Scroll to navigation

Config::Tiny(3pm) User Contributed Perl Documentation Config::Tiny(3pm)


Config::Tiny - Read/Write .ini style files with as little code as possible


        # In your configuration file
        three= four
        Foo =Bar
        # In your program
        use Config::Tiny;
        # Create an empty config
        my $Config = Config::Tiny->new;
        # Create a config with data
        my $config = Config::Tiny->new({
                _ => { rootproperty => "Bar" },
                section => { one => "value", Foo => 42 } });
        # Open the config
        $Config = Config::Tiny->read( 'file.conf' );
        $Config = Config::Tiny->read( 'file.conf', 'utf8' ); # Neither ':' nor '<:' prefix!
        $Config = Config::Tiny->read( 'file.conf', 'encoding(iso-8859-1)');
        # Reading properties
        my $rootproperty = $Config->{_}->{rootproperty};
        my $one = $Config->{section}->{one};
        my $Foo = $Config->{section}->{Foo};
        # Changing data
        $Config->{newsection} = { this => 'that' }; # Add a section
        $Config->{section}->{Foo} = 'Not Bar!';     # Change a value
        delete $Config->{_};                        # Delete a value or section
        # Save a config
        $Config->write( 'file.conf' );
        $Config->write( 'file.conf', 'utf8' ); # Neither ':' nor '>:' prefix!
        # Shortcuts
        my($rootproperty) = $$Config{_}{rootproperty};
        my($config) = Config::Tiny -> read_string('alpha=bet');
        my($value)  = $$config{_}{alpha}; # $value is 'bet'.
        my($config) = Config::Tiny -> read_string("[init]\nalpha=bet");
        my($value)  = $$config{init}{alpha}; # $value is 'bet'.


"Config::Tiny" is a Perl class to read and write .ini style configuration files with as little code as possible, reducing load time and memory overhead.

Most of the time it is accepted that Perl applications use a lot of memory and modules.

The *::Tiny family of modules is specifically intended to provide an ultralight alternative to the standard modules.

This module is primarily for reading human written files, and anything we write shouldn't need to have documentation/comments. If you need something with more power move up to Config::Simple, Config::General or one of the many other "Config::*" modules.

Lastly, Config::Tiny does not preserve your comments, whitespace, or the order of your config file.

See Config::Tiny::Ordered (and possibly others) for the preservation of the order of the entries in the file.


Files are the same format as for MS Windows "*.ini" files. For example:


If a property is outside of a section at the beginning of a file, it will be assigned to the "root section", available at "$Config->{_}".

Lines starting with '#' or ';' are considered comments and ignored, as are blank lines.

When writing back to the config file, all comments, custom whitespace, and the ordering of your config file elements are discarded. If you need to keep the human elements of a config when writing back, upgrade to something better, this module is not for you.



Returns a string representing the most recent error, or the empty string.

You can also retrieve the error message from the $Config::Tiny::errstr variable.


Here, the [] indicate an optional parameter.

The constructor "new" creates and returns a "Config::Tiny" object.

This will normally be a new, empty configuration, but you may also pass a hashref here which will be turned into an object of this class. This hashref should have a structure suitable for a configuration file, that is, a hash of hashes where the key "_" is treated specially as the root section.

read($filename, [$encoding])

Here, the [] indicate an optional parameter.

The "read" constructor reads a config file, $filename, and returns a new "Config::Tiny" object containing the properties in the file.

$encoding may be used to indicate the encoding of the file, e.g. 'utf8' or 'encoding(iso-8859-1)'.

Do not add a prefix to $encoding, such as '<' or '<:'.

Returns the object on success, or "undef" on error.

When "read" fails, "Config::Tiny" sets an error message internally you can recover via "Config::Tiny->errstr". Although in some cases a failed "read" will also set the operating system error variable $!, not all errors do and you should not rely on using the $! variable.

See t/04.utf8.t and t/04.utf8.txt.


The "read_string" method takes as argument the contents of a config file as a string and returns the "Config::Tiny" object for it.

write($filename, [$encoding])

Here, the [] indicate an optional parameter.

The "write" method generates the file content for the properties, and writes it to disk to the filename specified.

$encoding may be used to indicate the encoding of the file, e.g. 'utf8' or 'encoding(iso-8859-1)'.

Do not add a prefix to $encoding, such as '>' or '>:'.

Returns true on success or "undef" on error.

See t/04.utf8.t and t/04.utf8.txt.


Generates the file content for the object and returns it as a string.


What happens if a key is repeated?

The last value is retained, overwriting any previous values.

See t/06.repeat.key.t.

Why can't I put comments at the ends of lines?

So a line like:

        key=value # A comment

Sets key to 'value # A comment', which, presumably, you did not intend.

This conforms to the syntax discussed in "CONFIGURATION FILE SYNTAX".

This means you can't preserve the suffix using:

        key = Prefix ; Suffix

Result: key is now 'Prefix'.

But you can do this:

        key = Prefix;Suffix

Result: key is now 'Prefix;Suffix'.

Or this:

        key = Prefix; Suffix

Result: key is now 'Prefix; Suffix'.

See t/07.trailing.comment.t.

Why can't I omit the '=' signs?


        my =
        list =
        of =
        things =

Instead of:


Because the use of '=' signs is a type of mandatory documentation. It indicates that that section contains 4 items, and not 1 odd item split over 4 lines.

Why do I have to assign the result of a method call to a variable?

This question comes from RT#85386.

Yes, the syntax may seem odd, but you don't have to call both new() and read_string().


        perl -MData::Dumper -MConfig::Tiny -E 'my $c=Config::Tiny->read_string("one=s"); say Dumper $c'


        my($config) = Config::Tiny -> read_string('alpha=bet');
        my($value)  = $$config{_}{alpha}; # $value is 'bet'.

Or even, a bit ridiculously:

        my($value) = ${Config::Tiny -> read_string('alpha=bet')}{_}{alpha}; # $value is 'bet'.

Can I use a file called '0' (zero)?

Yes. See t/ (test code) and t/0 (test data).


Some edge cases in section headers are not supported, and additionally may not be detected when writing the config file.

Specifically, section headers with leading whitespace, trailing whitespace, or newlines anywhere in the section header, will not be written correctly to the file and may cause file corruption.




Bugs should be reported via the CPAN bug tracker at


For other issues, or commercial enhancement or support, contact the author.


Adam Kennedy <>

Maintanence from V 2.15: Ron Savage <>.


Thanks to Sherzod Ruzmetov <> for Config::Simple, which inspired this module by being not quite "simple" enough for me :).


See, amongst many: Config::Simple and Config::General.

See Config::Tiny::Ordered (and possibly others) for the preservation of the order of the entries in the file.

IOD. Ini On Drugs.




Config::Perl::V. Config data from Perl itself.




Config::Hash. Allows nested data.

Config::MVP. Author: RJBS. Uses Moose. Extremely complex.

Config::TOML. See next few lines:


<>. 1 Star rating.



Copyright 2002 - 2011 Adam Kennedy.

This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.

The full text of the license can be found in the LICENSE file included with this module.

2022-01-07 perl v5.32.1