NAME:¶
ripit - Perl script to create flac, ogg, mp3, m4a (aac), als (mp4), mpc, wv or
other files from an audio CD.
SYNOPSIS:¶
ripit [options]
DESCRIPTION:¶
This Perl script makes it a lot easier to create compressed sound files from an
audio CD. RipIT supports Flac, Lame, Oggenc, Faac, mp4als, Musepack, Wavpack
and ffmpeg. Artist and song titles are retrieved either with the CDDB_get.pm
from freedb.org or using WebService::MusicBrainz.pm from MusicBrainz.org.
It is possible to submit and edit CDDB entries at freedb.org, submission of
MusicBrainz data need a login. Hidden tracks and ghost songs are detected and
split into chunks of sound, a toc, cue or inf files permit to burn the WAV
files with text and no gaps in DAO mode. Several encoder formats and qualities
can be used in the same run (even the same encoder) and encoded into different
directories. Distributed ripping and launch of more than one encoder process
in the same time is possible.
Several manipulations on tags are supported, e.g. adding coverart, detection of
Various Artists style at different levels or album gain; external commands can
be launched before and after ripping / encoding is done with all CDDB
information, e.g. to ensure presence of coverart, calculation of md5sums and
playlistfiles can be done.
VERSION:¶
RipIT Version 3.9.0
OPTIONS:¶
- [track_selection]
- Tracks to rip from. If not specified, all tracks will be ripped. Specify a
single track by using a single number, or a selection of tracks using
numbers separated by commas or hyphens, e. g. 2,6,10, or 3,5,7-9. Using a
number followed by a comma or hyphen will rip from that track to the end
of the CD i. e. 3,5- rips track 3 and from track 5 to the last one.
Default: not set.
- --merge ordered list of comma separated intervals
- Place a hyphen (-) or a plus (+) between first and last track number to be
merged. Omitting the last number will merge all subsequent tracks.
Separate several intervals with commas. Default: not set.
- -I, --span start-endtime
- Define an interval to be ripped when using cdda2wav or cdparanoia. The
hyphen is mandatory. The format of start and end-time is according to
cdparanoia hh:mm:ss.ff in hours/minutes/seconds/frames, but precision is
set to seconds, i. e. frames will be ignored. Zero fields need not be
specified and the value of seconds may be larger than 60. When using
cdda2wav this option translates the values to the -o and -d options of
cdda2wav. When using option merge, endtime is related to the last track in
the selection. Default: not set.
- -o, --outputdir dir
- Where the sound should go. If not set, $HOME will be used. Default: not
set.
- -d, --device cddevice
- Path of audio CD device, default: /dev/cdrom.
- --scsidevice cddevice
- Device name for special devices if the non ripping commands (except eject
commands) shall be executed on a different device node. This might be
useful for some old SCSI devices. If not set the cddevice of option
--device will be used. Default: not set
- -r, --ripper number
- CD ripper to use, 0 - dagrab, 1 - cdparanoia, 2 -
cdda2wav, 3 - tosha, 4 - cdd. Because cdparanoia and dagrab
are the only rippers in this list that immediately fail on data tracks,
RipIT can create an error.log if problems are encountered and continues to
rip and encode without endless looping! Please use dagrab or cdparanoia,
otherwise RipIT might hang while waiting for data tracks. Default:
1 - cdparanoia.
- --ripopt options
- User definable options for specific ripper. Quote them if
necessary. Default: not set.
- --nicerip number
- Set niceness of ripping process, default: 0.
- -Z, --disable-paranoia [number]
- When using dagrab, the number of retries will be set to 3, with cdparanoia
this option is equal to the -Z option of cdparanoia. The
number can be set to 0 (paranoia on), to 1 (paranoia
off) or to 2 to switch paranoia off if a track fails or gets a
timeout. RipIT will retry that failed track without paranoia or give up.
Ripping will then continue with paranoia on. Default: 0 ‐ off, i.
e. use paranoia mode.
- --ghost
- Analyze each wav for gaps and split it into chunks if gaps are detected
and/or try to trim lead-in/out. This may override option merge. Delete
blank tracks if only silence ("zero bytes") are found.
Experimental! Default: off.
- --extend seconds
- When using option --ghost and only if a chunk of sound is detected,
enlarge chunk by amount of seconds at end if possible, or track may
be trimmed if value is small (e.g. 0.3), use with caution. Default:
2.0.
- --prepend seconds
- When using option --ghost and only if a chunk of sound is detected,
enlarge chunk by amount of seconds at beginning, if possible, or
track may be trimmed if value is small (e.g. 0.3), use with caution.
Default: 2.0.
- -c, --coder number
- Encoder(s) to use, 0 - Lame (for mp3), 1 - Oggenc, 2
- Flac, 3 - Faac, 4 - mp4als, 5 - Musepack, 6
- Wavpack, 7 - ffmpeg, a comma separated list, or as an array. The
same encoder may be stated more than once, but different
output-directories must be specified stating the --ditemplate for each
encoder or using the $quality parameter in option --dirtemplate or
--tracktemplate. See below. Default: 0.
- --faacopt Faac-options
- Pass other options to the encoder. If the same encoder has been stated
more than once, use a comma separated list. Quote them with double quotes
if needed; default: not set.
- --flacopt Flac-options
- Pass other options to the encoder. If the same encoder has been stated
more than once, use a comma separated list. Quote them with double quotes
if needed; default: not set.
- --lameopt Lame-options
- Pass other options to the encoder. If the same encoder has been stated
more than once, use a comma separated list. Quote them with double quotes
if needed; default: not set.
- --museopt Musepack-options
- Pass other options to the encoder. If the same encoder has been stated
more than once, use a comma separated list. Quote them with double quotes
if needed; default: not set.
- --musenc Musepack-encoder
- Choose Musepack encoder to be used, either mpcenc or mppenc for older
versions; default: mpcenc.
- --mp4opt Mp4als-options
- Pass other options to the encoder. Option -MP4 of encoder mp4als is
mandatory to enable tagging of sound files. Use the appropriate options to
alter compression level and speed. If the same encoder has been stated
more than once, use a comma separated list. Quote them with double quotes
if needed; default: not set.
- --oggencopt Oggenc-options
- Pass other options to the encoder. If the same encoder has been stated
more than once, use a comma separated list. Quote them with double quotes
if needed; default: not set.
- --wavpackopt Wavpack-options
- Pass other options to the encoder. If the same encoder has been stated
more than once, use a comma separated list. Quote them with double quotes
if needed; default: not set.
- --ffmpegopt ffmpeg-options
- Pass other options to the encoder. If the ffmpeg has been stated more than
once, use a comma separated list. Quote them with double quotes if needed;
default: not set.
- --ffmpegsuffix ffmpeg-suffix
- The suffix of the formats to be encoded. If ffmpeg has been stated more
than once, use a comma separated list. Quote them with double quotes if
needed; default: not set.
- -q, --quality quality
- A comma separated list of values or the word "off", passed in
the same order as the list of encoders! If no encoders passed, follow the
order of the config file! Quality for oggenc: (1-10), highest = 10;
compression level for Flac: (0-8), lowest compression = 0; quality for
Lame in vbr mode: (0-9), best quality = 0; or quality for Faac: (10-500),
highest = 500; mp4als seems not to accept any compression level, set to
zero; quality for Musepack: (0-10), best quality = 10; default:
5,3,5,100,0,5. Wavpack and ffmpeg have no quality switch, use encoder
options instead. The value "off" turns option quality off.
E. g. --coder 2,0,1,3 --quality 3,4,5,300 sets compression
level for Flac to 3, Lame-quality to 4, Oggenc-quality to 5 and Faac
quality to 300.
- -v, --vbrmode mode
- Variable bitrate, only used with Lame, mode is new or old,
see the Lame manpage. The Lame-option quality will be changed to -V
instead of -q if vbr-mode is used; default: not set.
- -b, --bitrate rate
- Encode "mp3" at this bitrate for Lame. If option
--vbrmode used, bitrate is equal to the -b option, so one
might want to set it "off"; or set if "off" if all
options are passed to --lameopt! Default: 128.
- -B, --maxrate rate
- maxrate (Bitrate) for Lame using --vbrmode is equal to the
-B option in Lame or the -M option in Oggenc, default:
0.
- -S, --preset mode
- Use the preset switch when encoding with Lame. Combined with option
--vbrmode new the preset fast will be used. Use --vbrmode
old not to use fast VBR. Mode is one of:
insane (320 kbps @ CBR),
extreme (256 kbps),
standard (192 kbps) or
medium (160 kbps) or any other valid bitrate.
Default: off.
- -W, --chars [list]
- Exclude special characters in file names and path. The argument is
optional. The argument accepts a list of any characters. One might
escape the characters or use double quotes to pass them on the command
line. The argument also accepts the words NTFS, HFS or
off. Following characters will be erased, if no argument stated or
the word NTFS is passed: |\:*?$ plus blanks and periods at beginning and
end of file names and directories. When using the word HFS, only colons
will be purged plus blanks and periods at beginning of file names and
directories. Pass the word "off" as argument to set the option
off again. Default: off.
- --comment comment
- Specify a comment for the comment-tag for Lame, Faac and Musepack,
or the description-tag for Oggenc and Flac. The special comment
cddbid or discid will place the cddbid (used by freedb) or
the discid (used for MusicBrainz) into the comment. Default: not set.
- -g, --genre genre
- Specify (and override CDDB) genre, must be a valid ID3-genre if
using Lame, can (but shouldn't) be anything if using other encoders,
default: not set.
- -y, --year year
- Specify (and override CDDB) the year of year-tag for Lame, Faac and
Musepack, or the date-tag for Oggenc and Flac. Default: not set.
- --coverart number
- a comma separated list of numbers (if several encoders are used) according
to option --coder with values 0 (no) or 1 (yes), default 0.
- --coverpath path
- Path to the coverart picture to be included in the metadata of the sound
files. The picture must be present or e.g. acquired using the --precmd
option. Default: not set.
- --mp3tags FRAME=tag
- Additional tags to be added to the mp3 file(s) if encoder does not
support the frame or if some unofficial FRAMEs shall be used (e.g.
a compilation tag set to 1: TCMP=1). More than one --mp3tags can be used
if several tags shall be added. Default: not set.
- --vatag number
- Analyze tracknames for "various artists" style and split the
metadata in case one of the delimeters (colon, hyphen, slash or
parenthesis) are found. Use unpair numbers for the scheme "artist ?
tracktitle" and pair numbers in the opposite case. The artist will be
compared to the argument of option --vastring (see below). If the artist
must be like --vastring and each track have a delimeter, use 1 (2), if the
artist must be like --vastring while only some tracks contain the
delimeter, use 3 (4), if no restrictions apply for the artist but all
tracknames must have a delimeter, use 5 (6) and finally, if only a few
tracks contain a delimeter to be used as splitting point, set --vatag to 7
(8). Default: not set.
- --vastring string
- A string (regular expression) that defines the "various artists"
style, e.g. Varios|VA. Default: \bVA\b|Variou*s|Various\sArtists
- -D, --dirtemplate '"foo parameters"'
- Use single and double quotes to pass the parameters of the templates!
Allowed are any legal characters, slashes for multi-level directories and
following parameters: $album, $artist, $iletter,
$genre, $quality, $suffix, $trackname,
$tracknum, $year and $trackno; example:
'"$suffix $quality/my_snd_dir/$iletter/$artist/$year ‐
$album"'. The parameter $iletter is the initial letter of the artist
name; $trackno is the total number of tracks of the release, this might be
helpful to distinguish different releases with exactly the same name;
$quality is needed, if one wants to encode the same format at different
qualities in the same run. Note that $quality reflects the encoder options
and not the arguments of option --quality which might be set to
"off". Or state different dirtemplates: the option is an array,
so one can use several different dirtemplates in the same order as the
encoders. If less dirtemplates than encoders are stated, the last
dirtemplate will be used for subsequent encoders and the wav-directory,
see EXAMPLES below. Default: '"$artist - $album"'.
- -T, --tracktemplate '"foo parameters"'
- See above. The tracktemplate is not an array, only one can be stated.
Default: '"$tracknum $trackname"'.
- --trackoffset number
- Give a trackoffset to be added to the $tracknum variable (see above).
Default: 0.
- --sshlist list
- Comma separated list of remote machines where RipIT should encode.
The output path must be the same for all machines. Specify the login
(login@machine) only if not the same for the remote machine. Else just
state the machine names. See EXAMPLES for more information, default: not
set.
- --scp
- If the file system can not be accessed on the remote machines, scp (copy)
the WAV files to the remote machines, default: off.
- --local
- Only used with option --sshlist; if all encoding shall be done on
remote machines, use --nolocal, default: on.
- --mb
- Access MusicBrainz DB via WebService::MusicBrainz module instead of the
http protocol (see below). One needs the discid calculation perl module or
command to be installed and in the path. Negate to switch option off
again. A non interacitve freedb lookup will be done to retrieve a genre.
Default: off.
- --mbname login
- Give the users MusicBrainz login name to submitt ISRCs to the database.
Saved in plain when using a config, default not set.
- --mbpass password
- Give the users MusicBrainz password to submitt ISRCs to the database.
Saved in plain when using a config, default not set.
- --isrc number
- Enable ISRC detection with number = 1 (using icedax) and
submission to MusicBrainz; default: 0
- -C, --cddbserver server
- CDDB server, either freedb.org, freedb2.org or musicbrainz.org. Default
freedb.org. Note, the full address is "mirror".freedb.org, i. e.
default is freedb.freedb.org. Exception: freedb2.org and musicbrainz.org
have no mirrors, their full addresses are: freedb2.org and
freedb.musicbrainz.org on port 80 (see transfer mode).
- -t, --transfer mode
- Transfer mode, cddb or http, will set default port to 8880 or 80
(for http), default: cddb. Note: use http mode with CDDB servers
freedb2.org or musicbrainz.org.
- -m, --mirror mirror
- Choose "freedb" or one of the possible freedb mirrors,
default: freedb. For more information check the webpage www.freedb.org.
There is no list of mirrors available these days. This option might be
obsolete as freedb uses random servers, but the default setting is
mandatory.
- -L, --protocol level
- CDDB protocol level for CDDB query. Level = 6 supports UTF-8 and
level = 5 not. Use level = 5 to suppress UTF-8. Cf. option
--utftag below. Default: 6.
- -P, --proxy address
- The http proxy to use when accessing the cddb server. The CDDB protocol
must be http! Default: not set.
- -n, --nice number
- Set niceness of encoding process, default: 0.
- -a, --archive
- Read and save CDDB files in $HOME/.cddb/"category" directory,
where the "category" is one of the 11 CDDB categories. Default:
off.
- -e, --eject
- Ejects the CD when finished, if hardware supports it. Use --noeject to
switch it off. Default: off.
- --ejectcmd command
- Command to be used for ejection or loading of CD tray. Should be
specified within FreeBSD even if option --eject is not used to enable
RipIT to load the CD tray. One does not need to mention the words close or
eject or options like -t, RipIT does it. Default: eject.
- --ejectopt options
- Options for ejection command to be used for ejection or loading of
CD tray. Default: the path to the CD device.
- --halt
- Powers off the machine when finished if configuration supports it,
default: off.
- -s, --submission
- Specify --nosubmission if the computer is offline and the created
file cddb.toc shall be saved in the home directory instead of being
submitted. With option --archive it will also be saved in the
$HOME/.cddb directory. Note: it is really easy to resubmit incomplete CDDB
entries! One can confirm each existing field with Enter and add a missing
genre or year. The purpose of this option is also to permit the user to
edit the CDDB data for the own filenames & tags and not to overwrite
the original CDDB entry! Default: on.
- -M, --mail address
- Users return email address, needed for submitting an entry to
freedb.org. Default: not set.
- -p, --playlist number
- Create the m3u playlist file, or use --playlist 0. For
filenames without full path use --playlist 2. Default is
full path for filenames. Default 1 - on.
- -A, --book number
- Create an audiobook file, i. e. merge all tracks into one sinlge file,
option --ghost will be switched off and file suffix will be m4b instead of
m4a. Make sure to use encoder faac, ripit will not check for the encoder
used. The installed version must support the -w option to write tags. A
chapter file will be written for chapter marks. Default: off.
- -i, --interaction
- Specify --nointeraction if ripit shall take the first CDDB entry
found and rip without any questioning. Default: on.
- --lcd
- Use lcdproc to display status, default: not set.
- --lcdhost
- Specify the lcdproc host, default: localhost.
- --lcdport
- Specify the lcdport, default: 13666.
- --infolog file
- Log operations (system calls, file/directory creation) to file
given with full path; default: not set.
- -l, --lowercase
- Lowercase filenames, default: off.
- -u, --underscore
- Use underscores (_) instead of spaces in filenames, default: off.
- --uppercasefirst
- Uppercase first letter of each word in filenames and tags. Use this option
if the CDDB entry is uppercase only. Default: off.
- -U, --utftag
- Keep Lame-tags in UTF-8 or decode them (but not the filenames) from UTF-8
to ISO8859-1. Applies only to mp3 (Lame). May be useful for tags with
special characters and if mp3-player doesn't support Unicode. Using
Musepack one might want to pass the Musepack option --unicode to option
museopt. Default: off.
- --rip
- Rip the CD, to be used as --norip if wav-files are present. Used for
debugging. Default: not set.
- --encode
- Do encode the wavs. If only the wav-files shall be created, prevent
encoding with --noencode (and use option --wav, see below).
Default: on.
- -w, --wav
- Keep the wav files after encoding instead of deleting them, default:
off.
- -N, --normalize
- Normalizes the wave-files to a given dB-value (default: -12dB). Default:
off.
This is useful when encoding
- *
- for hardware or software that doesn't support the
replaygain‐feature
- *
- to audio formats without replaygain capabilities.
- --normcmd
- Command to use for normalizing, default: normalize.
- -z, --normopt
- Options to pass to normalize. Possible values:
|
-a -nndB : |
Normalize to -nn dB, default is -12dB, |
|
Value range: |
All values <= 0dB |
|
Example : |
normalize -a -20dB *.wav |
|
-b : |
Batch mode ‐ loudness differences between |
|
|
individual tracks of a CD are maintained |
|
-m : |
Mix mode ‐ all track are normalized to the |
|
|
same loudness |
|
-v : |
Verbose operation |
|
-q : |
Quiet operation |
For further options see normalize documentation
(http://normalize.nongnu.org). Please note that normalizing to a high dB
value, e.g. -6dB or less will lead to severe compression of the audio
signal, thus losing sound quality. Keeping the default value of -12dB is
recommended.
Default: -b Option v (q) will be set according to verbosity chosen.
- --cdtoc number
- Number n = 1 to create a toc file to burn the wavs with CD-Text
using cdrdao or cdrecord. Default: off.
- --inf number
- Number n = 1 to create inf files to burn the wavs with CD-Text
using wodim or cdrecord. Default: off.
- --cdcue number
- Number n = 1 or 2 to create cue sheets to burn the wavs with
CD-Text. The cue sheets will be copied to the other file formats. Number
1 will swith option --ghost on to eliminate chunks of silence.
Number 2 is experimental but does not switch option --ghost on and
may be used if number 1 fails. Default: off.
- -h, --help
- Print this and exit.
- -V, --version
- Print version and exit.
- -x, --verbose number
- Run silent (do not output comments, status etc.) (n = 0), with
minimal output (n = 1), normal without encoder messages (n =
2), normal (n = 3), verbose (n = 4), extremely
verbose (n = 5). Default 3.
- --config
- Read parameters from config file or specify --noconfig to prevent
reading it. A local config file in $HOME/.ripit/ will have higher
priority, only if the local file does not exist, ripit will try to read
/etc/ripit/config. Default: on.
- --save
- Add parameters passed on command line to an existing config file. This
does not overwrite other existing settings. Options of an existing config
file will be adopted and the old file saved as config.old. Default:
off.
- --savenew
- Save all parameters passed on command line to a new config file, backup an
existing file to config.old. Creates a default config file if no options
are passed on command line. Default: off.
- --loop value
- Continue ripping and encoding as soon as the previous CD finished. This
option forces ejection ( --eject). The value is either 0 for
normal use or 1 for standard looping. Experimental value 2
migth be used to force immediate restart of ripping process. This will
spoil the output, this will show the prompt although a child process is
running (waiting for a new CD) and must be terminated manually. Default:
off.
- --quitnodb value
- Give up CD if no CDDB entry found. Useful if option --loop or
--nointeraction are on. Default behaviour is to let operator enter data or
to use default artist, album and track names. Possible values: 0 - off, 1
- on, default: off
- --resume
- Resume a previously started session. Default: off.
- -O, --overwrite argument
- Default behaviour of Ripit is not to overwrite existing directories, a
suffix will be added if directory name exists. Use option overwrite to
prevent this and either overwrite a previous rip ( y) or force
Ripit to quit ( q) or even eject the disc (e). If ejection
is chosen, the disc will be ejected even if option --eject has not been
switched on. Default: off (n)
- --dpermission number
- Change the directory permission to number. Default: 0755.
- --fpermission number
- Change the file permission to number. Default: 0644.
- --md5sum
- Create a MD5-sum file for each type of sound files.
- --threads number
- Comma separated list of numbers giving maximum of allowed encoders to run
at the same time. In conjunction with option sshlist the number for the
local machine is mandatory and must be stated first. Default: 1.
- -X, --execmd command
- State a command to be executed when ripit finshed. The same
variables as in the dirtemplate can be stated. When using MusicBrainz one
can try to use $cd{asin} to get the ASIN. Make sure to escape the command
if needed. Default: not set.
- --precmd command
- State a command to be executed before ripping started. The same
variables as in the dirtemplate can be stated. When using MusicBrainz one
can try to use $cd{asin} to get the ASIN. Make sure to escape the command
if needed. Can be used to execute a script to retrieve coverart. Default:
not set.
EXAMPLES¶
To specify a CD device, type
- ripit --device /dev/sr1
To specify the output directory, type
- ripit --outputdir /foo/paths/
To rip and encode a special track selection, type
- ripit 1,3-6,8-11
To use several encoders in the same run, type
- ripit --coder 1,0,2 --quality 3,5,6
To use Lame with variable bitrate (VBR), type
- ripit --vbrmode new --bitrate 0
Note, one should reset the
--bitrate to 0 (zero) if the
-b option
of Lame is not desired. According to VBR mode in Lame, use "new" or
"old".
It is recommended to use the preset switches for Lame, (see Lame man-page) and
specify fast encoding with
--vbrmode new (use
--vbrmode old to
switch off the fast encoding)
- ripit --preset extreme --vbrmode new
To pass options related to the encoder use the according encoder option switch:
e.g. to use the managed mode with oggenc:
- ripit -c 1 --oggencopt "--managed -b 192 -M 224 -m
96" --quality "off"
Normalize your wave-files prior to encoding:
- ripit --normalize
Normalize your files to -18dB using "mix mode" (see normalize
documentation)
- ripit --normalize --normopt "-m -a -18dB"
To define a directory template where the sound files should go, type
- ripit --dirtemplate '"$artist - $year"'
To create 2 directory levels, as used in other environments, type
- ripit --dirtemplate '"$artist/$album"'
To save a config file in ~/home/.ripit/ with options: to use Lame and Oggenc,
don't create a m3u file, archive the CDDB entry files in
~/.cddb/"category"/ and to eject CD when done, type
- ripit --coder 0,1 --playlist 0 --archive
--eject --save
To do the job without any interaction, type
- ripit --nointeraction
To use a network for encoding, make sure that the output paths are equal on all
machines!
- ripit --sshlist sun,saturn,earth
where sun, saturn and earth are remote machines on which a user can login via
ssh without entering a password or passphrase! Note that the paths must be
equal for the user on all remote machines! If the login is different on some
machines, try
- ripit --sshlist login1@sun,login2@saturn,login3@earth
If there is "no" identical path on the remote machines, then the user
might enter e.g. /tmp/ as output directory. If the file-system is not mounted
on each remote machine, one can try to copy the wavs to the remote machines
using option
--scp.
- ripit --sshlist sun,saturn,earth --scp
Check for ghost songs and trim very long lead-in/out:
- ripit --ghost --prepend 1.0 --extend 1.0
Rip only first 30 seconds of each track (useful for testing)
- ripit --span 0-30
Encode the same format in 2 qualities, at low quality for a portable, at high
quality for home:
- ripit --dirtemplate '"cbr/$artist/$year ‐ $album"'
\
--dirtemplate '"preset/$artist ‐ $album"' \
--coder 0,0 --bitrate off --quality off,off \
--lameopt "-b 128 -q 2;--preset extreme"
Force RipIT to use one and the same directory for all sound files:
- ripit --dirtemplate '"/"'
--outputdir="/media/sound" \
--resume
FILES¶
User config file (/etc/ripit/config will only be used if there is no
$HOME/.ripit/config):
- $HOME/.ripit/config
/etc/ripit/config
- /usr/share/doc/packages/ripit/README
/usr/share/doc/packages/ripit/HISTORY
/usr/share/doc/packages/ripit/LICENSE
BUGS¶
Probably there are more than some.
SEE ALSO¶
cdparanoia(1),
lame(1),
oggenc(1),
flac(1), normalize(1), cdda2wav(1), ffmpeg(1)
AUTHORS¶
RipIT is now maintained by Felix Suwald, please send bugs, wishes comments to
ripit_[at]_suwald_[dot]_com with a concise subject.
For bugs, wishes and comments about lcdproc, please contact
max.kaesbauer_[at]_gmail_[dot]_com.
Former maintainer: Mads Martin Joergensen; RipIT was originally developed by
Simon Quinn.
This manpage was originally created for the Debian GNU/Linux system by help2man
1.36 and optimized by Elimar Riesebieter <riesebie@lxtec.de>, enhanced
and updated by Felix Suwald.