NAME¶
pnmtotiffcmyk - convert a portable anymap into a CMYK encoded TIFF file
SYNOPSIS¶
pnmtotiffcmyk [
Compargs][
Tiffargs][
Convargs][
pnmfile ]
- Compargs:
- [-none|-packbits|-lzw [-predictor
n]]
- Tiffargs:
- [-msb2lsb|-lsb2msb] [-rowsperstrip n]
[-lowdotrange n] [-highdotrange n]
[-knormal|-konly|-kremove]
- Convargs:
- [[-default][Defargs]|-negative]
- Defargs:
- [-theta deg] [-gamma n] [-gammap
-1|-gammap n]
DESCRIPTION¶
Reads a portable anymap as input. Produces a CMYK encoded TIFF file as output.
Optionally modifies the colour balance and black level, and removes CMY from
under K.
OPTIONS¶
The order of most options is not important, but options for particular
conversion algorithms must appear after the algorithm is selected
(
-default,
-negative). If no algorithm is selected then
-default is assumed and the appropriate options
(
-theta,
-gamma,
-gammap) can appear anywhere.
- -none,-packbits,-lzw,-predictor
- Tiff files can be compressed. By default LZW decompression is used, but
(apparently) some readers cannot read this, so you may want to select a
different algorithm (-none,-packbits). For LZW compression,
a -predictor value of 2 forces horizontal differencing of scanlines
before encoding; a value of 1 forces no differencing.
- -msb2lsb,-lsb2msb
- These flags control fill order (default is -msb2lsb).
- -rowsperstrip
- This sets the number of rows in an image strip (data in the Tiff files
generated by this program is stored in strips - each strip is compressed
individually). The default gives a strip size of no more than 8 kb.
- -lowdotrange,-highdotrange
- These options set tag values that may be useful for printers. They have
not been tested.
- -knormal,-kremove,-konly
- These options modify the values written to the Tiff file after the
conversion calculations (described below) are completed. They are useful
only for testing and debugging the code.
-kremove sets the black (K) layer to zero while -konly sets
all inks to the black value.
- -default,-negative
- -negative selects a simple algorithm that generates a colour
negative. None of the following options apply to this algorithm, which is
included as an example in the source to help implementors of other
conversions. -default is not needed, unless it is used to
countermand a -negative on the same command line. The default
conversion from RGB to CMYK can be modified by altering the options listed
below.
The CMYKTiff web site includes tests on the conversion parameters. The test
images illustrate the command line options in practice and may make the
following explanation clearer.
- -theta deg
- The basic conversion from RGB to CMY uses C = 1-R, M = 1-G, Y = 1-B.
-theta provides a simple correction for any colour bias that may
occur in the printed image because, in practice, inks do not exactly
complement the primary colours. It rotates the colours by the amount given
(deg) in degrees. Unless you are trying to produce unusual effects
you will need to use small values (try generating three images at -10, 0
(the default) and 10 degrees and seeing which has the best colour
balance.
- -gamma n
- The black (K) component of the image is calculated as min(C,Y,M).
-gamma applies a gamma correction to this level. In other words,
the final black level is K (normalised to the range 0 to 1) raised to the
nth power. In practice this means that a value greater than 1 makes
the image lighter and a value less than 1 makes the image darker. The
range of allowed values is 0.1 to 10.
- -gammap n
- This option controls the removal of CMY under K. If n is -1 then no
removal occurs and C, M, Y and K are calculated as above. This means that,
when printed, dark areas contain all four inks, which can make high
contrast areas, like lettering, appear fuzzy.
By default, when -gammap is not given on the command line, the
colours are reduced in dark areas by subtracting the black level. The
value subtracted is calculated with the same gamma correction given by
-gamma. Hopefully this will reduce fuzziness without changing the
appearance of the image significantly.
If -gammap n is given, with n between 0.01 and 10, then
black is still subtracted, but the subtracted value is calculated using
n rather than any value supplied with -gamma. For example,
it may be best to only subtract black from the coloured inks in the very
darkest regions. In that case, n should be a large value, such as
5.
BUGS¶
This program is not self-contained. It must be used with NetPbm and libtiff must
be available (libtiff is included in the 1mar94 release of NetPbm).
SEE ALSO¶
pnmtotiff(1),
tifftopnm(1),
pnm(5)
AUTHOR¶
Copyright (c) 1999 Andrew Cooke (Jara Software). Released under the GPL with no
warranty. See source or COPYRIGHT and LICENCE files in distribution for full
details.
Much of the code (and man page!) uses ideas from other pnm programs, written by
Jef Poskanzer (thanks go to him and libtiff maintainer Sam Leffler). A small
section of the code - some of the tiff tag settings - is derived directly from
pnmtotiff, by Jef Poskanzer, which, in turn, acknowledges Patrick Naughton
with the following text:
- Derived by Jef Poskanzer from ras2tif.c, which is:
- Copyright (c) 1990 by Sun Microsystems, Inc.
- Author: Patrick J. Naughton naughton@wind.sun.com
- Permission to use, copy, modify, and distribute this software and its
documentation for any purpose and without fee is hereby granted, provided
that the above copyright notice appear in all copies and that both that
copyright notice and this permission notice appear in supporting
documentation.
- This file is provided AS IS with no warranties of any kind. The author
shall have no liability with respect to the infringement of copyrights,
trade secrets or any patents by this file or any part thereof. In no event
will the author be liable for any lost revenue or profits or other
special, indirect and consequential damages.