The Git configuration file contains a number of variables that
affect the Git commands' behavior. The files .git/config and
optionally config.worktree (see the "CONFIGURATION FILE"
section of git-worktree(1)) in each repository are used to store the
configuration for that repository, and $HOME/.gitconfig is used to
store a per-user configuration as fallback values for the .git/config
file. The file /etc/gitconfig can be used to store a system-wide
default configuration.
The configuration variables are used by both the Git plumbing and
the porcelains. The variables are divided into sections, wherein the fully
qualified variable name of the variable itself is the last dot-separated
segment and the section name is everything before the last dot. The variable
names are case-insensitive, allow only alphanumeric characters and -,
and must start with an alphabetic character. Some variables may appear
multiple times; we say then that the variable is multivalued.
Variables¶
Note that this list is non-comprehensive and not necessarily
complete. For command-specific variables, you will find a more detailed
description in the appropriate manual page.
Other git-related tools may and do use their own variables. When
inventing new variables for use in your own tool, make sure their names do
not conflict with those that are used by Git itself and other popular tools,
and describe them in your documentation.
advice.*
These variables control various optional help messages
designed to aid new users. All
advice.* variables default to
true, and you can tell Git that you do not need help by setting these
to
false:
fetchShowForcedUpdates
Advice shown when
git-fetch(1) takes a long time
to calculate forced updates after ref updates, or to warn that the check is
disabled.
pushUpdateRejected
Set this variable to false if you want to disable
pushNonFFCurrent, pushNonFFMatching, pushAlreadyExists,
pushFetchFirst, pushNeedsForce, and pushRefNeedsUpdate
simultaneously.
pushNonFFCurrent
Advice shown when
git-push(1) fails due to a
non-fast-forward update to the current branch.
pushNonFFMatching
Advice shown when you ran
git-push(1) and pushed
matching refs explicitly (i.e. you used
:, or specified a
refspec that isn’t your current branch) and it resulted in a
non-fast-forward error.
pushAlreadyExists
Shown when
git-push(1) rejects an update that does
not qualify for fast-forwarding (e.g., a tag.)
pushFetchFirst
Shown when
git-push(1) rejects an update that
tries to overwrite a remote ref that points at an object we do not have.
pushNeedsForce
Shown when
git-push(1) rejects an update that
tries to overwrite a remote ref that points at an object that is not a
commit-ish, or make the remote ref point at an object that is not a
commit-ish.
pushUnqualifiedRefname
Shown when
git-push(1) gives up trying to guess
based on the source and destination refs what remote ref namespace the source
belongs in, but where we can still suggest that the user push to either
refs/heads/* or refs/tags/* based on the type of the source object.
pushRefNeedsUpdate
Shown when
git-push(1) rejects a forced update of
a branch when its remote-tracking ref has updates that we do not have
locally.
skippedCherryPicks
Shown when
git-rebase(1) skips a commit that has
already been cherry-picked onto the upstream branch.
statusAheadBehind
Shown when
git-status(1) computes the ahead/behind
counts for a local ref compared to its remote tracking ref, and that
calculation takes longer than expected. Will not appear if
status.aheadBehind is false or the option
--no-ahead-behind is
given.
statusHints
statusUoption
Advise to consider using the
-u option to
git-status(1) when the command takes more than 2 seconds to enumerate
untracked files.
commitBeforeMerge
Advice shown when
git-merge(1) refuses to merge to
avoid overwriting local changes.
resetQuiet
Advice to consider using the
--quiet option to
git-reset(1) when the command takes more than 2 seconds to enumerate
unstaged changes after reset.
resolveConflict
Advice shown by various commands when conflicts prevent
the operation from being performed.
sequencerInUse
Advice shown when a sequencer command is already in
progress.
implicitIdentity
Advice on how to set your identity configuration when
your information is guessed from the system username and domain name.
detachedHead
Advice shown when you used
git-switch(1) or
git-checkout(1) to move to the detach HEAD state, to instruct how to
create a local branch after the fact.
checkoutAmbiguousRemoteBranchName
Advice shown when the argument to
git-checkout(1)
and
git-switch(1) ambiguously resolves to a remote tracking branch on
more than one remote in situations where an unambiguous argument would have
otherwise caused a remote-tracking branch to be checked out. See the
checkout.defaultRemote configuration variable for how to set a given
remote to used by default in some situations where this advice would be
printed.
amWorkDir
Advice that shows the location of the patch file when
git-am(1) fails to apply it.
rmHints
In case of failure in the output of
git-rm(1),
show directions on how to proceed from the current state.
addEmbeddedRepo
Advice on what to do when you’ve accidentally
added one git repo inside of another.
ignoredHook
Advice shown if a hook is ignored because the hook is not
set as executable.
waitingForEditor
Print a message to the terminal whenever Git is waiting
for editor input from the user.
nestedTag
Advice shown if a user attempts to recursively tag a tag
object.
submoduleAlternateErrorStrategyDie
Advice shown when a submodule.alternateErrorStrategy
option configured to "die" causes a fatal error.
addIgnoredFile
Advice shown if a user attempts to add an ignored file to
the index.
addEmptyPathspec
Advice shown if a user runs the add command without
providing the pathspec parameter.
updateSparsePath
Advice shown when either
git-add(1) or
git-rm(1) is asked to update index entries outside the current sparse
checkout.
core.fileMode
Tells Git if the executable bit of files in the working
tree is to be honored.
Some filesystems lose the executable bit when a file that is
marked as executable is checked out, or checks out a non-executable file
with executable bit on. git-clone(1) or git-init(1) probe the
filesystem to see if it handles the executable bit correctly and this
variable is automatically set as necessary.
A repository, however, may be on a filesystem that handles the
filemode correctly, and this variable is set to true when created,
but later may be made accessible from another environment that loses the
filemode (e.g. exporting ext4 via CIFS mount, visiting a Cygwin created
repository with Git for Windows or Eclipse). In such a case it may be
necessary to set this variable to false. See
git-update-index(1).
The default is true (when core.filemode is not specified in the
config file).
core.hideDotFiles
(Windows-only) If true, mark newly-created directories
and files whose name starts with a dot as hidden. If dotGitOnly, only
the .git/ directory is hidden, but no other files starting with a dot.
The default mode is dotGitOnly.
core.ignoreCase
Internal variable which enables various workarounds to
enable Git to work better on filesystems that are not case sensitive, like
APFS, HFS+, FAT, NTFS, etc. For example, if a directory listing finds
"makefile" when Git expects "Makefile", Git will assume it
is really the same file, and continue to remember it as "Makefile".
The default is false, except git-clone(1) or
git-init(1) will probe and set core.ignoreCase true if appropriate
when the repository is created.
Git relies on the proper configuration of this variable for your
operating and file system. Modifying this value may result in unexpected
behavior.
core.precomposeUnicode
This option is only used by Mac OS implementation of Git.
When core.precomposeUnicode=true, Git reverts the unicode decomposition of
filenames done by Mac OS. This is useful when sharing a repository between Mac
OS and Linux or Windows. (Git for Windows 1.7.10 or higher is needed, or Git
under cygwin 1.7). When false, file names are handled fully transparent by
Git, which is backward compatible with older versions of Git.
core.protectHFS
If set to true, do not allow checkout of paths that would
be considered equivalent to .git on an HFS+ filesystem. Defaults to
true on Mac OS, and false elsewhere.
core.protectNTFS
If set to true, do not allow checkout of paths that would
cause problems with the NTFS filesystem, e.g. conflict with 8.3
"short" names. Defaults to true on Windows, and false
elsewhere.
core.fsmonitor
If set, the value of this variable is used as a command
which will identify all files that may have changed since the requested
date/time. This information is used to speed up git by avoiding unnecessary
processing of files that have not changed. See the
"fsmonitor-watchman" section of
githooks(5).
core.fsmonitorHookVersion
Sets the version of hook that is to be used when calling
fsmonitor. There are currently versions 1 and 2. When this is not set, version
2 will be tried first and if it fails then version 1 will be tried. Version 1
uses a timestamp as input to determine which files have changes since that
time but some monitors like watchman have race conditions when used with a
timestamp. Version 2 uses an opaque string so that the monitor can return
something that can be used to determine what files have changed without race
conditions.
core.trustctime
If false, the ctime differences between the index and the
working tree are ignored; useful when the inode change time is regularly
modified by something outside Git (file system crawlers and some backup
systems). See
git-update-index(1). True by default.
core.splitIndex
If true, the split-index feature of the index will be
used. See
git-update-index(1). False by default.
core.untrackedCache
Determines what to do about the untracked cache feature
of the index. It will be kept, if this variable is unset or set to
keep. It will automatically be added if set to
true. And it will
automatically be removed, if set to
false. Before setting it to
true, you should check that mtime is working properly on your system.
See
git-update-index(1).
keep by default, unless
feature.manyFiles is enabled which sets this setting to
true by
default.
core.checkStat
When missing or is set to
default, many fields in
the stat structure are checked to detect if a file has been modified since Git
looked at it. When this configuration variable is set to
minimal,
sub-second part of mtime and ctime, the uid and gid of the owner of the file,
the inode number (and the device number, if Git was compiled to use it), are
excluded from the check among these fields, leaving only the whole-second part
of mtime (and ctime, if
core.trustCtime is set) and the filesize to be
checked.
There are implementations of Git that do not leave usable values
in some fields (e.g. JGit); by excluding these fields from the comparison,
the minimal mode may help interoperability when the same repository
is used by these other systems at the same time.
core.quotePath
Commands that output paths (e.g. ls-files,
diff), will quote "unusual" characters in the pathname by
enclosing the pathname in double-quotes and escaping those characters with
backslashes in the same way C escapes control characters (e.g. \t for
TAB, \n for LF, \\ for backslash) or bytes with values larger
than 0x80 (e.g. octal \302\265 for "micro" in UTF-8). If this
variable is set to false, bytes higher than 0x80 are not considered
"unusual" any more. Double-quotes, backslash and control characters
are always escaped regardless of the setting of this variable. A simple space
character is not considered "unusual". Many commands can output
pathnames completely verbatim using the -z option. The default value is
true.
core.eol
Sets the line ending type to use in the working directory
for files that are marked as text (either by having the
text attribute
set, or by having
text=auto and Git auto-detecting the contents as
text). Alternatives are
lf,
crlf and
native, which uses
the platform’s native line ending. The default value is
native.
See
gitattributes(5) for more information on end-of-line conversion.
Note that this value is ignored if
core.autocrlf is set to
true
or
input.
core.safecrlf
If true, makes Git check if converting
CRLF is
reversible when end-of-line conversion is active. Git will verify if a command
modifies a file in the work tree either directly or indirectly. For example,
committing a file followed by checking out the same file should yield the
original file in the work tree. If this is not the case for the current
setting of
core.autocrlf, Git will reject the file. The variable can be
set to "warn", in which case Git will only warn about an
irreversible conversion but continue the operation.
CRLF conversion bears a slight chance of corrupting data. When it
is enabled, Git will convert CRLF to LF during commit and LF to CRLF during
checkout. A file that contains a mixture of LF and CRLF before the commit
cannot be recreated by Git. For text files this is the right thing to do: it
corrects line endings such that we have only LF line endings in the
repository. But for binary files that are accidentally classified as text
the conversion can corrupt data.
If you recognize such corruption early you can easily fix it by
setting the conversion type explicitly in .gitattributes. Right after
committing you still have the original file in your work tree and this file
is not yet corrupted. You can explicitly tell Git that this file is binary
and Git will handle the file appropriately.
Unfortunately, the desired effect of cleaning up text files with
mixed line endings and the undesired effect of corrupting binary files
cannot be distinguished. In both cases CRLFs are removed in an irreversible
way. For text files this is the right thing to do because CRLFs are line
endings, while for binary files converting CRLFs corrupts data.
Note, this safety check does not mean that a checkout will
generate a file identical to the original file for a different setting of
core.eol and core.autocrlf, but only for the current one. For
example, a text file with LF would be accepted with
core.eol=lf and could later be checked out with core.eol=crlf,
in which case the resulting file would contain CRLF, although the
original file contained LF. However, in both work trees the line
endings would be consistent, that is either all LF or all
CRLF, but never mixed. A file with mixed line endings would be
reported by the core.safecrlf mechanism.
core.autocrlf
Setting this variable to "true" is the same as
setting the text attribute to "auto" on all files and
core.eol to "crlf". Set to true if you want to have CRLF line
endings in your working directory and the repository has LF line endings. This
variable can be set to input, in which case no output conversion is
performed.
core.checkRoundtripEncoding
A comma and/or whitespace separated list of encodings
that Git performs UTF-8 round trip checks on if they are used in an
working-tree-encoding attribute (see
gitattributes(5)). The
default value is
SHIFT-JIS.
core.symlinks
If false, symbolic links are checked out as small plain
files that contain the link text.
git-update-index(1) and
git-add(1) will not change the recorded type to regular file. Useful on
filesystems like FAT that do not support symbolic links.
The default is true, except git-clone(1) or
git-init(1) will probe and set core.symlinks false if appropriate
when the repository is created.
core.gitProxy
A "proxy command" to execute (as
command
host port) instead of establishing direct connection to the remote server
when using the Git protocol for fetching. If the variable value is in the
"COMMAND for DOMAIN" format, the command is applied only on
hostnames ending with the specified domain string. This variable may be set
multiple times and is matched in the given order; the first match wins.
Can be overridden by the GIT_PROXY_COMMAND environment
variable (which always applies universally, without the special
"for" handling).
The special string none can be used as the proxy command to
specify that no proxy be used for a given domain pattern. This is useful for
excluding servers inside a firewall from proxy use, while defaulting to a
common proxy for external domains.
core.sshCommand
If this variable is set, git fetch and git
push will use the specified command instead of ssh when they need
to connect to a remote system. The command is in the same form as the
GIT_SSH_COMMAND environment variable and is overridden when the
environment variable is set.
core.ignoreStat
If true, Git will avoid using lstat() calls to detect if
files have changed by setting the "assume-unchanged" bit for those
tracked files which it has updated identically in both the index and working
tree.
When files are modified outside of Git, the user will need to
stage the modified files explicitly (e.g. see Examples section in
git-update-index(1)). Git will not normally detect changes to those
files.
This is useful on systems where lstat() calls are very slow, such
as CIFS/Microsoft Windows.
False by default.
core.preferSymlinkRefs
Instead of the default "symref" format for HEAD
and other symbolic reference files, use symbolic links. This is sometimes
needed to work with old scripts that expect HEAD to be a symbolic link.
core.alternateRefsCommand
When advertising tips of available history from an
alternate, use the shell to execute the specified command instead of
git-for-each-ref(1). The first argument is the absolute path of the
alternate. Output must contain one hex object id per line (i.e., the same as
produced by
git for-each-ref --format='%(objectname)').
Note that you cannot generally put git for-each-ref
directly into the config value, as it does not take a repository path as an
argument (but you can wrap the command above in a shell script).
core.alternateRefsPrefixes
When listing references from an alternate, list only
references that begin with the given prefix. Prefixes match as if they were
given as arguments to
git-for-each-ref(1). To list multiple prefixes,
separate them with whitespace. If
core.alternateRefsCommand is set,
setting
core.alternateRefsPrefixes has no effect.
core.bare
If true this repository is assumed to be
bare and
has no working directory associated with it. If this is the case a number of
commands that require a working directory will be disabled, such as
git-add(1) or
git-merge(1).
This setting is automatically guessed by git-clone(1) or
git-init(1) when the repository was created. By default a repository
that ends in "/.git" is assumed to be not bare (bare = false),
while all other repositories are assumed to be bare (bare = true).
core.worktree
Set the path to the root of the working tree. If
GIT_COMMON_DIR environment variable is set, core.worktree is ignored
and not used for determining the root of working tree. This can be overridden
by the
GIT_WORK_TREE environment variable and the
--work-tree
command-line option. The value can be an absolute path or relative to the path
to the .git directory, which is either specified by --git-dir or GIT_DIR, or
automatically discovered. If --git-dir or GIT_DIR is specified but none of
--work-tree, GIT_WORK_TREE and core.worktree is specified, the current working
directory is regarded as the top level of your working tree.
Note that this variable is honored even when set in a
configuration file in a ".git" subdirectory of a directory and its
value differs from the latter directory (e.g.
"/path/to/.git/config" has core.worktree set to
"/different/path"), which is most likely a misconfiguration.
Running Git commands in the "/path/to" directory will still use
"/different/path" as the root of the work tree and can cause
confusion unless you know what you are doing (e.g. you are creating a
read-only snapshot of the same index to a location different from the
repository’s usual working tree).
core.logAllRefUpdates
Enable the reflog. Updates to a ref <ref> is logged
to the file "
$GIT_DIR/logs/<ref>", by appending the new
and old SHA-1, the date/time and the reason of the update, but only when the
file exists. If this configuration variable is set to
true, missing
"
$GIT_DIR/logs/<ref>" file is automatically created for
branch heads (i.e. under
refs/heads/), remote refs (i.e. under
refs/remotes/), note refs (i.e. under
refs/notes/), and the
symbolic ref
HEAD. If it is set to
always, then a missing reflog
is automatically created for any ref under
refs/.
This information can be used to determine what commit was the tip
of a branch "2 days ago".
This value is true by default in a repository that has a working
directory associated with it, and false by default in a bare repository.
core.repositoryFormatVersion
Internal variable identifying the repository format and
layout version.
core.sharedRepository
When
group (or
true), the repository is
made shareable between several users in a group (making sure all the files and
objects are group-writable). When
all (or
world or
everybody), the repository will be readable by all users, additionally
to being group-shareable. When
umask (or
false), Git will use
permissions reported by
umask(2). When
0xxx, where
0xxx is an
octal number, files in the repository will have this mode value.
0xxx
will override user’s umask value (whereas the other options will only
override requested parts of the user’s umask value). Examples:
0660 will make the repo read/write-able for the owner and group, but
inaccessible to others (equivalent to
group unless umask is e.g.
0022).
0640 is a repository that is group-readable but not
group-writable. See
git-init(1). False by default.
core.warnAmbiguousRefs
If true, Git will warn you if the ref name you passed it
is ambiguous and might match multiple refs in the repository. True by
default.
core.compression
An integer -1..9, indicating a default compression level.
-1 is the zlib default. 0 means no compression, and 1..9 are various
speed/size tradeoffs, 9 being slowest. If set, this provides a default to
other compression variables, such as core.looseCompression and
pack.compression.
core.looseCompression
An integer -1..9, indicating the compression level for
objects that are not in a pack file. -1 is the zlib default. 0 means no
compression, and 1..9 are various speed/size tradeoffs, 9 being slowest. If
not set, defaults to core.compression. If that is not set, defaults to 1 (best
speed).
core.packedGitWindowSize
Number of bytes of a pack file to map into memory in a
single mapping operation. Larger window sizes may allow your system to process
a smaller number of large pack files more quickly. Smaller window sizes will
negatively affect performance due to increased calls to the operating
system’s memory manager, but may improve performance when accessing a
large number of large pack files.
Default is 1 MiB if NO_MMAP was set at compile time, otherwise 32
MiB on 32 bit platforms and 1 GiB on 64 bit platforms. This should be
reasonable for all users/operating systems. You probably do not need to
adjust this value.
Common unit suffixes of k, m, or g are
supported.
core.packedGitLimit
Maximum number of bytes to map simultaneously into memory
from pack files. If Git needs to access more than this many bytes at once to
complete an operation it will unmap existing regions to reclaim virtual
address space within the process.
Default is 256 MiB on 32 bit platforms and 32 TiB (effectively
unlimited) on 64 bit platforms. This should be reasonable for all
users/operating systems, except on the largest projects. You probably do not
need to adjust this value.
Common unit suffixes of k, m, or g are
supported.
core.deltaBaseCacheLimit
Maximum number of bytes per thread to reserve for caching
base objects that may be referenced by multiple deltified objects. By storing
the entire decompressed base objects in a cache Git is able to avoid unpacking
and decompressing frequently used base objects multiple times.
Default is 96 MiB on all platforms. This should be reasonable for
all users/operating systems, except on the largest projects. You probably do
not need to adjust this value.
Common unit suffixes of k, m, or g are
supported.
core.bigFileThreshold
Files larger than this size are stored deflated, without
attempting delta compression. Storing large files without delta compression
avoids excessive memory usage, at the slight expense of increased disk usage.
Additionally files larger than this size are always treated as binary.
Default is 512 MiB on all platforms. This should be reasonable for
most projects as source code and other text files can still be delta
compressed, but larger binary media files won’t be.
Common unit suffixes of k, m, or g are
supported.
core.excludesFile
Specifies the pathname to the file that contains patterns
to describe paths that are not meant to be tracked, in addition to
.gitignore (per-directory) and
.git/info/exclude. Defaults to
$XDG_CONFIG_HOME/git/ignore. If
$XDG_CONFIG_HOME is either not
set or empty,
$HOME/.config/git/ignore is used instead. See
gitignore(5).
core.askPass
Some commands (e.g. svn and http interfaces) that
interactively ask for a password can be told to use an external program given
via the value of this variable. Can be overridden by the GIT_ASKPASS
environment variable. If not set, fall back to the value of the
SSH_ASKPASS environment variable or, failing that, a simple password
prompt. The external program shall be given a suitable prompt as command-line
argument and write the password on its STDOUT.
core.attributesFile
In addition to
.gitattributes (per-directory) and
.git/info/attributes, Git looks into this file for attributes (see
gitattributes(5)). Path expansions are made the same way as for
core.excludesFile. Its default value is
$XDG_CONFIG_HOME/git/attributes. If
$XDG_CONFIG_HOME is either
not set or empty,
$HOME/.config/git/attributes is used instead.
core.hooksPath
By default Git will look for your hooks in the
$GIT_DIR/hooks directory. Set this to different path, e.g.
/etc/git/hooks, and Git will try to find your hooks in that directory,
e.g.
/etc/git/hooks/pre-receive instead of in
$GIT_DIR/hooks/pre-receive.
The path can be either absolute or relative. A relative path is
taken as relative to the directory where the hooks are run (see the
"DESCRIPTION" section of githooks(5)).
This configuration variable is useful in cases where you’d
like to centrally configure your Git hooks instead of configuring them on a
per-repository basis, or as a more flexible and centralized alternative to
having an init.templateDir where you’ve changed default
hooks.
core.editor
Commands such as
commit and
tag that let
you edit messages by launching an editor use the value of this variable when
it is set, and the environment variable
GIT_EDITOR is not set. See
git-var(1).
core.commentChar
Commands such as
commit and
tag that let
you edit messages consider a line that begins with this character commented,
and removes them after the editor returns (default
#).
If set to "auto", git-commit would select a
character that is not the beginning character of any line in existing commit
messages.
core.filesRefLockTimeout
The length of time, in milliseconds, to retry when trying
to lock an individual reference. Value 0 means not to retry at all; -1 means
to try indefinitely. Default is 100 (i.e., retry for 100ms).
core.packedRefsTimeout
The length of time, in milliseconds, to retry when trying
to lock the packed-refs file. Value 0 means not to retry at all; -1
means to try indefinitely. Default is 1000 (i.e., retry for 1 second).
core.pager
Text viewer for use by Git commands (e.g.,
less).
The value is meant to be interpreted by the shell. The order of preference is
the
$GIT_PAGER environment variable, then
core.pager
configuration, then
$PAGER, and then the default chosen at compile time
(usually
less).
When the LESS environment variable is unset, Git sets it to
FRX (if LESS environment variable is set, Git does not change
it at all). If you want to selectively override Git’s default setting
for LESS, you can set core.pager to e.g. less -S. This
will be passed to the shell by Git, which will translate the final command
to LESS=FRX less -S. The environment does not set the S option
but the command line does, instructing less to truncate long lines.
Similarly, setting core.pager to less -+F will deactivate the
F option specified by the environment from the command-line,
deactivating the "quit if one screen" behavior of less. One
can specifically activate some flags for particular commands: for example,
setting pager.blame to less -S enables line truncation only
for git blame.
Likewise, when the LV environment variable is unset, Git
sets it to -c. You can override this setting by exporting LV
with another value or setting core.pager to lv +c.
core.whitespace
A comma separated list of common whitespace problems to
notice.
git diff will use
color.diff.whitespace to highlight
them, and
git apply --whitespace=error will consider them as errors.
You can prefix
- to disable any of them (e.g.
-trailing-space):
•blank-at-eol treats trailing whitespaces
at the end of the line as an error (enabled by default).
•space-before-tab treats a space character
that appears immediately before a tab character in the initial indent part of
the line as an error (enabled by default).
•indent-with-non-tab treats a line that is
indented with space characters instead of the equivalent tabs as an error (not
enabled by default).
•tab-in-indent treats a tab character in
the initial indent part of the line as an error (not enabled by
default).
•blank-at-eof treats blank lines added at
the end of file as an error (enabled by default).
•trailing-space is a short-hand to cover
both blank-at-eol and blank-at-eof.
•cr-at-eol treats a carriage-return at the
end of line as part of the line terminator, i.e. with it,
trailing-space does not trigger if the character before such a
carriage-return is not a whitespace (not enabled by default).
•tabwidth=<n> tells how many
character positions a tab occupies; this is relevant for
indent-with-non-tab and when Git fixes tab-in-indent errors. The
default tab width is 8. Allowed values are 1 to 63.
core.fsyncObjectFiles
This boolean will enable
fsync() when writing
object files.
This is a total waste of time and effort on a filesystem that
orders data writes properly, but can be useful for filesystems that do not
use journalling (traditional UNIX filesystems) or that only journal metadata
and not file contents (OS X’s HFS+, or Linux ext3 with
"data=writeback").
core.preloadIndex
Enable parallel index preload for operations like
git
diff
This can speed up operations like git diff and git
status especially on filesystems like NFS that have weak caching
semantics and thus relatively high IO latencies. When enabled, Git will do
the index comparison to the filesystem data in parallel, allowing
overlapping IO’s. Defaults to true.
core.unsetenvvars
Windows-only: comma-separated list of environment
variables' names that need to be unset before spawning any other process.
Defaults to PERL5LIB to account for the fact that Git for Windows
insists on using its own Perl interpreter.
core.restrictinheritedhandles
Windows-only: override whether spawned processes inherit
only standard file handles (stdin, stdout and stderr) or
all handles. Can be auto, true or false. Defaults to
auto, which means true on Windows 7 and later, and false
on older Windows versions.
core.createObject
You can set this to
link, in which case a hardlink
followed by a delete of the source are used to make sure that object creation
will not overwrite existing objects.
On some file system/operating system combinations, this is
unreliable. Set this config setting to rename there; However, This
will remove the check that makes sure that existing object files will not
get overwritten.
core.notesRef
When showing commit messages, also show notes which are
stored in the given ref. The ref must be fully qualified. If the given ref
does not exist, it is not an error but means that no notes should be printed.
This setting defaults to "refs/notes/commits", and it
can be overridden by the GIT_NOTES_REF environment variable. See
git-notes(1).
core.commitGraph
If true, then git will read the commit-graph file (if it
exists) to parse the graph structure of commits. Defaults to true. See
git-commit-graph(1) for more information.
core.useReplaceRefs
If set to
false, behave as if the
--no-replace-objects option was given on the command line. See
git(1) and
git-replace(1) for more information.
core.multiPackIndex
Use the multi-pack-index file to track multiple packfiles
using a single index. See
git-multi-pack-index(1) for more information.
Defaults to true.
core.sparseCheckout
core.sparseCheckoutCone
Enables the "cone mode" of the sparse checkout
feature. When the sparse-checkout file contains a limited set of patterns,
then this mode provides significant performance advantages. See
git-sparse-checkout(1) for more information.
core.abbrev
Set the length object names are abbreviated to. If
unspecified or set to "auto", an appropriate value is computed based
on the approximate number of packed objects in your repository, which
hopefully is enough for abbreviated object names to stay unique for some time.
If set to "no", no abbreviation is made and the object names are
shown in their full length. The minimum length is 4.
add.ignoreErrors, add.ignore-errors (deprecated)
Tells
git add to continue adding files when some
files cannot be added due to indexing errors. Equivalent to the
--ignore-errors option of
git-add(1).
add.ignore-errors
is deprecated, as it does not follow the usual naming convention for
configuration variables.
add.interactive.useBuiltin
[EXPERIMENTAL] Set to
true to use the experimental
built-in implementation of the interactive version of
git-add(1)
instead of the Perl script version. Is
false by default.
alias.*
Command aliases for the
git(1) command wrapper -
e.g. after defining
alias.last = cat-file commit HEAD, the invocation
git last is equivalent to
git cat-file commit HEAD. To avoid
confusion and troubles with script usage, aliases that hide existing Git
commands are ignored. Arguments are split by spaces, the usual shell quoting
and escaping is supported. A quote pair or a backslash can be used to quote
them.
Note that the first word of an alias does not necessarily have to
be a command. It can be a command-line option that will be passed into the
invocation of git. In particular, this is useful when used with
-c to pass in one-time configurations or -p to force
pagination. For example, loud-rebase = -c commit.verbose=true rebase
can be defined such that running git loud-rebase would be equivalent
to git -c commit.verbose=true rebase. Also, ps = -p status
would be a helpful alias since git ps would paginate the output of
git status where the original command does not.
If the alias expansion is prefixed with an exclamation point, it
will be treated as a shell command. For example, defining alias.new =
!gitk --all --not ORIG_HEAD, the invocation git new is equivalent
to running the shell command gitk --all --not ORIG_HEAD. Note that
shell commands will be executed from the top-level directory of a
repository, which may not necessarily be the current directory.
GIT_PREFIX is set as returned by running git rev-parse
--show-prefix from the original current directory. See
git-rev-parse(1).
am.keepcr
If true, git-am will call git-mailsplit for patches in
mbox format with parameter
--keep-cr. In this case git-mailsplit will
not remove
\r from lines ending with
\r\n. Can be overridden by
giving
--no-keep-cr from the command line. See
git-am(1),
git-mailsplit(1).
am.threeWay
By default,
git am will fail if the patch does not
apply cleanly. When set to true, this setting tells
git am to fall back
on 3-way merge if the patch records the identity of blobs it is supposed to
apply to and we have those blobs available locally (equivalent to giving the
--3way option from the command line). Defaults to
false. See
git-am(1).
apply.ignoreWhitespace
When set to
change, tells
git apply to
ignore changes in whitespace, in the same way as the
--ignore-space-change option. When set to one of: no, none, never,
false tells
git apply to respect all whitespace differences. See
git-apply(1).
apply.whitespace
Tells
git apply how to handle whitespaces, in the
same way as the
--whitespace option. See
git-apply(1).
blame.blankBoundary
Show blank commit object name for boundary commits in
git-blame(1). This option defaults to false.
blame.coloring
This determines the coloring scheme to be applied to
blame output. It can be repeatedLines, highlightRecent, or
none which is the default.
blame.date
Specifies the format used to output dates in
git-blame(1). If unset the iso format is used. For supported values,
see the discussion of the
--date option at
git-log(1).
blame.showEmail
Show the author email instead of author name in
git-blame(1). This option defaults to false.
blame.showRoot
Do not treat root commits as boundaries in
git-blame(1). This option defaults to false.
blame.ignoreRevsFile
Ignore revisions listed in the file, one unabbreviated
object name per line, in
git-blame(1). Whitespace and comments
beginning with
# are ignored. This option may be repeated multiple
times. Empty file names will reset the list of ignored revisions. This option
will be handled before the command line option
--ignore-revs-file.
blame.markUnblamableLines
Mark lines that were changed by an ignored revision that
we could not attribute to another commit with a
* in the output of
git-blame(1).
blame.markIgnoredLines
Mark lines that were changed by an ignored revision that
we attributed to another commit with a
? in the output of
git-blame(1).
branch.autoSetupMerge
Tells
git branch,
git switch and
git
checkout to set up new branches so that
git-pull(1) will
appropriately merge from the starting point branch. Note that even if this
option is not set, this behavior can be chosen per-branch using the
--track and
--no-track options. The valid settings are:
false — no automatic setup is done;
true —
automatic setup is done when the starting point is a remote-tracking branch;
always — automatic setup is done when the starting point is
either a local branch or remote-tracking branch;
inherit — if
the starting point has a tracking configuration, it is copied to the new
branch. This option defaults to true.
branch.autoSetupRebase
When a new branch is created with git branch,
git switch or git checkout that tracks another branch, this
variable tells Git to set up pull to rebase instead of merge (see
"branch.<name>.rebase"). When never, rebase is never
automatically set to true. When local, rebase is set to true for
tracked branches of other local branches. When remote, rebase is set to
true for tracked branches of remote-tracking branches. When always,
rebase will be set to true for all tracking branches. See
"branch.autoSetupMerge" for details on how to set up a branch to
track another branch. This option defaults to never.
branch.sort
This variable controls the sort ordering of branches when
displayed by
git-branch(1). Without the
"--sort=<value>" option provided, the value of this variable
will be used as the default. See
git-for-each-ref(1) field names for
valid values.
branch.<name>.remote
When on branch <name>, it tells git fetch
and git push which remote to fetch from/push to. The remote to push to
may be overridden with remote.pushDefault (for all branches). The
remote to push to, for the current branch, may be further overridden by
branch.<name>.pushRemote. If no remote is configured, or if you
are not on any branch, it defaults to origin for fetching and
remote.pushDefault for pushing. Additionally, . (a period) is
the current local repository (a dot-repository), see
branch.<name>.merge's final note below.
branch.<name>.pushRemote
When on branch <name>, it overrides
branch.<name>.remote for pushing. It also overrides
remote.pushDefault for pushing from branch <name>. When you pull
from one place (e.g. your upstream) and push to another place (e.g. your own
publishing repository), you would want to set remote.pushDefault to
specify the remote to push to for all branches, and use this option to
override it for a specific branch.
branch.<name>.merge
Defines, together with branch.<name>.remote, the
upstream branch for the given branch. It tells git fetch/git
pull/git rebase which branch to merge and can also affect git
push (see push.default). When in branch <name>, it tells git
fetch the default refspec to be marked for merging in FETCH_HEAD. The
value is handled like the remote part of a refspec, and must match a ref which
is fetched from the remote given by "branch.<name>.remote".
The merge information is used by git pull (which at first calls git
fetch) to lookup the default branch for merging. Without this option,
git pull defaults to merge the first refspec fetched. Specify multiple
values to get an octopus merge. If you wish to setup git pull so that
it merges into <name> from another branch in the local repository, you
can point branch.<name>.merge to the desired branch, and use the
relative path setting . (a period) for
branch.<name>.remote.
branch.<name>.mergeOptions
Sets default options for merging into branch
<name>. The syntax and supported options are the same as those of
git-merge(1), but option values containing whitespace characters are
currently not supported.
branch.<name>.rebase
When true, rebase the branch <name> on top of the
fetched branch, instead of merging the default branch from the default remote
when "git pull" is run. See "pull.rebase" for doing this
in a non branch-specific manner.
When merges (or just m), pass the
--rebase-merges option to git rebase so that the local merge
commits are included in the rebase (see git-rebase(1) for
details).
When the value is interactive (or just i), the
rebase is run in interactive mode.
NOTE: this is a possibly dangerous operation; do not
use it unless you understand the implications (see git-rebase(1) for
details).
branch.<name>.description
Branch description, can be edited with git branch
--edit-description. Branch description is automatically added in the
format-patch cover letter or request-pull summary.
browser.<tool>.cmd
Specify the command to invoke the specified browser. The
specified command is evaluated in shell with the URLs passed as arguments.
(See
git-web--browse(1).)
browser.<tool>.path
Override the path for the given tool that may be used to
browse HTML help (see
-w option in
git-help(1)) or a working
repository in gitweb (see
git-instaweb(1)).
checkout.defaultRemote
When you run
git checkout <something> or
git switch <something> and only have one remote, it may
implicitly fall back on checking out and tracking e.g.
origin/<something>. This stops working as soon as you have more
than one remote with a
<something> reference. This setting allows
for setting the name of a preferred remote that should always win when it
comes to disambiguation. The typical use-case is to set this to
origin.
Currently this is used by git-switch(1) and
git-checkout(1) when git checkout <something> or git
switch <something> will checkout the <something>
branch on another remote, and by git-worktree(1) when git worktree
add refers to a remote branch. This setting might be used for other
checkout-like commands or functionality in the future.
checkout.guess
checkout.workers
The number of parallel workers to use when updating the
working tree. The default is one, i.e. sequential execution. If set to a value
less than one, Git will use as many workers as the number of logical cores
available. This setting and
checkout.thresholdForParallelism affect all
commands that perform checkout. E.g. checkout, clone, reset, sparse-checkout,
etc.
Note: parallel checkout usually delivers better performance for
repositories located on SSDs or over NFS. For repositories on spinning disks
and/or machines with a small number of cores, the default sequential
checkout often performs better. The size and compression level of a
repository might also influence how well the parallel version performs.
checkout.thresholdForParallelism
When running parallel checkout with a small number of
files, the cost of subprocess spawning and inter-process communication might
outweigh the parallelization gains. This setting allows to define the minimum
number of files for which parallel checkout should be attempted. The default
is 100.
clean.requireForce
A boolean to make git-clean do nothing unless given -f,
-i or -n. Defaults to true.
clone.defaultRemoteName
The name of the remote to create when cloning a
repository. Defaults to
origin, and can be overridden by passing the
--origin command-line option to
git-clone(1).
clone.rejectShallow
Reject to clone a repository if it is a shallow one, can
be overridden by passing option
--reject-shallow in command line. See
git-clone(1)
color.advice
A boolean to enable/disable color in hints (e.g. when a
push failed, see advice.* for a list). May be set to always,
false (or never) or auto (or true), in which case
colors are used only when the error output goes to a terminal. If unset, then
the value of color.ui is used (auto by default).
color.advice.hint
Use customized color for hints.
color.blame.highlightRecent
Specify the line annotation color for
git blame
--color-by-age depending upon the age of the line.
This setting should be set to a comma-separated list of color and
date settings, starting and ending with a color, the dates should be set
from oldest to newest. The metadata will be colored with the specified
colors if the line was introduced before the given timestamp, overwriting
older timestamped colors.
Instead of an absolute timestamp relative timestamps work as well,
e.g. 2.weeks.ago is valid to address anything older than 2 weeks.
It defaults to blue,12 month ago,white,1 month ago,red,
which colors everything older than one year blue, recent changes between one
month and one year old are kept white, and lines introduced within the last
month are colored red.
color.blame.repeatedLines
Use the specified color to colorize line annotations for
git blame --color-lines, if they come from the same commit as the
preceding line. Defaults to cyan.
color.branch
A boolean to enable/disable color in the output of
git-branch(1). May be set to
always,
false (or
never) or
auto (or
true), in which case colors are used
only when the output is to a terminal. If unset, then the value of
color.ui is used (
auto by default).
color.branch.<slot>
Use customized color for branch coloration.
<slot> is one of current (the current branch),
local (a local branch), remote (a remote-tracking branch in
refs/remotes/), upstream (upstream tracking branch), plain
(other refs).
color.diff
Whether to use ANSI escape sequences to add color to
patches. If this is set to
always,
git-diff(1),
git-log(1), and
git-show(1) will use color for all patches. If
it is set to
true or
auto, those commands will only use color
when output is to the terminal. If unset, then the value of
color.ui is
used (
auto by default).
This does not affect git-format-patch(1) or the
git-diff-* plumbing commands. Can be overridden on the command line
with the --color[=<when>] option.
color.diff.<slot>
Use customized color for diff colorization.
<slot> specifies which part of the patch to use the specified
color, and is one of
context (context text -
plain is a
historical synonym),
meta (metainformation),
frag (hunk header),
func (function in hunk header),
old (removed lines),
new
(added lines),
commit (commit headers),
whitespace (highlighting
whitespace errors),
oldMoved (deleted lines),
newMoved (added
lines),
oldMovedDimmed,
oldMovedAlternative,
oldMovedAlternativeDimmed,
newMovedDimmed,
newMovedAlternative newMovedAlternativeDimmed (See the
<mode> setting of
--color-moved in
git-diff(1) for
details),
contextDimmed,
oldDimmed,
newDimmed,
contextBold,
oldBold, and
newBold (see
git-range-diff(1) for details).
color.decorate.<slot>
Use customized color for git log --decorate
output. <slot> is one of branch, remoteBranch,
tag, stash or HEAD for local branches, remote-tracking
branches, tags, stash and HEAD, respectively and grafted for grafted
commits.
color.grep
When set to always, always highlight matches. When
false (or never), never. When set to true or auto,
use color only when the output is written to the terminal. If unset, then the
value of color.ui is used (auto by default).
color.grep.<slot>
Use customized color for grep colorization.
<slot> specifies which part of the line to use the specified
color, and is one of
context
non-matching text in context lines (when using -A,
-B, or -C)
filename
filename prefix (when not using -h)
function
function name lines (when using -p)
lineNumber
line number prefix (when using -n)
column
column number prefix (when using --column)
match
matching text (same as setting matchContext and
matchSelected)
matchContext
matching text in context lines
matchSelected
matching text in selected lines. Also, used to customize
the following
git-log(1) subcommands:
--grep,
--author
and
--committer.
selected
non-matching text in selected lines. Also, used to
customize the following
git-log(1) subcommands:
--grep,
--author and
--committer.
separator
separators between fields on a line (:, -,
and =) and between hunks (--)
color.interactive
When set to always, always use colors for
interactive prompts and displays (such as those used by "git-add
--interactive" and "git-clean --interactive"). When false (or
never), never. When set to true or auto, use colors only
when the output is to the terminal. If unset, then the value of
color.ui is used (auto by default).
color.interactive.<slot>
Use customized color for git add --interactive and
git clean --interactive output. <slot> may be
prompt, header, help or error, for four distinct
types of normal output from interactive commands.
color.pager
A boolean to specify whether auto color modes
should colorize output going to the pager. Defaults to true; set this to false
if your pager does not understand ANSI color codes.
color.push
A boolean to enable/disable color in push errors. May be
set to always, false (or never) or auto (or
true), in which case colors are used only when the error output goes to
a terminal. If unset, then the value of color.ui is used (auto
by default).
color.push.error
Use customized color for push errors.
color.remote
If set, keywords at the start of the line are
highlighted. The keywords are "error", "warning",
"hint" and "success", and are matched case-insensitively.
May be set to always, false (or never) or auto (or
true). If unset, then the value of color.ui is used (auto
by default).
color.remote.<slot>
Use customized color for each remote keyword.
<slot> may be hint, warning, success or
error which match the corresponding keyword.
color.showBranch
A boolean to enable/disable color in the output of
git-show-branch(1). May be set to
always,
false (or
never) or
auto (or
true), in which case colors are used
only when the output is to a terminal. If unset, then the value of
color.ui is used (
auto by default).
color.status
A boolean to enable/disable color in the output of
git-status(1). May be set to
always,
false (or
never) or
auto (or
true), in which case colors are used
only when the output is to a terminal. If unset, then the value of
color.ui is used (
auto by default).
color.status.<slot>
Use customized color for status colorization.
<slot> is one of header (the header text of the status
message), added or updated (files which are added but not
committed), changed (files which are changed but not added in the
index), untracked (files which are not tracked by Git), branch
(the current branch), nobranch (the color the no branch warning
is shown in, defaulting to red), localBranch or remoteBranch
(the local and remote branch names, respectively, when branch and tracking
information is displayed in the status short-format), or unmerged
(files which have unmerged changes).
color.transport
A boolean to enable/disable color when pushes are
rejected. May be set to always, false (or never) or
auto (or true), in which case colors are used only when the
error output goes to a terminal. If unset, then the value of color.ui
is used (auto by default).
color.transport.rejected
Use customized color when a push was rejected.
color.ui
This variable determines the default value for variables
such as color.diff and color.grep that control the use of color
per command family. Its scope will expand as more commands learn configuration
to set a default for the --color option. Set it to false or
never if you prefer Git commands not to use color unless enabled
explicitly with some other configuration or the --color option. Set it
to always if you want all output not intended for machine consumption
to use color, to true or auto (this is the default since Git
1.8.4) if you want such output to use color when written to the
terminal.
column.ui
Specify whether supported commands should output in
columns. This variable consists of a list of tokens separated by spaces or
commas:
These options control when the feature should be enabled (defaults
to never):
always
always show in columns
never
never show in columns
auto
show in columns if the output is to the terminal
These options control layout (defaults to column). Setting
any of these implies always if none of always, never,
or auto are specified.
column
fill columns before rows
row
fill rows before columns
plain
show in one column
Finally, these options can be combined with a layout option
(defaults to nodense):
dense
make unequal size columns to utilize more space
nodense
make equal size columns
column.branch
Specify whether to output branch listing in git
branch in columns. See column.ui for details.
column.clean
Specify the layout when list items in git clean
-i, which always shows files and directories in columns. See
column.ui for details.
column.status
Specify whether to output untracked files in git
status in columns. See column.ui for details.
column.tag
Specify whether to output tag listing in git tag
in columns. See column.ui for details.
commit.cleanup
This setting overrides the default of the
--cleanup option in
git commit. See
git-commit(1) for
details. Changing the default can be useful when you always want to keep lines
that begin with comment character
# in your log message, in which case
you would do
git config commit.cleanup whitespace (note that you will
have to remove the help lines that begin with
# in the commit log
template yourself, if you do this).
commit.gpgSign
A boolean to specify whether all commits should be GPG
signed. Use of this option when doing operations such as rebase can result in
a large number of commits being signed. It may be convenient to use an agent
to avoid typing your GPG passphrase several times.
commit.status
A boolean to enable/disable inclusion of status
information in the commit message template when using an editor to prepare the
commit message. Defaults to true.
commit.template
Specify the pathname of a file to use as the template for
new commit messages.
commit.verbose
A boolean or int to specify the level of verbose with
git commit. See
git-commit(1).
commitGraph.generationVersion
Specifies the type of generation number version to use
when writing or reading the commit-graph file. If version 1 is specified, then
the corrected commit dates will not be written or read. Defaults to 2.
commitGraph.maxNewFilters
Specifies the default value for the
--max-new-filters option of
git commit-graph write (c.f.,
git-commit-graph(1)).
commitGraph.readChangedPaths
If true, then git will use the changed-path Bloom filters
in the commit-graph file (if it exists, and they are present). Defaults to
true. See
git-commit-graph(1) for more information.
credential.helper
Specify an external helper to be called when a username
or password credential is needed; the helper may consult external storage to
avoid prompting the user for the credentials. This is normally the name of a
credential helper with possible arguments, but may also be an absolute path
with arguments or, if preceded by
!, shell commands.
Note that multiple helpers may be defined. See
gitcredentials(7) for details and examples.
credential.useHttpPath
When acquiring credentials, consider the "path"
component of an http or https URL to be important. Defaults to false. See
gitcredentials(7) for more information.
credential.username
If no username is set for a network authentication, use
this username by default. See credential.<context>.* below, and
gitcredentials(7).
credential.<url>.*
Any of the credential.* options above can be applied
selectively to some credentials. For example
"credential.
https://example.com.username" would set the default
username only for https connections to example.com. See
gitcredentials(7) for details on how URLs are matched.
credentialCache.ignoreSIGHUP
Tell git-credential-cache—daemon to ignore SIGHUP,
instead of quitting.
credentialStore.lockTimeoutMS
The length of time, in milliseconds, for
git-credential-store to retry when trying to lock the credentials file. Value
0 means not to retry at all; -1 means to try indefinitely. Default is 1000
(i.e., retry for 1s).
completion.commands
This is only used by git-completion.bash to add or remove
commands from the list of completed commands. Normally only porcelain commands
and a few select others are completed. You can add more commands, separated by
space, in this variable. Prefixing the command with - will remove it
from the existing list.
diff.autoRefreshIndex
When using git diff to compare with work tree
files, do not consider stat-only change as changed. Instead, silently run
git update-index --refresh to update the cached stat information for
paths whose contents in the work tree match the contents in the index. This
option defaults to true. Note that this affects only git diff
Porcelain, and not lower level diff commands such as git
diff-files.
diff.dirstat
A comma separated list of
--dirstat parameters
specifying the default behavior of the
--dirstat option to
git-diff(1) and friends. The defaults can be overridden on the command
line (using
--dirstat=<param1,param2,...>). The fallback defaults
(when not changed by
diff.dirstat) are
changes,noncumulative,3.
The following parameters are available:
changes
Compute the dirstat numbers by counting the lines that
have been removed from the source, or added to the destination. This ignores
the amount of pure code movements within a file. In other words, rearranging
lines in a file is not counted as much as other changes. This is the default
behavior when no parameter is given.
lines
Compute the dirstat numbers by doing the regular
line-based diff analysis, and summing the removed/added line counts. (For
binary files, count 64-byte chunks instead, since binary files have no natural
concept of lines). This is a more expensive --dirstat behavior than the
changes behavior, but it does count rearranged lines within a file as
much as other changes. The resulting output is consistent with what you get
from the other --*stat options.
files
Compute the dirstat numbers by counting the number of
files changed. Each changed file counts equally in the dirstat analysis. This
is the computationally cheapest --dirstat behavior, since it does not
have to look at the file contents at all.
cumulative
Count changes in a child directory for the parent
directory as well. Note that when using cumulative, the sum of the
percentages reported may exceed 100%. The default (non-cumulative) behavior
can be specified with the noncumulative parameter.
<limit>
An integer parameter specifies a cut-off percent (3% by
default). Directories contributing less than this percentage of the changes
are not shown in the output.
Example: The following will count changed files, while ignoring
directories with less than 10% of the total amount of changed files, and
accumulating child directory counts in the parent directories:
files,10,cumulative.
diff.statGraphWidth
Limit the width of the graph part in --stat output. If
set, applies to all commands generating --stat output except
format-patch.
diff.context
Generate diffs with <n> lines of context instead of
the default of 3. This value is overridden by the -U option.
diff.interHunkContext
Show the context between diff hunks, up to the specified
number of lines, thereby fusing the hunks that are close to each other. This
value serves as the default for the --inter-hunk-context command line
option.
diff.external
If this config variable is set, diff generation is not
performed using the internal diff machinery, but using the given command. Can
be overridden with the ‘GIT_EXTERNAL_DIFF’ environment variable.
The command is called with parameters as described under "git Diffs"
in
git(1). Note: if you want to use an external diff program only on a
subset of your files, you might want to use
gitattributes(5)
instead.
diff.ignoreSubmodules
Sets the default value of --ignore-submodules. Note that
this affects only git diff Porcelain, and not lower level diff
commands such as git diff-files. git checkout and git
switch also honor this setting when reporting uncommitted changes. Setting
it to all disables the submodule summary normally shown by git
commit and git status when status.submoduleSummary is set
unless it is overridden by using the --ignore-submodules command-line option.
The git submodule commands are not affected by this setting. By default
this is set to untracked so that any untracked submodules are ignored.
diff.mnemonicPrefix
If set,
git diff uses a prefix pair that is
different from the standard "a/" and "b/" depending on
what is being compared. When this configuration is in effect, reverse diff
output also swaps the order of the prefixes:
git diff
compares the (i)ndex and the (w)ork tree;
git diff HEAD
compares a (c)ommit and the (w)ork tree;
git diff --cached
compares a (c)ommit and the (i)ndex;
git diff HEAD:file1 file2
compares an (o)bject and a (w)ork tree entity;
git diff --no-index a b
compares two non-git things (1) and (2).
diff.noprefix
If set, git diff does not show any source or
destination prefix.
diff.relative
If set to true, git diff does not show
changes outside of the directory and show pathnames relative to the current
directory.
diff.orderFile
File indicating how to order files within a diff. See the
-O option to
git-diff(1) for details. If
diff.orderFile
is a relative pathname, it is treated as relative to the top of the working
tree.
diff.renameLimit
The number of files to consider in the exhaustive portion
of copy/rename detection; equivalent to the git diff option -l.
If not set, the default value is currently 1000. This setting has no effect if
rename detection is turned off.
diff.renames
Whether and how Git detects renames. If set to
"false", rename detection is disabled. If set to "true",
basic rename detection is enabled. If set to "copies" or
"copy", Git will detect copies, as well. Defaults to true. Note that
this affects only
git diff Porcelain like
git-diff(1) and
git-log(1), and not lower level commands such as
git-diff-files(1).
diff.suppressBlankEmpty
A boolean to inhibit the standard behavior of printing a
space before each empty output line. Defaults to false.
diff.submodule
Specify the format in which differences in submodules are
shown. The "short" format just shows the names of the commits at the
beginning and end of the range. The "log" format lists the commits
in the range like
git-submodule(1) summary does. The
"diff" format shows an inline diff of the changed contents of the
submodule. Defaults to "short".
diff.wordRegex
A POSIX Extended Regular Expression used to determine
what is a "word" when performing word-by-word difference
calculations. Character sequences that match the regular expression are
"words", all other characters are ignorable whitespace.
diff.<driver>.command
diff.<driver>.xfuncname
The regular expression that the diff driver should use to
recognize the hunk header. A built-in pattern may also be used. See
gitattributes(5) for details.
diff.<driver>.binary
Set this option to true to make the diff driver treat
files as binary. See
gitattributes(5) for details.
diff.<driver>.textconv
The command that the diff driver should call to generate
the text-converted version of a file. The result of the conversion is used to
generate a human-readable diff. See
gitattributes(5) for details.
diff.<driver>.wordRegex
The regular expression that the diff driver should use to
split words in a line. See
gitattributes(5) for details.
diff.<driver>.cachetextconv
Set this option to true to make the diff driver cache the
text conversion outputs. See
gitattributes(5) for details.
diff.tool
Controls which diff tool is used by
git-difftool(1). This variable overrides the value configured in
merge.tool. The list below shows the valid built-in values. Any other
value is treated as a custom diff tool and requires that a corresponding
difftool.<tool>.cmd variable is defined.
diff.guitool
Controls which diff tool is used by
git-difftool(1) when the -g/--gui flag is specified. This variable
overrides the value configured in
merge.guitool. The list below shows
the valid built-in values. Any other value is treated as a custom diff tool
and requires that a corresponding difftool.<guitool>.cmd variable is
defined.
•araxis
•bc
•bc3
•bc4
•codecompare
•deltawalker
•diffmerge
•diffuse
•ecmerge
•emerge
•examdiff
•guiffy
•gvimdiff
•gvimdiff1
•gvimdiff2
•gvimdiff3
•kdiff3
•kompare
•meld
•nvimdiff
•nvimdiff1
•nvimdiff2
•nvimdiff3
•opendiff
•p4merge
•smerge
•tkdiff
•vimdiff
•vimdiff1
•vimdiff2
•vimdiff3
•winmerge
•xxdiff
diff.indentHeuristic
Set this option to false to disable the default
heuristics that shift diff hunk boundaries to make patches easier to
read.
diff.algorithm
Choose a diff algorithm. The variants are as follows:
default, myers
The basic greedy diff algorithm. Currently, this is the
default.
minimal
Spend extra time to make sure the smallest possible diff
is produced.
patience
Use "patience diff" algorithm when generating
patches.
histogram
This algorithm extends the patience algorithm to
"support low-occurrence common elements".
diff.wsErrorHighlight
Highlight whitespace errors in the context,
old or new lines of the diff. Multiple values are separated by
comma, none resets previous values, default reset the list to
new and all is a shorthand for old,new,context. The
whitespace errors are colored with color.diff.whitespace. The command
line option --ws-error-highlight=<kind> overrides this
setting.
diff.colorMoved
If set to either a valid
<mode> or a true
value, moved lines in a diff are colored differently, for details of valid
modes see
--color-moved in
git-diff(1). If simply set to true
the default color mode will be used. When set to false, moved lines are not
colored.
diff.colorMovedWS
When moved lines are colored using e.g. the
diff.colorMoved setting, this option controls the
<mode>
how spaces are treated for details of valid modes see
--color-moved-ws
in
git-diff(1).
difftool.<tool>.path
Override the path for the given tool. This is useful in
case your tool is not in the PATH.
difftool.<tool>.cmd
Specify the command to invoke the specified diff tool.
The specified command is evaluated in shell with the following variables
available: LOCAL is set to the name of the temporary file containing
the contents of the diff pre-image and REMOTE is set to the name of the
temporary file containing the contents of the diff post-image.
difftool.prompt
Prompt before each invocation of the diff tool.
extensions.objectFormat
Specify the hash algorithm to use. The acceptable values
are
sha1 and
sha256. If not specified,
sha1 is assumed.
It is an error to specify this key unless
core.repositoryFormatVersion
is 1.
Note that this setting should only be set by git-init(1) or
git-clone(1). Trying to change it after initialization will not work
and will produce hard-to-diagnose issues.
fastimport.unpackLimit
If the number of objects imported by
git-fast-import(1) is below this limit, then the objects will be
unpacked into loose object files. However if the number of imported objects
equals or exceeds this limit then the pack will be stored as a pack. Storing
the pack from a fast-import can make the import operation complete faster,
especially on slow filesystems. If not set, the value of
transfer.unpackLimit is used instead.
feature.*
The config settings that start with feature.
modify the defaults of a group of other config settings. These groups are
created by the Git developer community as recommended defaults and are subject
to change. In particular, new config options may be added with different
defaults.
feature.experimental
Enable config options that are new to Git, and are being
considered for future defaults. Config settings included here may be added or
removed with each release, including minor version updates. These settings may
have unintended interactions since they are so new. Please enable this setting
if you are interested in providing feedback on experimental features. The new
default values are:
•fetch.negotiationAlgorithm=skipping may
improve fetch negotiation times by skipping more commits at a time, reducing
the number of round trips.
feature.manyFiles
Enable config options that optimize for repos with many
files in the working directory. With many files, commands such as
git
status and
git checkout may be slow and these new defaults improve
performance:
•index.version=4 enables path-prefix
compression in the index.
•core.untrackedCache=true enables the
untracked cache. This setting assumes that mtime is working on your
machine.
fetch.recurseSubmodules
This option controls whether git fetch (and the
underlying fetch in git pull) will recursively fetch into populated
submodules. This option can be set either to a boolean value or to
on-demand. Setting it to a boolean changes the behavior of fetch and
pull to recurse unconditionally into submodules when set to true or to not
recurse at all when set to false. When set to on-demand, fetch and pull
will only recurse into a populated submodule when its superproject retrieves a
commit that updates the submodule’s reference. Defaults to
on-demand, or to the value of submodule.recurse if set.
fetch.fsckObjects
If it is set to true, git-fetch-pack will check all
fetched objects. See transfer.fsckObjects for what’s checked.
Defaults to false. If not set, the value of transfer.fsckObjects is
used instead.
fetch.fsck.<msg-id>
fetch.fsck.skipList
fetch.unpackLimit
If the number of objects fetched over the Git native
transfer is below this limit, then the objects will be unpacked into loose
object files. However if the number of received objects equals or exceeds this
limit then the received pack will be stored as a pack, after adding any
missing delta bases. Storing the pack from a push can make the push operation
complete faster, especially on slow filesystems. If not set, the value of
transfer.unpackLimit is used instead.
fetch.prune
If true, fetch will automatically behave as if the
--prune option was given on the command line. See also
remote.<name>.prune and the PRUNING section of
git-fetch(1).
fetch.pruneTags
If true, fetch will automatically behave as if the
refs/tags/*:refs/tags/* refspec was provided when pruning, if not set
already. This allows for setting both this option and
fetch.prune to
maintain a 1=1 mapping to upstream refs. See also
remote.<name>.pruneTags and the PRUNING section of
git-fetch(1).
fetch.output
Control how ref update status is printed. Valid values
are
full and
compact. Default value is
full. See section
OUTPUT in
git-fetch(1) for detail.
fetch.negotiationAlgorithm
Control how information about the commits in the local
repository is sent when negotiating the contents of the packfile to be sent by
the server. Set to "skipping" to use an algorithm that skips commits
in an effort to converge faster, but may result in a larger-than-necessary
packfile; or set to "noop" to not send any information at all, which
will almost certainly result in a larger-than-necessary packfile, but will
skip the negotiation step. The default is "default" which instructs
Git to use the default algorithm that never skips commits (unless the server
has acknowledged it or one of its descendants). If
feature.experimental
is enabled, then this setting defaults to "skipping". Unknown values
will cause
git fetch to error out.
See also the --negotiate-only and --negotiation-tip
options to git-fetch(1).
fetch.showForcedUpdates
fetch.parallel
Specifies the maximal number of fetch operations to be
run in parallel at a time (submodules, or remotes when the
--multiple
option of
git-fetch(1) is in effect).
A value of 0 will give some reasonable default. If unset, it
defaults to 1.
For submodules, this setting can be overridden using the
submodule.fetchJobs config setting.
fetch.writeCommitGraph
Set to true to write a commit-graph after every git
fetch command that downloads a pack-file from a remote. Using the
--split option, most executions will create a very small commit-graph
file on top of the existing commit-graph file(s). Occasionally, these files
will merge and the write may take longer. Having an updated commit-graph file
helps performance of many Git commands, including git merge-base,
git push -f, and git log --graph. Defaults to false.
format.attach
Enable multipart/mixed attachments as the default for
format-patch. The value can also be a double quoted string which will
enable attachments as the default and set the value as the boundary. See the
--attach option in
git-format-patch(1).
format.from
Provides the default value for the --from option
to format-patch. Accepts a boolean value, or a name and email address. If
false, format-patch defaults to --no-from, using commit authors
directly in the "From:" field of patch mails. If true, format-patch
defaults to --from, using your committer identity in the
"From:" field of patch mails and including a "From:" field
in the body of the patch mail if different. If set to a non-boolean value,
format-patch uses that value instead of your committer identity. Defaults to
false.
format.numbered
A boolean which can enable or disable sequence numbers in
patch subjects. It defaults to "auto" which enables it only if there
is more than one patch. It can be enabled or disabled for all messages by
setting it to "true" or "false". See --numbered option in
git-format-patch(1).
format.headers
Additional email headers to include in a patch to be
submitted by mail. See
git-format-patch(1).
format.to, format.cc
Additional recipients to include in a patch to be
submitted by mail. See the --to and --cc options in
git-format-patch(1).
format.subjectPrefix
The default for format-patch is to output files with the
[PATCH] subject prefix. Use this variable to change that prefix.
format.coverFromDescription
The default mode for format-patch to determine which
parts of the cover letter will be populated using the branch’s
description. See the
--cover-from-description option in
git-format-patch(1).
format.signature
The default for format-patch is to output a signature
containing the Git version number. Use this variable to change that default.
Set this variable to the empty string ("") to suppress signature
generation.
format.signatureFile
Works just like format.signature except the contents of
the file specified by this variable will be used as the signature.
format.suffix
The default for format-patch is to output files with the
suffix .patch. Use this variable to change that suffix (make sure to
include the dot if you want it).
format.encodeEmailHeaders
Encode email headers that have non-ASCII characters with
"Q-encoding" (described in RFC 2047) for email transmission.
Defaults to true.
format.pretty
format.thread
The default threading style for git format-patch.
Can be a boolean value, or shallow or deep. shallow
threading makes every mail a reply to the head of the series, where the head
is chosen from the cover letter, the --in-reply-to, and the first patch
mail, in this order. deep threading makes every mail a reply to the
previous one. A true boolean value is the same as shallow, and a false
value disables threading.
format.signOff
A boolean value which lets you enable the
-s/--signoff option of format-patch by default. Note: Adding the
Signed-off-by trailer to a patch should be a conscious act and means
that you certify you have the rights to submit this work under the same open
source license. Please see the SubmittingPatches document for further
discussion.
format.coverLetter
A boolean that controls whether to generate a
cover-letter when format-patch is invoked, but in addition can be set to
"auto", to generate a cover-letter only when there’s more
than one patch. Default is false.
format.outputDirectory
Set a custom directory to store the resulting files
instead of the current working directory. All directory components will be
created.
format.filenameMaxLength
The maximum length of the output filenames generated by
the format-patch command; defaults to 64. Can be overridden by the
--filename-max-length=<n> command line option.
format.useAutoBase
A boolean value which lets you enable the
--base=auto option of format-patch by default. Can also be set to
"whenAble" to allow enabling --base=auto if a suitable base
is available, but to skip adding base info otherwise without the format
dying.
format.notes
Provides the default value for the
--notes option
to format-patch. Accepts a boolean value, or a ref which specifies where to
get notes. If false, format-patch defaults to
--no-notes. If true,
format-patch defaults to
--notes. If set to a non-boolean value,
format-patch defaults to
--notes=<ref>, where
ref is the
non-boolean value. Defaults to false.
If one wishes to use the ref ref/notes/true, please use
that literal instead.
This configuration can be specified multiple times in order to
allow multiple notes refs to be included. In that case, it will behave
similarly to multiple --[no-]notes[=] options passed in. That is, a
value of true will show the default notes, a value of
<ref> will also show notes from that notes ref and a value of
false will negate previous configurations and not show notes.
For example,
[format]
notes = true
notes = foo
notes = false
notes = bar
will only show notes from refs/notes/bar.
filter.<driver>.clean
The command which is used to convert the content of a
worktree file to a blob upon checkin. See
gitattributes(5) for
details.
filter.<driver>.smudge
The command which is used to convert the content of a
blob object to a worktree file upon checkout. See
gitattributes(5) for
details.
fsck.<msg-id>
During fsck git may find issues with legacy data which
wouldn’t be generated by current versions of git, and which
wouldn’t be sent over the wire if
transfer.fsckObjects was set.
This feature is intended to support working with legacy repositories
containing such data.
Setting fsck.<msg-id> will be picked up by
git-fsck(1), but to accept pushes of such data set
receive.fsck.<msg-id> instead, or to clone or fetch it set
fetch.fsck.<msg-id>.
The rest of the documentation discusses fsck.* for brevity,
but the same applies for the corresponding receive.fsck.* and
fetch.<msg-id>.*. variables.
Unlike variables like color.ui and core.editor the
receive.fsck.<msg-id> and fetch.fsck.<msg-id>
variables will not fall back on the fsck.<msg-id> configuration
if they aren’t set. To uniformly configure the same fsck settings in
different circumstances all three of them they must all set to the same
values.
When fsck.<msg-id> is set, errors can be switched to
warnings and vice versa by configuring the fsck.<msg-id>
setting where the <msg-id> is the fsck message ID and the value
is one of error, warn or ignore. For convenience, fsck
prefixes the error/warning with the message ID, e.g. "missingEmail:
invalid author/committer line - missing email" means that setting
fsck.missingEmail = ignore will hide that issue.
In general, it is better to enumerate existing objects with
problems with fsck.skipList, instead of listing the kind of breakages
these problematic objects share to be ignored, as doing the latter will
allow new instances of the same breakages go unnoticed.
Setting an unknown fsck.<msg-id> value will cause
fsck to die, but doing the same for receive.fsck.<msg-id> and
fetch.fsck.<msg-id> will only cause git to warn.
fsck.skipList
The path to a list of object names (i.e. one
unabbreviated SHA-1 per line) that are known to be broken in a non-fatal way
and should be ignored. On versions of Git 2.20 and later comments (
#),
empty lines, and any leading and trailing whitespace is ignored. Everything
but a SHA-1 per line will error out on older versions.
This feature is useful when an established project should be
accepted despite early commits containing errors that can be safely ignored
such as invalid committer email addresses. Note: corrupt objects cannot be
skipped with this setting.
Like fsck.<msg-id> this variable has corresponding
receive.fsck.skipList and fetch.fsck.skipList variants.
Unlike variables like color.ui and core.editor the
receive.fsck.skipList and fetch.fsck.skipList variables will
not fall back on the fsck.skipList configuration if they
aren’t set. To uniformly configure the same fsck settings in
different circumstances all three of them they must all set to the same
values.
Older versions of Git (before 2.20) documented that the object
names list should be sorted. This was never a requirement, the object names
could appear in any order, but when reading the list we tracked whether the
list was sorted for the purposes of an internal binary search
implementation, which could save itself some work with an already sorted
list. Unless you had a humongous list there was no reason to go out of your
way to pre-sort the list. After Git version 2.20 a hash implementation is
used instead, so there’s now no reason to pre-sort the list.
gc.aggressiveDepth
The depth parameter used in the delta compression
algorithm used by
git gc --aggressive. This defaults to 50, which is
the default for the
--depth option when
--aggressive
isn’t in use.
See the documentation for the --depth option in
git-repack(1) for more details.
gc.aggressiveWindow
The window size parameter used in the delta compression
algorithm used by
git gc --aggressive. This defaults to 250, which is a
much more aggressive window size than the default
--window of 10.
See the documentation for the --window option in
git-repack(1) for more details.
gc.auto
When there are approximately more than this many loose
objects in the repository,
git gc --auto will pack them. Some Porcelain
commands use this command to perform a light-weight garbage collection from
time to time. The default value is 6700.
Setting this to 0 disables not only automatic packing based on the
number of loose objects, but any other heuristic git gc --auto will
otherwise use to determine if there’s work to do, such as
gc.autoPackLimit.
gc.autoPackLimit
When there are more than this many packs that are not
marked with
*.keep file in the repository,
git gc --auto
consolidates them into one larger pack. The default value is 50. Setting this
to 0 disables it. Setting
gc.auto to 0 will also disable this.
See the gc.bigPackThreshold configuration variable below.
When in use, it’ll affect how the auto pack limit works.
gc.autoDetach
Make git gc --auto return immediately and run in
background if the system supports it. Default is true.
gc.bigPackThreshold
If non-zero, all packs larger than this limit are kept
when
git gc is run. This is very similar to
--keep-largest-pack
except that all packs that meet the threshold are kept, not just the largest
pack. Defaults to zero. Common unit suffixes of
k,
m, or
g are supported.
Note that if the number of kept packs is more than
gc.autoPackLimit, this configuration variable is ignored, all packs except
the base pack will be repacked. After this the number of packs should go
below gc.autoPackLimit and gc.bigPackThreshold should be respected
again.
If the amount of memory estimated for git repack to run
smoothly is not available and gc.bigPackThreshold is not set, the
largest pack will also be excluded (this is the equivalent of running git
gc with --keep-largest-pack).
gc.writeCommitGraph
If true, then gc will rewrite the commit-graph file when
git-gc(1) is run. When using
git gc --auto the commit-graph will
be updated if housekeeping is required. Default is true. See
git-commit-graph(1) for details.
gc.logExpiry
If the file gc.log exists, then git gc --auto will
print its content and exit with status zero instead of running unless that
file is more than gc.logExpiry old. Default is "1.day". See
gc.pruneExpire for more ways to specify its value.
gc.packRefs
Running git pack-refs in a repository renders it
unclonable by Git versions prior to 1.5.1.2 over dumb transports such as HTTP.
This variable determines whether git gc runs git pack-refs. This
can be set to notbare to enable it within all non-bare repos or it can
be set to a boolean value. The default is true.
gc.pruneExpire
When
git gc is run, it will call
prune --expire
2.weeks.ago. Override the grace period with this config variable. The
value "now" may be used to disable this grace period and always
prune unreachable objects immediately, or "never" may be used to
suppress pruning. This feature helps prevent corruption when
git gc
runs concurrently with another process writing to the repository; see the
"NOTES" section of
git-gc(1).
gc.worktreePruneExpire
When git gc is run, it calls git worktree prune
--expire 3.months.ago. This config variable can be used to set a different
grace period. The value "now" may be used to disable the grace
period and prune $GIT_DIR/worktrees immediately, or "never"
may be used to suppress pruning.
gc.reflogExpire, gc.<pattern>.reflogExpire
git reflog expire removes reflog entries older
than this time; defaults to 90 days. The value "now" expires all
entries immediately, and "never" suppresses expiration altogether.
With "<pattern>" (e.g. "refs/stash") in the middle
the setting applies only to the refs that match the <pattern>.
gc.reflogExpireUnreachable,
gc.<pattern>.reflogExpireUnreachable
git reflog expire removes reflog entries older
than this time and are not reachable from the current tip; defaults to 30
days. The value "now" expires all entries immediately, and
"never" suppresses expiration altogether. With
"<pattern>" (e.g. "refs/stash") in the middle, the
setting applies only to the refs that match the <pattern>.
These types of entries are generally created as a result of using
git commit --amend or git rebase and are the commits prior to
the amend or rebase occurring. Since these changes are not part of the
current project most users will want to expire them sooner, which is why the
default is more aggressive than gc.reflogExpire.
gc.rerereResolved
Records of conflicted merge you resolved earlier are kept
for this many days when
git rerere gc is run. You can also use more
human-readable "1.month.ago", etc. The default is 60 days. See
git-rerere(1).
gc.rerereUnresolved
Records of conflicted merge you have not resolved are
kept for this many days when
git rerere gc is run. You can also use
more human-readable "1.month.ago", etc. The default is 15 days. See
git-rerere(1).
gitcvs.commitMsgAnnotation
Append this string to each commit message. Set to empty
string to disable this feature. Defaults to "via git-CVS
emulator".
gitcvs.enabled
Whether the CVS server interface is enabled for this
repository. See
git-cvsserver(1).
gitcvs.logFile
Path to a log file where the CVS server interface well...
logs various stuff. See
git-cvsserver(1).
gitcvs.usecrlfattr
If true, the server will look up the end-of-line
conversion attributes for files to determine the
-k modes to use. If
the attributes force Git to treat a file as text, the
-k mode will be
left blank so CVS clients will treat it as text. If they suppress text
conversion, the file will be set with
-kb mode, which suppresses any
newline munging the client might otherwise do. If the attributes do not allow
the file type to be determined, then
gitcvs.allBinary is used. See
gitattributes(5).
gitcvs.allBinary
This is used if gitcvs.usecrlfattr does not
resolve the correct -kb mode to use. If true, all unresolved files are
sent to the client in mode -kb. This causes the client to treat them as
binary files, which suppresses any newline munging it otherwise might do.
Alternatively, if it is set to "guess", then the contents of the
file are examined to decide if it is binary, similar to
core.autocrlf.
gitcvs.dbName
Database used by git-cvsserver to cache revision
information derived from the Git repository. The exact meaning depends on the
used database driver, for SQLite (which is the default driver) this is a
filename. Supports variable substitution (see
git-cvsserver(1) for
details). May not contain semicolons (
;). Default:
%Ggitcvs.%m.sqlite
gitcvs.dbDriver
Used Perl DBI driver. You can specify any available
driver for this here, but it might not work. git-cvsserver is tested with
DBD::SQLite, reported to work with
DBD::Pg, and reported
not to work with
DBD::mysql. Experimental feature. May not
contain double colons (
:). Default:
SQLite. See
git-cvsserver(1).
gitcvs.dbUser, gitcvs.dbPass
Database user and password. Only useful if setting
gitcvs.dbDriver, since SQLite has no concept of database users and/or
passwords.
gitcvs.dbUser supports variable substitution (see
git-cvsserver(1) for details).
gitcvs.dbTableNamePrefix
Database table name prefix. Prepended to the names of any
database tables used, allowing a single database to be used for several
repositories. Supports variable substitution (see
git-cvsserver(1) for
details). Any non-alphabetic characters will be replaced with
underscores.
All gitcvs variables except for gitcvs.usecrlfattr and
gitcvs.allBinary can also be specified as
gitcvs.<access_method>.<varname> (where
access_method is one of "ext" and "pserver") to
make them apply only for the given access method.
gitweb.category, gitweb.description, gitweb.owner, gitweb.url
gitweb.avatar, gitweb.blame, gitweb.grep, gitweb.highlight,
gitweb.patches, gitweb.pickaxe, gitweb.remote_heads, gitweb.showSizes,
gitweb.snapshot
grep.lineNumber
If set to true, enable -n option by default.
grep.column
If set to true, enable the --column option by
default.
grep.patternType
Set the default matching behavior. Using a value of
basic, extended, fixed, or perl will enable the
--basic-regexp, --extended-regexp, --fixed-strings, or
--perl-regexp option accordingly, while the value default will
use the grep.extendedRegexp option to choose between basic and
extended.
grep.extendedRegexp
If set to true, enable --extended-regexp option by
default. This option is ignored when the grep.patternType option is set
to a value other than default.
grep.threads
Number of grep worker threads to use. See
grep.threads in
git-grep(1) for more information.
grep.fallbackToNoIndex
If set to true, fall back to git grep --no-index if git
grep is executed outside of a git repository. Defaults to false.
gpg.program
Use this custom program instead of "gpg"
found on $PATH when making or verifying a PGP signature. The program
must support the same command-line interface as GPG, namely, to verify a
detached signature, "gpg --verify $signature - <$file" is
run, and the program is expected to signal a good signature by exiting with
code 0, and to generate an ASCII-armored detached signature, the standard
input of "gpg -bsau $key" is fed with the contents to be
signed, and the program is expected to send the result to its standard
output.
gpg.format
Specifies which key format to use when signing with
--gpg-sign. Default is "openpgp". Other possible values are
"x509", "ssh".
gpg.<format>.program
Use this to customize the program used for the signing
format you chose. (see gpg.program and gpg.format)
gpg.program can still be used as a legacy synonym for
gpg.openpgp.program. The default value for gpg.x509.program is
"gpgsm" and gpg.ssh.program is "ssh-keygen".
gpg.minTrustLevel
Specifies a minimum trust level for signature
verification. If this option is unset, then signature verification for merge
operations require a key with at least
marginal trust. Other operations
that perform signature verification require a key with at least
undefined trust. Setting this option overrides the required trust-level
for all operations. Supported values, in increasing order of significance:
•undefined
•never
•marginal
•fully
•ultimate
gpg.ssh.defaultKeyCommand
This command that will be run when user.signingkey is not
set and a ssh signature is requested. On successful exit a valid ssh public
key is expected in the first line of its output. To automatically use the
first available key from your ssh-agent set this to "ssh-add
-L".
gpg.ssh.allowedSignersFile
A file containing ssh public keys which you are willing
to trust. The file consists of one or more lines of principals followed by an
ssh public key. e.g.:
user1@example.com,user2@example.com ssh-rsa
AAAAX1... See
ssh-keygen(1) "ALLOWED SIGNERS" for details. The
principal is only used to identify the key and is available when verifying a
signature.
SSH has no concept of trust levels like gpg does. To be able to
differentiate between valid signatures and trusted signatures the trust
level of a signature verification is set to fully when the public key
is present in the allowedSignersFile. Otherwise the trust level is
undefined and git verify-commit/tag will fail.
This file can be set to a location outside of the repository and
every developer maintains their own trust store. A central repository server
could generate this file automatically from ssh keys with push access to
verify the code against. In a corporate setting this file is probably
generated at a global location from automation that already handles
developer ssh keys.
A repository that only allows signed commits can store the file in
the repository itself using a path relative to the top-level of the working
tree. This way only committers with an already valid key can add or change
keys in the keyring.
Since OpensSSH 8.8 this file allows specifying a key lifetime
using valid-after & valid-before options. Git will mark signatures as
valid if the signing key was valid at the time of the signatures creation.
This allows users to change a signing key without invalidating all
previously made signatures.
Using a SSH CA key with the cert-authority option (see
ssh-keygen(1) "CERTIFICATES") is also valid.
gpg.ssh.revocationFile
Either a SSH KRL or a list of revoked public keys
(without the principal prefix). See
ssh-keygen(1) for details. If a public key
is found in this file then it will always be treated as having trust level
"never" and signatures will show as invalid.
gui.commitMsgWidth
Defines how wide the commit message window is in the
git-gui(1). "75" is the default.
gui.diffContext
Specifies how many context lines should be used in calls
to diff made by the
git-gui(1). The default is "5".
gui.displayUntracked
Determines if
git-gui(1) shows untracked files in
the file list. The default is "true".
gui.encoding
Specifies the default character encoding to use for
displaying of file contents in
git-gui(1) and
gitk(1). It can be
overridden by setting the
encoding attribute for relevant files (see
gitattributes(5)). If this option is not set, the tools default to the
locale encoding.
gui.matchTrackingBranch
Determines if new branches created with
git-gui(1)
should default to tracking remote branches with matching names or not.
Default: "false".
gui.newBranchTemplate
Is used as suggested name when creating new branches
using the
git-gui(1).
gui.pruneDuringFetch
"true" if
git-gui(1) should prune
remote-tracking branches when performing a fetch. The default value is
"false".
gui.trustmtime
Determines if
git-gui(1) should trust the file
modification timestamp or not. By default the timestamps are not
trusted.
gui.spellingDictionary
Specifies the dictionary used for spell checking commit
messages in the
git-gui(1). When set to "none" spell checking
is turned off.
gui.fastCopyBlame
If true, git gui blame uses -C instead of
-C -C for original location detection. It makes blame significantly
faster on huge repositories at the expense of less thorough copy
detection.
gui.copyBlameThreshold
Specifies the threshold to use in
git gui blame
original location detection, measured in alphanumeric characters. See the
git-blame(1) manual for more information on copy detection.
gui.blamehistoryctx
Specifies the radius of history context in days to show
in
gitk(1) for the selected commit, when the
Show History
Context menu item is invoked from
git gui blame. If this variable
is set to zero, the whole history is shown.
guitool.<name>.cmd
Specifies the shell command line to execute when the
corresponding item of the
git-gui(1) Tools menu is invoked. This
option is mandatory for every tool. The command is executed from the root of
the working directory, and in the environment it receives the name of the tool
as
GIT_GUITOOL, the name of the currently selected file as
FILENAME, and the name of the current branch as
CUR_BRANCH (if
the head is detached,
CUR_BRANCH is empty).
guitool.<name>.needsFile
Run the tool only if a diff is selected in the GUI. It
guarantees that FILENAME is not empty.
guitool.<name>.noConsole
Run the command silently, without creating a window to
display its output.
guitool.<name>.noRescan
Don’t rescan the working directory for changes
after the tool finishes execution.
guitool.<name>.confirm
Show a confirmation dialog before actually running the
tool.
guitool.<name>.argPrompt
Request a string argument from the user, and pass it to
the tool through the ARGS environment variable. Since requesting an
argument implies confirmation, the confirm option has no effect if this
is enabled. If the option is set to true, yes, or 1, the
dialog uses a built-in generic prompt; otherwise the exact value of the
variable is used.
guitool.<name>.revPrompt
Request a single valid revision from the user, and set
the REVISION environment variable. In other aspects this option is
similar to argPrompt, and can be used together with it.
guitool.<name>.revUnmerged
Show only unmerged branches in the revPrompt
subdialog. This is useful for tools similar to merge or rebase, but not for
things like checkout or reset.
guitool.<name>.title
Specifies the title to use for the prompt dialog. The
default is the tool name.
guitool.<name>.prompt
Specifies the general prompt string to display at the top
of the dialog, before subsections for argPrompt and revPrompt.
The default value includes the actual command.
help.browser
Specify the browser that will be used to display help in
the
web format. See
git-help(1).
help.format
Override the default help format used by
git-help(1). Values
man,
info,
web and
html
are supported.
man is the default.
web and
html are the
same.
help.autoCorrect
If git detects typos and can identify exactly one valid
command similar to the error, git will try to suggest the correct command or
even run the suggestion automatically. Possible config values are:
•0 (default): show the suggested command.
•positive number: run the suggested command after
specified deciseconds (0.1 sec).
•"immediate": run the suggested command
immediately.
•"prompt": show the suggestion and
prompt for confirmation to run the command.
•"never": don’t run or show any
suggested command.
help.htmlPath
Specify the path where the HTML documentation resides.
File system paths and URLs are supported. HTML pages will be prefixed with
this path when help is displayed in the web format. This defaults to
the documentation path of your Git installation.
http.proxy
Override the HTTP proxy, normally configured using the
http_proxy,
https_proxy, and
all_proxy environment
variables (see
curl(1)). In addition to the syntax understood by curl,
it is possible to specify a proxy string with a user name but no password, in
which case git will attempt to acquire one in the same way it does for other
credentials. See
gitcredentials(7) for more information. The syntax
thus is
[protocol://][user[:password]@]proxyhost[:port]. This can be
overridden on a per-remote basis; see remote.<name>.proxy
http.proxyAuthMethod
Set the method with which to authenticate against the
HTTP proxy. This only takes effect if the configured proxy string contains a
user name part (i.e. is of the form
user@host or
user@host:port). This can be overridden on a per-remote basis; see
remote.<name>.proxyAuthMethod. Both can be overridden by the
GIT_HTTP_PROXY_AUTHMETHOD environment variable. Possible values are:
•anyauth - Automatically pick a suitable
authentication method. It is assumed that the proxy answers an unauthenticated
request with a 407 status code and one or more Proxy-authenticate headers with
supported authentication methods. This is the default.
•basic - HTTP Basic authentication
•digest - HTTP Digest authentication; this
prevents the password from being transmitted to the proxy in clear text
•
negotiate - GSS-Negotiate authentication
(compare the --negotiate option of
curl(1))
•
ntlm - NTLM authentication (compare the
--ntlm option of
curl(1))
http.proxySSLCert
The pathname of a file that stores a client certificate
to use to authenticate with an HTTPS proxy. Can be overridden by the
GIT_PROXY_SSL_CERT environment variable.
http.proxySSLKey
The pathname of a file that stores a private key to use
to authenticate with an HTTPS proxy. Can be overridden by the
GIT_PROXY_SSL_KEY environment variable.
http.proxySSLCertPasswordProtected
Enable Git’s password prompt for the proxy SSL
certificate. Otherwise OpenSSL will prompt the user, possibly many times, if
the certificate or private key is encrypted. Can be overridden by the
GIT_PROXY_SSL_CERT_PASSWORD_PROTECTED environment variable.
http.proxySSLCAInfo
Pathname to the file containing the certificate bundle
that should be used to verify the proxy with when using an HTTPS proxy. Can be
overridden by the GIT_PROXY_SSL_CAINFO environment variable.
http.emptyAuth
Attempt authentication without seeking a username or
password. This can be used to attempt GSS-Negotiate authentication without
specifying a username in the URL, as libcurl normally requires a username for
authentication.
http.delegation
Control GSSAPI credential delegation. The delegation is
disabled by default in libcurl since version 7.21.7. Set parameter to tell the
server what it is allowed to delegate when it comes to user credentials. Used
with GSS/kerberos. Possible values are:
•none - Don’t allow any
delegation.
•policy - Delegates if and only if the
OK-AS-DELEGATE flag is set in the Kerberos service ticket, which is a matter
of realm policy.
•always - Unconditionally allow the server
to delegate.
http.extraHeader
Pass an additional HTTP header when communicating with a
server. If more than one such entry exists, all of them are added as extra
headers. To allow overriding the settings inherited from the system config, an
empty value will reset the extra headers to the empty list.
http.cookieFile
The pathname of a file containing previously stored
cookie lines, which should be used in the Git http session, if they match the
server. The file format of the file to read cookies from should be plain HTTP
headers or the Netscape/Mozilla cookie file format (see
curl(1)). NOTE
that the file specified with http.cookieFile is used only as input unless
http.saveCookies is set.
http.saveCookies
If set, store cookies received during requests to the
file specified by http.cookieFile. Has no effect if http.cookieFile is
unset.
http.version
Use the specified HTTP protocol version when
communicating with a server. If you want to force the default. The available
and default version depend on libcurl. Currently the possible values of this
option are:
•HTTP/2
•HTTP/1.1
http.sslVersion
The SSL version to use when negotiating an SSL
connection, if you want to force the default. The available and default
version depend on whether libcurl was built against NSS or OpenSSL and the
particular configuration of the crypto library in use. Internally this sets
the
CURLOPT_SSL_VERSION option; see the libcurl documentation for more
details on the format of this option and for the ssl version supported.
Currently the possible values of this option are:
•sslv2
•sslv3
•tlsv1
•tlsv1.0
•tlsv1.1
•tlsv1.2
•tlsv1.3
Can be overridden by the GIT_SSL_VERSION environment
variable. To force git to use libcurl’s default ssl version and
ignore any explicit http.sslversion option, set GIT_SSL_VERSION to
the empty string.
http.sslCipherList
A list of SSL ciphers to use when negotiating an SSL
connection. The available ciphers depend on whether libcurl was built against
NSS or OpenSSL and the particular configuration of the crypto library in use.
Internally this sets the
CURLOPT_SSL_CIPHER_LIST option; see the
libcurl documentation for more details on the format of this list.
Can be overridden by the GIT_SSL_CIPHER_LIST environment
variable. To force git to use libcurl’s default cipher list and
ignore any explicit http.sslCipherList option, set
GIT_SSL_CIPHER_LIST to the empty string.
http.sslVerify
Whether to verify the SSL certificate when fetching or
pushing over HTTPS. Defaults to true. Can be overridden by the
GIT_SSL_NO_VERIFY environment variable.
http.sslCert
File containing the SSL certificate when fetching or
pushing over HTTPS. Can be overridden by the GIT_SSL_CERT environment
variable.
http.sslKey
File containing the SSL private key when fetching or
pushing over HTTPS. Can be overridden by the GIT_SSL_KEY environment
variable.
http.sslCertPasswordProtected
Enable Git’s password prompt for the SSL
certificate. Otherwise OpenSSL will prompt the user, possibly many times, if
the certificate or private key is encrypted. Can be overridden by the
GIT_SSL_CERT_PASSWORD_PROTECTED environment variable.
http.sslCAInfo
File containing the certificates to verify the peer with
when fetching or pushing over HTTPS. Can be overridden by the
GIT_SSL_CAINFO environment variable.
http.sslCAPath
Path containing files with the CA certificates to verify
the peer with when fetching or pushing over HTTPS. Can be overridden by the
GIT_SSL_CAPATH environment variable.
http.sslBackend
Name of the SSL backend to use (e.g. "openssl"
or "schannel"). This option is ignored if cURL lacks support for
choosing the SSL backend at runtime.
http.schannelCheckRevoke
Used to enforce or disable certificate revocation checks
in cURL when http.sslBackend is set to "schannel". Defaults to
true if unset. Only necessary to disable this if Git consistently
errors and the message is about checking the revocation status of a
certificate. This option is ignored if cURL lacks support for setting the
relevant SSL option at runtime.
http.schannelUseSSLCAInfo
As of cURL v7.60.0, the Secure Channel backend can use
the certificate bundle provided via http.sslCAInfo, but that would
override the Windows Certificate Store. Since this is not desirable by
default, Git will tell cURL not to use that bundle by default when the
schannel backend was configured via http.sslBackend, unless
http.schannelUseSSLCAInfo overrides this behavior.
http.pinnedpubkey
Public key of the https service. It may either be the
filename of a PEM or DER encoded public key file or a string starting with
sha256// followed by the base64 encoded sha256 hash of the public key.
See also libcurl CURLOPT_PINNEDPUBLICKEY. git will exit with an error
if this option is set but not supported by cURL.
http.sslTry
Attempt to use AUTH SSL/TLS and encrypted data transfers
when connecting via regular FTP protocol. This might be needed if the FTP
server requires it for security reasons or you wish to connect securely
whenever remote FTP server supports it. Default is false since it might
trigger certificate verification errors on misconfigured servers.
http.maxRequests
How many HTTP requests to launch in parallel. Can be
overridden by the GIT_HTTP_MAX_REQUESTS environment variable. Default
is 5.
http.minSessions
The number of curl sessions (counted across slots) to be
kept across requests. They will not be ended with curl_easy_cleanup() until
http_cleanup() is invoked. If USE_CURL_MULTI is not defined, this value will
be capped at 1. Defaults to 1.
http.postBuffer
Maximum size in bytes of the buffer used by smart HTTP
transports when POSTing data to the remote system. For requests larger than
this buffer size, HTTP/1.1 and Transfer-Encoding: chunked is used to avoid
creating a massive pack file locally. Default is 1 MiB, which is sufficient
for most requests.
Note that raising this limit is only effective for disabling
chunked transfer encoding and therefore should be used only where the remote
server or a proxy only supports HTTP/1.0 or is noncompliant with the HTTP
standard. Raising this is not, in general, an effective solution for most
push problems, but can increase memory consumption significantly since the
entire buffer is allocated even for small pushes.
http.lowSpeedLimit, http.lowSpeedTime
If the HTTP transfer speed is less than
http.lowSpeedLimit for longer than http.lowSpeedTime seconds,
the transfer is aborted. Can be overridden by the
GIT_HTTP_LOW_SPEED_LIMIT and GIT_HTTP_LOW_SPEED_TIME environment
variables.
http.noEPSV
A boolean which disables using of EPSV ftp command by
curl. This can helpful with some "poor" ftp servers which
don’t support EPSV mode. Can be overridden by the
GIT_CURL_FTP_NO_EPSV environment variable. Default is false (curl will
use EPSV).
http.userAgent
The HTTP USER_AGENT string presented to an HTTP server.
The default value represents the version of the client Git such as git/1.7.1.
This option allows you to override this value to a more common value such as
Mozilla/4.0. This may be necessary, for instance, if connecting through a
firewall that restricts HTTP connections to a set of common USER_AGENT strings
(but not including those like git/1.7.1). Can be overridden by the
GIT_HTTP_USER_AGENT environment variable.
http.followRedirects
Whether git should follow HTTP redirects. If set to
true, git will transparently follow any redirect issued by a server it
encounters. If set to false, git will treat all redirects as errors. If
set to initial, git will follow redirects only for the initial request
to a remote, but not for subsequent follow-up HTTP requests. Since git uses
the redirected URL as the base for the follow-up requests, this is generally
sufficient. The default is initial.
http.<url>.*
Any of the http.* options above can be applied
selectively to some URLs. For a config key to match a URL, each element of the
config key is compared to that of the URL, in the following order:
1.Scheme (e.g.,
https in
https://example.com/). This field must match exactly between the config
key and the URL.
3.Port number (e.g.,
8080 in
http://example.com:8080/). This field must match exactly between the
config key and the URL. Omitted port numbers are automatically converted to
the correct default for the scheme before matching.
4.Path (e.g.,
repo.git in
https://example.com/repo.git). The path field of the config key must
match the path field of the URL either exactly or as a prefix of
slash-delimited path elements. This means a config key with path
foo/
matches URL path
foo/bar. A prefix can only match on a slash (
/)
boundary. Longer matches take precedence (so a config key with path
foo/bar is a better match to URL path
foo/bar than a config key
with just path
foo/).
5.User name (e.g.,
user in
https://user@example.com/repo.git). If the config key has a user name
it must match the user name in the URL exactly. If the config key does not
have a user name, that config key will match a URL with any user name
(including none), but at a lower precedence than a config key with a user
name.
The list above is ordered by decreasing precedence; a URL that
matches a config key’s path is preferred to one that matches its user
name. For example, if the URL is https://user@example.com/foo/bar a
config key match of https://example.com/foo will be preferred over a
config key match of https://user@example.com.
All URLs are normalized before attempting any matching (the
password part, if embedded in the URL, is always ignored for matching
purposes) so that equivalent URLs that are simply spelled differently will
match properly. Environment variable settings always override any matches.
The URLs that are matched against are those given directly to Git commands.
This means any URLs visited as a result of a redirection do not participate
in matching.
i18n.commitEncoding
Character encoding the commit messages are stored in; Git
itself does not care per se, but this information is necessary e.g. when
importing commits from emails or in the gitk graphical history browser (and
possibly at other places in the future or in other porcelains). See e.g.
git-mailinfo(1). Defaults to
utf-8.
i18n.logOutputEncoding
Character encoding the commit messages are converted to
when running git log and friends.
imap.folder
The folder to drop the mails into, which is typically the
Drafts folder. For example: "INBOX.Drafts", "INBOX/Drafts"
or "[Gmail]/Drafts". Required.
imap.tunnel
Command used to setup a tunnel to the IMAP server through
which commands will be piped instead of using a direct network connection to
the server. Required when imap.host is not set.
imap.host
A URL identifying the server. Use an
imap://
prefix for non-secure connections and an
imaps:// prefix for secure
connections. Ignored when imap.tunnel is set, but required otherwise.
imap.user
The username to use when logging in to the server.
imap.pass
The password to use when logging in to the server.
imap.port
An integer port number to connect to on the server.
Defaults to 143 for
imap:// hosts and 993 for
imaps:// hosts. Ignored when
imap.tunnel is set.
imap.sslverify
A boolean to enable/disable verification of the server
certificate used by the SSL/TLS connection. Default is true. Ignored
when imap.tunnel is set.
imap.preformattedHTML
A boolean to enable/disable the use of html encoding when
sending a patch. An html encoded patch will be bracketed with <pre> and
have a content type of text/html. Ironically, enabling this option causes
Thunderbird to send the patch as a plain/text, format=fixed email. Default is
false.
imap.authMethod
Specify authenticate method for authentication with IMAP
server. If Git was built with the NO_CURL option, or if your curl version is
older than 7.34.0, or if you’re running git-imap-send with the
--no-curl option, the only supported method is CRAM-MD5. If this
is not set then git imap-send uses the basic IMAP plaintext LOGIN
command.
index.recordEndOfIndexEntries
Specifies whether the index file should include an
"End Of Index Entry" section. This reduces index load time on
multiprocessor machines but produces a message "ignoring EOIE
extension" when reading the index using Git versions before 2.20.
Defaults to true if index.threads has been explicitly enabled,
false otherwise.
index.recordOffsetTable
Specifies whether the index file should include an
"Index Entry Offset Table" section. This reduces index load time on
multiprocessor machines but produces a message "ignoring IEOT
extension" when reading the index using Git versions before 2.20.
Defaults to true if index.threads has been explicitly enabled,
false otherwise.
index.sparse
When enabled, write the index using sparse-directory
entries. This has no effect unless core.sparseCheckout and
core.sparseCheckoutCone are both enabled. Defaults to
false.
index.threads
Specifies the number of threads to spawn when loading the
index. This is meant to reduce index load time on multiprocessor machines.
Specifying 0 or true will cause Git to auto-detect the number of
CPU’s and set the number of threads accordingly. Specifying 1 or
false will disable multithreading. Defaults to true.
index.version
Specify the version with which new index files should be
initialized. This does not affect existing repositories. If
feature.manyFiles is enabled, then the default is 4.
init.templateDir
Specify the directory from which templates will be
copied. (See the "TEMPLATE DIRECTORY" section of
git-init(1).)
init.defaultBranch
Allows overriding the default branch name e.g. when
initializing a new repository.
instaweb.browser
Specify the program that will be used to browse your
working repository in gitweb. See
git-instaweb(1).
instaweb.httpd
The HTTP daemon command-line to start gitweb on your
working repository. See
git-instaweb(1).
instaweb.local
If true the web server started by
git-instaweb(1)
will be bound to the local IP (127.0.0.1).
instaweb.modulePath
The default module path for
git-instaweb(1) to use
instead of /usr/lib/apache2/modules. Only used if httpd is Apache.
instaweb.port
interactive.singleKey
In interactive commands, allow the user to provide
one-letter input with a single key (i.e., without hitting enter). Currently
this is used by the
--patch mode of
git-add(1),
git-checkout(1),
git-restore(1),
git-commit(1),
git-reset(1), and
git-stash(1). Note that this setting is
silently ignored if portable keystroke input is not available; requires the
Perl module Term::ReadKey.
interactive.diffFilter
When an interactive command (such as git add
--patch) shows a colorized diff, git will pipe the diff through the shell
command defined by this configuration variable. The command may mark up the
diff further for human consumption, provided that it retains a one-to-one
correspondence with the lines in the original diff. Defaults to disabled (no
filtering).
log.abbrevCommit
log.date
Set the default date-time mode for the
log
command. Setting a value for log.date is similar to using
git log's
--date option. See
git-log(1) for details.
log.decorate
Print out the ref names of any commits that are shown by
the log command. If short is specified, the ref name prefixes
refs/heads/, refs/tags/ and refs/remotes/ will not be
printed. If full is specified, the full ref name (including prefix)
will be printed. If auto is specified, then if the output is going to a
terminal, the ref names are shown as if short were given, otherwise no
ref names are shown. This is the same as the --decorate option of the
git log.
log.excludeDecoration
Exclude the specified patterns from the log decorations.
This is similar to the --decorate-refs-exclude command-line option, but
the config option can be overridden by the --decorate-refs
option.
log.diffMerges
Set default diff format to be used for merge commits. See
--diff-merges in
git-log(1) for details. Defaults to
separate.
log.follow
If true, git log will act as if the
--follow option was used when a single <path> is given. This has
the same limitations as --follow, i.e. it cannot be used to follow
multiple files and does not work well on non-linear history.
log.graphColors
A list of colors, separated by commas, that can be used
to draw history lines in git log --graph.
log.showRoot
If true, the initial commit will be shown as a big
creation event. This is equivalent to a diff against an empty tree. Tools like
git-log(1) or
git-whatchanged(1), which normally hide the root
commit will now show it. True by default.
log.showSignature
log.mailmap
lsrefs.unborn
May be "advertise" (the default),
"allow", or "ignore". If "advertise", the server
will respond to the client sending "unborn" (as described in
protocol-v2.txt) and will advertise support for this feature during the
protocol v2 capability advertisement. "allow" is the same as
"advertise" except that the server will not advertise support for
this feature; this is useful for load-balanced servers that cannot be updated
atomically (for example), since the administrator could configure
"allow", then after a delay, configure "advertise".
mailinfo.scissors
If true, makes
git-mailinfo(1) (and therefore
git-am(1)) act by default as if the --scissors option was provided on
the command-line. When active, this features removes everything from the
message body before a scissors line (i.e. consisting mainly of
">8", "8<" and "-").
mailmap.file
The location of an augmenting mailmap file. The default
mailmap, located in the root of the repository, is loaded first, then the
mailmap file pointed to by this variable. The location of the mailmap file may
be in a repository subdirectory, or somewhere outside of the repository
itself. See
git-shortlog(1) and
git-blame(1).
mailmap.blob
Like mailmap.file, but consider the value as a
reference to a blob in the repository. If both mailmap.file and
mailmap.blob are given, both are parsed, with entries from
mailmap.file taking precedence. In a bare repository, this defaults to
HEAD:.mailmap. In a non-bare repository, it defaults to empty.
maintenance.auto
This boolean config option controls whether some commands
run git maintenance run --auto after doing their normal work. Defaults
to true.
maintenance.strategy
This string config option provides a way to specify one
of a few recommended schedules for background maintenance. This only affects
which tasks are run during
git maintenance run --schedule=X commands,
provided no
--task=<task> arguments are provided. Further, if a
maintenance.<task>.schedule config value is set, then that value
is used instead of the one provided by
maintenance.strategy. The
possible strategy strings are:
•none: This default setting implies no task
are run at any schedule.
•incremental: This setting optimizes for
performing small maintenance activities that do not delete any data. This does
not schedule the gc task, but runs the prefetch and
commit-graph tasks hourly, the loose-objects and
incremental-repack tasks daily, and the pack-refs task
weekly.
maintenance.<task>.enabled
This boolean config option controls whether the
maintenance task with name <task> is run when no --task
option is specified to git maintenance run. These config values are
ignored if a --task option exists. By default, only
maintenance.gc.enabled is true.
maintenance.<task>.schedule
This config option controls whether or not the given
<task> runs during a git maintenance run
--schedule=<frequency> command. The value must be one of
"hourly", "daily", or "weekly".
maintenance.commit-graph.auto
This integer config option controls how often the
commit-graph task should be run as part of git maintenance run
--auto. If zero, then the commit-graph task will not run with the
--auto option. A negative value will force the task to run every time.
Otherwise, a positive value implies the command should run when the number of
reachable commits that are not in the commit-graph file is at least the value
of maintenance.commit-graph.auto. The default value is 100.
maintenance.loose-objects.auto
This integer config option controls how often the
loose-objects task should be run as part of git maintenance run
--auto. If zero, then the loose-objects task will not run with the
--auto option. A negative value will force the task to run every time.
Otherwise, a positive value implies the command should run when the number of
loose objects is at least the value of maintenance.loose-objects.auto.
The default value is 100.
maintenance.incremental-repack.auto
This integer config option controls how often the
incremental-repack task should be run as part of git maintenance run
--auto. If zero, then the incremental-repack task will not run with
the --auto option. A negative value will force the task to run every
time. Otherwise, a positive value implies the command should run when the
number of pack-files not in the multi-pack-index is at least the value of
maintenance.incremental-repack.auto. The default value is 10.
man.viewer
Specify the programs that may be used to display help in
the
man format. See
git-help(1).
man.<tool>.cmd
Specify the command to invoke the specified man viewer.
The specified command is evaluated in shell with the man page passed as
argument. (See
git-help(1).)
man.<tool>.path
Override the path for the given tool that may be used to
display help in the
man format. See
git-help(1).
merge.conflictStyle
Specify the style in which conflicted hunks are written
out to working tree files upon merge. The default is "merge", which
shows a <<<<<<< conflict marker, changes made by
one side, a ======= marker, changes made by the other side, and then a
>>>>>>> marker. An alternate style,
"diff3", adds a ||||||| marker and the original text before
the ======= marker. The "merge" style tends to produce
smaller conflict regions than diff3, both because of the exclusion of the
original text, and because when a subset of lines match on the two sides they
are just pulled out of the conflict region. Another alternate style,
"zdiff3", is similar to diff3 but removes matching lines on the two
sides from the conflict region when those matching lines appear near either
the beginning or end of a conflict region.
merge.defaultToUpstream
If merge is called without any commit argument, merge the
upstream branches configured for the current branch by using their last
observed values stored in their remote-tracking branches. The values of the
branch.<current branch>.merge that name the branches at the
remote named by branch.<current branch>.remote are consulted, and
then they are mapped via remote.<remote>.fetch to their
corresponding remote-tracking branches, and the tips of these tracking
branches are merged. Defaults to true.
merge.ff
By default, Git does not create an extra merge commit
when merging a commit that is a descendant of the current commit. Instead, the
tip of the current branch is fast-forwarded. When set to false, this
variable tells Git to create an extra merge commit in such a case (equivalent
to giving the --no-ff option from the command line). When set to
only, only such fast-forward merges are allowed (equivalent to giving
the --ff-only option from the command line).
merge.verifySignatures
If true, this is equivalent to the --verify-signatures
command line option. See
git-merge(1) for details.
merge.branchdesc
In addition to branch names, populate the log message
with the branch description text associated with them. Defaults to
false.
merge.log
In addition to branch names, populate the log message
with at most the specified number of one-line descriptions from the actual
commits that are being merged. Defaults to false, and true is a synonym for
20.
merge.suppressDest
By adding a glob that matches the names of integration
branches to this multi-valued configuration variable, the default merge
message computed for merges into these integration branches will omit
"into <branch name>" from its title.
An element with an empty value can be used to clear the list of
globs accumulated from previous configuration entries. When there is no
merge.suppressDest variable defined, the default value of
master is used for backward compatibility.
merge.renameLimit
The number of files to consider in the exhaustive portion
of rename detection during a merge. If not specified, defaults to the value of
diff.renameLimit. If neither merge.renameLimit nor diff.renameLimit are
specified, currently defaults to 7000. This setting has no effect if rename
detection is turned off.
merge.renames
Whether Git detects renames. If set to "false",
rename detection is disabled. If set to "true", basic rename
detection is enabled. Defaults to the value of diff.renames.
merge.directoryRenames
Whether Git detects directory renames, affecting what
happens at merge time to new files added to a directory on one side of history
when that directory was renamed on the other side of history. If
merge.directoryRenames is set to "false", directory rename detection
is disabled, meaning that such new files will be left behind in the old
directory. If set to "true", directory rename detection is enabled,
meaning that such new files will be moved into the new directory. If set to
"conflict", a conflict will be reported for such paths. If
merge.renames is false, merge.directoryRenames is ignored and treated as
false. Defaults to "conflict".
merge.renormalize
Tell Git that canonical representation of files in the
repository has changed over time (e.g. earlier commits record text files with
CRLF line endings, but recent ones use LF line endings). In such a repository,
Git can convert the data recorded in commits to a canonical form before
performing a merge to reduce unnecessary conflicts. For more information, see
section "Merging branches with differing checkin/checkout
attributes" in
gitattributes(5).
merge.stat
Whether to print the diffstat between ORIG_HEAD and the
merge result at the end of the merge. True by default.
merge.autoStash
When set to true, automatically create a temporary stash
entry before the operation begins, and apply it after the operation ends. This
means that you can run merge on a dirty worktree. However, use with care: the
final stash application after a successful merge might result in non-trivial
conflicts. This option can be overridden by the
--no-autostash and
--autostash options of
git-merge(1). Defaults to false.
merge.tool
Controls which merge tool is used by
git-mergetool(1). The list below shows the valid built-in values. Any
other value is treated as a custom merge tool and requires that a
corresponding mergetool.<tool>.cmd variable is defined.
merge.guitool
Controls which merge tool is used by
git-mergetool(1) when the -g/--gui flag is specified. The list below
shows the valid built-in values. Any other value is treated as a custom merge
tool and requires that a corresponding mergetool.<guitool>.cmd variable
is defined.
•araxis
•bc
•bc3
•bc4
•codecompare
•deltawalker
•diffmerge
•diffuse
•ecmerge
•emerge
•examdiff
•guiffy
•gvimdiff
•gvimdiff1
•gvimdiff2
•gvimdiff3
•kdiff3
•meld
•nvimdiff
•nvimdiff1
•nvimdiff2
•nvimdiff3
•opendiff
•p4merge
•smerge
•tkdiff
•tortoisemerge
•vimdiff
•vimdiff1
•vimdiff2
•vimdiff3
•winmerge
•xxdiff
merge.verbosity
Controls the amount of output shown by the recursive
merge strategy. Level 0 outputs nothing except a final error message if
conflicts were detected. Level 1 outputs only conflicts, 2 outputs conflicts
and file changes. Level 5 and above outputs debugging information. The default
is level 2. Can be overridden by the GIT_MERGE_VERBOSITY environment
variable.
merge.<driver>.name
Defines a human-readable name for a custom low-level
merge driver. See
gitattributes(5) for details.
merge.<driver>.driver
Defines the command that implements a custom low-level
merge driver. See
gitattributes(5) for details.
merge.<driver>.recursive
Names a low-level merge driver to be used when performing
an internal merge between common ancestors. See
gitattributes(5) for
details.
mergetool.<tool>.path
Override the path for the given tool. This is useful in
case your tool is not in the PATH.
mergetool.<tool>.cmd
Specify the command to invoke the specified merge tool.
The specified command is evaluated in shell with the following variables
available: BASE is the name of a temporary file containing the common
base of the files to be merged, if available; LOCAL is the name of a
temporary file containing the contents of the file on the current branch;
REMOTE is the name of a temporary file containing the contents of the
file from the branch being merged; MERGED contains the name of the file
to which the merge tool should write the results of a successful merge.
mergetool.<tool>.hideResolved
Allows the user to override the global
mergetool.hideResolved value for a specific tool. See
mergetool.hideResolved for the full description.
mergetool.<tool>.trustExitCode
For a custom merge command, specify whether the exit code
of the merge command can be used to determine whether the merge was
successful. If this is not set to true then the merge target file timestamp is
checked and the merge assumed to have been successful if the file has been
updated, otherwise the user is prompted to indicate the success of the
merge.
mergetool.meld.hasOutput
Older versions of meld do not support the
--output option. Git will attempt to detect whether meld
supports --output by inspecting the output of meld --help.
Configuring mergetool.meld.hasOutput will make Git skip these checks
and use the configured value instead. Setting mergetool.meld.hasOutput
to true tells Git to unconditionally use the --output option,
and false avoids using --output.
mergetool.meld.useAutoMerge
When the --auto-merge is given, meld will merge
all non-conflicting parts automatically, highlight the conflicting parts and
wait for user decision. Setting mergetool.meld.useAutoMerge to
true tells Git to unconditionally use the --auto-merge option
with meld. Setting this value to auto makes git detect whether
--auto-merge is supported and will only use --auto-merge when
available. A value of false avoids using --auto-merge
altogether, and is the default value.
mergetool.hideResolved
During a merge Git will automatically resolve as many
conflicts as possible and write the MERGED file containing conflict
markers around any conflicts that it cannot resolve; LOCAL and
REMOTE normally represent the versions of the file from before
Git’s conflict resolution. This flag causes LOCAL and
REMOTE to be overwriten so that only the unresolved conflicts are
presented to the merge tool. Can be configured per-tool via the
mergetool.<tool>.hideResolved configuration variable. Defaults to
false.
mergetool.keepBackup
After performing a merge, the original file with conflict
markers can be saved as a file with a .orig extension. If this variable
is set to false then this file is not preserved. Defaults to
true (i.e. keep the backup files).
mergetool.keepTemporaries
When invoking a custom merge tool, Git uses a set of
temporary files to pass to the tool. If the tool returns an error and this
variable is set to true, then these temporary files will be preserved,
otherwise they will be removed after the tool has exited. Defaults to
false.
mergetool.writeToTemp
Git writes temporary BASE, LOCAL, and
REMOTE versions of conflicting files in the worktree by default. Git
will attempt to use a temporary directory for these files when set
true. Defaults to false.
mergetool.prompt
Prompt before each invocation of the merge resolution
program.
notes.mergeStrategy
Which merge strategy to choose by default when resolving
notes conflicts. Must be one of
manual,
ours,
theirs,
union, or
cat_sort_uniq. Defaults to
manual. See
"NOTES MERGE STRATEGIES" section of
git-notes(1) for more
information on each strategy.
notes.<name>.mergeStrategy
Which merge strategy to choose when doing a notes merge
into refs/notes/<name>. This overrides the more general
"notes.mergeStrategy". See the "NOTES MERGE STRATEGIES"
section in
git-notes(1) for more information on the available
strategies.
notes.displayRef
The (fully qualified) refname from which to show notes
when showing commit messages. The value of this variable can be set to a glob,
in which case notes from all matching refs will be shown. You may also specify
this configuration variable several times. A warning will be issued for refs
that do not exist, but a glob that does not match any refs is silently
ignored.
This setting can be overridden with the
GIT_NOTES_DISPLAY_REF environment variable, which must be a colon
separated list of refs or globs.
The effective value of "core.notesRef" (possibly
overridden by GIT_NOTES_REF) is also implicitly added to the list of refs to
be displayed.
notes.rewrite.<command>
When rewriting commits with <command> (currently
amend or rebase) and this variable is set to true, Git
automatically copies your notes from the original to the rewritten commit.
Defaults to true, but see "notes.rewriteRef" below.
notes.rewriteMode
When copying notes during a rewrite (see the
"notes.rewrite.<command>" option), determines what to do if
the target commit already has a note. Must be one of
overwrite,
concatenate,
cat_sort_uniq, or
ignore. Defaults to
concatenate.
This setting can be overridden with the
GIT_NOTES_REWRITE_MODE environment variable.
notes.rewriteRef
When copying notes during a rewrite, specifies the (fully
qualified) ref whose notes should be copied. The ref may be a glob, in which
case notes in all matching refs will be copied. You may also specify this
configuration several times.
Does not have a default value; you must configure this variable to
enable note rewriting. Set it to refs/notes/commits to enable
rewriting for the default commit notes.
This setting can be overridden with the
GIT_NOTES_REWRITE_REF environment variable, which must be a colon
separated list of refs or globs.
pack.window
The size of the window used by
git-pack-objects(1)
when no window size is given on the command line. Defaults to 10.
pack.depth
The maximum delta depth used by
git-pack-objects(1) when no maximum depth is given on the command line.
Defaults to 50. Maximum value is 4095.
pack.windowMemory
The maximum size of memory that is consumed by each
thread in
git-pack-objects(1) for pack window memory when no limit is
given on the command line. The value can be suffixed with "k",
"m", or "g". When left unconfigured (or set explicitly to
0), there will be no limit.
pack.compression
An integer -1..9, indicating the compression level for
objects in a pack file. -1 is the zlib default. 0 means no compression, and
1..9 are various speed/size tradeoffs, 9 being slowest. If not set, defaults
to core.compression. If that is not set, defaults to -1, the zlib default,
which is "a default compromise between speed and compression (currently
equivalent to level 6)."
Note that changing the compression level will not automatically
recompress all existing objects. You can force recompression by passing the
-F option to git-repack(1).
pack.allowPackReuse
When true, and when reachability bitmaps are enabled,
pack-objects will try to send parts of the bitmapped packfile verbatim. This
can reduce memory and CPU usage to serve fetches, but might result in sending
a slightly larger pack. Defaults to true.
pack.island
An extended regular expression configuring a set of delta
islands. See "DELTA ISLANDS" in
git-pack-objects(1) for
details.
pack.islandCore
Specify an island name which gets to have its objects be
packed first. This creates a kind of pseudo-pack at the front of one pack, so
that the objects from the specified island are hopefully faster to copy into
any pack that should be served to a user requesting these objects. In practice
this means that the island specified should likely correspond to what is the
most commonly cloned in the repo. See also "DELTA ISLANDS" in
git-pack-objects(1).
pack.deltaCacheSize
The maximum memory in bytes used for caching deltas in
git-pack-objects(1) before writing them out to a pack. This cache is
used to speed up the writing object phase by not having to recompute the final
delta result once the best match for all objects is found. Repacking large
repositories on machines which are tight with memory might be badly impacted
by this though, especially if this cache pushes the system into swapping. A
value of 0 means no limit. The smallest size of 1 byte may be used to
virtually disable this cache. Defaults to 256 MiB.
pack.deltaCacheLimit
The maximum size of a delta, that is cached in
git-pack-objects(1). This cache is used to speed up the writing object
phase by not having to recompute the final delta result once the best match
for all objects is found. Defaults to 1000. Maximum value is 65535.
pack.threads
Specifies the number of threads to spawn when searching
for best delta matches. This requires that
git-pack-objects(1) be
compiled with pthreads otherwise this option is ignored with a warning. This
is meant to reduce packing time on multiprocessor machines. The required
amount of memory for the delta search window is however multiplied by the
number of threads. Specifying 0 will cause Git to auto-detect the number of
CPU’s and set the number of threads accordingly.
pack.indexVersion
Specify the default pack index version. Valid values are
1 for legacy pack index used by Git versions prior to 1.5.2, and 2 for the new
pack index with capabilities for packs larger than 4 GB as well as proper
protection against the repacking of corrupted packs. Version 2 is the default.
Note that version 2 is enforced and this config option ignored whenever the
corresponding pack is larger than 2 GB.
If you have an old Git that does not understand the version 2
*.idx file, cloning or fetching over a non native protocol (e.g.
"http") that will copy both *.pack file and corresponding
*.idx file from the other side may give you a repository that cannot
be accessed with your older version of Git. If the *.pack file is
smaller than 2 GB, however, you can use git-index-pack(1) on the
*.pack file to regenerate the *.idx file.
pack.packSizeLimit
The maximum size of a pack. This setting only affects
packing to a file when repacking, i.e. the
git:// protocol is unaffected. It
can be overridden by the
--max-pack-size option of
git-repack(1). Reaching this limit results in the creation of multiple
packfiles.
Note that this option is rarely useful, and may result in a larger
total on-disk size (because Git will not store deltas between packs), as
well as worse runtime performance (object lookup within multiple packs is
slower than a single pack, and optimizations like reachability bitmaps
cannot cope with multiple packs).
If you need to actively run Git using smaller packfiles (e.g.,
because your filesystem does not support large files), this option may help.
But if your goal is to transmit a packfile over a medium that supports
limited sizes (e.g., removable media that cannot store the whole
repository), you are likely better off creating a single large packfile and
splitting it using a generic multi-volume archive tool (e.g., Unix
split).
The minimum size allowed is limited to 1 MiB. The default is
unlimited. Common unit suffixes of k, m, or g are
supported.
pack.useBitmaps
When true, git will use pack bitmaps (if available) when
packing to stdout (e.g., during the server side of a fetch). Defaults to true.
You should not generally need to turn this off unless you are debugging pack
bitmaps.
pack.useSparse
When true, git will default to using the --sparse
option in git pack-objects when the --revs option is present.
This algorithm only walks trees that appear in paths that introduce new
objects. This can have significant performance benefits when computing a pack
to send a small change. However, it is possible that extra objects are added
to the pack-file if the included commits contain certain types of direct
renames. Default is true.
pack.preferBitmapTips
When selecting which commits will receive bitmaps, prefer
a commit at the tip of any reference that is a suffix of any value of this
configuration over any other commits in the "selection window".
Note that setting this configuration to refs/foo does not
mean that the commits at the tips of refs/foo/bar and
refs/foo/baz will necessarily be selected. This is because commits
are selected for bitmaps from within a series of windows of variable
length.
If a commit at the tip of any reference which is a suffix of any
value of this configuration is seen in a window, it is immediately given
preference over any other commit in that window.
pack.writeBitmaps (deprecated)
This is a deprecated synonym for
repack.writeBitmaps.
pack.writeBitmapHashCache
When true, git will include a "hash cache"
section in the bitmap index (if one is written). This cache can be used to
feed git’s delta heuristics, potentially leading to better deltas
between bitmapped and non-bitmapped objects (e.g., when serving a fetch
between an older, bitmapped pack and objects that have been pushed since the
last gc). The downside is that it consumes 4 bytes per object of disk space.
Defaults to true.
When writing a multi-pack reachability bitmap, no new namehashes
are computed; instead, any namehashes stored in an existing bitmap are
permuted into their appropriate location when writing a new bitmap.
pack.writeReverseIndex
When true, git will write a corresponding .rev file (see:
Documentation/technical/pack-format.txt[1]) for each new packfile that
it writes in all places except for
git-fast-import(1) and in the bulk
checkin mechanism. Defaults to false.
pager.<cmd>
If the value is boolean, turns on or off pagination of
the output of a particular Git subcommand when writing to a tty. Otherwise,
turns on pagination for the subcommand using the pager specified by the value
of pager.<cmd>. If --paginate or --no-pager is
specified on the command line, it takes precedence over this option. To
disable pagination for all commands, set core.pager or GIT_PAGER
to cat.
pretty.<name>
Alias for a --pretty= format string, as specified in
git-log(1). Any aliases defined here can be used just as the built-in
pretty formats could. For example, running
git config pretty.changelog
"format:* %H %s" would cause the invocation
git log
--pretty=changelog to be equivalent to running
git log
"--pretty=format:* %H %s". Note that an alias with the same name
as a built-in format will be silently ignored.
protocol.allow
If set, provide a user defined default policy for all
protocols which don’t explicitly have a policy
(
protocol.<name>.allow). By default, if unset, known-safe
protocols (http, https, git, ssh, file) have a default policy of
always, known-dangerous protocols (ext) have a default policy of
never, and all other protocols have a default policy of
user.
Supported policies:
•always - protocol is always able to be
used.
•never - protocol is never able to be
used.
•user - protocol is only able to be used
when GIT_PROTOCOL_FROM_USER is either unset or has a value of 1. This
policy should be used when you want a protocol to be directly usable by the
user but don’t want it used by commands which execute clone/fetch/push
commands without user input, e.g. recursive submodule initialization.
protocol.<name>.allow
Set a policy to be used by protocol
<name>
with clone/fetch/push commands. See
protocol.allow above for the
available policies.
The protocol names currently used by git are:
•
file: any local file-based path (including
file:// URLs, or local paths)
•git: the anonymous git protocol over a
direct TCP connection (or proxy, if configured)
•
ssh: git over ssh (including
host:path syntax,
ssh://, etc).
•http: git over http, both "smart
http" and "dumb http". Note that this does not include
https; if you want to configure both, you must do so
individually.
•any external helpers are named by their protocol
(e.g., use hg to allow the git-remote-hg helper)
protocol.version
If set, clients will attempt to communicate with a server
using the specified protocol version. If the server does not support it,
communication falls back to version 0. If unset, the default is
2.
Supported versions:
•0 - the original wire protocol.
•1 - the original wire protocol with the
addition of a version string in the initial response from the server.
•2 - wire protocol version
2[2].
pull.ff
By default, Git does not create an extra merge commit
when merging a commit that is a descendant of the current commit. Instead, the
tip of the current branch is fast-forwarded. When set to false, this
variable tells Git to create an extra merge commit in such a case (equivalent
to giving the --no-ff option from the command line). When set to
only, only such fast-forward merges are allowed (equivalent to giving
the --ff-only option from the command line). This setting overrides
merge.ff when pulling.
pull.rebase
When true, rebase branches on top of the fetched branch,
instead of merging the default branch from the default remote when "git
pull" is run. See "branch.<name>.rebase" for setting this
on a per-branch basis.
When merges (or just m), pass the
--rebase-merges option to git rebase so that the local merge
commits are included in the rebase (see git-rebase(1) for
details).
When the value is interactive (or just i), the
rebase is run in interactive mode.
NOTE: this is a possibly dangerous operation; do not
use it unless you understand the implications (see git-rebase(1) for
details).
pull.octopus
The default merge strategy to use when pulling multiple
branches at once.
pull.twohead
The default merge strategy to use when pulling a single
branch.
push.default
Defines the action
git push should take if no
refspec is given (whether from the command-line, config, or elsewhere).
Different values are well-suited for specific workflows; for instance, in a
purely central workflow (i.e. the fetch source is equal to the push
destination),
upstream is probably what you want. Possible values are:
•nothing - do not push anything (error out)
unless a refspec is given. This is primarily meant for people who want to
avoid mistakes by always being explicit.
•current - push the current branch to
update a branch with the same name on the receiving end. Works in both central
and non-central workflows.
•upstream - push the current branch back to
the branch whose changes are usually integrated into the current branch (which
is called @{upstream}). This mode only makes sense if you are pushing
to the same repository you would normally pull from (i.e. central
workflow).
•tracking - This is a deprecated synonym
for upstream.
•
simple - pushes the current branch with
the same name on the remote.
If you are working on a centralized workflow (pushing to the same
repository you pull from, which is typically origin), then you need
to configure an upstream branch with the same name.
This mode is the default since Git 2.0, and is the safest option
suited for beginners.
•
matching - push all branches having the
same name on both ends. This makes the repository you are pushing to remember
the set of branches that will be pushed out (e.g. if you always push
maint and
master there and no other branches, the repository you
push to will have these two branches, and your local
maint and
master will be pushed there).
To use this mode effectively, you have to make sure all the
branches you would push out are ready to be pushed out before running git
push, as the whole point of this mode is to allow you to push all of the
branches in one go. If you usually finish work on only one branch and push
out the result, while other branches are unfinished, this mode is not for
you. Also this mode is not suitable for pushing into a shared central
repository, as other people may add new branches there, or update the tip of
existing branches outside your control.
This used to be the default, but not since Git 2.0 (simple
is the new default).
push.followTags
If set to true enable --follow-tags option by
default. You may override this configuration at time of push by specifying
--no-follow-tags.
push.gpgSign
May be set to a boolean value, or the string
if-asked. A true value causes all pushes to be GPG signed, as if
--signed is passed to
git-push(1). The string
if-asked
causes pushes to be signed if the server supports it, as if
--signed=if-asked is passed to
git push. A false value may
override a value from a lower-priority config file. An explicit command-line
flag always overrides this config option.
push.pushOption
When no
--push-option=<option> argument is
given from the command line,
git push behaves as if each <value>
of this variable is given as
--push-option=<value>.
This is a multi-valued variable, and an empty value can be used in
a higher priority configuration file (e.g. .git/config in a
repository) to clear the values inherited from a lower priority
configuration files (e.g. $HOME/.gitconfig).
Example:
/etc/gitconfig
push.pushoption = a
push.pushoption = b
~/.gitconfig
push.pushoption = c
repo/.git/config
push.pushoption =
push.pushoption = b
This will result in only b (a and c are cleared).
push.recurseSubmodules
Make sure all submodule commits used by the revisions to
be pushed are available on a remote-tracking branch. If the value is
check then Git will verify that all submodule commits that changed in
the revisions to be pushed are available on at least one remote of the
submodule. If any commits are missing, the push will be aborted and exit with
non-zero status. If the value is on-demand then all submodules that
changed in the revisions to be pushed will be pushed. If on-demand was not
able to push all necessary revisions it will also be aborted and exit with
non-zero status. If the value is no then default behavior of ignoring
submodules when pushing is retained. You may override this configuration at
time of push by specifying --recurse-submodules=check|on-demand|no. If
not set, no is used by default, unless submodule.recurse is set
(in which case a true value means on-demand).
push.useForceIfIncludes
If set to "true", it is equivalent to
specifying
--force-if-includes as an option to
git-push(1) in
the command line. Adding
--no-force-if-includes at the time of push
overrides this configuration setting.
push.negotiate
If set to "true", attempt to reduce the size of
the packfile sent by rounds of negotiation in which the client and the server
attempt to find commits in common. If "false", Git will rely solely
on the server’s ref advertisement to find commits in common.
rebase.backend
Default backend to use for rebasing. Possible choices are
apply or merge. In the future, if the merge backend gains all
remaining capabilities of the apply backend, this setting may become
unused.
rebase.stat
Whether to show a diffstat of what changed upstream since
the last rebase. False by default.
rebase.autoSquash
If set to true enable --autosquash option by
default.
rebase.autoStash
When set to true, automatically create a temporary stash
entry before the operation begins, and apply it after the operation ends. This
means that you can run rebase on a dirty worktree. However, use with care: the
final stash application after a successful rebase might result in non-trivial
conflicts. This option can be overridden by the
--no-autostash and
--autostash options of
git-rebase(1). Defaults to false.
rebase.missingCommitsCheck
If set to "warn", git rebase -i will print a
warning if some commits are removed (e.g. a line was deleted), however the
rebase will still proceed. If set to "error", it will print the
previous warning and stop the rebase, git rebase --edit-todo can then
be used to correct the error. If set to "ignore", no checking is
done. To drop a commit without warning or error, use the drop command
in the todo list. Defaults to "ignore".
rebase.instructionFormat
A format string, as specified in
git-log(1), to be
used for the todo list during an interactive rebase. The format will
automatically have the long commit hash prepended to the format.
rebase.abbreviateCommands
If set to true,
git rebase will use abbreviated
command names in the todo list resulting in something like this:
p deadbee The oneline of the commit
p fa1afe1 The oneline of the next commit
...
instead of:
pick deadbee The oneline of the commit
pick fa1afe1 The oneline of the next commit
...
Defaults to false.
rebase.rescheduleFailedExec
Automatically reschedule exec commands that
failed. This only makes sense in interactive mode (or when an --exec
option was provided). This is the same as specifying the
--reschedule-failed-exec option.
rebase.forkPoint
If set to false set --no-fork-point option by
default.
receive.advertiseAtomic
By default, git-receive-pack will advertise the atomic
push capability to its clients. If you don’t want to advertise this
capability, set this variable to false.
receive.advertisePushOptions
When set to true, git-receive-pack will advertise the
push options capability to its clients. False by default.
receive.autogc
By default, git-receive-pack will run "git-gc
--auto" after receiving data from git-push and updating refs. You can
stop it by setting this variable to false.
receive.certNonceSeed
By setting this variable to a string, git
receive-pack will accept a git push --signed and verifies it by
using a "nonce" protected by HMAC using this string as a secret
key.
receive.certNonceSlop
When a git push --signed sent a push certificate
with a "nonce" that was issued by a receive-pack serving the same
repository within this many seconds, export the "nonce" found in the
certificate to GIT_PUSH_CERT_NONCE to the hooks (instead of what the
receive-pack asked the sending side to include). This may allow writing checks
in pre-receive and post-receive a bit easier. Instead of
checking GIT_PUSH_CERT_NONCE_SLOP environment variable that records by
how many seconds the nonce is stale to decide if they want to accept the
certificate, they only can check GIT_PUSH_CERT_NONCE_STATUS is
OK.
receive.fsckObjects
If it is set to true, git-receive-pack will check all
received objects. See transfer.fsckObjects for what’s checked.
Defaults to false. If not set, the value of transfer.fsckObjects is
used instead.
receive.fsck.<msg-id>
receive.fsck.skipList
receive.keepAlive
After receiving the pack from the client,
receive-pack may produce no output (if --quiet was specified)
while processing the pack, causing some networks to drop the TCP connection.
With this option set, if receive-pack does not transmit any data in
this phase for receive.keepAlive seconds, it will send a short
keepalive packet. The default is 5 seconds; set to 0 to disable keepalives
entirely.
receive.unpackLimit
If the number of objects received in a push is below this
limit then the objects will be unpacked into loose object files. However if
the number of received objects equals or exceeds this limit then the received
pack will be stored as a pack, after adding any missing delta bases. Storing
the pack from a push can make the push operation complete faster, especially
on slow filesystems. If not set, the value of transfer.unpackLimit is
used instead.
receive.maxInputSize
If the size of the incoming pack stream is larger than
this limit, then git-receive-pack will error out, instead of accepting the
pack file. If not set or set to 0, then the size is unlimited.
receive.denyDeletes
If set to true, git-receive-pack will deny a ref update
that deletes the ref. Use this to prevent such a ref deletion via a
push.
receive.denyDeleteCurrent
If set to true, git-receive-pack will deny a ref update
that deletes the currently checked out branch of a non-bare repository.
receive.denyCurrentBranch
If set to true or "refuse", git-receive-pack
will deny a ref update to the currently checked out branch of a non-bare
repository. Such a push is potentially dangerous because it brings the HEAD
out of sync with the index and working tree. If set to "warn", print
a warning of such a push to stderr, but allow the push to proceed. If set to
false or "ignore", allow such pushes with no message. Defaults to
"refuse".
Another option is "updateInstead" which will update the
working tree if pushing into the current branch. This option is intended for
synchronizing working directories when one side is not easily accessible via
interactive ssh (e.g. a live web site, hence the requirement that the
working directory be clean). This mode also comes in handy when developing
inside a VM to test and fix code on different Operating Systems.
By default, "updateInstead" will refuse the push if the
working tree or the index have any difference from the HEAD, but the
push-to-checkout hook can be used to customize this. See
githooks(5).
receive.denyNonFastForwards
If set to true, git-receive-pack will deny a ref update
which is not a fast-forward. Use this to prevent such an update via a push,
even if that push is forced. This configuration variable is set when
initializing a shared repository.
receive.hideRefs
This variable is the same as transfer.hideRefs,
but applies only to receive-pack (and so affects pushes, but not
fetches). An attempt to update or delete a hidden ref by git push is
rejected.
receive.procReceiveRefs
This is a multi-valued variable that defines reference
prefixes to match the commands in
receive-pack. Commands matching the
prefixes will be executed by an external hook "proc-receive",
instead of the internal
execute_commands function. If this variable is
not defined, the "proc-receive" hook will never be used, and all
commands will be executed by the internal
execute_commands function.
For example, if this variable is set to "refs/for",
pushing to reference such as "refs/for/master" will not create or
update a reference named "refs/for/master", but may create or
update a pull request directly by running the hook
"proc-receive".
Optional modifiers can be provided in the beginning of the value
to filter commands for specific actions: create (a), modify (m), delete (d).
A ! can be included in the modifiers to negate the reference prefix
entry. E.g.:
git config --system --add receive.procReceiveRefs ad:refs/heads
git config --system --add receive.procReceiveRefs !:refs/heads
receive.updateServerInfo
If set to true, git-receive-pack will run
git-update-server-info after receiving data from git-push and updating
refs.
receive.shallowUpdate
If set to true, .git/shallow can be updated when new refs
require new shallow roots. Otherwise those refs are rejected.
remote.pushDefault
The remote to push to by default. Overrides
branch.<name>.remote for all branches, and is overridden by
branch.<name>.pushRemote for specific branches.
remote.<name>.url
remote.<name>.pushurl
remote.<name>.proxy
For remotes that require curl (http, https and ftp), the
URL to the proxy to use for that remote. Set to the empty string to disable
proxying for that remote.
remote.<name>.proxyAuthMethod
For remotes that require curl (http, https and ftp), the
method to use for authenticating against the proxy in use (probably set in
remote.<name>.proxy). See http.proxyAuthMethod.
remote.<name>.fetch
remote.<name>.push
remote.<name>.mirror
If true, pushing to this remote will automatically behave
as if the --mirror option was given on the command line.
remote.<name>.skipDefaultUpdate
remote.<name>.skipFetchAll
remote.<name>.receivepack
The default program to execute on the remote side when
pushing. See option --receive-pack of
git-push(1).
remote.<name>.uploadpack
The default program to execute on the remote side when
fetching. See option --upload-pack of
git-fetch-pack(1).
remote.<name>.tagOpt
Setting this value to --no-tags disables automatic tag
following when fetching from remote <name>. Setting it to --tags will
fetch every tag from remote <name>, even if they are not reachable from
remote branch heads. Passing these flags directly to
git-fetch(1) can
override this setting. See options --tags and --no-tags of
git-fetch(1).
remote.<name>.vcs
Setting this to a value <vcs> will cause Git to
interact with the remote with the git-remote-<vcs> helper.
remote.<name>.prune
When set to true, fetching from this remote by default
will also remove any remote-tracking references that no longer exist on the
remote (as if the --prune option was given on the command line).
Overrides fetch.prune settings, if any.
remote.<name>.pruneTags
When set to true, fetching from this remote by default
will also remove any local tags that no longer exist on the remote if pruning
is activated in general via
remote.<name>.prune,
fetch.prune or
--prune. Overrides
fetch.pruneTags
settings, if any.
See also remote.<name>.prune and the PRUNING section
of git-fetch(1).
remote.<name>.promisor
When set to true, this remote will be used to fetch
promisor objects.
remote.<name>.partialclonefilter
The filter that will be applied when fetching from this
promisor remote.
remotes.<group>
The list of remotes which are fetched by "git remote
update <group>". See
git-remote(1).
repack.useDeltaBaseOffset
By default,
git-repack(1) creates packs that use
delta-base offset. If you need to share your repository with Git older than
version 1.4.4, either directly or via a dumb protocol such as http, then you
need to set this option to "false" and repack. Access from old Git
versions over the native protocol are unaffected by this option.
repack.packKeptObjects
If set to true, makes
git repack act as if
--pack-kept-objects was passed. See
git-repack(1) for details.
Defaults to
false normally, but
true if a bitmap index is being
written (either via
--write-bitmap-index or
repack.writeBitmaps).
repack.useDeltaIslands
If set to true, makes git repack act as if
--delta-islands was passed. Defaults to false.
repack.writeBitmaps
When true, git will write a bitmap index when packing all
objects to disk (e.g., when git repack -a is run). This index can speed
up the "counting objects" phase of subsequent packs created for
clones and fetches, at the cost of some disk space and extra time spent on the
initial repack. This has no effect if multiple packfiles are created. Defaults
to true on bare repos, false otherwise.
rerere.autoUpdate
When set to true, git-rerere updates the index
with the resulting contents after it cleanly resolves conflicts using
previously recorded resolution. Defaults to false.
rerere.enabled
Activate recording of resolved conflicts, so that
identical conflict hunks can be resolved automatically, should they be
encountered again. By default,
git-rerere(1) is enabled if there is an
rr-cache directory under the
$GIT_DIR, e.g. if
"rerere" was previously used in the repository.
reset.quiet
When set to true, git reset will default to the
--quiet option.
sendemail.identity
A configuration identity. When given, causes values in
the sendemail.<identity> subsection to take precedence over
values in the sendemail section. The default identity is the value of
sendemail.identity.
sendemail.smtpEncryption
See
git-send-email(1) for description. Note that
this setting is not subject to the
identity mechanism.
sendemail.smtpsslcertpath
Path to ca-certificates (either a directory or a single
file). Set it to an empty string to disable certificate verification.
sendemail.<identity>.*
Identity-specific versions of the sendemail.*
parameters found below, taking precedence over those when this identity is
selected, through either the command-line or sendemail.identity.
sendemail.aliasesFile, sendemail.aliasFileType,
sendemail.annotate, sendemail.bcc, sendemail.cc, sendemail.ccCmd,
sendemail.chainReplyTo, sendemail.confirm, sendemail.envelopeSender,
sendemail.from, sendemail.multiEdit, sendemail.signedoffbycc,
sendemail.smtpPass, sendemail.suppresscc, sendemail.suppressFrom,
sendemail.to, sendemail.tocmd, sendemail.smtpDomain, sendemail.smtpServer,
sendemail.smtpServerPort, sendemail.smtpServerOption, sendemail.smtpUser,
sendemail.thread, sendemail.transferEncoding, sendemail.validate,
sendemail.xmailer
sendemail.signedoffcc (deprecated)
Deprecated alias for
sendemail.signedoffbycc.
sendemail.smtpBatchSize
Number of messages to be sent per connection, after that
a relogin will happen. If the value is 0 or undefined, send all messages in
one connection. See also the
--batch-size option of
git-send-email(1).
sendemail.smtpReloginDelay
Seconds wait before reconnecting to smtp server. See also
the
--relogin-delay option of
git-send-email(1).
sendemail.forbidSendmailVariables
To avoid common misconfiguration mistakes,
git-send-email(1) will abort with a warning if any configuration
options for "sendmail" exist. Set this variable to bypass the
check.
sequence.editor
Text editor used by git rebase -i for editing the
rebase instruction file. The value is meant to be interpreted by the shell
when it is used. It can be overridden by the GIT_SEQUENCE_EDITOR
environment variable. When not configured the default commit message editor is
used instead.
showBranch.default
splitIndex.maxPercentChange
When the split index feature is used, this specifies the
percent of entries the split index can contain compared to the total number of
entries in both the split index and the shared index before a new shared index
is written. The value should be between 0 and 100. If the value is 0 then a
new shared index is always written, if it is 100 a new shared index is never
written. By default the value is 20, so a new shared index is written if the
number of entries in the split index would be greater than 20 percent of the
total number of entries. See
git-update-index(1).
splitIndex.sharedIndexExpire
When the split index feature is used, shared index files
that were not modified since the time this variable specifies will be removed
when a new shared index file is created. The value "now" expires all
entries immediately, and "never" suppresses expiration altogether.
The default value is "2.weeks.ago". Note that a shared index file is
considered modified (for the purpose of expiration) each time a new
split-index file is either created based on it or read from it. See
git-update-index(1).
ssh.variant
By default, Git determines the command line arguments to
use based on the basename of the configured SSH command (configured using the
environment variable
GIT_SSH or
GIT_SSH_COMMAND or the config
setting
core.sshCommand). If the basename is unrecognized, Git will
attempt to detect support of OpenSSH options by first invoking the configured
SSH command with the
-G (print configuration) option and will
subsequently use OpenSSH options (if that is successful) or no options besides
the host and remote command (if it fails).
The config variable ssh.variant can be set to override this
detection. Valid values are ssh (to use OpenSSH options),
plink, putty, tortoiseplink, simple (no options
except the host and remote command). The default auto-detection can be
explicitly requested using the value auto. Any other value is treated
as ssh. This setting can also be overridden via the environment
variable GIT_SSH_VARIANT.
The current command-line parameters used for each variant are as
follows:
•ssh - [-p port] [-4] [-6] [-o option]
[username@]host command
•simple - [username@]host command
•plink or putty - [-P port] [-4]
[-6] [username@]host command
•tortoiseplink - [-P port] [-4] [-6] -batch
[username@]host command
Except for the simple variant, command-line parameters are
likely to change as git gains new features.
status.relativePaths
By default,
git-status(1) shows paths relative to
the current directory. Setting this variable to
false shows paths
relative to the repository root (this was the default for Git prior to
v1.5.4).
status.short
Set to true to enable --short by default in
git-status(1). The option --no-short takes precedence over this
variable.
status.branch
Set to true to enable --branch by default in
git-status(1). The option --no-branch takes precedence over this
variable.
status.aheadBehind
Set to true to enable
--ahead-behind and false to
enable
--no-ahead-behind by default in
git-status(1) for
non-porcelain status formats. Defaults to true.
status.displayCommentPrefix
If set to true,
git-status(1) will insert a
comment prefix before each output line (starting with
core.commentChar,
i.e.
# by default). This was the behavior of
git-status(1) in
Git 1.8.4 and previous. Defaults to false.
status.renameLimit
The number of files to consider when performing rename
detection in
git-status(1) and
git-commit(1). Defaults to the
value of diff.renameLimit.
status.renames
Whether and how Git detects renames in
git-status(1) and
git-commit(1) . If set to "false",
rename detection is disabled. If set to "true", basic rename
detection is enabled. If set to "copies" or "copy", Git
will detect copies, as well. Defaults to the value of diff.renames.
status.showStash
If set to true,
git-status(1) will display the
number of entries currently stashed away. Defaults to false.
status.showUntrackedFiles
By default,
git-status(1) and
git-commit(1)
show files which are not currently tracked by Git. Directories which contain
only untracked files, are shown with the directory name only. Showing
untracked files means that Git needs to lstat() all the files in the whole
repository, which might be slow on some systems. So, this variable controls
how the commands displays the untracked files. Possible values are:
•no - Show no untracked files.
•normal - Show untracked files and
directories.
•all - Show also individual files in
untracked directories.
If this variable is not specified, it defaults to normal.
This variable can be overridden with the -u|--untracked-files option of
git-status(1) and git-commit(1).
status.submoduleSummary
Defaults to false. If this is set to a non zero number or
true (identical to -1 or an unlimited number), the submodule summary will be
enabled and a summary of commits for modified submodules will be shown (see
--summary-limit option of
git-submodule(1)). Please note that the
summary output command will be suppressed for all submodules when
diff.ignoreSubmodules is set to
all or only for those submodules
where
submodule.<name>.ignore=all. The only exception to that
rule is that status and commit will show staged submodule changes. To also
view the summary for ignored submodules you can either use the
--ignore-submodules=dirty command-line option or the
git submodule
summary command, which shows a similar output but does not honor these
settings.
stash.useBuiltin
Unused configuration variable. Used in Git versions 2.22
to 2.26 as an escape hatch to enable the legacy shellscript implementation of
stash. Now the built-in rewrite of it in C is always used. Setting this will
emit a warning, to alert any remaining users that setting this now does
nothing.
stash.showIncludeUntracked
If this is set to true, the
git stash show command
will show the untracked files of a stash entry. Defaults to false. See
description of
show command in
git-stash(1).
stash.showPatch
If this is set to true, the
git stash show command
without an option will show the stash entry in patch form. Defaults to false.
See description of
show command in
git-stash(1).
stash.showStat
If this is set to true, the
git stash show command
without an option will show diffstat of the stash entry. Defaults to true. See
description of
show command in
git-stash(1).
submodule.<name>.url
The URL for a submodule. This variable is copied from the
.gitmodules file to the git config via
git submodule init. The user can
change the configured URL before obtaining the submodule via
git submodule
update. If neither submodule.<name>.active or submodule.active are
set, the presence of this variable is used as a fallback to indicate whether
the submodule is of interest to git commands. See
git-submodule(1) and
gitmodules(5) for details.
submodule.<name>.update
The method by which a submodule is updated by
git
submodule update, which is the only affected command, others such as
git checkout --recurse-submodules are unaffected. It exists for
historical reasons, when
git submodule was the only command to interact
with submodules; settings like
submodule.active and
pull.rebase
are more specific. It is populated by
git submodule init from the
gitmodules(5) file. See description of
update command in
git-submodule(1).
submodule.<name>.branch
The remote branch name for a submodule, used by
git
submodule update --remote. Set this option to override the value found in
the
.gitmodules file. See
git-submodule(1) and
gitmodules(5) for details.
submodule.<name>.fetchRecurseSubmodules
This option can be used to control recursive fetching of
this submodule. It can be overridden by using the --[no-]recurse-submodules
command-line option to "git fetch" and "git pull". This
setting will override that from in the
gitmodules(5) file.
submodule.<name>.ignore
Defines under what circumstances "git status"
and the diff family show a submodule as modified. When set to "all",
it will never be considered modified (but it will nonetheless show up in the
output of status and commit when it has been staged), "dirty" will
ignore all changes to the submodules work tree and takes only differences
between the HEAD of the submodule and the commit recorded in the superproject
into account. "untracked" will additionally let submodules with
modified tracked files in their work tree show up. Using "none" (the
default when this option is not set) also shows submodules that have untracked
files in their work tree as changed. This setting overrides any setting made
in .gitmodules for this submodule, both settings can be overridden on the
command line by using the "--ignore-submodules" option. The git
submodule commands are not affected by this setting.
submodule.<name>.active
Boolean value indicating if the submodule is of interest
to git commands. This config option takes precedence over the submodule.active
config option. See
gitsubmodules(7) for details.
submodule.active
A repeated field which contains a pathspec used to match
against a submodule’s path to determine if the submodule is of interest
to git commands. See
gitsubmodules(7) for details.
submodule.recurse
A boolean indicating if commands should enable the
--recurse-submodules option by default. Applies to all commands that
support this option (checkout, fetch, grep, pull,
push, read-tree, reset, restore and switch)
except clone and ls-files. Defaults to false. When set to true,
it can be deactivated via the --no-recurse-submodules option. Note that
some Git commands lacking this option may call some of the above commands
affected by submodule.recurse; for instance git remote update
will call git fetch but does not have a --no-recurse-submodules
option. For these commands a workaround is to temporarily change the
configuration value by using git -c submodule.recurse=0.
submodule.fetchJobs
Specifies how many submodules are fetched/cloned at the
same time. A positive integer allows up to that number of submodules fetched
in parallel. A value of 0 will give some reasonable default. If unset, it
defaults to 1.
submodule.alternateLocation
Specifies how the submodules obtain alternates when
submodules are cloned. Possible values are no, superproject. By
default no is assumed, which doesn’t add references. When the
value is set to superproject the submodule to be cloned computes its
alternates location relative to the superprojects alternate.
submodule.alternateErrorStrategy
Specifies how to treat errors with the alternates for a
submodule as computed via submodule.alternateLocation. Possible values
are ignore, info, die. Default is die. Note that
if set to ignore or info, and if there is an error with the
computed alternate, the clone proceeds as if no alternate was specified.
tag.forceSignAnnotated
A boolean to specify whether annotated tags created
should be GPG signed. If --annotate is specified on the command line,
it takes precedence over this option.
tag.sort
This variable controls the sort ordering of tags when
displayed by
git-tag(1). Without the "--sort=<value>"
option provided, the value of this variable will be used as the default.
tag.gpgSign
A boolean to specify whether all tags should be GPG
signed. Use of this option when running in an automated script can result in a
large number of tags being signed. It is therefore convenient to use an agent
to avoid typing your gpg passphrase several times. Note that this option
doesn’t affect tag signing behavior enabled by "-u
<keyid>" or "--local-user=<keyid>" options.
tar.umask
This variable can be used to restrict the permission bits
of tar archive entries. The default is 0002, which turns off the world write
bit. The special value "user" indicates that the archiving
user’s umask will be used instead. See
umask(2) and
git-archive(1).
Trace2 config settings are only read from the system and global
config files; repository local and worktree config files and -c
command line arguments are not respected.
trace2.normalTarget
This variable controls the normal target destination. It
may be overridden by the GIT_TRACE2 environment variable. The following
table shows possible values.
trace2.perfTarget
This variable controls the performance target
destination. It may be overridden by the GIT_TRACE2_PERF environment
variable. The following table shows possible values.
trace2.eventTarget
This variable controls the event target destination. It
may be overridden by the
GIT_TRACE2_EVENT environment variable. The
following table shows possible values.
•0 or false - Disables the
target.
•1 or true - Writes to
STDERR.
•[2-9] - Writes to the already opened file
descriptor.
•<absolute-pathname> - Writes to the
file in append mode. If the target already exists and is a directory, the
traces will be written to files (one per process) underneath the given
directory.
•af_unix:[<socket_type>:]<absolute-pathname>
- Write to a Unix DomainSocket (on platforms that support them). Socket type
can be either stream or dgram; if omitted Git will try
both.
trace2.normalBrief
Boolean. When true time, filename, and
line fields are omitted from normal output. May be overridden by the
GIT_TRACE2_BRIEF environment variable. Defaults to false.
trace2.perfBrief
Boolean. When true time, filename, and
line fields are omitted from PERF output. May be overridden by the
GIT_TRACE2_PERF_BRIEF environment variable. Defaults to false.
trace2.eventBrief
Boolean. When true time, filename, and
line fields are omitted from event output. May be overridden by the
GIT_TRACE2_EVENT_BRIEF environment variable. Defaults to false.
trace2.eventNesting
Integer. Specifies desired depth of nested regions in the
event output. Regions deeper than this value will be omitted. May be
overridden by the GIT_TRACE2_EVENT_NESTING environment variable.
Defaults to 2.
trace2.configParams
A comma-separated list of patterns of
"important" config settings that should be recorded in the trace2
output. For example, core.*,remote.*.url would cause the trace2 output
to contain events listing each configured remote. May be overridden by the
GIT_TRACE2_CONFIG_PARAMS environment variable. Unset by default.
trace2.envVars
A comma-separated list of "important"
environment variables that should be recorded in the trace2 output. For
example, GIT_HTTP_USER_AGENT,GIT_CONFIG would cause the trace2 output
to contain events listing the overrides for HTTP user agent and the location
of the Git configuration file (assuming any are set). May be overridden by the
GIT_TRACE2_ENV_VARS environment variable. Unset by default.
trace2.destinationDebug
Boolean. When true Git will print error messages when a
trace target destination cannot be opened for writing. By default, these
errors are suppressed and tracing is silently disabled. May be overridden by
the GIT_TRACE2_DST_DEBUG environment variable.
trace2.maxFiles
Integer. When writing trace files to a target directory,
do not write additional traces if we would exceed this many files. Instead,
write a sentinel file that will block further tracing to this directory.
Defaults to 0, which disables this check.
transfer.fsckObjects
When
fetch.fsckObjects or
receive.fsckObjects are not set, the value of this variable is used
instead. Defaults to false.
When set, the fetch or receive will abort in the case of a
malformed object or a link to a nonexistent object. In addition, various
other issues are checked for, including legacy issues (see
fsck.<msg-id>), and potential security issues like the
existence of a .GIT directory or a malicious .gitmodules file
(see the release notes for v2.2.1 and v2.17.1 for details). Other sanity and
security checks may be added in future releases.
On the receiving side, failing fsckObjects will make those objects
unreachable, see "QUARANTINE ENVIRONMENT" in
git-receive-pack(1). On the fetch side, malformed objects will
instead be left unreferenced in the repository.
Due to the non-quarantine nature of the fetch.fsckObjects
implementation it cannot be relied upon to leave the object store clean like
receive.fsckObjects can.
As objects are unpacked they’re written to the object
store, so there can be cases where malicious objects get introduced even
though the "fetch" failed, only to have a subsequent
"fetch" succeed because only new incoming objects are checked, not
those that have already been written to the object store. That difference in
behavior should not be relied upon. In the future, such objects may be
quarantined for "fetch" as well.
For now, the paranoid need to find some way to emulate the
quarantine environment if they’d like the same protection as
"push". E.g. in the case of an internal mirror do the mirroring in
two steps, one to fetch the untrusted objects, and then do a second
"push" (which will use the quarantine) to another internal repo,
and have internal clients consume this pushed-to repository, or embargo
internal fetches and only allow them once a full "fsck" has run
(and no new fetches have happened in the meantime).
transfer.hideRefs
String(s)
receive-pack and
upload-pack use
to decide which refs to omit from their initial advertisements. Use more than
one definition to specify multiple prefix strings. A ref that is under the
hierarchies listed in the value of this variable is excluded, and is hidden
when responding to
git push or
git fetch. See
receive.hideRefs and
uploadpack.hideRefs for program-specific
versions of this config.
You may also include a ! in front of the ref name to negate
the entry, explicitly exposing it, even if an earlier entry marked it as
hidden. If you have multiple hideRefs values, later entries override earlier
ones (and entries in more-specific config files override less-specific
ones).
If a namespace is in use, the namespace prefix is stripped from
each reference before it is matched against transfer.hiderefs
patterns. In order to match refs before stripping, add a ^ in front
of the ref name. If you combine ! and ^, ! must be
specified first.
For example, if refs/heads/master is specified in
transfer.hideRefs and the current namespace is foo, then
refs/namespaces/foo/refs/heads/master is omitted from the
advertisements. If uploadpack.allowRefInWant is set,
upload-pack will treat want-ref refs/heads/master in a
protocol v2 fetch command as if
refs/namespaces/foo/refs/heads/master did not exist.
receive-pack, on the other hand, will still advertise the object id
the ref is pointing to without mentioning its name (a so-called
".have" line).
Even if you hide refs, a client may still be able to steal the
target objects via the techniques described in the "SECURITY"
section of the gitnamespaces(7) man page; it’s best to keep
private data in a separate repository.
transfer.unpackLimit
When fetch.unpackLimit or
receive.unpackLimit are not set, the value of this variable is used
instead. The default value is 100.
transfer.advertiseSID
Boolean. When true, client and server processes will
advertise their unique session IDs to their remote counterpart. Defaults to
false.
uploadarchive.allowUnreachable
If true, allow clients to use
git archive --remote
to request any tree, whether reachable from the ref tips or not. See the
discussion in the "SECURITY" section of
git-upload-archive(1)
for more details. Defaults to
false.
uploadpack.hideRefs
This variable is the same as transfer.hideRefs,
but applies only to upload-pack (and so affects only fetches, not
pushes). An attempt to fetch a hidden ref by git fetch will fail. See
also uploadpack.allowTipSHA1InWant.
uploadpack.allowTipSHA1InWant
When
uploadpack.hideRefs is in effect, allow
upload-pack to accept a fetch request that asks for an object at the
tip of a hidden ref (by default, such a request is rejected). See also
uploadpack.hideRefs. Even if this is false, a client may be able to
steal objects via the techniques described in the "SECURITY" section
of the
gitnamespaces(7) man page; it’s best to keep private data
in a separate repository.
uploadpack.allowReachableSHA1InWant
Allow
upload-pack to accept a fetch request that
asks for an object that is reachable from any ref tip. However, note that
calculating object reachability is computationally expensive. Defaults to
false. Even if this is false, a client may be able to steal objects via
the techniques described in the "SECURITY" section of the
gitnamespaces(7) man page; it’s best to keep private data in a
separate repository.
uploadpack.allowAnySHA1InWant
Allow upload-pack to accept a fetch request that
asks for any object at all. Defaults to false.
uploadpack.keepAlive
When upload-pack has started pack-objects,
there may be a quiet period while pack-objects prepares the pack.
Normally it would output progress information, but if --quiet was used
for the fetch, pack-objects will output nothing at all until the pack
data begins. Some clients and networks may consider the server to be hung and
give up. Setting this option instructs upload-pack to send an empty
keepalive packet every uploadpack.keepAlive seconds. Setting this
option to 0 disables keepalive packets entirely. The default is 5
seconds.
uploadpack.packObjectsHook
If this option is set, when
upload-pack would run
git pack-objects to create a packfile for a client, it will run this
shell command instead. The
pack-objects command and arguments it
would have run (including the
git pack-objects at the beginning)
are appended to the shell command. The stdin and stdout of the hook are
treated as if
pack-objects itself was run. I.e.,
upload-pack
will feed input intended for
pack-objects to the hook, and expects a
completed packfile on stdout.
Note that this configuration variable is ignored if it is seen in
the repository-level config (this is a safety measure against fetching from
untrusted repositories).
uploadpack.allowFilter
If this option is set, upload-pack will support
partial clone and partial fetch object filtering.
uploadpackfilter.allow
Provides a default value for unspecified object filters
(see: the below configuration variable). If set to true, this will also
enable all filters which get added in the future. Defaults to
true.
uploadpackfilter.<filter>.allow
Explicitly allow or ban the object filter corresponding
to <filter>, where <filter> may be one of:
blob:none, blob:limit, object:type, tree,
sparse:oid, or combine. If using combined filters, both
combine and all of the nested filter kinds must be allowed. Defaults to
uploadpackfilter.allow.
uploadpackfilter.tree.maxDepth
Only allow --filter=tree:<n> when
<n> is no more than the value of
uploadpackfilter.tree.maxDepth. If set, this also implies
uploadpackfilter.tree.allow=true, unless this configuration variable
had already been set. Has no effect if unset.
uploadpack.allowRefInWant
If this option is set, upload-pack will support
the ref-in-want feature of the protocol version 2 fetch command.
This feature is intended for the benefit of load-balanced servers which may
not have the same view of what OIDs their refs point to due to replication
delay.
url.<base>.insteadOf
Any URL that starts with this value will be rewritten to
start, instead, with <base>. In cases where some site serves a large
number of repositories, and serves them with multiple access methods, and some
users need to use different access methods, this feature allows people to
specify any of the equivalent URLs and have Git automatically rewrite the URL
to the best alternative for the particular user, even for a never-before-seen
repository on the site. When more than one insteadOf strings match a given
URL, the longest match is used.
Note that any protocol restrictions will be applied to the
rewritten URL. If the rewrite changes the URL to use a custom protocol or
remote helper, you may need to adjust the protocol.*.allow config to
permit the request. In particular, protocols you expect to use for
submodules must be set to always rather than the default of
user. See the description of protocol.allow above.
url.<base>.pushInsteadOf
Any URL that starts with this value will not be pushed
to; instead, it will be rewritten to start with <base>, and the
resulting URL will be pushed to. In cases where some site serves a large
number of repositories, and serves them with multiple access methods, some of
which do not allow push, this feature allows people to specify a pull-only URL
and have Git automatically use an appropriate URL to push, even for a
never-before-seen repository on the site. When more than one pushInsteadOf
strings match a given URL, the longest match is used. If a remote has an
explicit pushurl, Git will ignore this setting for that remote.
user.name, user.email, author.name, author.email, committer.name,
committer.email
The
user.name and
user.email variables
determine what ends up in the
author and
committer field of
commit objects. If you need the
author or
committer to be
different, the
author.name,
author.email,
committer.name
or
committer.email variables can be set. Also, all of these can be
overridden by the
GIT_AUTHOR_NAME,
GIT_AUTHOR_EMAIL,
GIT_COMMITTER_NAME,
GIT_COMMITTER_EMAIL and
EMAIL
environment variables.
Note that the name forms of these variables conventionally
refer to some form of a personal name. See git-commit(1) and the
environment variables section of git(1) for more information on these
settings and the credential.username option if you’re looking
for authentication credentials instead.
user.useConfigOnly
Instruct Git to avoid trying to guess defaults for
user.email and user.name, and instead retrieve the values only
from the configuration. For example, if you have multiple email addresses and
would like to use a different one for each repository, then with this
configuration option set to true in the global config along with a
name, Git will prompt you to set up an email before making new commits in a
newly cloned repository. Defaults to false.
user.signingKey
If
git-tag(1) or
git-commit(1) is not
selecting the key you want it to automatically when creating a signed tag or
commit, you can override the default selection with this variable. This option
is passed unchanged to gpg’s --local-user parameter, so you may specify
a key using any method that gpg supports. If gpg.format is set to
ssh
this can contain the path to either your private ssh key or the public key
when ssh-agent is used. Alternatively it can contain a public key prefixed
with
key:: directly (e.g.: "key::ssh-rsa XXXXXX identifier").
The private key needs to be available via ssh-agent. If not set git will call
gpg.ssh.defaultKeyCommand (e.g.: "ssh-add -L") and try to use the
first key available. For backward compatibility, a raw key which begins with
"ssh-", such as "ssh-rsa XXXXXX identifier", is treated as
"key::ssh-rsa XXXXXX identifier", but this form is deprecated; use
the
key:: form instead.
versionsort.prereleaseSuffix (deprecated)
Deprecated alias for versionsort.suffix. Ignored
if versionsort.suffix is set.
versionsort.suffix
Even when version sort is used in
git-tag(1),
tagnames with the same base version but different suffixes are still sorted
lexicographically, resulting e.g. in prerelease tags appearing after the main
release (e.g. "1.0-rc1" after "1.0"). This variable can be
specified to determine the sorting order of tags with different suffixes.
By specifying a single suffix in this variable, any tagname
containing that suffix will appear before the corresponding main release.
E.g. if the variable is set to "-rc", then all "1.0-rcX"
tags will appear before "1.0". If specified multiple times, once
per suffix, then the order of suffixes in the configuration will determine
the sorting order of tagnames with those suffixes. E.g. if "-pre"
appears before "-rc" in the configuration, then all
"1.0-preX" tags will be listed before any "1.0-rcX"
tags. The placement of the main release tag relative to tags with various
suffixes can be determined by specifying the empty suffix among those other
suffixes. E.g. if the suffixes "-rc", "",
"-ck" and "-bfs" appear in the configuration in this
order, then all "v4.8-rcX" tags are listed first, followed by
"v4.8", then "v4.8-ckX" and finally
"v4.8-bfsX".
If more than one suffixes match the same tagname, then that
tagname will be sorted according to the suffix which starts at the earliest
position in the tagname. If more than one different matching suffixes start
at that earliest position, then that tagname will be sorted according to the
longest of those suffixes. The sorting order between different suffixes is
undefined if they are in multiple config files.
web.browser
worktree.guessRemote
If no branch is specified and neither -b nor
-B nor --detach is used, then git worktree add defaults
to creating a new branch from HEAD. If worktree.guessRemote is set to
true, worktree add tries to find a remote-tracking branch whose name
uniquely matches the new branch name. If such a branch exists, it is checked
out and set as "upstream" for the new branch. If no such match can
be found, it falls back to creating a new branch from the current HEAD.