variables affecting PCP tools, see pmGetOptions(3).


PCP Performance Co-Pilot