NAME¶
slirpvde - Virtual Distributed Ethernet-Slirp interface
SYNOPSIS¶
slirpvde OPTIONS [
socketdir ]
DESCRIPTION¶
slirpvde is a slirp interface for a VDE network.
Slirpvde connects all the units (virtual or real machines) to the network of the
host where slirpvde runs as it were a NAT/Masquerading router. The default
route is the node 2 (10.0.2.2 in the default network configuration) and DNS is
re-mapped in node 3 (10.0.2.3).
Slirpvde runs using standard user privileges (no need for root access): all the
connections are re-generated by slirpvde itself.
IPv4 only. IPv6 is still unsupported (will be supported when slirpvde will be
rewritten using the LWIPv6 network stack).
OPTIONS¶
- -s, --sock, --socket, --vdesock, --unix directory
- specify the VDE switch directory (default /var/run/vde.ctl). The VDE
switch directory can be also specified at the end of the command, as
illustrated by the optional parameter socketdir in the synopsis
section, above. When '-' is used in place of the VDE switch directory,
slirpvde works as a plug (see vde_plug(1)). The command:
dpipe vde_plug = ssh remote.machine.org slirpvde -
which is the same as:
dpipe vde_plug = ssh remote.machine.org slirpvde -s -
connects the default local switch to a remote slirpvde.
- -p, --pidfile filename
- specify the name of the file which contains the PID of slirpvde.
- -g, --group group
- specify the UNIX group for the VDE communication socket.
- -m, --mod mode
- specify the octal UNIX permissions for the VDE communication socket.
- -P, --port port
- specify the port of the vde switch whern slirpvde must be connected.
- -d, --daemon
- detach from terminal and run slirpvde in background.
- -H, --host address [ / masklen ]
- specify the host address (default 10.0.2.2/24). This option automatically
defines the network. e.g.
-H 192.168.55.1
or:
--host 10.1.2.3/16
The default value for masklen is 24. If the host part of the address
is zero this option defines only the network. The default host addr is
addr 2, the default dns proxy is 3. e.g.
-H 10.1.0.0/16
defines the network only. The host address is 10.1.0.2 and the DNS proxy
10.1.0.3.
- -n, --network address [ / masklen ]
- specify the network address (default 10.0.2.0/24). Deprecated, it has been
included for back compatibility only. It is an alias of -H,
--host.
- -N, --dns address
- Specify the address of the dns server. If this is an address inside the
slirp network, slirvde acts as a dns proxy on that address. The slirpvde
dhcp server sends this dns address to the clients. By default this is the
host number 3 in the slirpvde network. Using the default network it is
10.0.2.3. Warning: do not use the same address for host and dns.
- -D, --dhcp
- turn on the DHCP server for the network autoconfiguration of all the units
connected to the VDE. It is possible to specify the start address assigned
by the DHCP server as follows:
--dhcp=10.1.1.44
DHCP assign addresses starting at host number 15 by default. Using the
default network it starts from 10.0.2.15
- -L port:vde_host:vde_hostport
- specifyes a TCP port redirection. All the TCP packets received by the host
running slirpvde at port port will be forwarded to vde_host
at port vde_hostport.
- -U port:vde_host:vde_hostport
- specifyes a UDP port redirection. All the UDP packets received by the host
running slirpvde at port port will be forwarded to vde_host
at port vde_hostport.
- -X vde_host[:display.[screen]]i
- redirect a X window screen of a virtual machine. Slirpvde gets the first
unused X display on the host running slirpvde and redirects all the
requests to vde_host. display and screen] must be
specified when different from :0.0.
- -x port:unix_socket_path]
- redirect a port of the virtual router (usually 10.0.2.2) to a unix stream
socket. It is used for example to redirect a X display of the hosting
computer on the virtual network. e.g. -x6000:/tmp/.X11-unix/X0. (A
suitable xhost configuration is needed (e.g. 'xhost local:').
- -t, --tftp pathname
- slirpvde enables a tftp server sharing (read-only) the directory at
pathname.
- -q, --quiet
- Quiet; do not write anything to standard output.
NOTICE¶
Virtual Distributed Ethernet is not related in any way with www.vde.com
("Verband der Elektrotechnik, Elektronik und Informationstechnik"
i.e. the German "Association for Electrical, Electronic & Information
Technologies").
SEE ALSO¶
vde_switch(1),
vde_plug(1),
vde_plug2tap(1),
dpipe(1).
AUTHOR¶
VDE is a project by Renzo Davoli <renzo@cs.unibo.it>. This tool includes
software developed by Danny Gasparovski: Slirp code is by Danny Gasparovsky.
Bootp/DHCP code is by Fabrice Bellard.