|abicheck(1)||General Commands Manual||abicheck(1)|
NAME¶abicheck - check application binaries for calls to private or evolving symbols in libraries and for static linking of some system libraries.
SYNOPSIS¶abicheck [-h] [-k] [-a] [-I] [-v] [-f listfile] [-o outfile] [-p pattern] [-e pattern] [-j njobs] [-l library] [-L ldpath] [(-s|-S) dbfile] [(-d|-D) dbfile] [-O dbfile] [-A listfile] files
DESCRIPTION¶abicheck is run on application binaries and issues warnings whenever any of the following three conditions are detected:
• Private symbol usage. Private symbols are functions or data variables in a library package that are internal to that package. They are used by the libraries in the package for internal communication and are not part of the API/ABI that application developers should use.
• Evolving symbol usage. Evolving symbols are functions or data variables in a library package that are intended for developer consumption, but have been marked as "evolving" or "unstable" in the sense that they may become incompatible or disappear on a later release of the library package.
• Static linking. Static linking of system libraries (for example, libc.a) into an application is generally not a good idea because the system library code it "locks" into the application binary may become incompatible with later releases of the system. abicheck attempts to detect static linking of a few system libraries.
The default behavior is, for each binary object checked, to examine direct calls from that binary object only. The -l option allows the libraries the binary object brings in to have their calls checked as well.
OPTIONS¶The following options are supported:
- Keep on checking binaries even if there are serious errors (dynamic linker reports unresolved symbols, ldd(1) failures, no symbols detected).
- Print out long form of help.
- Verbose. Print out additional information.
- -f listfile
- The listfile is a file containing a list of binary objects to check, one per line. This list is appended to any files provided as arguments on the command line. If listfile is "-", then stdin is used.
- -o outfile
- Write output to outfile instead of stdout.
- -p pattern
- Modify the version name pattern match labelling private version sets.
Default is /private/ using a case-insensitive match.
If a component of the regex pattern contains two colons in a row: patt1::patt2, then symbol-level matching will be activated by checking whether version::symbol or library::symbol matches pattern (where the symbol name, version (if any), and library basename are substituted for symbol, version, and library). For example,
or -p 'libfoo.so.*::_foopriv'
- -e pattern
- Same as -p but for "evolving" interfaces.
- -L ldpath
- Set the LD_LIBRARY_PATH environment variable to ldpath
before invoking dynamic linker. Use -L "" to unset
If one of the components of ldpath is the string "find", then all shared libraries in files are found and their paths inserted into the "find" location. Note that the order will random.
- -l library
- Add the basename or full pathname of the shared library library to the list of objects to be checked for making private calls. This option may occur more than once on the command line and is additive. By default, only direct calls from a binary to the system libraries are checked. The -l switch allows checking of indirect calls e.g.: app -> supportlib -> systemlib.
- Loop through all of the binaries before checking and collect the list of all shared objects. Take the basename of each shared object found and act as though it was specified with the -l option option and then run the abicheck checks. This way, calls from all "application internal" objects are checked rather than just the direct calls. (Useful when shared objects do not have their dependencies recorded.)
- Ignore shared libraries in checking, only check executables. Compatible with -a, libraries will be searched for first but then not checked.
- -d dbfile, -D dbfile
- Specify fallback flat-file symbol database for the dynamic (public vs.
private) test. These classifications will be used if the library is not
versioned (i.e. classification does not exist in the library itself). Use
-D to indicate that only information from dbfile should be
used. Lines in dbfile can be of one of these forms:
library must be the full path to the library to be specified (it cannot be a basename).
The first form marks symbol as private.
The second form marks symbol with class where class may be public, private, or evolving.
The third form indicates the file path should be opened on demand when library is first encountered. File path contains lines of the first two forms except for the library field. The third form is a speedup to avoid processing many classification lines for libraries never encountered in the run.
- -O dbfile
- Specify an override file to modify the symbol classification for the
dynamic (public vs. private) test. The format for the override file is
The library can be the full path or basename. If library is "__SKIP__" the symbol will be ignored for any library it is found in. The class can be "public", "private", "evolving", or "deleted". The "deleted" class is special-cased, means the symbol was deleted from the library on some release. The symbol "__ALL__" for the "deleted" class means the entire library was deleted or is otherwise unstable to use.
These settings override any classification inside the library (from library versioning, obtainable from pvs(1), etc).
- -A listfile
- Set the ABI libraries of interest to the libraries listed in listfile (full pathnames, one per line). Only calls into these libraries will be checked; all other library calls will be ignored.
- -s dbfile, -S dbfile
- Specify more extensive symbol databases for the static linking test.
dbfile may be a comma separated list of files. If a file is a
static archive (lib*.a) it is processed to extract the symbols. Otherwise
it is a database file consisting of lines of the form
symbol|library:module for example:
shmat|/usr/lib/libc.a:shmsys.o shmctl|/usr/lib/libc.a:shmsys.o shmdt|/usr/lib/libc.a:shmsys.o shmget|/usr/lib/libc.a:shmsys.o ...
When all symbols in a module.o are defined in the application, static linking of that module (and corresponding library archive) is assumed. Use -S to indicate that only the static link test should be performed.
Use -S int to do only the static link check and using the internal database.
Use -s none or -S none to skip the static linking check entirely.
- -j njobs
- Run njobs in parallel as separate processes. Implies -k.
Primarily intended for multiple CPU machines where njobs should be
close to the number of processors. Output is collected in tmp files and
printed all at once near the end of the run as each job finishes.
If njobs is "-", "detect", or "n", then njobs will be set to a number depending on the number of processors on the current machine (if that can be determined).
OPERANDS¶The following operands are supported:
- A list of application binary objects to check.
OUTPUT¶There is one line per problem (there may be multiple problems per binary checked) which look like the following:
If private symbol usage: filename: PRIVATE (library:private_version) private_sym
If evolving symbol usage: filename: EVOLVING (library:evolving_vers) evolving_sym
If file statically linked in a system archive library: filename: STATIC_LINK (archive)
If checking of the file was skipped: filename: SKIP (reason)
Under use of the deleted class in the -O override file option, these problems may be found:
(library will be "unbound" if the symbol was unbound)
If an entire library has been deleted on some release or is otherwise unstable to use: filename: UNSTABLE_LIB: library-soname = library-path
(library-path may be "file not found" if the library could not be found)
The following problems will cause a fatal error unless the -k option is used:
If the dynamic linker found no dynamic bindings: filename: NO_BINDINGS
If ldd -r with LD_DEBUG=files,bindings failed: filename: LDD_ERROR
In these latter three cases run ldd -r on the binary file for more information on what went wrong (note that abicheck runs ldd -r with LD_DEBUG=files,bindings set). On some systems the dynamic linker will not process SUID programs with LD_DEBUG set (this usually results in NO_BINDINGS in the abicheck output).
Note that if you are running abicheck on a shared library (for example, libfoo.so) that has not been built with -l lib flags to record its library dependencies, then the "unbound symbols" problem is very likely. There is not much that can be done besides rebuilding the library or checking an application binary that uses the library and using the -l option of abicheck.
EXIT STATUS¶The following exit values are returned:
- No errors and no problems found.
- A fatal error occurred.
- No fatal errors occurred, but some binaries had problems detected.
NOTES¶Only ELF objects are checked.
In the -s -S -d and -O dbfiles the '#' character starts a comment line in the usual way.
Unless one is using the "::" custom matches supplied via the -p or -e flags, abicheck can only check against system libraries that have had symbol versioning applied to them (i.e. the private and/or evolving information recorded for each symbol in the library itself). For more info about symbol versioning, see the "Solaris Linker and Libraries Guide" answerbook at the URL http://docs.sun.com/ab2/coll.45.13 and the Commands/Version-Script section of the GNU linker "ld" info page.
The default symbol version name matching patterns are case insensitive matches to the strings "private" and "evolving" for the private and evolving cases, respectively.
Odd filenames containing the single-quote character or newline will be skipped; such characters interfere with calling commands via the shell.
To recurse directories use find(1) and either collect the output to a file for use with the -f option, or in a pipe in via:
find ... | abicheck -f - ...
BUGS¶The program is dependent on the form of the runtime linker's debug output. Since this output is intended to be human readable rather than machine readable, abicheck will break whenever the output format changes. On Solaris it is possible that the Link Auditing C interface could be used to avoid this problem.
On Linux when ldd(1) is run on a SUID binary, it (ldd and the dynamic-linker) will sometimes actually run the binary. On Linux SUID/SGID binaries are currently skipped even if the user is root; test unprivileged copies instead.
SEE ALSO¶ld(1), ldd(1),
|26 August 2003|