perf-probe - Define new dynamic tracepoints
perf probe [options] --add=PROBE [...] or perf probe [options] PROBE or perf probe [options] --del=[GROUP:]EVENT [...] or perf probe --list[=[GROUP:]EVENT] or perf probe [options] --line=LINE or perf probe [options] --vars=PROBEPOINT or perf probe [options] --funcs or perf probe [options] --definition=PROBE [...]
This command defines dynamic tracepoint events, by symbol and registers without debuginfo, or by C expressions (C line numbers, C function names, and C local variables) with debuginfo.
Be more verbose (show parsed arguments, etc). Can not use with -q.
--target-ns=PID: Obtain mount namespace information from the target pid. This is used when creating a uprobe for a process that resides in a different mount namespace from the perf(1) utility.
In absence of -m/-x options, perf probe checks if the first argument after the options is an absolute path name. If its an absolute path, perf probe uses it as a target module/target user space binary to probe.
Probe points are defined by following syntax.
1) Define event based on function name
[[GROUP:]EVENT=]FUNC[@SRC][:RLN|+OFFS|%return|;PTN] [ARG ...]
2) Define event based on source file with line number
[[GROUP:]EVENT=]SRC:ALN [ARG ...]
3) Define event based on source file with lazy pattern
[[GROUP:]EVENT=]SRC;PTN [ARG ...]
4) Pre-defined SDT events or cached event with name
EVENT specifies the name of new event, if omitted, it will be set the name of the probed function, and for return probes, a "_\_return" suffix is automatically added to the function name. You can also specify a group name by GROUP, if omitted, set probe is used for kprobe and probe_<bin> is used for uprobe. Note that using existing group name can conflict with other events. Especially, using the group name reserved for kernel modules can hide embedded events in the modules. FUNC specifies a probed function name, and it may have one of the following options; +OFFS is the offset from function entry address in bytes, :RLN is the relative-line number from function entry line, and %return means that it probes function return. And ;PTN means lazy matching pattern (see LAZY MATCHING). Note that ;PTN must be the end of the probe point definition. In addition, @SRC specifies a source file which has that function. It is also possible to specify a probe point by the source line number or lazy matching by using SRC:ALN or SRC;PTN syntax, where SRC is the source file path, :ALN is the line number and ;PTN is the lazy matching pattern. ARG specifies the arguments of this probe point, (see PROBE ARGUMENT). SDTEVENT and PROVIDER is the pre-defined event name which is defined by user SDT (Statically Defined Tracing) or the pre-cached probes with event name. Note that before using the SDT event, the target binary (on which SDT events are defined) must be scanned by perf-buildid-cache(1) to make SDT events as cached events.
For details of the SDT, see below. <https://sourceware.org/gdb/onlinedocs/gdb/Static-Probe-Points.html>
In the probe syntax, =, @, +, : and ; are treated as a special character. You can use a backslash (\) to escape the special characters. This is useful if you need to probe on a specific versioned symbols, like @GLIBC_... suffixes, or also you need to specify a source file which includes the special characters. Note that usually single backslash is consumed by shell, so you might need to pass double backslash (\\) or wrapping with single quotes ('AAA\@BBB'). See EXAMPLES how it is used.
Each probe argument follows below syntax.
NAME specifies the name of this argument (optional). You can use the name of local variable, local data structure member (e.g. var→field, var.field2), local array with fixed index (e.g. array, var→array, var→pointer), or kprobe-tracer argument format (e.g. $retval, %ax, etc). Note that the name of this argument will be set as the last member name if you specify a local data structure member (e.g. field2 for var→field1.field2.) $vars and $params special arguments are also available for NAME, $vars is expanded to the local variables (including function parameters) which can access at given probe point. $params is expanded to only the function parameters. TYPE casts the type of this argument (optional). If omitted, perf probe automatically set the type based on debuginfo (*). Currently, basic types (u8/u16/u32/u64/s8/s16/s32/s64), hexadecimal integers (x/x8/x16/x32/x64), signedness casting (u/s), "string" and bitfield are supported. (see TYPES for detail) On x86 systems %REG is always the short form of the register: for example %AX. %RAX or %EAX is not valid. "@user" is a special attribute which means the LOCALVAR will be treated as a user-space memory. This is only valid for kprobe event.
Basic types (u8/u16/u32/u64/s8/s16/s32/s64) and hexadecimal integers (x8/x16/x32/x64) are integer types. Prefix s and u means those types are signed and unsigned respectively, and x means that is shown in hexadecimal format. Traced arguments are shown in decimal (sNN/uNN) or hex (xNN). You can also use s or u to specify only signedness and leave its size auto-detected by perf probe. Moreover, you can use x to explicitly specify to be shown in hexadecimal (the size is also auto-detected). String type is a special type, which fetches a "null-terminated" string from kernel space. This means it will fail and store NULL if the string container has been paged out. You can specify string type only for the local variable or structure member which is an array of or a pointer to char or unsigned char type. Bitfield is another special type, which takes 3 parameters, bit-width, bit-offset, and container-size (usually 32). The syntax is;
Line range is described by following syntax.
FUNC specifies the function name of showing lines. RLN is the start line number from function entry line, and RLN2 is the end line number. As same as probe syntax, SRC means the source file path, ALN is start line number, and ALN2 is end line number in the file. It is also possible to specify how many lines to show by using NUM. Moreover, FUNC@SRC combination is good for searching a specific function when several functions share same name. So, "source.c:100-120" shows lines between 100th to l20th in source.c file. And "func:10+20" shows 20 lines from 10th line of func function.
The lazy line matching is similar to glob matching but ignoring spaces in both of pattern and target. So this accepts wildcards(*, ?) and character classes(e.g. [a-z], [!A-Z]).
e.g. a=* can matches a=b, a = b, a == b and so on.
This provides some sort of flexibility and robustness to probe point definitions against minor code changes. For example, actual 10th line of schedule() can be moved easily by modifying schedule(), but the same line matching rq=cpu_rq* may still exist in the function.)
The filter pattern is a glob matching pattern(s) to filter variables. In addition, you can use "!" for specifying filter-out rule. You also can give several rules combined with "&" or "|", and fold those rules as one rule by using "(" ")".
e.g. With --filter "foo* | bar*", perf probe -V shows variables which start with "foo" or "bar". With --filter "!foo* & *bar", perf probe -V shows variables which don’t start with "foo" and end with "bar", like "fizzbar". But "foobar" is filtered out.
Display which lines in schedule() can be probed:
./perf probe --line schedule
Add a probe on schedule() function 12th line with recording cpu local variable:
./perf probe schedule:12 cpu or ./perf probe --add='schedule:12 cpu'
Add one or more probes which has the name start with "schedule".
./perf probe schedule* or ./perf probe --add='schedule*'
Add probes on lines in schedule() function which calls update_rq_clock().
./perf probe 'schedule;update_rq_clock*' or ./perf probe --add='schedule;update_rq_clock*'
Delete all probes on schedule().
./perf probe --del='schedule*'
Add probes at zfree() function on /bin/zsh
./perf probe -x /bin/zsh zfree or ./perf probe /bin/zsh zfree
Add probes at malloc() function on libc
./perf probe -x /lib/libc.so.6 malloc or ./perf probe /lib/libc.so.6 malloc
Add a uprobe to a target process running in a different mount namespace
./perf probe --target-ns <target pid> -x /lib64/libc.so.6 malloc
Add a USDT probe to a target process running in a different mount namespace
./perf probe --target-ns <target pid> -x /usr/lib/jvm/java-1.8.0-openjdk-188.8.131.52-0.b13.el7_3.x86_64/jre/lib/amd64/server/libjvm.so %sdt_hotspot:thread__sleep__end
Add a probe on specific versioned symbol by backslash escape
./perf probe -x /lib64/libc-2.25.so 'malloc_get_state\@GLIBC_2.2.5'
Add a probe in a source file using special characters by backslash escape
./perf probe -x /opt/test/a.out 'foo\+bar.c:4'
PERMISSIONS AND SYSCTL¶
Since perf probe depends on ftrace (tracefs) and kallsyms (/proc/kallsyms), you have to care about the permission and some sysctl knobs.